葫芦岛建材（卫浴）卖场分布图

1富都家具广场部分品牌介绍：卡丽卫浴、特地陶瓷、安华卫浴、toto卫济、姜加华卫浴、摩恩卫浴、东鹏陶瓷、欧派卫浴、奥斯曼卫浴、欧美陶瓷、罗马卫浴、维可陶卫浴、骏程陶瓷、大将军陶瓷、维可陶卫浴、威廉顿陶瓷、宾利陶瓷、银晶卫浴、露意莎、金舵陶瓷、法标卫浴、蒙娜丽莎卫浴、帝王洁具、好太太卫浴、狮王陶瓷、澳鑫卫浴、家瑞卫浴、依派隆卫浴、盛邦陶瓷、南希卫浴。     

葫芦岛市建材（卫浴）卖场分布图

1富都家具广场 卡丽卫浴、特地陶瓷、安华卫浴、toto卫浴、美加华卫浴、摩恩卫浴、东鹏陶瓷、欧派卫浴、奥斯曼卫浴、欧美陶瓷、罗马卫浴、维可陶卫浴、骏程陶瓷、大将军陶瓷、维可陶卫浴、威廉顿陶瓷、宾利陶瓷、银晶卫浴、、露意莎、金舵陶瓷、法标卫浴、     

1995—1996年国外塑料工业进展

收集了１９９５年７月到１９９６年６月国外塑料工业相关的期刊资料，介绍１９９５～１９９６年国外塑料工业进展。提供了美国、日本、德国、韩国、法国、荷兰、比利时、意大利等生产国及亚洲、西欧（包括全部欧洲联盟国家和奥地利、芬兰、挪威、瑞士和瑞典）、东欧、北美、中南美、非洲和大洋洲等地域的塑料材料产量，作为对比提供了中国台湾和外刊报导的中国塑料产量。按通用热塑性树脂（包括高密度聚乙烯、低密度聚乙烯、线型低密度聚乙烯、聚丙烯、聚苯乙烯、ＡＢＳ和聚氯乙烯）、工程塑料（包括尼龙、聚碳酸酯、热塑性聚酯、聚甲醛和改性ＰＰＯ／ＰＰＥ）、通用热固性树脂（包括酚醛、聚氨酯、不饱和聚酯和环氧树脂）、特种工程塑料（包括聚苯硫醚、液晶聚合物、聚醚砜、聚醚醚酮、和聚芳酯）、有机硅树脂、有机氟树脂、丙烯酸树脂和降解塑料的顺序，对塑料材料产量、消费量和合成工艺、产品应用开发、树脂品种延伸等技术进展作了详尽介绍。     

北京市建材（卫浴）卖场分布图

北京建材经贸大厦卫浴品牌 TOTO卫浴洁具、OXO卫浴、凯乐玛洁具、极可意浴缸、当代龙头、意大利的Glass Design、VOLA卫浴、AGAPE卫浴、丰华卫浴、得而达、卡西奥、Esprit homes浴、威达（Vitra）卫浴、索格龙头（Supergrif）、汉斯格雅、高仪洁具、优浦JOOP!卫浴、雅卓、琥珀（Herbeau）、唯宝卫浴、科勒洁具、乐家卫浴     

4月份27城市乘用车轮胎热销型号市场价格

按品牌中文首字母排序;27城市为：北京、上海、广州、深圳、杭州、成都、沈阳、西安、武汉、青岛、哈尔滨、合肥、呼和浩特、兰州、连云港、洛阳、南昌、南宁、攀枝花、秦皇岛、曲靖、厦门、太原、泰安、重庆、乌海、乌鲁木齐     

节能减排，催化剂大有可为

据报道,全球18种重要的化学品[乙烯、丙烯、聚乙烯、聚丙烯、甲醇、乙二醇、环氧乙烷、氨、苯酚、对苯二甲酸、对二甲苯、氯乙烯、丙烯晴、己内酰胺、苯乙烯、环氧丙烷、BTX（苯、甲苯、二甲苯）和异丙苯]生产所需能源占化工行业能源需求的80％。     

浅谈化学品仓库火灾的扑救

化学品仓库集中存放着许多化工产品,这些产品性质复杂,多数有易爆、易燃、有毒、有腐蚀性的特点,扑救这类化学品的火灾是一项比较复杂的工作。如不能用水（包括水蒸气和含水的泡沫剂）扑救的化学品就有金属钠、钾、钙、镁、钍、铝粉、铝镁合金、氰化钠、硼氢化物、电石、磷化钙、发烟硫酸、氯磺酸、三氯化磷、五氯化二磷、无水氯化铝、过氧化钠、氯化硫酰、四氯化硅、五氨化锑、氯乙酰、苯基氯硅烷等忌水物质。     

胶粘剂新专利

胶粘剂和密封剂体系US 8404774 B2 2013-03-26本发明涉及的胶粘剂和密封剂体系的基础聚合物如下:不饱和聚酯树脂、环氧树脂、聚氨酯、硅烷封端聚合物、乙烯酯树脂、丙烯酸酯、聚醋酸乙烯酯、聚乙烯醇、聚乙烯醚、聚乙烯酯、乙烯酸乙烯酯、乙烯-丙烯酸共聚物、聚苯乙烯、聚氯乙烯、丁苯橡胶、氯苯橡胶、氰基橡胶、丁基橡胶、聚硫、聚     

传统手工艺的当代价值

自然界,为人类提供了生存、生活,以及进行创造的物质基础。人们在自然界的劳动实践中,获取了竹、木、柳、藤、草、棉、革、漆、土、玉、石、陶、瓷、金、银、铜、铁、锡等成为生活用品的材料。随着造物活动的扩大,人们也创造了与这些材质相适应的雕、镂、刻、削、染、缝、绘、髹、铸、琢、磨等工艺。     

杭州钱江干燥设备有限公司GPQ微型多功能干燥实验机

杭州钱江干燥设备有限公司是中国通用机械干燥设备行业协会副理事长单位和首批重点骨干企业、浙江省优秀科技型企业。是一家从事热力干燥技术开发、设备制造、销售、安装和技术咨询服务于一体的高新技术企业。公司成立二十多年来。已为化工、石化、精细化工、轻工、制药、食品、农副产品、矿产品、陶瓷、冶金、建材、木材、造纸、磁性材料等行业提供了近千套干燥设备。     

用于树脂压铸（RTM）的树脂基体研究

文中介绍了ＲＴＭ用树脂体系的研究概况，结果表明树脂体系具有低的粘度，较长的贮存期和良好的反应性能，固化树脂和复合材料的力学性能及耐热性能优良，它能满足ＲＴＭ对基体的要求。     

聚乙烯管材发展近况

综述了聚乙烯管材的发展近况，介绍了国内外市场上聚乙烯管材的消费情况和主要应用领域，特别预测了国内市场的前景。     

Graphitization of phenolic resins for carbon-based refractories

The chemical resistance and thermo-mechanical properties of refractories bonded with resole or novolak resins depend on the presence of crystalline carbon phases (preferentially with features close to graphite ones) in their compositions. Although thermosetting resins are commonly classified as non-graphitizing carbon sources, many efforts have been made in recent years in order to find effective routes to induce the in situ graphitization of such components in refractory products during service. This work evaluates the role of processing parameters (mixing, curing and firing temperature) and additives (ferrocene, boric acid and exfoliated graphite) in the graphitization process of two commercial resins (resole and novolak) and a synthesized one (modified-novolak). X-ray diffraction, Raman spectroscopy and thermogravimetric analyses were carried out to identify the microstructural evolution of the compositions. According to the results, carbon graphitization was already detected after firing the samples at 1000 °C for 5 h under reducing atmosphere. Ferrocene addition favored a more effective graphitization of the selected resins, but H₃BO₃ also induced the rearrangement of the carbon derived from the commercial novolak product. The mixing and curing procedures used when preparing the compositions proved to be very important steps as they affected, to a greater extent, the resulting graphitization degree of the fired samples.     

快速高吸油性丙烯酸酯树脂的合成研究

以丙烯酸丁酯与甲基丙烯酸甲酯为共聚单体，在聚合体系中引入致孔剂和大分子增容剂，采用悬浮聚合法合成了快速高吸油性树脂，考察了致孔剂用量、增容剂用量、乙酸乙酯／异戊醇混合致孔剂质量比等对高吸油性树脂吸油性能的影响。结果表明：通过引入致孔剂乙酸乙酯，不仅使树脂对甲苯和汽油的吸油率分别达到了3300％和1000％，而且吸油速度加快，2h内可达到饱和吸油；在致孔的基础上引入增容剂，可使树脂对汽油的吸收率显著提高，达到了1500％。     

NMR法测定环氧树脂聚合度和官能度的研究

根据环氧树脂1H-NMR谱中环氧基、苯基、亚次氧甲基、甲基的质子数与相应峰面积的比例关系,可同时求得环氧树脂的聚合度n和官能度Fn.将甲基法和苯基法测定的聚合度n和官能度Fn与文献法和商品标示值做比较,由甲基峰面积与苯基峰面积的比值关系得出苯基法比甲基法更合理.甲基法或苯基法测定数均分子量Mn和环氧当量EEW依赖于聚合...     

离子交换树脂的复苏

对由于离子交换树脂污染造成除盐系统运行状况恶化进行了分析、论证,并提出离子交换树脂污染机理、污染程度的判断、复苏后达到标准、树脂复苏剂的选择及实际应用效果,进而阐明树脂污染复苏处理是解决树脂污染问题的有效途径,经复苏和调试,树脂基本恢复了工交,酸、碱耗降到正常值,出水水质完全合格。     

Two-step synthesis and characterization of urea–isobutyraldehyde–formaldehyde resins

Urea–isobutyraldehyde–formaldehyde (UIF) resins were synthesized from urea, isobutyraldehyde and formaldehyde using sulfuric acid as catalyst by two-step method. The effect of molar ratio of isobutyraldehyde to formaldehyde (n(I)/n(F)), molar ratio of aldehyde to urea (n(A)/n(U)), catalyst concentration and reaction time on the yield, hydroxyl value and softening point of UIF resins were investigated. The UIF resins were characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H-nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC) and thermogravimetric (TG). The results showed that the yield, hydroxyl value and softening point of the UIF resin were 76.5%, 90 °C and 32 mgKOH/g, respectively, when the molar ratio of urea to isobutyraldehyde to formaldehyde (n(U)/n(I)/n(F)) was 1.0/3.6/2.4, catalyst concentration was 6.0%, and reaction time in the second step reaction was 3.0 h. FT-IR and ¹H NMR results showed that α-H in isobutyraldehyde participated in the synthesis reaction of UIF resins, and the reaction was Mannich reaction. The amount of aldehyde groups in UIF resins increased with the increase of the amount of isobutyraldehyde. GPC results showed that the UIF resins had narrow molecular weight distribution and TG results indicated that the UIF resin had excellent heat resistance.     

PET／DEG／TA和PET／DEG／MA不饱和聚酯树脂固化研究

本文讨论了分别用顺酐和反酸与聚酯合成不饱和聚酯树脂的反应机理,并分析了二种树脂体系固化放热曲线出现差异的原因在于固化交联时不饱和双键的活性不同。     

Synthesis and structural characterization of urea–isobutyraldehyde–formaldehyde resins

Urea–isobutyraldehyde–formaldehyde (UIF) resins were synthesized using urea, isobutyraldehyde, and formaldehyde; sulfuric acid was used as a catalyst. The effects of molar ratio of urea/isobutyraldehyde/formaldehyde (U/I/F) on the properties of resins were investigated, and the structures of the resins were characterized by FTIR, ¹H-NMR, and ¹³C-NMR. When U/I/F was 1.0/3.6/2.4, the yield of the resin was 76.5%. The softening point and hydroxyl value were 90°C and 32 mg KOH/g, respectively. The FTIR, ¹H-NMR, and ¹³C-NMR results showed that an α-ureidoalkylation reaction occurred between urea and isobutyraldehyde to form a lactam. The UIF resins also contained hydroxyl groups and aldehyde groups; the content of aldehyde groups in the resin increased as the amount of isobutyraldehyde increased.     

Deionization of Coagulated,Clarified, Turbid Gauri Shankar Lake Waters by Using Ion-Exchange Technology

Abstract

Water collected from a rain fed Gauri Shankar Lake, Bhavnagar, Gujarat, India was used for this study. It was clarified by giving treatment with alum and poly aluminum chloride (PAC) to remove suspended impurities present in it. Waters having turbidity value of 100–750 NTU (Nephelometric Turbidity Units) were treated with PAC and alum. The dosage of PAC required for the treatment was 60% less as compared with alum. The clarified water was passed through columns loaded with strong acid and strong base ion-exchange resins to obtain deionized water. The experiments were carried out for 100 cycles of exhaustion and regeneration. The effect of the coagulation process conditions on ion-exchange capacity, and the physical attrition of the ion-exchange resins were studied intensively. Also, the performance of ion-exchange resins was compared with virgin ground waters from the institute's well. The resins employed in the study were subjected to EDX (Energy Dispersive X-Ray Spectroscopy) analysis to find out the presence of coagulating ions adsorbed on the resins. The resins were also subjected to SEM (Scanning Electron Microscope) analysis to find changes on their surface due to adhering materials if any.