共查询到16条相似文献,搜索用时 62 毫秒
1.
2.
针对大规模的离散傅里叶变换(DFT)调制滤波器组设计算法复杂度高的问题,该文提出一种基于无约束优化的快速设计算法。该算法将两个原型滤波器的设计问题归结为一个无约束优化问题,将滤波器组的传递失真,混叠失真以及原型滤波器阻带能量的加权和作为目标函数。进而,采用双迭代机制来求解该优化问题。在单步迭代中,运用矩阵求逆的等效条件和Toeplitz矩阵求逆的快速算法,显著地降低了迭代的计算代价。仿真对比表明,与已有的设计算法相比,新算法计算代价低 ,可以得到整体性能更好的滤波器组,并且可以快速设计大规模的滤波器组。 相似文献
3.
本文构建了一类冗余比为2的二维线性相位的双原型离散傅立叶变换(DFT)调制滤波器组。利用原型滤波器的多相位分解,推导出了该滤波器组的完全重构(PR)条件。基于该PR条件,我们将滤波器组的设计归结为一个关于原型滤波器的多相位分量的无约束优化问题。由于原型滤波器是线性相位的,多相位分量之间具有一定的关系,因此我们可以简化该优化问题。仿真结果验证了滤波器组PR条件的正确性。同时,仿真表明了优化算法的有效性,设计所得的滤波器组重构误差很小、频率特性较好,基本满足实际应用的需要。 相似文献
4.
5.
6.
采用DFT滤波器组来代替OFDM系统中的IDFT/DFT模块,形成基于滤波器组的收发器。设计适于多经衰落信道的DFT滤波器组收发器。其均衡与OFDM系统一样,是在接收端采用单抽头的均衡器。实验采用随机多径信道,仿真结果表明所提出的滤波器组收发器可以获得较好的频谱特性,以及较满意的SIR(信号与干扰比值)。 相似文献
7.
由于具有灵活的频率划分能力,非均匀滤波器组在语音、图像等信号的处理中有着广泛的应用。该文针对非均匀DFT调制滤波器组无法直接合并构造的缺点,提出一种基于相位调制的构造方法。在该方法中,非均匀DFT调制滤波器组的子带滤波器由均匀DFT调制滤波器组经子带合并和相位调制获得。构造所得的非均匀滤波器组与原均匀滤波器组的重构特性近似相等。同时推导出非均匀子带滤波器具备良好频率特性的条件。理论分析和仿真结果均表明了所提的构造方法的有效性。 相似文献
8.
基于DFT滤波器组的宽带信号谱分析方法 总被引:3,自引:0,他引:3
本文利用DFT滤波器组、ZFFT,提出了一种宽带信号的实时谱分析方法。有效地解决了宽带信号高分辨率 谱分析要求的大运算量与实时性之间的矛盾。理论分析与计算机仿真表明该算法切实可行、有效并且易于实现。 相似文献
9.
10.
提出了一种几乎完全重构的过采样DFT调制滤波器组的设计方法.分析和综合滤波器组采用了不同的原型滤波器,使得设计自由度大为增加.考虑滤波器组的子带混叠、输出混叠、系统失真要求,推导并给出了相应的设计算法.实验结果证明提出的方法在相同滤波器长度情况下可以得到更好的阻带衰减. 相似文献
11.
In this paper, the structure of the 2D oversampled DFT modulated filter banks is analyzed and a spatial-domain condition of a filter bank without transfer function distortion is derived. Based upon the spatial-domain condition, a modified Newton's method is presented for fast design of 2D oversampled linear phase (LP) DFT modulated filter banks with nearly perfect reconstruction (NPR). We formulate the design problem into an unconstrained optimization with a fourth-order objective function, which is the weighted sum of the transfer function distortion of the filter bank and the stopband energy of the prototype filter (PF). The optimization is solved by the modified Newton's method, where each of iterations updates the PF by a set of linear equations. It is proved that the iteration process fast converges to a stationary point of the objective function. Compared with the existing methods, the new method is fast in computation and can design 2D filter banks with a large number of subbands. 相似文献
12.
A time domain designing method is proposed for discrete Fourier transform (DFT) modulated filter banks (DFT-FBs) for application in multi-carrier transceiver systems. Instead of using the time-reversed pair limitation between the transmitting /receiving filter pair, the receiving filters in the proposed filter banks are derived from transmitting filters in accordance with the Moore-Penrose generalized inverse matrix. It can be freely obtained to design the transmitting prototype filter, which mainly affects the level of spectral containment. Furthermore, the symbol error rate (SER) performance of the proposed filter bank based trans-multiplexer with one tap equalizer is investigated in ideal channel and multi-path channel environments respectively. Simulation shows that the proposed approach can achieve significant SER reductions when square root raised cosine (RRC) prototype filter is used for comparing with the orthogonal frequency division multiplexing (OFDM) and the general DFT-FBs based applications. 相似文献
13.
A novel and efficient technique to design modulated discrete Fourier transform (DFT) filter banks is introduced in this paper. The proposed method first relaxes the limits that the synthesis filters are the time-reversed version of the analysis filters and then adopts the time domain formula of the perfect reconstruction property as the solution to design the synthesis filters. The prototype filter in analysis filter banks is designed based on Fourier-Kaiser window approach. Simulation results show that the designed filter banks approximately satisfy the perfect reconstruction with controllable reconstruction errors. 相似文献
14.
In this paper, new procedures for performing multicarrier modulation (MCM) are presented, based on using IFFT/FFT embedded in a filter bank-based transmultiplexer system. The IFFT/FFT blocks, along with the use of cyclic prefix or zero-padding strategies, enable easy equalization of the transmission channel. Additionally, the transmultiplexer system provides improved spectral discrimination, which can increases the transceiver robustness against mainly narrow-band interferences. Moreover, one of the proposed procedures presents an IDFT as the final stage of the MCM transmitter, and a DFT as the first stage of the receiver. This front-end is similar to standardized systems, enabling its compatibility. As it is illustrated by means of several examples, given a signal to noise ratio and comparing the new procedures to DFT-based MCM adopted in several digital communications standards, the following attractive features can be found: (a) greater spectral separation in the information transmitted over each subcarrier and (b) the robustness of the systems in noisy environments, mainly when narrow-band interferences appear, can be increased, allowing a reduction in the bit error probability. 相似文献
15.
16.
针对经典的准确重构混合滤波器组设计问题,提出一种调制型混合滤波器组(MHFB)的设计算法,推导了分析滤波器组系数矩阵的行列式与原型滤波器系数的解析关系,给出了具有普适性的综合滤波器组解的一般形式,并讨论了因果、稳定系统的设计方法。针对多通道HFB设计复杂的问题,提出一种FIR形式综合滤波器组的优化设计算法,适用于多通道HFB的设计。仿真结果验证了算法的有效性。 相似文献