冷轧薄宽带钢局部型中浪瓢曲变形行为研究

针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。     

9.3大阅兵:高标准让军魂荡气回肠

<正>阅兵是展示辉煌的时刻,而为这一辉煌采取的所有的标准,不啻也是宝贵的财富,应当成为践行标准的榜样……这个月最令人难忘、最引人自豪、最提振国威的事情,当属"9.3"大阅兵,它有着以往没有的多重的亮点:首次以纪念抗日战争暨世界反法西斯战争胜利为阅兵主题,彰显维护和平是全世界人民共同的愿望。首次邀请外国军队代表参加分列式,体现纪念大会的国际性。首次组织抗战老兵包括国民党老兵参加,体现了对历史的尊重,体现全民族抗战的特色。首次编组英模部队方队受阅,展示中国共产党在抗战中定海     

云冈遗韵

<正>云冈石窟,历经1540年的人间风雨而硕立至今的那种坚强、博爱与宽容的佛国神界!这净25米高的崖壁上蜂窝般开凿出的是人间的奇迹,人类的智慧,     

分光光度计使用维护的注意事项

一、分光光度计检定的主要项目对分析结果的影响 1.波长准确度 分光光度法必须对应于样品吸收光谱中的某一个吸收峰的波长.但由于仪器本身存在的误差和不同的人员进行测量时产生的误差,单色光的实际波长与仪器的波长读数值之间会存在一定的误差.     

乡野如画醉金秋

秋天在不经意间早已悄然远去,留下的是那金色的记忆。乡野的秋色金灿灿。柿子树上硕果累累,红红火火的柿子和层次分明、错落有致的黑色枝干在弥漫的烟雾中若隐若现、飘逸洒脱,宛如一幅写意的国画。     

国内外仪器指标的接轨与合格判断

随着科学技术的发展和科研任务的需要,测量仪表的使用大幅度增加,因此检定的任务量也随之大幅攀升.其中国外仪表占了很大的比重,但在仪器技术指标的表达方式上国外各个厂家不尽相同,与国内计量术语和仪器技术指标的表达方式更是存在较大的差异,这对于仪器的使用和计量检定的合格性判断是一个重要的问题,关系到购置仪器的验收与使用,进而关系到科研任务的质量保障.     

甲醛气体传感器研究进展

甲醛是室内空气的主要污染物之一,随着人们对室内空气污染的日益关注,对甲醛的准确及时检测显得更加重要.目前检测甲醛气体最为快速的方法就是传感器法.在综合分析了国内外甲醛气体传感器的研究现状的基础上,着重就测定甲醛的电化学传感器、基于化学发光的传感器、金属氧化物传感器、电子鼻、声表面波传感器的特性进行了阐述与剖析,指出了甲醛气体传感器存在的问题,并预测了其发展趋势.     

垂直距离聚类的Lagrange乘子定界问题

求解1 维空间的一点到二次曲面的距离是基于聚类的模式识别的一个难题.后者在航天器激光威胁告警中具有重要的应用.本文证明在A的特征根相同的情况下如此的代数方程仅有一个根,并给出求解此根的迭代算法.在A的特征根同号的情形下给出Lagrange乘子的上下界,对于采用二分法求解Lagrange乘子提供了可能和便利.该问题的解决为激光探测和激光告警提供了一种新的途径.     

世界著名自驾车露营地

<正>露营在国外已经拥有超过100年的历史,露营地的管理和经营方式大多参照了酒店,也有星级之分。随着人们需求的变化,露营地提供的设施和服务也在不断跟进。如今,在一些著名的露营地,已经不仅仅能够看到为自驾车、房车露营者提供的营位和日常生活的基础设施,还有诸如高尔夫、骑行、划船等形式多样的体育运动,以及像毗邻历史悠久的古村落这样的特色看点。在很多国家,建立一个享有声誉的汽车营地甚至成为了拉动旅游业发展的重要手段之一,也因此得到了政府的大力支持。     

汽车阳极电泳线改造为阴极电泳线的实践

为了将车身涂装线中的阳极电泳改造成阴极电泳,在保留前处理不变的前提下,首先布置合理的工艺流程、确定阴极电泳工作原理,然后对阴极电泳的电泳槽、漆液主循环系统、超滤系统、阳极液循环系统、热交换循环系统、阴极电泳电源和电泳后清洗系统的技术参数进行认真的分析和计算,使改造后的阴极电泳的各项技术指标达到了设计的要求.结果表明,通过局部的技术改造,将车身涂装线的阳极电泳改造成阴极电泳完全可行.     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

Refrigerators Enter a New Era of Health Preservation Frestech initiates the establishment of China's first standard for household sterilization refrigerators

On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.……     

Optimum-Simulation von Ernteprozessen

Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.     

A study of centrifugal cast high boron high speed steel

In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M₂(B,C), (W,Mo)₂(B,C), M₃(B,C), M₂₃(B,C)₆ type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm². The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K₁ mill housing of bar mill.     

Thixotropy of Systems with Shear Thinning and Plastic Flow Behavior

The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ...     

Effect of Oxide Assisted Metal Nanoparticles on Microstructure and Morphology of Gallium oxide Nanowires

Several researches have been reported about the characteristic of β-Ga2O3 nanowires which was synthesized on nickel oxide particle. But indeed, recent researches about synthesis of β-Ga2O3 nanowires on oxide-assisted transition metal are limited to nickel or cobalt oxide catalyst. In this work, Gallium oxide (β-Ga2O3 ) nanowires were synthesized by a simple thermal evaporation method from gallium powder in the range of 700 - 1000℃ using the iron, nickel, copper, cobalt and zinc oxide as a catalyst, respectively. The β-Ga2O3 nanowires with single crystalline without defects were successfully synthesized at the reaction temperature of 850, 900 and 950℃ in all the catalysts. But optimum experimental condition in synthesis of nanowires varied with the kind of catalyst. As increasing synthesis temperature,the morphology of gallium oxide nanowires changed from nanowires to nanorods, and its diameter increased. From these results, we could be proposed that the growth mechanism of β-Ga2O3 nanowires was changed with synthesis temperature of nanowires. Microstructure and morphology of Synthesized nanowire was characterized by HR-TEM, FE-SEM, EDX and XRD.     

Brainstorming for ISO Strategy 2016-2020

正Responding to ISO’s appeal for survey for the to-be-developed ISO Strategy Plan for 2016-2020,SAC hosted a special workshop over the needs and comments of various fi elds on June 8 in Beijing.The workshop was attended by ISO President-elect and Ansteel General Manager Zhang Xiaogang,SAC Vice-Administrator Yu Xinli,and 30 experts from