Weekly greenhouse gas emissions of municipalities: Methods and comparisons

Local authorities need timely information on their greenhouse gas (GHG) emissions and their causes, comparison with other municipalities and tools for dissemination of information to the citizens. This paper presents a weekly GHG emission calculation system, CO₂-report, which provides such data for citizens and local decision-makers in a timely manner, in contrast to the official emissions statistics, which are available on an annual basis 1–2 years afterwards. In this paper, we present the methodology and three main outputs of CO₂-report: (1) weekly GHG emissions; (2) advance annual emissions; and (3) final annual emissions for 2009 with comparison of 64 municipalities in Finland. We explain the reasons for the large variability of annual emissions, from 5 to 13 t CO₂-eq/capita, discuss the accuracy of advance and final emission estimates at local level, and show the weekly variability of emissions for three example municipalities with different emission profiles.     

Valuing the greenhouse gas emissions from nuclear power: A critical survey

This article screens 103 lifecycle studies of greenhouse gas-equivalent emissions for nuclear power plants to identify a subset of the most current, original, and transparent studies.     

Mitigating greenhouse gas emissions from China's cities: Case study of Suzhou

Knowledge of the factors driving greenhouse gas (GHG) emissions from cities is crucial to mitigating China's anthropogenic emissions. In this paper, the main drivers increasing GHG emissions from the Chinese city of Suzhou between 2005 and 2010 were identified and quantitatively analyzed using the Kaya identity and the log-mean Divisia index method. We found that economy and population were the major drivers of GHG emissions in Suzhou, having contributed 162.20% and 109.04%, respectively, to the increase in emissions. A decline in carbon intensity, which was caused by the declining energy intensity and an adjustment to the mixture of power and industrial structures, was the major determinant and accounted for a reduction of 171.24% in GHG emissions. Slowing and maintaining healthy growth rates of economy and population could be the primary and most effective means if Suzhou tries to curb the total emissions over the short term. It may be more realistic for Suzhou to control emissions by optimizing the economic structure for low-carbon industrial development because of the city's relative high energy requirements and low potential to mitigate GHGs by adjusting the energy mixture.     

Impact of distributed and independent power generation on greenhouse gas emissions: Sri Lanka

Sri Lanka has a hydropower dominated power system with approximately two thirds of its generation capacity based on large hydro plants. The remaining one third are based on oil fired thermal generation with varying technologies, such as oil steam, Diesel, gas turbines and combined cycle plants. A significant portion of this capacity is in operation as independent power plants (IPPs). In addition to these, Sri Lanka presently has about 40 MWs of mini-hydro plants, which are distributed in the highlands and their surrounding districts, mainly connected to the primary distribution system. Further, there are a few attempts to build fuel wood fired power plants of small capacities and connect them to the grid in various parts of the country.

The study presented in this paper investigates the impact of these new developments in the power sector on the overall emissions and the greenhouse gas (GHG) emissions in particular. It examines the resulting changes to the emissions and costs in the event of developing the proposed coal power plant as an IPP under different investment and operational conditions. The paper also examines the impact on emissions with 80 MWs of distributed power in different capacities of wind, mini-hydro and wood fired power plants.

It is concluded that grid connected, distributed power generation (DPG) reduces emissions, with only a marginal increase in overall costs, due to the reduction in transmission and distribution network losses that result from the distributed nature of generation. These reductions can be enhanced by opting for renewable energy based DPGs, as the case presented in the paper, and coupling them with demand side management measures. It is also concluded that there is no impact on overall emissions by the base load IPPs unless they are allowed to change over to different fuel types and technologies.     

The economic costs of reducing greenhouse gas emissions under a U.S. national renewable electricity mandate

The electricity sector is the largest source of greenhouse gas emissions (GHGs) in the U.S. Many states have passed and Congress has considered Renewable Portfolio Standards (RPS), mandates that specific percentages of electricity be generated from renewable resources. We perform a technical and economic assessment and estimate the economic costs and net GHG reductions from a national 25 percent RPS by 2025 relative to coal-based electricity. This policy would reduce GHG emissions by about 670 million metric tons per year, 11 percent of 2008 U.S. emissions. The first 100 million metric tons could be abated for less than $36/metric ton. However, marginal costs climb to $50 for 300 million metric tons and to as much as $70/metric ton to fulfill the RPS. The total economic costs of such a policy are about $35 billion annually. We also examine the cost sensitivity to favorable and unfavorable technology development assumptions. We find that a 25 percent RPS would likely be an economically efficient method for utilities to substantially reduce GHG emissions only under the favorable scenario. These estimates can be compared with other approaches, including increased R&D funding for renewables or deployment of efficiency and/or other low-carbon generation technologies.     

Land clearing and greenhouse gas emissions from Jatropha biofuels on African Miombo Woodlands

The paper investigates greenhouse gas (GHG) emissions from land use change associated with the introduction of large-scale Jatropha curcas cultivation on Miombo Woodland, using data from extant forestry and ecology studies about this ecosystem. Its results support the notion that Jatropha can help sequester atmospheric carbon when grown on complete wastelands and in severely degraded conditions. Conversely, when introduced on tropical woodlands with substantial biomass and medium/high organic soil carbon content, Jatropha will induce significant emissions that offset any GHG savings from the rest of the biofuel production chain. A carbon debt of more than 30 years is projected. On semi-degraded Miombo the overall GHG balance of Jatropha is found to hinge a lot on the extent of carbon depletion of the soil, more than on the state of the biomass. This finding points to the urgent need for detailed measurements of soil carbon in a range of Miombo sub-regions and similar tropical dryland ecosystems in Asia and Latin America. Efforts should be made to clarify concepts such as ‘degraded lands’ and ‘wastelands’ and to refine land allocation criteria and official GHG calculation methodologies for biofuels on that basis.     

Structural decomposition analysis of Australia's greenhouse gas emissions

A complex system of production links our greenhouse gas emissions to our consumer demands. Whilst progress may be made in improving efficiency, other changes in the production structure may easily annul global improvements. Utilising a structural decomposition analysis, a comparative-static technique of input–output analysis, over a time period of around 30 years, net greenhouse emissions are decomposed in this study into the effects, due to changes in industrial efficiency, forward linkages, inter-industry structure, backward linkages, type of final demand, cause of final demand, population affluence, population size, and mix and level of exports.Historically, significant competing forces at both the whole of economy and industrial scale have been mitigating potential improvements. Key sectors and structural influences are identified that have historically shown the greatest potential for change, and would likely have the greatest net impact. Results clearly reinforce that the current dichotomy of growth and exports are the key problems in need of address.     

Energy and associated greenhouse gas emissions from household appliances in Malaysia

Today, electricity is an indispensable key for civilization and development. The trend of electricity consumption is rather escalating. Electricity generation principally depends upon fossil fuels. In one hand, the stocks of these fuels have been confirmed to be critically limited. On the other hand, in process of electricity generation by means of these fuels, a number of poisonous by-products adversely affect the conservation of natural eco-system. Further, electricity driven appliances use emanate anti-environmental gases that also affect human health and climate. Therefore, estimation of energy consumption for operating household appliances, savings of energy under policy intervention, and emission of poisonous gases in a fast developing country deserve academic attention.     

Sectoral trends in global energy use and greenhouse gas emissions

Integrated assessment models have been used to project both baseline and mitigation greenhouse gas emissions scenarios. Results of these scenarios are typically presented for a number of world regions and end-use sectors, such as industry, transport, and buildings. Analysts interested in particular technologies and policies, however, require more detailed information to understand specific mitigation options in relation to business-as-usual trends. This paper presents sectoral trend for two of the scenarios produced by the Intergovernmental Panel on Climate Change's Special Report on Emissions Scenarios. Global and regional historical trends in energy use and carbon dioxide emissions over the past 30 years are examined and contrasted with projections over the next 30 years. Macro-activity indicators are analyzed as well as trends in sectoral energy and carbon demand. This paper also describes a methodology to calculate primary energy and carbon dioxide emissions at the sector level, accounting for the full energy and emissions due to sectoral activities.     

Reductions in greenhouse gas emissions and cost by shipping at lower speeds

CO₂ emissions from maritime transport represent a significant part of total global greenhouse gas (GHG) emissions. According to the International Maritime Organization (Second IMO GHG study, 2009), maritime transport emitted 1046 million tons (all tons are metric) of CO₂ in 2007, representing 3.3% of the world's total CO₂ emissions. The International Maritime Organization (IMO) is currently debating both technical and market-based measures for reducing greenhouse gas emissions from shipping. This paper presents investigations on the effects of speed reductions on the direct emissions and costs of maritime transport, for which the selection of ship classes was made to facilitate an aggregated representation of the world fleet. The results show that there is a substantial potential for reducing CO₂ emissions in shipping. Emissions can be reduced by 19% with a negative abatement cost (cost minimization) and by 28% at a zero abatement cost. Since these emission reductions are based purely on lower speeds, they can in part be performed now.     

Comparison of the technical potential for hydrogen,battery electric,and conventional light-duty vehicles to reduce greenhouse gas emissions and petroleum consumption in the United States

Light-duty vehicles (LDV) are responsible for a large fraction of petroleum use and are a significant source of greenhouse gas (GHG) emissions in the United States. Improving conventional gasoline-powered vehicle efficiency can reduce petroleum demand, however efficiency alone cannot reach deep GHG reduction targets, such as 80% below the 1990 LDV GHG emissions level. Because the cost and availability of low-GHG fuels will impose limits on their use, significant reductions in GHG emissions will require combinations of fuel and vehicle technologies that both increase efficiency and reduce the emissions from fuel production and use. This paper examines bounding cases for the adoption of individual technologies and then explores combinations of advanced vehicle and fuel technologies. Limits on domestic biofuel production—even combined with significant conventional combustion engine vehicle improvements—mean that hydrogen fuel cell electric or battery electric vehicles fueled by low-GHG sources will be necessary. Complete electrification of the LDV fleet is not required to achieve significant GHG reduction, as replacing 40% of the LDV fleet with zero-emission hydrogen vehicles while achieving optimistic biofuel production and conventional vehicle improvements can allow attainment of a low GHG emission target. Our results show that the long time scale for vehicle turnover will ensure significant emissions from the LDV sector, even when lower emission vehicles and fuels are widely available within 15 years. Reducing petroleum consumption is comparatively less difficult, and significant savings can be achieved using efficient conventional gasoline-powered vehicles.     

Life-cycle analysis of greenhouse gas emissions from hydrogen delivery: A cost-guided analysis

The cost of hydrogen delivery for transportation accounts for most of the current H₂ selling price; delivery also requires substantial amounts of energy. We developed harmonized techno-economic and life-cycle emissions models of current and future H₂ production and delivery pathways. Our techno-economic analysis of dispensed H₂ costs guided our selection of pathways for the life-cycle analysis. In this paper, we present the results of market expansion scenarios using existing capabilities (for example, those that use H₂ from steam methane reforming, chlor-alkali, and natural gas liquid cracker plants), as well as results for future electrolysis plants that use nuclear, solar, and hydroelectric power. Reductions in greenhouse gas emissions for fuel cell electric vehicles compared to conventional gasoline pathways vary from 40% reduction for fossil-derived H₂ to 20-fold for clean H₂. Supplemental tables with greenhouse gas emissions data for each step in the H₂ pathways enable readers to evaluate additional scenarios.     

Allocating greenhouse gas emissions to shipments in road freight transportation: Suggestions for a global carbon accounting standard

The European Norm EN 16258 was published in 2012 to provide a common methodology for the calculation and declaration of energy consumption and greenhouse gas emissions related to any transport operation. The objective was to offer a pragmatic and scientifically-acceptable approach that allows a wide group of users to prepare standardized, accurate, credible, comparable, and verifiable energy consumption and emission declarations. However, in its current form, EN 16258 contains gaps and ambiguities, and leaves room for interpretation, which makes comparisons of supply chains difficult. This research aims to overcome the shortcomings in the domain of allocating emissions from road freight transport operations to single shipments. Based on a discussion of emission drivers and the results of numerical experiments comparing the allocation vectors created by the EN 16258 allocation rules with those generated by the Shapley value, which is claimed to be the benchmark, ‘distance’ is identified as the single most useful unit for bridging the trade-off between accuracy and simplicity better than the other recommended allocation schemes. Thus, this paper claims that future versions of EN 16258 should only allow the allocation unit ‘distance.’ This will promote the accurateness, simplicity, consistency, transparency, and comparability of emission declarations.     

Reductions in cost and greenhouse gas emissions with new bulk ship designs enabled by the Panama Canal expansion

Historically, fuel costs have been small compared with the fixed costs of a bulk vessel, its crewing and management. Today, however, fuel accounts for more than 50% of the total costs. In combination with an introduction of stricter energy efficiency requirements for new vessels, this might make design improvement a necessity for all new bulk vessels. This is in contradiction to traditional bulk vessel designs, where the focus has been on maximizing the cargo-carrying capacity at the lowest possible building cost and not on minimizing the energy consumption. Moreover, the Panama Canal has historically been an important design criterion, while the new canal locks from 2014 will significantly increase the maximum size of vessels that can pass. The present paper provides an assessment of cost and emissions as a function of alternative bulk vessel designs with focus on a vessel's beam, length and hull slenderness, expressed by the length displacement ratio for three fuel price scenarios. The result shows that with slenderer hull forms the emissions drop. With today's fuel price of 600 USD per ton of fuel, emissions can thus be reduced by up to 15–25% at a negative abatement cost.     

Energy balance and greenhouse gas emissions from the production and sequestration of charcoal from agricultural residues

Agricultural residues (wheat/barley/oat straw) can be used to produce charcoal, which can then be either landfilled off-site or spread on the agricultural field as a means for sequestering carbon. One centralized and five portable charcoal production technologies were explored in this paper. The centralized system produced 747.95 kg-CO₂eq/tonne-straw and sequestered 0.204 t-C/t-straw. The portable systems sequestered carbon at 0.141–0.217 t-C/t-straw. The net energy ratio (NER) of the portable systems was higher than the centralized one at 10.29–16.26 compared to 6.04. For the centralized system, the carbon sequestration and the cumulative energy demand were most sensitive to the charcoal yield. Converting straw residues into charcoal can reduce GHG emissions by 80% after approximately 8.5 years relative to the baseline of in-field decomposition, showing these systems are effective carbon sequestration methods.     

Effects of US biofuel policies on US and world petroleum product markets with consequences for greenhouse gas emissions

US biofuel policy includes greenhouse gas reduction targets. Regulators do not address the potential that biofuel policy can have indirect impacts on greenhouse gases through its impacts on petroleum product markets, and scientific research only partially addresses this question. We use economic models of US biofuel and agricultural markets and US and world petroleum and petroleum product markets to show that discontinuing biofuel tax credits and ethanol tariff lower biofuel use could lead to increased US petroleum product use, and a reduction in petroleum product use in other parts of the world. The net effect is lower greenhouse gas emissions. Under certain assumptions, we show that biofuel use mandate elimination can have positive or negative impacts on greenhouse gas emissions. The magnitude and the direction of effects depend on how US biofuel trade affects biofuel in other countries with different emissions, context that determines how important use mandates are in the first place, who pays mandate costs, and the price responsiveness of global petroleum supplies and uses. However, our results show that counter-intuitive effects are possible and discourage broad conclusions about the greenhouse gas impacts of removing these elements of US biofuel policy.     

Incorporating uncertainty analysis into life cycle estimates of greenhouse gas emissions from biomass production

Before further investments are made in utilizing biomass as a source of renewable energy, both policy makers and the energy industry need estimates of the net greenhouse gas (GHG) reductions expected from substituting biobased fuels for fossil fuels. Such GHG reductions depend greatly on how the biomass is cultivated, transported, processed, and converted into fuel or electricity. Any policy aiming to reduce GHGs with biomass-based energy must account for uncertainties in emissions at each stage of production, or else it risks yielding marginal reductions, if any, while potentially imposing great costs.This paper provides a framework for incorporating uncertainty analysis specifically into estimates of the life cycle GHG emissions from the production of biomass. We outline the sources of uncertainty, discuss the implications of uncertainty and variability on the limits of life cycle assessment (LCA) models, and provide a guide for practitioners to best practices in modeling these uncertainties. The suite of techniques described herein can be used to improve the understanding and the representation of the uncertainties associated with emissions estimates, thus enabling improved decision making with respect to the use of biomass for energy and fuel production.     

Imported palm oil for biofuels in the EU: Profitability,greenhouse gas emissions and social welfare effects

We examine the social desirability of renewable diesel production from imported palm oil in the EU when greenhouse gas emissions are taken into account. Using a partial market equilibrium model, we also study the sectoral social welfare effects of a biofuel policy consisting of a blend mandate in a small EU country (Finland), when palm oil based diesel is used to meet the mandated quota for biofuels. We develop a market equilibrium model for three cases: i) no biofuel policy, ii) biofuel policy consisting of socially optimal emission-based biofuel tax credit and iii) actual EU biofuel policy. Our results for the EU biofuel market, Southeast Asia and Finland show very little evidence that a large scale use of imported palm oil in diesel production in the EU can be justified by lower greenhouse gas emission costs. Cuts in emission costs may justify extensive production only if low or negative land-use change emissions result from oil palm cultivation and if the estimated per unit social costs of emissions are high. In contrast, the actual biofuel policies in the EU encourage the production of palm oil based diesel. Our results indicate that the sectoral social welfare effects of the actual biofuel policy in Finland may be negative and that if emissions decrease under actual biofuel policy, the emission abatement costs can be high regardless of the land use change emissions.     

Greenhouse gas emissions in the nuclear life cycle: A balanced appraisal

In order to combat global warming, a detailed knowledge of the greenhouse gas (GHG) emissions associated with different energy conversion technologies is important. For nuclear energy, GHG emissions result from different process stages of the whole fuel cycle. A life-cycle assessment offers the possibility to properly calculate these emissions. In the past, both indirect energy use and GHG emissions were studied by many researchers. Most of the studies result in low indirect emissions comparable to wind turbines. However, some of the studies in the literature obtain high results adding up to a significant fraction of the direct emissions from a CCGT.     

Reducing greenhouse gas emissions by inducing energy conservation and distributed generation from elimination of electric utility customer charges

This paper quantifies the increased greenhouse gas emissions and negative effect on energy conservation (or “efficiency penalty”) due to electric rate structures that employ an unavoidable customer charge. First, the extent of customer charges was determined from a nationwide survey of US electric tariffs. To eliminate the customer charge nationally while maintaining a fixed sum for electric companies for a given amount of electricity, an increase of 7.12% in the residential electrical rate was found to be necessary. If enacted, this increase in the electric rate would result in a 6.4% reduction in overall electricity consumption, conserving 73 billion kW h, eliminating 44.3 million metric tons of carbon dioxide, and saving the entire US residential sector over $8 billion per year. As shown here, these reductions would come from increased avoidable costs, thus leveraging an increased rate of return on investments in energy efficiency, energy conservation behavior, distributed energy generation, and fuel choices. Finally, limitations of this study and analysis are discussed and conclusions are drawn for proposed energy policy changes.