Electrochemical removal of metals from crude oil samples

Removal of vanadium from vanadyl (IV) meso-tetra-phenylporphyrin (VO-MTPP) and vanadyl (IV) octa-ethylporphyrin (VO-OEP) and metals removal from Ayacucho Venezuelan crude oil samples were performed using electrochemical techniques. According to cyclic voltammograms, a potential of − 2.3 V vs. Ag/AgNO₃ (0.1 M), LiClO₄ (0.1 M) in acetonitrile, was chosen for running electrolysis at platinum (Pt), graphite (G) and glassy carbon (GC) electrodes. Qualitative analysis was done by cyclic voltammetry (CV) and atomic absorption spectroscopy (AAS) while quantification was performed by AAS and inductively coupled plasma/atomic emission spectrometry (ICP/AES). Three stages (best results) of the study are reported: (a) when using commercial porphyrins; the best conditions for electrolysis were: tetrahydrofuran (THF)/20% methanol (MeOH)/1% perchloric acid (HClO₄) on GC, producing 84% hydro-demetalation (HDM) for VO-MTPP, and 78% HDM for VO-OEP; (b) when using extracts of crude oil; demetalation percentages, after 90 min of electrolysis, on graphite, and after 120 min of electrolysis on platinum, were 66.44% and 64.10% HDM respectively, no discrimination of metals under these conditions (c) from electrolysis in whole crude oil, quantitative analysis gave: vanadium (V) 31.2 mg/kg, iron (Fe) 65, 0 mg/kg and nickel (Ni) 6, 3 mg/kg, with charge efficiencies of V (7.5%), Fe (79.6%) and Ni (8.2%).     

Fatty Imidazolines: A Novel Extractant for the Recovery of Palladium(II) from Hydrochloric Acid Solutions

The extraction of palladium(II) from hydrochloric acid solutions with a novel highly basic extractant, a mixture of homologous 1-[2-(alkanoylamino)ethyl]-2-alkyl-2-imidazolines (AAI) in toluene with 15% (v/v) of n-octanol was studied. Palladium(II) is rapidly and most effectively extracted with AAI hydrochloride at the low hydrochloric acid (chloride ions) concentration (up to 1 M) and can be completely separated from Fe(III), Cu(II), and Co(II). The palladium(II) extraction at the optimum acidity occurs via an anion-exchange mechanism with the formation of ionic associates (LH)₂PdCl₄ (K _ex = (1.5 ± 0.2) · 10⁴ at 0.5 M HCl) and is accompanied by the dimerization of palladium(II) in the organic phase with the formation of ionic associates (LH)₂Pd₂Cl₆ (K _dim = (3.9 ± 0.4) · 10^?4 at 0.5 M HCl). The anion-exchange extraction of palladium(II) at the acidity of 0.5 M HCl is temperature independent in the range 20–49°C. Complete stripping of palladium(II) can be performed using a 5% solution of thiourea in 0.1 M HCl.     

SOLVENT EXTRACTION OF Au(III), Pd(II) AND Pt(lV) WITH SULFUR-CONTAINING METHYLPHOSPHONATES AND β-KETOPHOSPHONATE

Three sulfur-containing methylphosphonates, dibutyl propylthiomethylphosphonate, (C₄H₈O)₂P(0)CH₂SC₃H₇,(DBPTMP),dibutyl propylsulfinylmethylphosphonate, (C₄H₉0)₂P(0)CH₂S(0)C₃H₇, (DBPSiMP) and dibutyl propylsulf onylmethylphosphonate, (C₄H₈O)₂P(0)CH₂S(0) C₃H₇ (DBPSiMP) were synthesized. The extraction of gold(III), palladium(II) and platinum(IV) from HCl media with the synthesized compounds and dibutyl 2-keto-3-methylbutyl-phosphonate, (C₄H₈O)₂P(0)CH₂C (0) CH(CH₃) CH₃, (DBKPP) was investigated at various mixing times and acidities. DBPTMP and DBPSiMP were found to provide nearly quantitative extraction of Au(III) and Pd(II) with short equilibration times for Pd(II) extraction. DBKPP was selective for Au(TII) over Pt(IV) and Pd(II) at high acidity. The behavior of these extractants was also examined in comparison with the corresponding monofunctional extractants, dibutyl butylphosphonate(DB‘BP’), tributyl-phosphate(TBP), dioctylsulphide(DOS) and dioctyl-sulphoxide(DOSO).     

Synthesis of substituted fatty oxathiolanes and thioethers from an allylic oxo fatty acid ester

Substituted oxathiolane and thioether derivatives have been synthesized from an allylic oxo fatty acid ester. The reaction of methyl 4-oxo-trans-2-octadecenoate with 3-mercaptopropan-1,2-diol (1-thioglycerol) affords methyl 4-(3′-hydroxymethyl-1′,4′-oxathiolane)-2(3)-(O-mercaptopropan-1″,2″-diol)-octadecanoate (II), methyl 4-oxo-2(3)-(O-mercaptopropan-1′,2′-diol)-octadecanoate (III), methyl 4-(3′-hydroxy-l′,5′-oxathiane)-2 (3)-(S-mercaptopropan-1″,2″-diol)-octadecanoate (IV), methyl 4-oxo-2(3)-(S-mercaptopropan-1′, 2′diol)-octadecanoate (V) and methyl 4-(3′-hydroxymethyl-1′, 4′-oxathiolane)-2(3)-(S-mercaptopropan-1″, 2″-diol)-octadecanoate (VI). Structures of the individual reaction products have been established on the basis of spectral data and microanalyses.     

Synthesis,characterization and thermal behaviors of polymers containing organosilicon groups

Various bis(silyl)ethenyl groups were attached to the aromatic ring of poly(α-methylstyrene) via Peterson olefination reaction of (RMe₂Si)₃CLi (R = H, Me and Ph) with formylated poly(α-methylstyrene) (Pα-MS-CHO) to give poly(α-methylstyrene)-co-[2,2-bis(silyl)ethenyl(α-methylstyrene)] as functionalized poly(α-methylstyrene) (Pα-MS-SiMe₂H, Pα-MS-SiMe₃ and Pα-MS-SiMe₂Ph). The trimethylsilyl groups of Pα-MS-SiMe₃ have been converted to 2,2-dibromoethenyl and epoxybis(silanes) groups via NBS-based bromodesilylation and MCPBA-based epoxidation respectively. The thermal degradation behaviors of the polymers were studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC).     

Extraction Properties of P(O)-Modified N-Aryl-Carbamoylmethylphosphine Oxides in Nitric Acid Media

Novel polyfunctional neutral organophosphorus compounds, P(O)-modified N-aryl- carbamoylmethylphosphine oxides, Ph₂P(O)CH₂C(O)NH-(o-C₆H₄)(CH₂)_n-P(O)Ph₂ and Ph₂P(O)CH₂C(O)NH-(m-C₆H₄)(CH₂)_n-P(O)Ph₂ (n = 1,2), were synthesized and studied as extractants for U(VI), Th(IV) and Ln(III) from HNO₃ solutions. The influence of aqueous and organic phases on the extraction efficiency was elucidated and stoichiometry of the complexes extracted was determined. Introduction of an additional phosphoryl group into the phenyl substitutent at the nitrogen atom of diphenyl(N-phenylcarbamoylmethyl)phosphine oxide resulted in an increase of the efficiency of U(VI), Th(IV), Ln(III), and Re(VII) extraction.     

Hetero-stereocomplex formation of stereoblock copolymer of substituted and non-substituted poly(lactide)s

The crystallization behavior of the stereoblock copolymer of substituted and non-substituted poly(lactide)s, i.e., poly(d-2-hydroxybutyrate) and poly(l-lactide) chains having the opposite configurations [P(D-2HB)-b-PLLA] and the reference block copolymer of poly(d-2-hydroxybutyrate) and poly(d-lactide) chains with the identical configurations [P(D-2HB)-b-PDLA] was investigated. At the crystallizable temperature range of 60-160 °C, the crystallized P(D-2HB)-b-PLLA contained solely the hetero-stereocomplex crystallites as a crystalline species, without formation of poly(d-2-hydroxybutyrate) or poly(l-lactide) homo-crystallites, in contrast with their polymer blends. On the other hand, at the crystallizable temperature range of 60-140 °C, the crystallized P(D-2HB)-b-PDLA had only PDLA homo-crystallites as crystalline species, reflecting no co-crystallites formation between poly(d-2-hydroxybutyrate) and poly(d-lactide) chains having the same configurations. The equilibrium melting temperature of hetero-stereocomplex crystallites in P(D-2HB)-b-PLLA was 189.0 °C, which was higher than 171.3 °C of PDLA homo-crystallites in P(D-2HB)-b-PDLA. Although the final crystallinity of P(D-2HB)-b-PLLA was higher than those of P(D-2HB)-b-PDLA, the spherulite growth rate of P(D-2HB)-b-PLLA was lower.The regime analysis indicated unusual nucleation mechanism of P(D-2HB)-b-PLLA.     

Cationic Mobility Via Cation-Exchange Mechanism on Poly(8-Hydroxyquinoline) Matrix

The insertion of Al(III) cation into a poly(8-Hydroxyquinoline) (PHQ) instead of some metal ions such as Co(II), Ni(II), Zn(II) or Fe(III) ions via cation-exchange mechanism has been studied by several techniques. The presence of Al(III) and the absence of Co(II) cations has been proved by elemental analysis of the polymer chelates product. Molecular mechanics (MM+) calculations showed that the potential energy (PE, kJ mol⁻¹) of the optimum molecular geometric structure (OMG) of the PHQ–Al(III) matrix is about seventy-six (76.185) greater than the PE of the PHQ–Co(II) complex. The TGA thermograms show that the PHQ–Al(III) matrix is thermally unstable than the PHQ–Co(II) complex under the same conditions. These observations indicate that the PHQ–Al(III) is expanded coil-like form. So, the thermal decomposition of PHQ–Al(III) complex is easy than the compacted coil-likes form of PHQ–Co(II) complex. The incorporation of Al(III) ion via cation-exchange properties have been investigated by spectrophotometric technique. The decrease of the absorbance at about ~370 nm of PHQ–Co(II) complex associated with increasing concentration of Al(III) revealed the replacement of that metal ion by Al(III) into PHQ chain. The cation-exchange constant (K _ex) of the divalent ions [Ni(II), Co(II), Cr(II), Zn(II), Mn(II), Mg(II) and Cu(II)] from PHQ–M(II) by the additions of Al(III) according to the following series: Ni(II) > Co(II) > Cr(II) > Cu(II) > Zn(II) > Mn(II) > Mg(II).     

n-3 Fatty Acids Abrogate Dyslipidemia-Induced Changes in Bile Acid Uptake,Synthesis, and Transport in Young and Aged Dyslipidemic Rats

In this study, the effect of n-3 fatty acids (FA) [α-linolenic acid (ALA) and eicosapentaenoic acid (EPA) + docosahexaenoic acid (DHA)] on the intestinal bile acid (BA) uptake, hepatic BA synthesis, and enterohepatic bile acid transporters (BAT) was assessed in young and aged dyslipidemic rats. Dyslipidemia was induced in young and aged rats by feeding a high-fat (HF) diet. Experimental groups received diets containing canola oil (HF + CNO) and fish oil (HF + FO) as a source of ALA and EPA + DHA, respectively. After 60 days of feeding, intestinal BA uptake and expression of apical sodium-dependent bile acid transporter (Asbt), organic solute transporter-alpha/beta (Osta/b) messenger RNA (mRNA), and hepatic expression of Na⁺ taurocholate cotransporting polypeptide (Ntcp), bile salt export pump (Bsep), cholesterol 7-α hydroxylase A1 (Cyp7a1), Farnesoid X receptor (Fxr), small heterodimer partner-1 (Shp), liver receptor homolog-1 (Lrh-1), and hepatic nuclear factor-4 alpha (Hnf4a) mRNA were measured. Hepatic 3-hydroxy-3-methyl-glutaryl-coenzyme A (HMG-CoA) reductase activity and total BA in serum, liver, and feces were assessed. The dyslipidemic HF group had: (1) increased intestinal BA uptake and Asbt and Osta/b mRNA expression, (2) increased BA in serum, (3) decreased hepatic expression of Ntcp, Bsep, and Cyp7a1 mRNA, (4) increased activity of HMG-CoA reductase, (5) increased hepatic expression of Fxr and Shp mRNA, (6) decreased hepatic expression of Lrh-1 and Hnf4a mRNA, and (7) decreased BA in feces, when compared to control, HF + CNO, and HF + FO groups. Immunostaining revealed increased expression of intestinal Asbt and hepatic Ntcp protein in the HF group when compared to control, HF + CNO, and HF + FO groups. n-3 FA abrogated dyslipidemia-induced changes in the intestinal uptake, hepatic synthesis, and enterohepatic transporters of BA in both young and aged rats. EPA + DHA was more effective than ALA in modulating dyslipidemia-induced changes.     

Highly efficient blue organic light-emitting diodes using quantum well-like multiple emissive layer structure

In this study, the properties of blue organic light-emitting diodes (OLEDs), employing quantum well-like structure (QWS) that includes four different blue emissive materials of 4,4′-bis(2,2′-diphenylyinyl)-1,1′-biphenyl (DPVBi), 9,10-di(naphth-2-yl)anthracene (ADN), 2-(N,N-diphenyl-amino)-6-[4-(N,N-diphenyl amine)styryl]naphthalene (DPASN), and bis(2-methyl-8-quinolinolate)-4-(phenyl phenolato) aluminum (BAlq), were investigated. Conventional QWS blue OLEDs composed of multiple emissive layers and charge blocking layer with lower highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy level, and devices with triple emissive layers for more significant hole-electron recombination and a wider region for exciton generation were designed. The properties of triple emissive layered blue OLEDs with the structure of indium tin oxide (ITO) /N,N′-diphenyl-N,N′-bis(1-naphthyl-phenyl)-(1,1′-biphenyl)-4,4′-diamine (NPB) (700 Ǻ)/X (100 Ǻ)/BAlq (100 Ǻ)/X (100 Ǻ)/4,7-diphenyl-1,10-phenanthroline (Bphen) (300 Ǻ)/lithium quinolate (Liq) (20 Ǻ)/aluminum (Al) (1,200 Ǻ) (X = DPVBi, ADN, DPASN) were examined. HOMO-LUMO energy levels of DPVBi, ADN, DPASN, and BAlq are 2.8 to 5.9, 2.6 to 5.6, 2.3 to 5.2, and 2.9 to 5.9 eV, respectively. The OLEDs with DPASN/BAlq/DPASN QWS with maximum luminous efficiency of 5.32 cd/A was achieved at 3.5 V.     

Conductimetric investigations on salts in N,N-dimethylthioformamide at 25° C

Conductimetric measurements have been performed on solutions of the following salts in N,N-dimethylthioformamide (DMTF) at 25°C:- triisoamyl-n-butylammonium tetraphenylborate, triisoamyl-n-butylammonium iodide, triisoamyl-n-butylammonium perchlorate, tetra-n-butylammonium tetraphenylborate, tetra-n-butylammonium iodide, tetra-n-butylammonium perchlorate, bis(DMTF)copper(I)chloride, bis(DMTF)copper(I) bromide, bis(DMTF)copper(I) iodide, tetrakis(DMTF)copper(I) perchlorate, bis(DMTF)silver(I) chloride, bis(DMTF)silver(I) bromide and (DMTF)silver(I) iodide. The data have been analysed with the Pitts and the Fuoss—Justice conductivity equations and single ion conductivities have been calculated based on the assumption of equal limiting anion and cation conductivities for triisoamyl-n-butylammonium tetraphenylborate.     

Preparation and structural characterization of mercury 21-thiaporphyrin complex: HgII(Stpp)Cl (Stpp=tetraphenyl-21-thiaporphyrin anion)

Treatment of tetraphenyl-21-thiaporphyrin (StppH) with Hg(OAc)₂ in CH₂Cl₂ yields diamagnetic Hg^II(Stpp)Cl complex. The coordination sphere around Hg²⁺ in the monomeric molecule is described as a five-coordinate distorted trigonal bipyramid with the bonding to the three pyrrole nitrogens [Hg(1)–N=2.104(4), 2.626(4), 2.640(4) Å], the thiophene sulfur [Hg(1)–S=2.801(1) Å], and one axial chloride ligand [Hg(1)–Cl(1)=2.318(1) Å]. The plane of the three pyrrole nitrogen atoms [i.e., N(1), N(2), N(3)] bonded to Hg²⁺ is adopted as a reference plane 3N. Because of its larger size, the Hg²⁺ is considerably out of the 3N plane; its displacement of 1.41 Å is in the same direction as that of the apical Cl⁻ ligand. The thiophene ring is slightly folded so that the dihedral angle between the C(13)–C(14)–C(15)–C(16) and C(13)–S(1)–C(16) planes is 7.3°.     

Dichlorophenylacrylonitriles as AhR Ligands That Display Selective Breast Cancer Cytotoxicity in vitro

Knoevenagel condensation of 3,4‐dichloro‐ and 2,6‐dichlorophenylacetonitriles gave a library of dichlorophenylacrylonitriles. Our leads (Z)‐2‐(3,4‐dichlorophenyl)‐3‐(1H‐pyrrol‐2‐yl)acrylonitrile ( 5 ) and (Z)‐2‐(3,4‐dichlorophenyl)‐3‐(4‐nitrophenyl)acrylonitrile ( 6 ) displayed 0.56±0.03 and 0.127±0.04 μm growth inhibition (GI₅₀) and 260‐fold selectivity for the MCF‐7 breast cancer cell line. A 2,6‐dichlorophenyl moiety saw a 10‐fold decrease in potency; additional nitrogen moieties (‐NO₂) enhanced activity (Z)‐2‐(2,6‐dichloro‐3‐nitrophenyl)‐3‐(2‐nitrophenyl)acrylonitrile ( 26 ) and (Z)‐2‐(2,6‐dichloro‐3‐nitrophenyl)‐3‐(3‐nitrophenyl)acrylonitrile ( 27 ), with the corresponding ‐NH₂ analogues (Z)‐2‐(3‐amino‐2,6‐dichlorophenyl)‐3‐(2‐aminophenyl)acrylonitrile ( 29 ) and (Z)‐2‐(3‐amino‐2,6‐dichlorophenyl)‐3‐(3‐aminophenyl)acrylonitrile ( 30 ) being more potent. Despite this, both 29 (2.8±0.03 μm ) and 30 (2.8±0.03 μm ) were found to be 10‐fold less cytotoxic than 6 . A bromine moiety effected a 3‐fold enhancement in solubility with (Z)‐3‐(5‐bromo‐1H‐pyrrol‐2‐yl)‐2‐(3,4‐dichlorophenyl)acrylonitrile 18 relative to 5 at 211 μg mL^?1. Modeling‐guided synthesis saw the introduction of 4‐aminophenyl substituents (Z)‐3‐(4‐aminophenyl)‐2‐(3,4‐dichlorophenyl)acrylonitrile ( 35 ) and (Z)‐N‐(4‐(2‐cyano‐2‐(3,4‐dichlorophenyl)vinyl)phenyl)acetamide ( 38 ), with respective GI₅₀ values of 0.030±0.014 and 0.034±0.01 μm . Other analogues such as 35 and 36 were found to have sub‐micromolar potency against our panel of cancer cell lines (HT29, colon; U87 and SJ‐G2, glioblastoma; A2780, ovarian; H460, lung; A431, skin; Du145, prostate; BE2‐C, neuroblastoma; MIA, pancreas; and SMA, murine glioblastoma), except compound 38 against the U87 cell line. A more extensive evaluation of 38 ((Z)‐N‐(4‐(2‐cyano‐2‐(3,4‐dichlorophenyl)vinyl)phenyl)acetamide) in a panel of drug‐resistant breast carcinoma cell lines showed 10–206 nm potency against MDAMB468, T47D, ZR‐75‐1, SKBR3, and BT474. Molecular Operating Environment docking scores showed a good correlation between predicted binding efficiencies and observed MCF‐7 cytotoxicity. This supports the use of this model in the development of breast‐cancer‐specific drugs.     

NMR and FT-IR studies of sulfonated styrene-based homopolymers and copolymers

A series of sodium poly(styrene sulfonate)-block-poly(4-tert-butylstyrene) (NaPSS-b-PtBS) copolymers and related homopolymers were characterized by Fourier transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The homopolymers included polystyrene (PS), poly(4-tert-butylstyrene) (PtBS), sodium poly(4-styrene sulfonate) (NaP4SS), sodium poly(styrene sulfonate) (NaPSS) with various sulfonation levels, and partially sulfonated PtBS (PtBSS). The structures of NaPSS and PtBSS were elucidated, and the effect of sulfonation level on the NaPSS FT-IR spectrum was studied. The characteristic peaks for NaPSS and PtBSS in FT-IR and NMR spectra were identified.     

Photocatalytic degradation of diclofenac using hybrid MIL-53(Al)@TiO2 and MIL-53(Al)@ZnO catalysts

In this work, TiO₂ and ZnO were incorporated successfully into a MIL-53(Al) metal–organic framework (MOF) to form nanocomposites via a facile post-modification technique. The hybrid MIL-53(Al)@TiO₂ and MIL-53(Al)@ZnO were characterized by several characterization tests. The X-ray diffraction (XRD), Fourier-transform infrared (FTIR), and field-emission scanning electron microscopy (FE-SEM) analyses showed evidence of the successful incorporation of TiO₂ and ZnO within the MIL-53(Al) framework. The thermal gravimetric analysis (TGA) analysis demonstrated the excellent thermal stability of MIL-53(Al)@TiO₂ and MIL-53(Al)@ZnO, while diffuse reflectance spectroscopy (DRS) determined the direct optical band gaps of MIL-53(Al)@ZnO and MIL-53(Al)@TiO₂ to be 3.24 and 3.34 eV, respectively. The composites were also tested for the photocatalytic degradation of diclofenac (DCF) as a micropollutant. The DCF degradation efficiency of the photocatalysts was ranked in the following order: MIL-53(Al)@TiO₂ > MIL-53(Al) > TiO₂ > ZnO > MIL-53(Al)@ZnO. The incorporation of TiO₂ enhanced the optical properties of MIL-53 (Al), which was confirmed with the superior photodegradation efficiency of MIL-53(Al)@TiO₂ (>85% in 2 h) as compared to the pristine MIL-53(Al) (around 80% in 2 h). The improvement in the photodegradation of the hybrid-MOF is mostly associated with the possible dual function of the adsorption and photodegradation mechanisms. The reusability of MIL-53(Al) and its composites was inspected over 3 cycles of photodegradation experiments with DCF. The photocatalytic activity of MIL-53(Al)@TiO₂ remained unchanged (>90%), while for MIL-53(Al) and MIL-53(Al)@ZnO a slight drop was observed over three cyclic degradation experiments. Fluorescence measurements revealed that the hydroxyl radical is an important reactive oxygen species produced by all the photocatalysts that aid in the photodegradation of DCF. Furthermore, the kinetic modelling of the photoreaction identified a second-order kinetics for all catalysts. Experiments with scavengers showed that hydroxyl radicals played a major role in the photocatalytic process, and it was found that only 2 h of treatment was sufficient to obtain a considerable chemical oxygen demand (COD) reduction of 58%.     

4-ACYLBIS(1-PHENYL-3-METHYL-5-PYRAZOLONES) AS EXTRACTANTS FOR f-ELEMENTS

ABSTRACT

The liquid-liquid extraction of early actinides such as thorium(IV) and uranium(VI) and trivalent lanthanoids such as neodymium(lll), europium(lll) and lutetium(lll) from nitrate solutions was studied using 4-sebacoylbis(1-phenyl-3-methyl-5-pyrazolone) (H₂SP) and 4-dodecandioyl-bis(1-phenyl-3-methyl-5-pyrazolone) (H₂DdP) in chloroform as extractants. The results demonstrate that these metal ions are extracted into chloroform as Th(SP)₂, Th(DdP)₂, UO₂(HSP)₂, UO₂(HDdP)₂, Ln(SP)(HSP) and Ln(DdP)(HDdP) with H₂SP or H₂DdP. The equilibrium constants of the above species were deduced by non-linear regression analysis. The results clearly highlight that thorium(IV) can be selectively separated from uranium(Vl) and trivalent lanthanoids when extracted from 0.2 mol/dm³ nitric acid solutions using 4-acylbis(1-phenyl-3-methyl- 5-pyrazolones). Thorium(IV), uranium(VI) and lutetium(lll) complexes of H₂SP were synthesised and characterised by IR and ¹H NMR spectral data to further clarify the nature of the complexes.     

Synthesis of pH-sensitive hollow polymer microspheres and their application as drug carriers

The pH-sensitive hollow poly(N,N′-methylene bisacrylamide-co-methacrylic acid) (P(MBAAm-co-MAA)) microspheres were prepared by a two-stage distillation precipitation polymerization to afford a core-shell poly(methacrylic acid)/poly(N,N′-methylene bisacrylamide-co-methacrylic acid) (PMAA/(P(MBAAm-co-MAA))) microsphere with subsequent removal of poly(methacrylic acid) (PMAA) core. PMAA/P(MBAAm-co-MAA) core-shell microspheres were synthesized by the second-stage copolymerization of N,N′-methylene bisacrylamide (MBAAm) as crosslinker and the functional methacrylic acid (MAA) comonomer in acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator. The pH-responsive properties of hollow P(MBAAm-co-MAA) microspheres were investigated by dynamic laser scattering (DLS). The loading and controlled-release behavior of the drug for hollow P(MBAAm-co-MAA) microspheres was strongly dependent on the pH values with doxorubicin hydrochloride (DXR) as a model molecule. The core-shell and hollow polymer microspheres were characterized by transmission electron microscopy (TEM), Fourier-transform infrared spectra (FT-IR), DLS and elemental analysis.     

Surface segregation and miscibility in blends of poly(vinylidene fluoride-co-hexafluoro-acetone) with poly(butyl acrylate)

The surface segregation in poly(butyl acrylate) (PBA)/poly(vinylidene fluoride-co-hexafluoro-acetone) [P(VDF-HFA)] blends was confirmed by X-ray photoelectron spectroscopy (XPS), and is thought to be caused because the surface tension of P(VDF-HFA) is smaller than that of PBA. The PBA/P(VDF-HFA) blends were miscible at room temperature and exhibited a lower critical solution temperature (LCST) phase behavior. Thus, it was considered that the surface segregation of the P(VDF-HFA) component in PBA/P(VDF-HFA) blends was caused by the difference in surface tension between the components. Depth profiles [In(<Ø₁ (d) -Ø^b ₁) vs. depth (d), where Ø₁ (d) and Ø^b ₁ are the volume fractions at depth d from the surface and into the bulk, respectively] for PBA/P(VDF-HFA) blends were constructed by the mean-field treatment. The ln(Ø₁(d) - Ø^b ₁) vs. d plots for the PBA/P(VDF-HFA) blends could be approximated by a straight line.