Synthesis and swelling properties of protein‐poly(acrylic acid‐co‐acrylamide) superabsorbent composite

A novel superabsorbent polymer composite was synthesized by graft copolymerization of cottonseed protein and acrylic monomers in order to explore the new application of cottonseed protein in nonfood field. This composite was synthesized by solution based copolymerization, using partly neutralized acrylic acid, acrylamide and cottonseed protein as raw material, N,N‐methylene bisacrylamide as crosslinking agent, potassium persulphate and sodium sulfite as the initiators. The effects of the certain variables of the copolymerization on the water absorbency of the synthesized composite were measured. The chemical structure of the composite was characterized by means of Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetry analysis. The swelling properties of the composite were carried out under varying pH conditions. Further, the saline sensitivity, swelling kinetics and water retention ability of the composite was investigated. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation of bentonite–poly[(acrylic acid)‐acrylamide] water superabsorbent by photopolymerization

A novel bentonite–poly[(acrylic acid)‐acrylamide] superabsorbent composite with water and salt solution absorbencies of 450 and 108 times its own weight, respectively, was successfully synthesized by photopolymerization of acrylic acid with acrylamide in the presence of bentonite powder using 30 min of ultraviolet irradiation at room temperature. The results show a synergetic effect of Michler's ketone and benzophenone mixed photoinitiators on the water absorbency, and incorporation of bentonite below 10 wt% into the water superabsorbent can slightly increase the water and salt solution absorbencies, and improve water retention, as demonstrated using thermogravimetric analysis and differential scanning calorimetry. Fourier transform infrared spectroscopy allowed the determination of the structure of the bentonite composite superabsorbent. Copyright © 2006 Society of Chemical Industry     

Synthesis and properties of a novel superabsorbent polymer composite from microwave irradiated waste material cultured Auricularia auricula and poly (acrylic acid‐co‐acrylamide)

A novel superabsorbent polymer composite was successfully synthesized from waste material cultured Auricularia auricula (WMCAA) and poly (acrylic acid‐co‐acrylamide) (P(AA‐co‐AM)) using microwave irradiation. Optimal synthesis conditions were determined by investigating the water absorbency of the superabsorbent composite. The effects associated with weight ratios of WMCAA, acrylamide (AM) monomers, initiators, and acrylic acid (AA) crosslinkers, as well as the degree of neutralization of AA were examined. The maximum water absorbencies were found to be 1548 g/g (distilled water) and 72 g/g (0.9% NaCl solution). Fourier transform infrared spectroscopy (FTIR) was applied to determine the molecular structure of the superabsorbent composite, and scanning electron microscopy (SEM) was used to demonstrate the characteristic compact and porous structure of the material. Further studies conducted via transmission electron microscopy (TEM) revealed the formation of a novel interpenetrating polymer network structure. Thermogravimetry/differential thermal (TG/DTG) analysis demonstrated improved thermal stability in the composite material compared with WMCAA. Additionally, high water absorption rates observed in the polymer during the swelling process indicated first‐order kinetics. The water absorption and adsorption of the superabsorbent composite were studied in a variety of fertilizer solutions, revealing an indirect relationship between water absorbing ability and fertilizer concentration. Conversely, a direct relationship was observed between absorbed fertilizer and fertilizer concentration. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3674–3681, 2013     

Preparation and properties of porous poly(sodium acrylate‐co‐acrylamide) salt‐resistant superabsorbent composite

A novel semi‐interpenetrating polymer networks (semi‐IPNs) porous salt‐resistant superabsorbent composite was prepared by copolymerization of partially neutralized acrylic acid and acrylamide using polyethylene glycol as semi‐IPNs composite, N,N′‐methylenebisacrylamide, triene propanol phosphate, and trihydroxymethyl propane glycidol ether as crosslinking agents, methanol, propanol, and butanol as foaming agents, and L ‐ascorbic acid and peroxide hydrogen as initiators. To improve the properties of swollen hydrogel, such as strength, resilience, permeabilities, and dispersion, the copolymer was surface‐crosslinked, and then blended with aluminum sulfate, sodium carbonate, and sodium 1‐octadecanol phosphate in the course of post treatment. The influences of reaction conditions on properties of superabsorbent composite were investigated and optimized, and the water absorbency of superabsorbent composite prepared at optimal conditions in 0.9 wt% NaCl aqueous solution under atmospheric pressure and certain load (P ≈ 2 × 10³ Pa) were 61 g g^?1 and 16.7 g g^?1, respectively. Moreover, the swelling rate reached 22.003 × 10^?3 g (g s)^?1. And the excellent hydrogel properties, such as hydrogel strength, resilience, permeabilities, and dispersion were also obtained. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Preparation of starch‐graft‐poly(acrylamide)/attapulgite superabsorbent composite

A novel starch‐graft‐poly(acrylamide)/attapulgite superabsorbent composite was synthesized by graft copolymerization reaction of starch, acrylamide (AM), and attapulgite micropowder using N.N‐methylene‐bisacrylamide (MBA) as a crosslinker and ammonium persulphate (APS) as an initiator in aqueous solution, followed by hydrolysis with sodium hydroxide. The effects on water absorbency, such as amount of crosslinker, initiator, attapulgite, weight ratio of acrylamide to starch in the feed, gelatinization conditions of starch and molar ratio of NaOH to acrylamide, and so forth, were investigated. These superabsorbent composites were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The water absorbencies for these superabsorbent composites in water and saline solution were investigated, and water retention tests were carried out. Results obtained from this study showed that the water absorbency of superabsorbent composite synthesized under optimal synthesis conditions with an attapulgite content of 10% exhibit absorption of 1317 g H₂O/g sample and 68 g H₂O/g sample in distilled water and in 0.9 wt % NaCl solution, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1351–1357, 2005     

Preparation and slow‐release property of a poly(acrylic acid)/attapulgite/sodium humate superabsorbent composite

A novel poly(acrylic acid)/attapulgite (APT)/sodium humate (SH) superabsorbent composite was synthesized through the graft copolymerization reaction of acrylic acid on APT micropowder and SH with N,N′‐methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator in an aqueous solution. Various effects on the water absorbency, including the amounts of the crosslinker, initiator, APT, and SH, were investigated. The superabsorbent composite was characterized with Fourier transform infrared spectroscopy and scanning electron microscopy. The superabsorbent composite synthesized under optimal synthesis conditions with an APT concentration of 20% and an SH concentration of 20% exhibited absorption of 583 g of H₂O/g of sample and 63 g of H₂O/g of sample in distilled water and in a 0.9 wt % NaCl solution, respectively. The slow‐release property of SH from the superabsorbent composite into water was measured, and a test of the water retention of the superabsorbent composite in soil was also carried out experimentally with and without the superabsorbent composite. The results showed that the superabsorbent composite had not only good water retention but also an additional slow‐release property of SH. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 37–45, 2007     

Fast‐swelling oxidized starch phosphate–poly(acrylate/acrylamide/2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid) superabsorbent composite

A fast‐swelling superabsorbent composite was prepared by solution polymerization of acrylate, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid and oxidized starch phosphate. Ethanol, propyl alcohol, butyl alcohol, and sodium bicarbonate were used as foaming agents to produce fast‐swelling characteristics. The structure of the superabsorbent composite was characterized using Fourier transform infrared spectroscopy (FTIR). The influences of the amount of water, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid, oxidized starch phosphate, initiator, and trihydroxymethyl propane glycidol ether, as well as the neutralization degree of acrylic acid on the equilibrium swelling degree and swelling rate of the superabsorbent composite, were investigated. The equilibrium swelling degree of the superabsorbent composite prepared in a 0.9 wt% NaCl aqueous solution was 52 g g^?1, and the swelling rate reached 0.86 mL g^?1 s^?1. The swelling kinetics was also investigated, and the results indicate that swelling of the superabsorbent composites obeys Schott's pseudo second‐order kinetics model. POLYM. ENG. SCI., 56:1267–1274, 2016. © 2016 Society of Plastics Engineers     

Preparation and water absorbency of a novel poly(acrylate‐co‐acrylamide)/vermiculite superabsorbent composite

A novel poly(acrylate‐co‐acrylamide)/expanded vermiculite (EVMT) superabsorbent composite was synthesized by aqueous solution polymerization method. The water absorbency of the superabsorbent composite still reaches 850 g/g when 50 wt % EVMT is added, which is significant in decreasing the production cost of the superabsorbent composites. By controlling the molar ratio of acrylic acid monomer and acrylamide monomer, and neutralization degree of acrylic acid, the hydrophilic groups on the composite can be adjusted, and it is found that the collaborative absorbent effect of ? CONH₂, ? COOK, and ? COOH groups is superior to that of single ? CONH₂, ? COOK, or ? COOH group. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 735–739, 2007     

Synthesis,characterization, and swelling behavior of alginate‐g‐poly(sodium acrylate)/kaolin superabsorbent hydrogel composites

A novel superabsorbent composite based on sodium alginate and the inorganic clay kaolin was synthesized via the graft copolymerization of acrylic acid (AA) in an aqueous medium with methylene bisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The effects of reaction variables, such as the MBA, AA, and APS concentrations and the alginate/kaolin weight ratio, on the water absorbency of the composite were systematically optimized. Evidence of grafting and kaolin interactions was obtained by a comparison of the Fourier transform infrared spectra of the initial substrates with that of the superabsorbent composite, and the hydrogel structure was confirmed with scanning electron microscopy. The results indicated that with an increasing alginate/kaolin weight ratio, the swelling capacity and gel content increased. The effects of various salt media were also studied, along with the swelling kinetics. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation of a kaolinite–poly(acrylic acid acrylamide) water superabsorbent by photopolymerization

A novel kaolinite–poly(acrylic acid acrylamide) water superabsorbent with a water absorbency and salt solution absorbency of 433 and 108 g/g, respectively, was successfully synthesized by the photopolymerization of acrylic acid with acrylamide in the presence of kaolinite powder under 30 min of ultraviolet irradiation at room temperature. The results showed a synergetic effect of the mixed photoinitiators (Michler's ketone and benzophenone) on the water absorbency, and the incorporation of less than 10 wt % kaolinite into the water superabsorbent slightly improved the water absorbency and salt solution absorbency and obviously upgraded the water retention, as demonstrated by retention testing as well as thermogravimetric analysis and differential scanning calorimetry. Fourier transform infrared spectroscopy verified the structure of the kaolinite composite superabsorbent. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2875–2881, 2006     

Study on superabsorbent composite XXV. Synthesis,characterization, and swelling behaviors of poly(acrylic acid‐co‐N‐acryloylmorpholine)/attapulgite superabsorbent composites

In this work, a novel poly(acrylic acid‐co‐N‐acryloylmorpholine)/attapulgite superabsorbent composite was prepared by graft copolymerization among acrylic acid, N‐acryloylmorpholine and attapulgite in aqueous solution, using N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The result from FTIR spectra showed that  OH of attapulgite participated in graft copolymerization with acrylic acid and N‐acryloylmorpholine. Proper monomer ratio and atapulgite content could form a loose surface, and improve reswelling ability and initial swelling rate. The buffer action of the  COOH and  COO⁻ groups in the superabsorbent composite keeps the water absorbency a rough constant in the pH range of 4.4–9.6. Both polarity and structure of an organic solvent are responsible for the phase transition point of the superabsorbent composite. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Gamma‐radiation initiated synthesis of Psyllium and acrylic acid‐based polymeric networks for selective absorption of water from different oil–water emulsions

Removal of water from the crude petroleum during its extraction and refining process is one of the major problems faced by petroleum industries, so in this study a superabsorbent has been synthesized from Psyllium and acrylic acid based polymers under the influence of gamma radiations using hexamine as a crosslinker. After optimizing various reaction parameters, the optimized superabsorbent has been tested for its selective water absorption capacity from different oil–water emulsions as a function of time, temperature, pH, and NaCl concentration. The synthesized superabsorbent has been found to be highly selective toward water absorption with maximum percent swelling of 8560% in petrol–water emulsion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Study on superabsorbent composites. XVIII. Preparation,characterization, and property evaluation of poly(acrylic acid‐co‐acrylamide)/organomontmorillonite/sodium humate superabsorbent composites

A series of novel multifunctional poly (acrylic acid‐co‐acrylamide) (PAA‐AM)/organomontmorillonite (O‐MMT)/sodium humate (SH) superabsorbent composites were synthesized by the graft copolymerization reaction of partially neutralized acrylic acid and acrylamide on O‐MMT micropowder and SH with N,N′‐methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator in an aqueous solution. The superabsorbent composites were characterized by means of Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The effect of the relative weight ratio of SH to O‐MMT on the water absorbency was studied, and the results indicated that the best water absorbency of 591 g/g in distilled water was obtained when an O‐MMT content of 20 wt % and an SH content of 30 wt % were incorporated. The superabsorbent composite possessed a good capacity for water retention; even after 30 days, 24.4 wt % of water could still be saved by the sand soil containing 1.0 wt % superabsorbent composite. The results from this study show that the water absorbency of a superabsorbent composite is improved by the simultaneous introduction of O‐MMT and SH into a PAA‐AM network in comparison with the incorporation of only O‐MMT or SH. Also, in comparison with PAA‐AM/MMT/SH, an appropriate amount of O‐MMT can benefit the developed composites with respect to their water absorbency, salt resistance, and capacity for water retention in sand soil. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of poly(sodium acrylate‐co‐2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid)/attapulgite as a salt‐resistant superabsorbent composite

A novel salt‐resistant superabsorbent composite was prepared by copolymerization of partially neutralized acrylic acid, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid (AMPS) and attapulgite (APT). To enhance the swelling rate (SR) of the copolymer, sodium bicarbonate was used as a foaming agent in the course of copolymerization. Furthermore, for improving the properties of swollen hydrogel, such as strength, resilience and dispersion, the copolymer was surface‐crosslinked with glycerine and sodium silicate, and then the surface‐crosslinked copolymer was blended with aluminum sulfate and sodium carbonate in post treatment process. The influences of some reaction conditions, such as amount of AMPS, APT, and initiator, and neutralization degree of acrylic acid on water absorbency in 0.9 wt% NaCl aqueous solution both under atmospheric pressure (WA) and load (WA_P, P ≈ 2 × 10³ Pa) were investigated. In addition, the effect of them on SR was also studied. The WA and WA_P of the superabsorbent composite prepared under optimal conditions in 0.9 wt% NaCl aqueous solution were 52 g·g^?1 and 8 g·g^?1, respectively. Besides, the SR was fast, and it could reach 0.393 mL·(g·s)^?1. Moreover, the swollen hydrogel possessed excellent salt resistance, hydrogel resilience and dispersion. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Synthesis of poly(AA‐co‐AM) superabsorbent composites by reinforcement of halloysite nanotubes

A novel poly(acrylic acid‐co‐acrylamide)/halloysite nanotubes [PAA‐AM/HNTs] superabsorbent composite was synthesized by free radical polymerization with using HNTs as an inorganic additive. The composite was characterized by Fourier transform infrared spectroscopy, scanning electron microscope, and thermogravimetric analysis. The results revealed that HNTs and PAA‐AM were combined well together to form a porous structure with a pore size of about 10 μm, and HNTs were uniformly distributed in the composite. The thermal stability was improved by adding HNTs in the composite. The influences of contents of initiator and halloysite, neutralization degree of AA, and molar ratio of AM to AA on water absorbency were investigated. The water absorbency and the water retention capacity were improved after adding HNTs into PAA‐AM. The composite containing 10% HNTs had the highest water absorbency of 1276 g/g in distilled water. Moreover, PAA‐AM/HNTs composite also had a high swelling rate within 60 min and could maintain 78% initial swelling capability after five reswelled test. The substantial enhancement of swelling properties enables PAA‐AM/HNTs suitable for numerous practical applications. POLYM. COMPOS., 36:229–236, 2015. © 2014 Society of Plastics Engineers     

Swelling behaviors of a three‐component copolymer (starch graft sodium acrylate and 2‐acrylamido‐2‐methyl‐propanosulfonic acid) synthesized by microwave polymerization

A superabsorbent of starch, 2‐acrylamido‐2‐methyl‐propanosulfonic acid (AMPS), and sodium acrylate was synthesized by microwave irradiation, and the effect of AMPS on the performance of the polymer was investigated. The best mass fraction of the three components was determined (starch/acrylic acid/AMPS = 2 : 5 : 3). The structure of the polymer was characterized by Fourier transform infrared, ¹³C cross‐polarization/magic‐angle spinning NMR, and scanning electron microscopy, and the morphology of the surface of the sample was studied. The results showed that the morphology of the polymer was changed to some extent under microwave irradiation, and the swelling rate of the polymer synthesized by microwave polymerization was faster than the swelling rate of a polymer synthesized by a traditional method. The best absorbent capacities of the product in distilled water and a 0.9% sodium chloride solution were 450 and 53 g/g, respectively. Meanwhile, the introduction of AMPS to a superabsorbent resin was an effective method for improving the performance of the polymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1050–1054, 2005     

Effect of hydrophobic monomer on the synthesis and swelling behaviour of a collagen‐graft‐poly[(acrylic acid)‐co‐(sodium acrylate)] hydrogel

BACKGROUND: Graft polymerization of vinylic monomers onto natural backbones is an efficient approach for the synthesis of natural‐based superabsorbents. The nature of the monomers will affect the swelling behaviour of the superabsorbents. Here, a novel superabsorbent was synthesized through grafting of acrylic acid onto collagen in the presence of hydrophobic styrene as co‐monomer. Subsequently, the effect of styrene on the swelling behaviour of the superabsorbent was studied. RESULTS: The highly swelling superabsorbent was prepared by introducing styrene into a collagen‐graft‐poly(acrylic acid) hydrogel. By inclusion of styrene monomer, the swelling capacity of the hydrogel was increased; this is discussed according to the network composition. The effect of swelling media (salt solutions and various pH values) was investigated. The results of absorbency under load showed that hydrogels containing phenyl groups exhibit better behaviour; however, by introducing styrene, the rate of water uptake and resistance to water holding under heating was reduced. Scanning electron micrographs of hydrogels revealed a decrease in porosity on using styrene. CONCLUSION: Inclusion of styrene monomer in the ionic superabsorbent caused high swelling capacity with better absorbency under load. This can be used to prepare highly swelling superabsorbents with good mechanical properties. The pH reversibility of the synthesized superabsorbent makes it a candidate for use in the controlled release of drugs and in agrochemicals. Copyright © 2008 Society of Chemical Industry     

CMC-g-PAMPS/APT复合高吸水树脂的溶胀行为及热稳定性能

以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为单体,凹凸棒黏土(APT)和羧甲基纤维素钠(CMC)为复合组分,采用微波辐射方法制备了CMC-g-PAMPS/APT环境友好复合高吸水性树脂。考察了APT用量对树脂吸水速率、保水性能和反复吸水性能的影响,利用XRD和TG等方法分析了该树脂的结构及其热稳定性能。结果表明,APT和CMC参与了接枝共聚反应,其反应仅在APT的表面进行,单体并没有插入到APT的层间。在APT质量分数为7.5%时,树脂的分解温度主要在250℃以上,具有良好的热稳定性。经过5次反复溶胀后,树脂的吸水倍率较不含APT的树脂提高了近42%。在体系中引入APT能显著提高树脂的吸水速率和保水性能。     

Swelling study of superabsorbent PAA‐co‐PAM/clay nanohydrogel

A series of superabsorbent composites were prepared from acrylic acid (AA), acrylamide (AM), and Cloisite® 30B by aqueous solution polymerization technique using ammonium peroxodisulfate (APS) as initiator. The interaction of the organically modified nanoclay with PAA‐co‐PAM copolymer was verified by FTIR, whereas the morphology of the composite was studied by Scanning Electron Microscopy (SEM). The water absorbency in deionized water and saline water of the synthesized nanohydrogels was measured by calculating their percentage swelling ratio. The effects of copolymerization, monomer ratio, clay content, and temperature on the water absorbency were studied. The results indicated a considerable increase in swelling ratio by proper monomer proportion and incorporation of optimum clay percentage into the copolymer matrix. It was found that the nanohydrogel acquired highest water absorbency with 2% clay loading. The reswelling ability and water retention capacity of the PAA‐co‐PAM hydrogel and PAA‐co‐PAM/clay nanohydrogel were also measured. The water absorbency was found to increase after each reswelling for which it may be useful as recyclable superabsorbent material. The results of water retention capacity of the nanohydrogel were also encouraging and find application in agriculture, especially in drought‐prone areas. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of poly(acrylic acid)/sodium humate superabsorbent composite for agricultural use

A novel poly (acrylic acid)/sodium humate superabsorbent composite was synthesized by graft copolymerization reaction of acrylic acid (AA) on sodium humate micropowder using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and potassium peroxydisulfate (KPS) as an initiator in aqueous solution. The effects on water absorbency of factors such as reaction temperature, initial monomer concentration, and degree of neutralization of AA, amount of crosslinker, initiator, and sodium humate were investigated. The superabsorbent composite was characterized by scanning electron microscopy, and the graft copolymerization reaction of AA on sodium humate micropowder was characterized by IR spectroscopy. Results obtained from this study show that the water absorbency of the superabsorbent composite synthesized under optimal conditions for synthesis with a sodium humate content of 5.3% exhibited absorption of 684 g H₂O/g sample in distilled water. Water‐retention in soil is enhanced by the use of the superabsorbent composite. The effect of superabsorbent composite on the growth of corn is reported. The superabsorbent composite may be of use as water management materials for agriculture purposes in desert and drought‐prone areas. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5137–5143, 2006