Use of ultrafine rice husk ash with high-carbon content as pozzolan in high performance concrete

Rice husk ash (RHA) has been generated in large quantities in rice producing countries. This by-product can contain non-crystalline silica and thus has a high potential to be used as cement replacement in mortar and concrete. However, as the RHA produced by uncontrolled burning conditions usually contains high-carbon content in its composition, the pozzolanic activity of the ash and the rheology of mortar or concrete can be adversely affected. In this paper the influence of different grinding times in a vibratory mill, operating in dry open-circuit, on the particle size distribution, BET specific surface area and pozzolanic activity of the RHA is studied, in order to improve RHA’s performance. In addition, four high-performance concretes were produced with 0%, 10%, 15%, and 20% of the cement (by mass) replaced by ultrafine RHA. For these mixtures, rheological, mechanical and durability tests were performed. For all levels of cement replacement, especially for the 20%, the ultra-fine RHA concretes achieved superior performance in the mechanical and durability tests compared with the reference mixture. The workability of the concrete, however, was reduced with the increase of cement replacement by RHA.     

Effect of utilizing unground and ground normal and black rice husk ash on the mechanical and durability properties of high-strength concrete

The aim of the present study is to investigate the effects of utilizing different processings of normal rice husk ash (RHA) and black rice husk ash (BRHA) on the mechanical and durability properties of high-strength concrete (HSC). Mechanical and durability properties of HSC were evaluated on concrete mixes containing unground BRHA and RHA and ground BRHA and RHA, their average particles sizes being 165, 85, 67 and 24 µm, respectively. The replacement of ordinary Portland cement with the ashes was adopted at 20%. The results showed that incorporating any form of RHA and BRHA in HSC reduced the slump value. The surface areas of RHA and BRHA, not their carbon content, determined the dosage of superplasticizer needed to achieve a targeted slump value. Concrete with unground and ground RHA incorporated exhibited 30% higher compressive strength while unground BRHA produced 30% lower compressive strength than that of the control concrete. Incorporating unground and ground RHA showed a synergy between filler and pozzolanic effect and had insignificant difference in mechanical and durability properties of the concretes. Meanwhile, incorporating ground BRHA showed a dominant filler effect in the concrete. Overall, the improvement of splitting tensile strength and modulus of elasticity of both RHA and GBRHA concrete showed a similar trend to that of the compressive strength of RHA concrete. The durability of concretes with unground and ground RHA and ground BRHA incorporated showed better performance than that of the control concrete. The material with 20% ground BRHA as partial cement replacement in HSC of Grade 50 could be used without any reduction in the mechanical and durability properties. Use of unground BRHA is not recommended because it did not improve these properties.     

Physical and pozzolanic action of mineral additions on the mechanical strength of high-performance concrete

Pozzolans play an important role when added to Portland cement because they usually increase the mechanical strength and durability of concrete structures. The most important effects in the cementitious paste microstructure are changes in pore structure produced by the reduction in the grain size caused by the pozzolanic reactions pozzolanic effect (PE) and the obstruction of pores and voids by the action of the finer grains (physical or filler effect). Few published investigations quantify these two effects. Twelve concrete mixtures were tested in this study: one with Portland cement (control), nine mixtures with 12.5%, 25% and 50% of replacement of cement by fly ash, rice husk ash and limestone filler; two with (12.5+12.5)% and (25+25)% of fly ash and rice husk ash. All the mixtures were prepared with water/binder ratios of 0.35, 0.50, and 0.65. The compressive strength for the samples was calculated in MPa per kg of cement. The remaining contents of calcium hydroxide and combined water were also tested. The results show that the pozzolanic and physical effects have increased as the mineral addition increased in the mixture, being higher after 91 days than after 28 days. When the results for the same strength values are compared (35 and 65 MPa), it was observed that the filler effect (FE) increased more than the pozzolanic effect. The PE was stronger in the binary and ternary mixtures prepared with rice husk ash in proportions of 25% or higher.     

Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete

Rice husk ash (RHA) has been used as a highly reactive pozzolanic material to improve the microstructure of the interfacial transition zone (ITZ) between the cement paste and the aggregate in high-performance concrete. Mechanical experiments of RHA blended Portland cement concretes revealed that in addition to the pozzolanic reactivity of RHA (chemical aspect), the particle grading (physical aspect) of cement and RHA mixtures also exerted significant influences on the blending efficiency. The relative strength increase (relative to the concrete made with plain cement, expressed in %) is higher for coarser cement. The gap-grading phenomenon is expected to be the underlying mechanism. This issue is also approached by computer simulation. A stereological spacing parameter (i.e., mean free spacing between mixture particles) is associated with the global strength of the blended model cement concretes. This paper presents results of a combined mechanical and computer simulation study on the effects of particle size ranges involved in RHA-blended Portland cement on compressive strength of gap-graded concrete in the high strength/high performance range. The simulation results demonstrate that the favourable results for coarser cement (i.e., the gap-graded binder) reflect improved particle packing structure accompanied by a decrease in porosity and particularly in particle spacing.     

The combined benefits of CPF and RHA in improving the durability of concrete structures

The work presented is a laboratory study of controlled permeability formwork (CPF) applied to concrete where cement was partially replaced (10%, 15% and 20%) with Portuguese rice husk ash (RHA). Portuguese rice husk is a by-product which may be incinerated industrially. Various tests were carried out to evaluate the durability of concrete made with RHA at 10%, 15% and 20% replacement of cement by weight and cast with both the usual formwork and CPF. Tests carried out so far, reported in this paper, concern strength, absorption by capillarity and chloride ion penetration. Results lead to the conclusion that CPF enhances concrete performance even further when using partial cement replacement by RHA.     

An application of blended fly ash and residual rice husk ash for producing green building bricks

The present study investigates the possibility of using a blended class-F fly ash (FA) and residual rice husk ash (RHA) in the production of green building bricks through the application of densified mixture design algorithm (DMDA) in order to provide a new use for solid waste materials. This study uses unground rice husk ash (URHA) as a partial fine aggregate substitution (10–40%) in the studied cementitious mixtures. Solid bricks of 220 × 105 × 60 mm in size were prepared under forming pressure of 25–35 MPa, a curing temperature of 90 °C, and a relative humidity of 50%, for tests that assessed: compressive strength, flexural strength, bulk density, void volume, and water absorption. The test results showed that all brick samples demonstrated excellent properties. Compressive strength and flexural strength ranged, respectively, between 20.2–33 MPa and 5.4–6.9 MPa. Additionally, up to 30% of URHA content, the values of water absorption and void volume ranged, respectively, between 8.8–15.7% and 1.5–2.1%. All of these values not only conformed well to the requirements of the Vietnamese codes but also demonstrated great potential for using a blended FA–RHA in producing green building bricks.     

Influence of 15 and 80 nano-SiO2 particles addition on mechanical and physical properties of ternary blended concrete incorporating rice husk ash

This study demonstrates the effects of SiO₂ nanoparticles as additives with two different sizes of 15 and 80?nm on compressive strength and porosity of rice husk ash (RHA) blended concrete. Up to 20% of ordinary Portland cement (OPC) was replaced by RHA with average particle size of 5 micron. Also, SiO₂ nanoparticles were added to the above mixture at four different weight percentages of 0.5, 1.0, 1.5 and 2.0 and cured in lime solution. The results indicated that compressive strength of Portland cement–nano SiO₂–rice husk ash (PC–NS–RHA) ternary blended concrete was considerably increased. Moreover, the total amount of porosity decreased to a minimum with respect to the control concrete. This improvement was observed at all the curing ages and replacement levels, but there was a gain in the optimal point with 20% of RHA plus 2% of 80?nm SiO₂ particles at 90 days of curing.     

Assessing the effect of biomass ashes with different finenesses on the compressive strength of blended cement paste

This study assesses the effect of biomass ashes with different finenesses on the compressive strength of blended cement paste. rice husk ash (RHA), palm oil fuel ash (POFA) and river sand (RS) were ground to obtain two finenesses: one was the same size as the cement, and the other was smaller than the cement. Type I Portland cement was replaced by RHA, POFA and RS at 0%, 10%, 20%, 30% and 40% by weight of binder. A water to binder ratio (W/B) of 0.35 was used for all blended cement paste mixes. The percentages of amorphous materials and the compressive strength of the pastes due to the hydration reaction, filler effect and pozzolanic reaction were investigated. The results showed that ground rice husk ash and ground palm oil fuel ash were composed of amorphous silica material. The compressive strength of the pastes due to the hydration reaction decreased with decreasing cement content. The compressive strength of the pastes due to the filler effect increased with increasing cement replacement. The compressive strengths of the pastes due to the pozzolanic reaction were nonlinear and were fit with nonlinear isotherms that increased with increasing fineness of RHA and POFA, cement replacement rate and age of the paste. In addition, the model that was proposed to predict the percentage compressive strength of the blended cement pastes on the basis of the age of the paste and the percentage replacement with biomass ash was in good agreement with the experimental results. The optimum replacement level of rice husk ash and palm oil fuel ash in pastes was 30% by weight of binder; this replacement percentage resulted in good compressive strengths.     

Use of rice husk ash in sandcrete blocks for masonry units

Different mix proportions of sand, cement and rice husk ash (RHA) were studied for use in sandcrete blocks. Optimum water/(cement+RHA) ratios were determined at different mix proportions. Compressive strengths of various mix proportions at 7, 28 and 60 days were also determined. The optimum water/(cement+RHA) ratio increased with rice husk ash contents. Test results showed that up to 40% RHA could be added as a partial replacement for cement without any significant change in compressive strength at 60 days. Compressive strengths of various mix proportions were compared with British Statutory minimum compressive strengths of bricks for various walls and it was found that sandcrete blocks of 1∶5 mortar mixes with 40% RHA (by weight of cement) could be used in both load and non-load bearing walls.     

Properties of autoclaved aerated concrete incorporating rice husk ash as partial replacement for fine aggregate

This study examines the effects of rice husk ash (RHA) on the physical, mechanical and microstructural properties of autoclaved aerated concrete (AAC) produced at a temperature of 180 °C for 8 h and 18 h. The RHA was used as an aggregate at various replacement ratios. The results demonstrated that RHA substitution for sand reduces compressive strength and unit weight. In terms of the microstructure, the highly reactive silica in RHA strongly affected the tobermorite transformation. At 8 h of autoclaving time, the lath-like and plate-like tobermorite formed in mixtures containing up to 50% RHA was replaced by a glass-like, silica-rich CSH structure at increased replacement ratios. However, extended processing had no significant effect on these properties, which indicates that the substitution of RHA for sand has a tendency to reduce the autoclaving time or autoclaving temperature required.     

Creep analysis of concrete containing rice husk ash

This paper presents an experimental study on the mechanical properties of concrete added with rice husk ash (RHA) as a supplementary cementitious material. The compressive strength, modulus of elasticity and creep were obtained experimentally from specimens with different RHA contents (0%, 10%, 15% and 20% of binder). The results show that the addition of RHA in concrete can improve both the compressive strength and modulus of elasticity and reduce the creep of concrete. The examination of pore micro-structure of hardened concrete using both the mercury intrusion porosimetry and scanning electron microscope techniques demonstrates that RHA particles can react with calcium hydroxide originated from cement hydration to produce additional C-S-H, which can fill voids and large pores and thus reduces the porosity related to capillary pores and voids. In addition, the release of absorbed water, which is retained in the small pores of RHA particles at early days, can improve cement hydration and thus reduce the porosity related to gel pores.     

Water absorption control of ternary blended concrete with nano-SiO2 in presence of rice husk ash

In the current study, the effects of SiO₂ nanoparticles as additive with two different sizes of 15 and 80?nm on water absorption of rice husk ash (RHA) blended concrete have been investigated. Concrete samples were prepared by replacing 10, 15 and 20?wt% of cement with RHA and 0.5, 1.0, 1.5 and 2.0% of cement with SiO₂ nanoparticles followed by curing in lime solution for 7, 28 and 90?days. The results indicated that the resistance to water absorption of Portland cement?Cnano SiO₂?Crice husk ash (PC?CNS?CRHA) ternary blended concrete was considerably improved with respect to the control concrete. This improvement was observed at all curing ages and replacement levels but the optimal point was reached for 20% of RHA incorporating 2% of 80?nm SiO₂ particles at 90?days of curing. Fast formation of C?CS?CH gel in the presence of ultra high active nano-sized SiO₂ and micron level RHA particles together with their high filler effect may result in a continuous cement paste with the lowest weak zones. It has been concluded that the use of novel ternary blended concrete (PC?CNS?CRHA) provides significant reduction in the water absorption of concrete.     

Performance and properties of mortar mixed with nano-CuO and rice husk ash

This paper presents an experimental study on a new mixture scheme of mortar. Unlike most of existing work, the present study investigates nano-CuO (NC), and its combined effects with cement replacement i.e., rice husk ash (RHA) on durability performance, as well as strength and permeability properties of mortars. Comprehensive observations of both the performance and properties improvements on RHA-containing mortar specimens were determined with the addition of NC. To this end, a series of tests for examining the strength both directly (compressive strength) and indirectly (Ultrasonic Pulse Velocity), electrical resistivity, chloride permeability, water absorption and microstructure characteristics (i.e., SEM micrographs, Mercury intrusion porosimetry (MIP) & capillary analyses) of mortar specimens were performed. A relationship between the Rapid chloride permeability test (RCPT) and electrical resistivity was also studied in order to recommend an alternative method for quality control in the presence of RHA and NC. Finally, a mixture scheme which provides relatively satisfactory properties improvement with positive environment credential is suggested.     

Stabilization/solidification of lead-contaminated soil using cement and rice husk ash

This paper presents the findings of a study on solidification/stabilization (S/S) of lead-contaminated soil using ordinary Portland cement (OPC) and rice husk ash (RHA). The effects of varying lead concentrations (in the form of nitrates) in soil samples on the physical properties of their stabilized forms, namely unconfined compressive strength (UCS), setting times of early mixtures and changes in crystalline phases as well as chemical properties such as leachability of lead, pH and alkalinity of leachates are studied. Results have indicated that usage of OPC with RHA as an overall binder system for S/S of lead-contaminated soils is more favorable in reducing the leachability of lead from the treated samples than a binder system with standalone OPC. On the other hand, partial replacement of OPC with RHA in the binder system has reduced the UCS of solidified samples.     

Effects of mineral admixtures on fresh and hardened properties of self-compacting concretes: binary,ternary and quaternary systems

The paper presented herein investigates the effects of using supplementary cementitious materials in binary, ternary, and quaternary blends on the fresh and hardened properties of self-compacting concretes (SCCs). A total of 22 concrete mixtures were designed having a constant water/binder ratio of 0.32 and total binder content of 550 kg/m³. The control mixture contained only portland cement (PC) as the binder while the remaining mixtures incorporated binary, ternary, and quaternary cementitious blends of PC, fly ash (FA), ground granulated blast furnace slag (GGBFS), and silica fume (SF). After mixing, the fresh properties of the concretes were tested for slump flow time, L-box height ratio, V-funnel flow time, setting time, and viscosity. Moreover, compressive strength, ultrasonic pulse velocity, and electrical resistivity of the hardened concretes were measured. Test results have revealed that incorporating the mineral admixtures improved the fresh properties and rheology of the concrete mixtures. The compressive strength and electrical resistivity of the concretes with SF and GGBFS were much higher than those of the control concrete.     

Self compacting concrete from uncontrolled burning of rice husk and blended fine aggregate

This paper presents an experimental study on the development of normal strength Self compacting concrete (SCC) from uncontrolled burning of rice husk ash (RHA) as a partial replacement to cement and blended fine aggregate whilst maintaining satisfactory properties of SCC. Experiments on the fresh and hardened state properties have been carried out on RHA based SCC from uncontrolled burning. The dosages of RHA are limited to 0%, 20%, 30% and 40% by mass of the total cementitious material in the concrete. The experiments on fresh state properties investigate the filling ability, the passing ability and the segregation resistance of concrete. The experiments on hardened state properties investigate the compressive and the splitting tensile strengths. The water absorption level of the concrete with changing RHA levels has also been monitored. The experimental studies indicate that RHA based SCC developed from uncontrolled burning has a significant potential for use when normal strength is desired.     

低温稻壳灰可控制备及复合水泥研究

采用可控式低温稻壳灰制备装置研究了各种因素对稻壳灰产品的影响;X射线及SEM表征表明,制得的低温稻壳灰为无定形态,且颗粒粒度范围为50～100nm.将低温稻壳灰作为水泥掺合料,与硅灰和粉煤灰对比得到:低温稻壳灰对混凝土强度具有明显的提高效用;当水灰比一定,低温稻壳灰掺入量小于20%(质量分数)时,硅灰与稻壳灰的增强效果相近,可以用稻壳灰代替硅灰.     

Hardened properties of self-consolidating high performance concrete including rice husk ash

This paper mainly presents the key hardened properties of self-consolidating high performance concrete (SCHPC). Various SCHPCs were produced with different water/binder (W/B) ratios, rice husk ash (RHA) contents, and air contents. The required filling ability and air content were achieved in all freshly mixed SCHPCs. The hardened SCHPCs were tested for compressive strength, ultrasonic pulse velocity, water absorption, total porosity, and true electrical resistivity. The effects of W/B ratio, RHA content, and air content on these hardened properties were observed. Test results revealed that the compressive strength, ultrasonic pulse velocity, and electrical resistivity increased whereas the water absorption and total porosity decreased with lower W/B ratio and higher RHA content. In addition, the air content decreased the compressive strength, ultrasonic pulse velocity, water absorption, and total porosity but increased the electrical resistivity. Based on the overall effects of rice husk ash, the optimum RHA content for SCHPC has been defined.     

Influence of curing time on the chloride penetration resistance of concrete containing rice husk ash: A technical and economical feasibility study

This study investigates the influence of the curing time on the chloride penetration behavior of concrete produced with different concentrations of rice husk ash. Compressive strength and chloride penetration at 91 days were assessed according to ASTM C1202. Concentrations of 10%, 20% and 30% of rice husk ash were used and the results were compared with a reference mix with 100% Portland cement and with two other binary mixes with 35% fly ash and 50% ground blast furnace slag. Increases in rice husk ash content produced lower Coulomb charge values. Longer curing times reduced Coulomb charges values for all mixes investigated. However, the extent of the effect of curing times on compressive strength and chloride penetration in concrete is related to the type of mineral addition, the concentration of the substitutions used, the w/b ratio and the curing time used. This behavior points at an optimal curing period for each type of binder to meet specific technical and economical criteria, namely durability and compressive strength specifications for the structure.     

X-ray diffraction analysis of silicon prepared from rice husk ash

Polycrystalline silicon has been prepared by metallothermal reduction of rice husk ash, which contains a considerable amount of amorphous silica. Acid-leached rice husk was burnt at a temperature of 620° C to obtain rice husk ash (RHA). RHA was then reduced with magnesium and major impurities were minimized or removed by an acid leaching process. The end-product was analysed using X-ray diffraction and mass spectrometric techniques. It was found that the powdered silicon obtained from magnesium reduction of RHA had a very low impurity concentration indicating that rice husk, which is an agricultural waste, is a potential source of metallurgical and solar-grade silicon.