Cationic Imidazolium Monomeric Surfactants: Their Synthesis and Surface Active Properties

A series of long-chain ester-based water-soluble cationics have been synthesized by using renewable raw materials like fatty acids and halogenated alcohols. The surface activity of the molecules has been determined by measurement of their conductance and surface tension in aqueous solution. The dynamics of surface activity of these surfactants have also been investigated in the presence of sodium halides (NaCl and NaBr) by surface tension measurement. A series of useful parameters like critical micelle concentration (CMC), surface tension at the CMC (γ_CMC), adsorption efficiency (pC₂₀), effectiveness of surface tension reduction (Π_CMC), Gibbs free energy of the micellization (ΔG _0mic) and Gibbs free energy of adsorption (ΔG _0ads) have been determined from the measurements obtained by surface tension and conductivity methods. Further with the application of the Gibbs adsorption isotherm, maximum surface excess concentration (Γ_max) and minimum surface area/molecule (A_min) at the air–water interface were also estimated. Thermal stability of these long chain cationics have been measured by thermal gravimetric analysis under a nitrogen atmosphere. Analysis of thermal stability measurement indicated that the thermal stability of these long chain imidazoliums increases with an increase in chain length.     

Synthesis,surface active and thermal properties of novel imidazolium cationic monomeric surfactants

A series of long chain water soluble cationics have been synthesized by using renewable raw materials like fatty alcohols and epichlorohydrin. The surface activity of the molecules has been determined by measurement of their conductance and surface tension in aqueous solution. The dynamics of surface activity of these surfactants have also been investigated in the presence of sodium halides, NaCl and NaBr by surface tension measurement. A series of useful parameters like critical micelle concentration (cmc), surface tension at the cmc (γ_cmc), adsorption efficiency (pC20), effectiveness of surface tension reduction (Π_cmc), Gibbs free energy of the micellization (ΔG_0 mic) and Gibbs free energy of adsorption (ΔG_0 ads) have been determined from the measurements obtained by surface tension and conductivity method. Further with the application of the Gibbs adsorption isotherm, maximum surface excess concentration (θ_max) and minimum surface area/molecule (A_min) at the air–water interface were also estimated. Thermal stability of these long chain cationics has been measured by thermal gravimetric analysis under nitrogen atmosphere. Analysis of thermal stability measurement indicated that the thermal stability of these long chain imidazoliums increase with an increase in chain length.     

Synthesis and Surface Properties of Novel Gemini Imidazolium Surfactants

Five new Gemini imidazolium surfactants were synthesized from imidazole and 1-bromoalkane (C₈, C₁₀, C₁₂, C₁₄, C₁₆) to get 1-alkylimidazole, which was further reacted with 1,3-dichloropropan-2-ol to form the surfactant molecule, 1,1′-(propane-1,3-diyl-2-ol) bis(3-alkyl-1H-imidazol-3-ium) chloride. The structures of the five new surfactants and intermediates were characterized by ¹H-NMR, ¹³C-NMR and IR spectra. Thermal properties of the five new surfactants were studied with thermogravimetric analysis and differential scanning calorimetry, the five new surfactants showed a transition from a crystalline phase to a thermotropic liquid–crystalline phase at around ca. 100 °C, which transformed to an isotropic liquid phase at around ca. 165 °C. The five new surfactants critical micelle concentrations (CMC) in the aqueous solutions were determined by surface tension and electrical conductivity methods. The surface tension measurements provided a series of parameters, including critical micelle concentration (CMC), surface tension at the CMC (γ _CMC), adsorption efficiency  (pC ₂₀), and effectiveness of surface tension reduction (π_CMC). In addition, with application of the Gibbs adsorption isotherm, maximum surface excess concentration (Γ_max) and minimum surface area/molecule (A_min) at the air–water interface were obtained. The parameters β (degree of counterion binding to micelles), ΔG _ads ^θ (Gibbs free energy of adsorption), and ΔG _mic ^θ (Gibbs free energy change of micellization) were also derived. The results indicated that the five new Gemini surfactants exhibited very low CMC and a good efficiency in lowering the surface tension of water. The foamability and foam stability of the five new surfactants were also examined at different CMC.     

Adsorption of some anionic surfactants on barite and at solution/Air interfaces

The adsorption behavior of synthesized anionic surfactants with the chemical structure RO-Ph-N=N-Ph-SO₃Na, where R is an octyl, dodecyl, or cetyl group, was analyzed by using a modified version of the Frumkin adsorption isotherm. The values of thermodynamic parameters (including free energy of micellization, ΔG _mic, and of adsorption, ΔG _ads) at the solution/air interface and the solid/liquid interface were calculated, and the relation between the adsorption of the surfactants at these interfaces was investigated. Studies of the surface properties of these synthetic surfactants showed that the length of the hydrocarbon chain of these surfactants plays a major role in determining their surface and thermodynamic properties and that there is a good relationship between the effectiveness of adsorption of the surfactant and its efficiency as a collector.     

Preparation,surface-active properties,and antimicrobial activities of bis-quaternary ammonium salts from amines and epichlorohydrin

A series of new cationic surfactants, bis-quaternary ammonium salts, were prepared from tert-alkylamine and a product of the reaction of epichlorohydrin with decyl- and dodecylamine, and their surface-active properties were measured. Specifically, the critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), surface excess concentration (Γ), area per molecule at the interface (A), and standard free energies of adsorption (ΔG _ads ^o) and of micellization (ΔG _mic ^o) were determined. All these surfactants showed good water solubility and low CMC, more than one order of magnitude lower than those of corresponding mono-alkylammonium salts. They also showed good foaming properties but worse wetting capabilities. Many of these compounds had antimicrobial activities against gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) and yeast (Candida albicans), but they were not active against molds.     

Synthesis and some studies on fluorinated cationic surfactants: surface and biocidal activities

Three fluorinated cationic surfactants were prepared by condensing N-(2-bromoethyl)perfluoroalkylamides with stoichiometric amounts of pyridine, triethanolamine, and triethylamine to produce three quaternary ammonium salts. The surface and biocidal properties of these surfactants were investigated to find the relation between the structure of the hydrophilic portion of the compounds and their efficiency as biocides. The properties studied included critical micelle concentration (CMC), effectiveness (II_CMC), surface excess concentration (T_max), and area occupied by a molecule (A_min). Free energies of micellization (ΔG _mic ^o) and adsorption (ΔG _ads ^o) of the surfactants in aqueous solution were calculated. The minimal inhibitory concentrations of the prepared compounds were tested against five strains as representative group of microorganisms.     

Effect of aromatic ring in the alkyl chain on surface properties of arylalkyl surfactant solutions

Surface properties of two series of anionic arylalkyl surfactants, containing different aromatic rings in the straight aliphatic chain, sodium N-aryloleyl-N-methyl-2-aminoethanesulfonates and sodium N-aryloleyl p-methoxyanili-nesulfonates, were investigated. An increase of the aromatic ring size in the alkyl chain increases the critical micelle concentration (CMC) and surface tension at CMC. However, this also decreases the efficiency and effectiveness in reducing water surface tension. The dominant factor of the decrease of efficiency and effectiveness is attributed to the function of the hydrophilic segment and hydrophobic segment for arylalkyl surfactants, respectively. The same results are found in the standard free energy of adsorption (ΔG ^o _ads) and the standard free energy of micellization (ΔG ^o _mic) values. Moreover, with the increase of the aromatic ring size, the adsorption and micellization of arylalkyl surfactants begin to weaken. The data indicate that some parts of surface properties for arylalkyl surfactants are affected by the bulkiness of the arylalkyl chain. The results provide opportunities for further detailed examination of surface properties of arylalkyl surfactants with other branched alkyl chains.     

Polymeric surfactants for enhanced oil recovery. IV—Thermodynamic properties of ethoxylated alkylphenol formaldehyde polymeric surfactants

The thermodynamic properties of some low molecular weight ethoxylated alkylphenol formaldehyde polymeric surfactants have been investigated. Surface tension as a function of concentration of the surfactants in aqueous solutions was measured at 28, 38, 48 and 58°C, using the spinning drop technique. From these measurements, the minimum area per molecule at the aqueous solution/air interface (A_min) was determined. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) for these polymeric nonionics were calculated. Micellization is more sensitive to ethylene oxide chain length while adsorption is more dependent on the length of the alkyl chain.     

Synthesis and Properties of Novel Alkyl Sulfonate Gemini Surfactants

A series of novel dialkyl disulfonate gemini surfactants (2C_n-SCT where n is the carbon number of the hydrophobic chain) were synthesized from cyanuric chloride, aliphatic amine and taurine. The chemical structures of the prepared compounds were confirmed by ¹H NMR, ¹³C NMR, IR spectra, and ESI–MS. Their critical micelle concentrations (CMC) in the aqueous solutions at 25 °C were determined by surface tension and electrical conductivity methods. With the increasing length of the carbon chain, the values of their CMC initially decreased, and then increased with an alkyl chain length of 14. The surface tension measurements of 2C_n-SCT (except for n = 14) determined that there is a low CMC, a great efficiency in lowering the surface tension, and a strong adsorption at the air–water interface. In addition, adsorption and micellization behavior of 2C_n-SCT were estimated from pC ₂₀, the minimum average area per surfactant molecule (A _min), and standard free energy micellization and adsorption ( \Updelta G_\textmic^°  \textand \Updelta G_\textads^° \Updelta G_{\text{mic}}^{^\circ } \,{\text{and}}\,\Updelta G_{\text{ads}}^{^\circ } ). These properties are significantly influenced by the chain length n, and the adsorption is promoted more than the micellization.     

Synthesis and Study of the Surface Properties of Alkylnaphthalene and Alkylphenanthrene Sulfonates

Some alkylnaphthalene and alkylphenanthrene sulfonates were synthesized by means of a Wurtz–Fittig reaction. The HLB values for the prepared compounds were calculated, and the basic properties were studied in water at different temperatures, namely, 25, 35 and 45 °C. Through surface tension measurements, the following values were determined: the critical micelle concentration (CMC) and the surface tension at the CMC (γ_CMC). The following values were calculated: area per molecule at the CMC (A_CMC), standard free energy change of micellization (ΔG _mic), standard free energy of adsorption (ΔG _ad), and the efficiency of a surfactant in reducing surface tension (pC20). Furthermore, the partition coefficients of the synthesized compounds were also measured. The results show that n-alkylnaphthalene and n-alkylphenanthrene surfactants studied exhibit desirable properties that may be of value in some fields such as detergency. To confirm the detergency power of the prepared surfactants, some foam studies were performed.     

Synthesis and Physicochemical Investigation of Novel Quaternary Ammonium Salt Cationic Gemini Surfactant Derived from Cyanuric Chloride

Three novel quaternary ammonium salt cationic gemini surfactants (QAS C _n ?C2?CC _n where n represents the hydrocarbon chain lengths of aliphatic amine, i.e., 6, 8, 12) were synthesized from 2,4,6?Ctrichloro?C1,3,5?Ctriazine, ethylenediamine, N,N?Cdimethylpropane?C1, 3?Cdiamine and benzyl chloride. ¹H-NMR, ¹³C-NMR, ESI?CMS spectra and elemental analysis were used to confirm the chemical structures of the prepared compounds. Their critical micelle concentrations (CMC) in the aqueous solutions were determined by surface?Ctension, electrical conductivity and steady?Cstate fluorescence methods respectively. With the increasing length of the hydrophobic chain, the values of their CMC decreased. The values of CMC, ?? _CMC, pC ₂₀, ??_max, and A _min were derived from surface tension measurements, while the thermodynamic parameters of micellization (?G _mic ^° and ?G _ads ^° ) were determined by electrical conductivity. These properties are significantly influenced by the hydrophobic chain length.     

Counterion-coupled gemini (Cocogem) surfactants based on dodecylisopropylol amine and dicarboxylic acids: synthesis,characterization and evaluation as biocide against SRB

New cocogem surfactants were synthesized by interaction of dodecylisopropylol amine with dicarboxylic (oxalic, succinic, adipic, sebacic, tartaric, maleic, fumaric, isophthalic) acids. By tensiometric method, the surface activity of aqueous solutions of the synthesized cocogem surfactants at the border with air was studied and, by conductometric method, the specific electrical conductivity of these solutions was determined. The degree of counterion binding (β), critical micelle concentration (CMC), effectiveness of surface tension reduction (π_CMC), surface excess concentration (Γ_max), area per molecule at the interface (A_min), changes of Gibbs free energies of adsorption (ΔG_ad) and micellization (ΔG_mic) have been calculated. The character of change of the colloidal-chemical indices depending on spacer-group nature and length has been clarified. So, with an elongation of the spacer group and when passing from cis-form to trans-form, the value of CMC decreases. The obtained cocogem surfactants exhibit a considerable bactericidal effectiveness against sulfate-reducing bacteria. The bactericide properties of the cocogem surfactants containing in the spacer chain a saturated hydrocarbon fragment and benzene ring are stronger than for the others.     

Synthesis and Surface Properties of a Novel Sodium 3‐(3‐Alkyloxy‐3‐oxopropoxy)‐3‐oxopropane‐1‐sulfonate at the Air–Water Interface

The present paper describes the synthesis and evaluation of surface properties of a novel series of anionic surfactant, namely sodium 3‐(3‐alkyloxy‐3‐oxopropoxy)‐3‐oxopropane‐1‐sulfonate with varying alkyl chain length (C8–C16). Synthesis involves initial formation of the 3‐alkyloxy‐3‐oxopropyl acrylate along with fatty acrylate during the direct esterification of fatty alcohol with acrylic acid in the presence of 0.5 % NaHSO₄ at 110 °C followed by sulfonation of the terminal double bond of the 3‐alkyloxy‐3‐oxopropyl acrylate. Synthesized compounds were evaluated for surface and thermodynamic properties such as critical micelle concentration (CMC), surface tension at CMC (γ_cmc), efficiency of surface adsorption (pC₂₀), surface excess (Γ_max), minimum area per molecule at the air–water interface (A_min), free energy of adsorption (?G°_ads), free energy of micellization (?G°_mic), wetting time, emulsifying properties, foaming power and calcium tolerance. Effect of chain length on CMC follows the classic trend, i.e. decrease in CMC with the increase in alkyl chain length. High pC₂₀ (>3) value indicates higher hydrophobic character of the surfactant. These surfactants showed very poor wetting time and calcium tolerance, but exhibited good emulsion stability and excellent foamability. Foaming power and foam stability of C14‐sulfonate were found to be the best among the studied compounds. Foam stability of C14‐sulfonate was also studied at different concentrations over time and excellent foam stability was obtained at a concentration of 0.075 %. Thus this novel class of surfactant may find applications as foam boosters in combination with other suitable surfactants.     

Synthesis and Some Properties of Fluorinated Cationic Surfactants

Three fluorinated cationic surfactants were prepared by condensing N-methyl diethanol amine pentafluoro benzoate with stoichiometric amounts of octyl, dodecyl or hexadecyl bromide. The surface properties and parameters were investigated to find the relationship between the structures of the hydrophobic portion of such compounds. The properties studied include surface tension, critical micelle concentration (CMC), effectiveness (Π_cmc), maximum surface excess (Γ_max) and minimum surface area (A_min) were investigated with respect to different concentrations at 25 °C. Standard free energies of micellization and adsorption of the prepared surfactants in the aqueous solution were studied. The values of Γ_max, standard free energies of micellization \Updelta \textG_\textmic^\texto \Updelta {\text{G}}_{\text{mic}}^{\text{o}} and adsorption \Updelta \textG_\textads^\texto \Updelta {\text{G}}_{\text{ads}}^{\text{o}} were found to increase with the chain length, while the cmc and minimum surface area occupied by one molecule A_min were found to decrease. The biocidal activity was determined through the inhibition zone diameter of prepared compounds which were measured against five strains of a representative group of microorganisms.     

Micellar and Surface Properties of Some Monomeric Surfactants and a Gemini Cationic Surfactant

The physicochemical and interfacial properties of the monomeric surfactants cetyltrimethyl ammonium bromide (CTAB), cetyltriphenyl phosphonium bromide (CTPB), tetradecyl triphenyl phosphonium bromide (TTPB), cetyldiethylethanol ammonium bromide (CDEEAB), cetyltrimethyl ammonium chloride (CTACl), tetradecyltrimethyl ammonium bromide (TTAB), and a gemini surfactant (C₁₆-3-C_16, 2Br⁻) at different pH (3.1, 7.0, and 7.75) have been investigated by conductivity and surface tension measurements at 300 K. The critical micellar concentration (CMC), degree of micellar ionization (α), surface excess concentration (Г_max), minimum surface area per molecule of surfactant (A _min), Gibbs free energy of micellization (∆G _m⁰), surface pressure at the CMC (π _CMC), and the Gibbs energy of adsorption (∆G _ads⁰) of the monomeric surfactants have also been determined. The CMC, α and Г_max, increase with increasing pH whereas A _min decreases.     

Synthesis,Characterization, Surface,and Thermodynamic Studies of Alkyl Tetrachloroferrates: Performance Evaluation of Their Nanostructures as Biocides

Decyl and dodecylamino tetrachloroferrates were synthesized and characterized using Fourier-transform infrared spectroscopy (FTIR), elemental analysis, X-ray diffraction (XRD), nuclear magnetic resonance (¹H-NMR), and atomic absorption spectroscopy (AAS). The surface properties of the cationic surfactants including critical micelle concentration, effectiveness, minimum surface area, and maximum surface excess were determined using surface tension measurements. The effectiveness of surface tension reduction (π_cmc) was found to increase as the hydrophobic chain length increases with values of 30 and 34 mN m⁻¹ for C₁₀ and C₁₂, respectively. Moreover, the effect of temperature on micellization was determined over the range of 35–55 °C. Thermodynamic parameters (ΔG°, ΔS°, and ΔH°) were calculated and the results indicate a spontaneous process for both micellization and adsorption. The nanoparticles (NC₁₀ and NC₁₂) of the prepared surfactants were obtained using the ball mill technique. The particle size and morphology of the nanoparticles were determined using transmission electron microscope measurements. The antibacterial study of the nanoparticle surfactants revealed their strong efficiency against fungi and different pathogenic bacteria compared with the original surfactants.     

Effect of Polar Organic Solvents on Self‐Aggregation of Some Cationic Monomeric and Dimeric Surfactants

Surface and micellization behavior of some cationic monomeric surfactants, viz., cetyldiethylethanolammonium bromide (CDEEAB), cetyldimethylethanolammonium bromide (CDMEAB), tetradecyldiethylethanolammonium bromide (TDEEAB) and dimeric surfactants, i.e., alkanediyl‐α, ω‐bis(dimethylhexadecylammonium bromide) (C₁₆‐s‐C₁₆, 2Br^? where s = 4, 12), butanediyl‐1,4‐bis(dimethyldodecylammonium bromide (C₁₂‐4‐C₁₂, 2Br^?) and 2‐butanol‐1,4‐bis(dimethyldodecylammonium bromide) (C₁₂‐4(OH)‐C₁₂, 2Br^?), was studied in water‐organic solvents [10 and 20 % v/v ethylene glycol (EG) and diethylene glycol (DEG)] by conductivity, surface tension and steady‐state fluorescence methods at 300 K. The main focus of the present work is on the study of the effect of organic solvents on the critical micelle concentration (CMC), Gibbs free energy of micellization (ΔG°_m), Gibbs free energy of transfer (ΔG°_trans), Gibbs adsorption energy (ΔG°_ads) and some interfacial parameters such as the surface excess concentration (Γ_max), minimum area per surfactant molecule (A_min) and surface pressure (π_CMC). The aggregation number (N_agg) and Stern‐Volmer quenching constant (K_SV) were also determined by the steady‐state fluorescence method. It was observed that N_agg decreased with increasing volume percent of organic solvent. The results exhibited an increase in CMC in water‐organic solvents as compared to the respective surfactants in pure water. The negative values of ΔG°_m and ΔG°_ads indicate a spontaneous micellization process. The thermodynamics of micellization revealed that the micellization‐reducing efficiency of glycols increases with the concentration and the number of ethereal oxygens in the glycol.     

Effect of end-group modification,hydrophilic/hydrophobic block ratio and temperature on the surface,associative and thermodynamic behaviour of poly(ethylene oxide)-b-poly(butylene oxide) diblock copolymers in aqueous media

This study describes the surface, micellar, associative and thermodynamic properties of four diblock oxyethylene (E)/oxybutylene (B) copolymers with different hydrophilic block ends and various hydrophilic/hydrophobic ratios in aqueous media. The copolymers were denoted DE₄₀B₁₈, TE₄₀B₁₈, E₅₆B₁₉ and E₅₆B₇. The aqueous polymer solutions at various concentrations and temperatures were investigated by surface tensiometry and dynamic and static laser light scattering. Surface tension measurements were employed to detect the critical micelle concentration (CMC) as well as to calculate the surface-active and thermodynamic parameters of adsorption at the air/water interface. CMC values were also used to calculate the enthalpy of micellization (?H ⁰ _mic), free energy of micellization (?G ⁰ _mic) and entropy of micellization (?S ⁰ _mic). Similarly, various thermodynamic parameters for adsorption at the air/water interface were also deduced. Dynamic light scattering (DLS) was used to obtain the hydrodynamic radii (r _h) and volumes (υ _h) of the micelle at different temperatures, and hence the hydrodynamic expansion parameter (δ _h) was also estimated. Likewise, static light-scattering measurements enabled us to determine various parameters of the copolymer micelles, such as the weight-average molar mass (M _w), association number (N _w), thermodynamic radius (r _t), thermodynamic volume (υ _t), anhydrous volume (υ _a) and the thermodynamic expansion parameter (δ_t). Various thermodynamic and micellar parameters obtained from light scattering show that the micelles formed are spherical in shape and have rather soft interaction potentials at low temperature but become harder at higher temperature. Based on the different experimental results obtained, it can be said that various surface, micellar and thermodynamic parameters are dependent not only on the temperature and solution conditions but also on the hydrophobic/hydrophilic ratio and the end-group composition of the polymer. Modification of the hydrophilic end group of the polymer prominently affects various micellar properties. This effect can be assigned to the difference in polarity and the intermicellar charge effect.     

Surface Activities, Foam Properties, HLB, and Krafft Point of Some n-Alkanesulfonates (C14–C18) with Different Isomeric Distributions

A homologue series of sodium secondary n-alkanesulfonates (C₁₄, C₁₆ and C₁₈) were obtained by photosulfochlorination process with two different reaction conditions. Different length chains with different isomeric distributions of n-alkanesulfonates are expected to present variations in physicochemical properties. In this investigation, the relationships between their isomeric distribution and their chain length and micellar behaviors were thoroughly explored. Their CMC at different temperatures were determined using specific conductivity and surface tension measurements. Through surface tension isotherms, the surface activities (??_CMC) were obtained. The surface absorption amounts (??_max) and the molecular areas (A _min) were calculated using Gibb??s equation. As expected, these surfactants exhibit good surface properties. It was shown that the CMC values increase with increasing the percentage of secondary isomers, with a surface tension decrease. It was also shown that the CMC values decrease with increasing chain length. The HLB values were calculated for each surfactant and the results obtained suggest that they are O/W emulsifiers. The foam properties of synthesized surfactants were evaluated and compared to those obtained for commercial samples. It was shown that the foamability is influenced both by the length of the hydrophobic moiety and the percentage of secondary isomers. It can be easily concluded that the C₁₄ sulfonates show the best foaming properties independently of their isomeric distribution. The Krafft point values obtained indicate that the micellization and the surfactant solubility mainly depend on the proportion of secondary isomers and the length of hydrophobic moiety.