横向布置单桩潮流能水轮机的数值模拟研究

文章以单桩潮流能水轮机为研究对象,通过数值计算的方法对横向布置下两台单桩潮流能水轮机的尾流场及机组性能进行研究。通过对比不同横向间距下单桩潮流能水轮机的尾流场,获得了横向间距对潮流能水轮机尾流场的影响规律。数值计算结果表明:单桩结构会改变水轮机的纵向尾流场,但对横向尾流场的影响较小;随着横向间距的改变,机组的功率系数和推力系数的变化幅值不超过0.01;横向间距对机组的横向尾流场也造成了影响,导致各个机组的尾流中心偏向两个机组的中间位置,且随着横向间距的增大,机组u/U0低于0.9的范围随之增大,幅值可达0.26D。     

Tidal farm analysis using an analytical model for the flow velocity prediction in the wake of a tidal turbine with small diameter to depth ratio

A tidal turbine is a device converting hydrodynamic power into electrical power. Lately, more and more projects have been developed in order to optimize the productivity of this kind of energy. In such research with industrial interest, under the impact of the wake effect on the output power, the analysis of a tidal farm layout is regarded as the first priority. Simple approaches such as those developed for wind farms could be used in tidal turbine arrangement optimization. These methodologies can be improved by taking into account the turbulence in tidal farms and tidal turbines' mechanical characteristics. The goal of this work is to propose a predictive analytical model to estimate the tidal speed in the far wake of tidal turbines with small diameter to depth ratio (20% here). It is a first step prior to integrate the wake model in a tidal farm layout optimization algorithm. The wake model development is achieved reanalyzing the far wake's equations used in wind farm applications. A turbine represented by an Actuator Disc (AD) in conjunction with a Computational Fluid Dynamics (CFD) numerical model is used as a reference for this purpose. The CFD-AD model has been validated with experimental results from literature. The novelty of the present work consists in expressing the far wake's radius expansion as a function of the ambient turbulence and the thrust coefficient. The proposed equation is used in conjunction with the Jensen's model in a manner that the velocities downstream a tidal turbine can be estimated. The velocity distribution in the far wake of a single turbine obtained by the proposed model is in good agreement with the CFD numerical model. As a matter of fact, the model provides satisfactory accuracy in the cases of two parks: one with five aligned turbines and one with ten staggered turbines.     

An experimental investigation on the effect of individual turbine control on wind farm dynamics

Individual wind turbines in a wind farm typically operate to maximize their performance with no consideration of the impact of wake effects on downstream turbines. There is potential to increase power and reduce structural loads within a wind farm by properly coordinating the turbines. To effectively design and analyze coordinated wind turbine controllers requires control‐oriented turbine wake models of sufficient accuracy. This paper focuses on constructing such a model from experiments. The experiments were conducted to better understand the wake interaction and impact on voltage production in a three‐turbine array. The upstream turbine operating condition was modulated in time, and the dynamic impact on the downstream turbine was recorded through the voltage output time signal. The flow dynamics observed in the experiments were used to improve a static wake model often used in the literature for wind farm control. These experiments were performed in the atmospheric boundary layer wind tunnel at the Saint Anthony Falls Laboratory at the University of Minnesota using particle image velocimetry for flow field analysis and turbine voltage modulation to capture the physical evolution in addition to the dynamics of turbine wake interactions. Copyright © 2015 John Wiley & Sons, Ltd.     

水平轴风力机组风场全局优化策略研究

为优化风场布置,减小上游风力机尾迹影响,以实现风场全局优化,基于致动线方法,利用OpenFOAM(多物理场运行与操作开源软件)对风力机组风场进行了15种风轮俯仰工况及9种错排布置的数值模拟,比较各优化策略下的风场总输出功率,并结合流场细微结构参数分布,分析不同优化方法对风场全局影响的流动机理。结果表明:尾迹对风场下游风力机影响严重。两种数值模拟优化方法均可实现风场全局优化,其中风轮俯仰优化策略可使风场总输出功率最大提高34.5%;风力机组错排布置可提高68.5%。此外,风场上游风力机功率在风轮俯仰时下降明显,风力机组错排时几乎无变化。     

Investigation of wind turbine wake superposition models using Reynolds‐averaged Navier‐Stokes simulations

It is well accepted that the wakes created by upstream turbines significantly impact on the power production and fatigue loading of downstream turbines and that this phenomenon affects wind farm performance. Improving the understanding of wake effects and overall efficiency is critical for the optimisation of layout and operation of increasingly large wind farms. In the present work, the NREL 5‐MW reference turbine was simulated using blade element embedded Reynolds‐averaged Navier‐Stokes computations in sheared onset flow at three spatial configurations of two turbines at and above rated flow speed to evaluate the effects of wakes on turbine performance and subsequent wake development. Wake recovery downstream of the rearward turbine was enhanced due to the increased turbulence intensity in the wake, although in cases where the downstream turbine was laterally offset from the upstream turbine this resulted in relatively slower recovery. Three widely used wake superposition models were evaluated and compared with the simulated flow‐field data. It was found that when the freestream hub‐height flow speed was at the rated flow speed, the best performing wake superposition model varied depending according to the turbine array layout. However, above rated flow speed where the wake recovery distance is reduced, it was found that linear superposition of single turbine velocity deficits was the best performing model for all three spatial layouts studied.     

The helix approach: Using dynamic individual pitch control to enhance wake mixing in wind farms

Wind farm control using dynamic concepts is a research topic that is receiving an increasing amount of interest. The main concept of this approach is that dynamic variations of the wind turbine control settings lead to higher wake turbulence, and subsequently faster wake recovery due to increased mixing. As a result, downstream turbines experience higher wind speeds, thus increasing their energy capture. In dynamic induction control (DIC), the magnitude of the thrust force of an upstream turbine is varied. Although very effective, this approach also leads to increased power and thrust variations, negatively impacting energy quality and fatigue loading. In this paper, a novel approach for the dynamic control of wind turbines in a wind farm is proposed: using individual pitch control, the fixed‐frame tilt and yaw moments on the turbine are varied, thus dynamically manipulating the wake. This strategy is named the helix approach because the resulting wake has a helical shape. Large eddy simulations of a two‐turbine wind farm show that this approach leads to enhanced wake mixing with minimal power and thrust variations.     

格尼襟翼垂直轴风力机风场研究

为研究垂直轴风力机风场中机组气动性能受格尼襟翼的影响,采用TSST湍流模型对直线翼垂直轴风力机进行数值模拟研究.结果表明:风场上游风力机组尖速比越大,机组间流体加速效果越显著,使风力机组气动性能高于单风力机;在中低尖速比时,格尼襟翼可有效提升单个风力机气动效率,在尖速比较高时,提升效果并不明显;在风力机组中安装格尼襟翼...     

Simulation comparison of wake mitigation control strategies for a two‐turbine case

Wind turbines arranged in a wind plant impact each other through their wakes. Wind plant control is an active research field that attempts to improve wind plant performance by coordinating control of individual turbines to take into account these turbine–wake interactions. In this paper, high‐fidelity simulations of a two‐turbine fully waked scenario are used to investigate several wake mitigation strategies, including modification of yaw and tilt angles of an upstream turbine to induce wake skew, as well as repositioning of the downstream turbine. The simulation results are compared through change relative to a baseline operation in terms of overall power capture and loading on the upstream and downstream turbine. Results demonstrated improved power production for all methods. Analysis of control options, including individual pitch control, shows potential to minimize the increase of, or even reduce, turbine loads.Copyright © 2014 John Wiley & Sons, Ltd.     

Wind tunnel investigation on the effect of the turbine tower on wind turbines wake symmetry

In wind farms, the wake of the upstream turbines becomes the inflow for the downstream machines. Ideally, the turbine wake is a stable vortex system. In reality, because of factors like background turbulence, mean flow shear, and tower‐wake interaction, the wake velocity deficit is not symmetric and is displaced away from its mean position. The irregular velocity profile leads to a decreased efficiency and increased blade stress levels for the downstream turbines. The object of this work is the experimental investigation of the effect of the wind turbine tower on the symmetry and displacement of the wake velocity deficit induced by one and two in‐line model wind turbines (,D= 0.9 m). The results of the experiments, performed in the closed‐loop wind tunnel of the Norwegian University of Science and Technology in Trondheim (Norway), showed that the wake of the single turbine expanded more in the horizontal direction (side‐wall normal) than in the vertical (floor normal) direction and that the center of the wake vortex had a tendency to move toward the wind tunnel floor as it was advected downstream from the rotor. The wake of the turbine tandem showed a similar behavior, with a larger degree of non‐symmetry. The analysis of the cross‐stream velocity profiles revealed that the non‐symmetries were caused by a different cross‐stream momentum transport in the top‐tip and bottom‐tip region, induced by the turbine tower wake. In fact, when a second additional turbine tower, mirroring the original one, was installed above the turbine nacelle, the wake recovered its symmetric structure. Copyright © 2017 John Wiley & Sons, Ltd.     

The flow in the induction and entrance regions of lab-scale wind farms

With the increasing demand for wind energy, it is important to be able to understand and predict the available wind resources. To that end, the present wind tunnel study addresses the flow in the induction and entrance region of wind farms through particle image velocimetry, with focus on differences between actuator disks and two-bladed rotating wind turbine models. Both staggered and aligned farm layouts are examined for three different incoming wind directions. For each layout, 69 disks or turbines are used, and the field of view ranges from 12 rotor diameters upstream of the farms to 8 diameters downstream of the first row. The results show that the induction, or blockage effect, is higher for the disks, even though the thrust (or drag) coefficient is the same. In contrast, the wake is stronger downstream of the turbines. The orientation and layout of the farm do not have a major impact on the results. Modal decomposition of the flow shows that the flow structure similarity between the disk and turbines improves downstream of the second row of wake generating objects, indicating that the substitution of wind turbines by actuator disks is more appropriate for wind farms than for the investigation of single wakes.     

An experimental investigation on the wake interferences among wind turbines sited in aligned and staggered wind farms

An experimental investigation was conducted for a better understanding of the wake interferences among wind turbines sited in wind farms with different turbine layout designs. Two different types of inflows were generated in an atmospheric boundary layer wind tunnel to simulate the different incoming surface winds over typical onshore and offshore wind farms. In addition to quantifying the power outputs and dynamic wind loads acting on the model turbines, the characteristics of the wake flows inside the wind farms were also examined quantitatively. After adding turbines staggered between the first 2 rows of an aligned wind farm to increase the turbine number density in the wind farm, the added staggered turbines did not show a significant effect on the aeromechanical performance of the downstream turbines for the offshore case. However, for the onshore case, while the upstream staggered turbines have a beneficial effect on the power outputs of the downstream turbines, the fatigue loads acting on the downstream turbines were also found to increase considerably due to the wake effects induced by the upstream turbines. With the same turbine number density and same inflow characteristics, the wind turbines were found to be able to generate much more power when they are arranged in a staggered layout than those in an aligned layout. In addition, the characteristics of the dynamic wind loads acting on the wind turbines sited in the aligned layout, including the fluctuation amplitudes and power spectrum, were found to be significantly different from those with staggered layout.     

Application of a LES technique to characterize the wake deflection of a wind turbine in yaw

When a wind turbine works in yaw, the wake intensity and the power production of the turbine become slightly smaller and a deflection of the wake is induced. Therefore, a good understanding of this effect would allow an active control of the yaw angle of upstream turbines to steer the wake away from downstream machines, reducing its effect on them. In wind farms where interaction between turbines is significant, it is of interest to maximize the power output from the wind farm as a whole and to reduce fatigue loads on downstream turbines due to the increase of turbulence intensity in wakes. A large eddy simulation model with particular wind boundary conditions has been used recently to simulate and characterize the turbulence generated by the presence of a wind turbine and its evolution downstream the machine. The simplified turbine is placed within an environment in which relevant flow properties like wind speed profile, turbulence intensity and the anisotropy of turbulence are found to be similar to the ones of the neutral atmosphere. In this work, the model is used to characterize the wake deflection for a range of yaw angles and thrust coefficients of the turbine. The results are compared with experimental data obtained by other authors with a particle image velocimetry technique from wind tunnel experiments. Also, a comparison with simple analytical correlations is carried out. Copyright © 2009 John Wiley & Sons, Ltd.     

Simulation of wind turbine wake interaction using the vorticity transport model

The aerodynamic interactions that can occur within a wind farm can result in the constituent turbines generating a lower power output than would be possible if each of the turbines were operated in isolation. Tightening of the constraints on the siting of wind farms is likely to increase the scale of the problem in the future. The aerodynamic performance of turbine rotors and the mechanisms that couple the fluid dynamics of multiple rotors can be most readily understood by simplifying the problem and considering the interaction between only two rotors. The aerodynamic interaction between two rotors in both co‐axial and offset configurations has been simulated using the Vorticity Transport Model. The aerodynamic interaction is a function of the tip speed ratio, and both the streamwise and crosswind separation between the rotors. The simulations show that the momentum deficit at a turbine operating within the wake developed by the rotor of a second turbine is governed by the development of instabilities within the wake of the upwind rotor, and the ensuing structure of the wake as it impinges on the downwind rotor. If the wind farm configuration or wind conditions are such that a turbine rotor is subject to partial impingement by the wake produced by an upstream turbine, then significant unsteadiness in the aerodynamic loading on the rotor blades of the downwind turbine can result, and this unsteadiness can have considerable implications for the fatigue life of the blade structure and rotor hub. Copyright © 2009 John Wiley & Sons, Ltd.     

Blockage effects in wind farms

An experimental study of wind farm blockage has been performed to quantify the velocity decrease that the first row of a wind farm experiences due to the presence of the other turbines downstream. The general perception has been that turbines downstream of the first row are only influenced by the wakes from upstream turbines without any upstream effect. In the present study, an attempt is made to demonstrate the existence of a two‐way coupling between individual turbines and turbines in the wind farm. Several staggered layouts were tested in the wind tunnel experiments by changing the spacing between rows, spacing between turbines in the rows, and the amount of wind turbines involved. The experiments focused on turbines located in the center of the first row as well as the two turbines located in the row edges, usually believed to experience a speedup. The present results show that no speedup is present and that all the turbines in the first row are subjected to a reduced wind speed. This phenomenon has been considered to be due to “global blockage.” An empirical correlation formula between spacing, number of rows, and velocity decrease is proposed to quantify such effect for the center turbine as well as for the turbines at the edges.     

水平轴潮流涡轮池壁效应修正方法分析

通过数值仿真与模型试验的方式分析池壁效应对水平轴潮流涡轮水动力性能的影响。通过总结公开发表文献中池壁效应修正方法,获取不同流域以及来流流速下5种池壁效应的修正结果,并与无限流域下水平轴潮流涡轮的能量转换效率以及阻力系数进行对比,进而获得可准确预估无限流域下水平轴潮流涡轮水动力性能的池壁效应修正方法。结果表明：池壁效应会对潮流涡轮的水动力性能产生较为明显的影响,受限流域下潮流涡轮能量转换效率以及阻力系数高于无限流域下的结果,且池壁效应对潮流涡轮的能量转换效率的影响伴随尖速比的增加呈逐渐增大的趋势。受阻塞因子与尖速比的影响,不同池壁效应修正方法的预估精度不同;其中,Pope-Harper以及Bahaj这2种池壁效应修正结果在不同来流流速、阻塞因子以及尖速比下与无限流域下潮流涡轮的水动力性能吻合良好。     

Wake impacts on downstream wind turbine performance and yaw alignment

Aerodynamic wake interaction between commercial scale wind turbines can be a significant source of power losses and increased fatigue loads across a wind farm. Significant research has been dedicated to the study of wind turbine wakes and wake model development. This paper profiles influential wake regions for an onshore wind farm using 6 months of recorded SCADA (supervisory control and data acquisition) data. An average wind velocity deficit of over 30% was observed corresponding to power coefficient losses of 0.2 in the wake region. Wind speed fluctuations are also quantified for an array of turbines, inferring an increase in turbulence within the wake region. A study of yaw data within the array showed turbine nacelle misalignment under a range of downstream wake angles, indicating a characteristic of wind turbine behaviour not generally considered in wake studies. The turbines yaw independently in order to capture the increased wind speeds present due to the lateral influx of turbulent wind, contrary to many experimental and simulation methods found in the literature. Improvements are suggested for wind farm control strategies that may improve farm‐wide power output. Additionally, possible causes for wind farm wake model overestimation of wake losses are proposed.Copyright © 2012 John Wiley & Sons, Ltd.     

Performance analysis of a HAT tidal current turbine and wake flow characteristics

Having very strong current on the west coast with up to 10 m tidal range, there are many suitable sites for the application of tidal current power (TCP) in Korea. The turbine, which initially converts the tidal energy, is an important component because it affects the efficiency of the entire system. To design a turbine that can extract the maximum power on the site, the depth and duration of current velocity with respect to direction should be considered. To extract a significant quantity of power, a tidal current farm with a multi-arrangement is necessary in the ocean. The interactions between devices contribute significantly to the total power capacity. Thus, the study of wake propagation is necessary to understand the evolution of the wake behind a turbine. This paper introduces configuration design of horizontal axis tidal current turbine based on the blade element theory, and evaluating its performance with CFD. The maximum efficiency of the designed turbine was calculated as 40% at a tip speed ratio (TSR) of 5. The target capacity of 300 kW was generated at the design velocity, and the performance was stable over a wide range of rotating speeds. To investigate the wakes behind the turbine, unsteady simulation was carried out. The wake velocity distribution was obtained, and velocity deficit was calculated. A large and rapid recovery was observed from 2D to 8D downstream, followed by a much slower recovery beyond. The velocity was recovered up to 86% at 18D downstream.     

水平轴潮流水轮机转轮尾流特性数值分析

针对潮流水轮机转轮尾流对机组之间水力性能的干扰问题,利用CFD分析软件Fluent对单个水平轴潮流水轮机转轮模型和10倍转轮直径间距下的两台机组模型在额定流速条件下进行三维流场的数值模拟。结果表明,在水轮机转轮旋转平面内不同半径位置处的尾流流速恢复情况明显不同,离旋转轴线越远,尾流流速恢复越快,其流速亏损也越少;当水轮机组之间串列布置,且来流方向与旋转平面垂直情况下,下游机组运行受上游机组转轮的尾流影响较大,应尽量避免该布置方式。     

On the definition of the power coefficient of tidal current turbines and efficiency of tidal current turbine farms

During the last decade, the development of tidal current industries has experienced a rapid growth. Many devices are being prototyped. For various purposes, investors, industries, government and academics are looking to identify the best device in terms of of cost of energy and performance. However, it is difficult to compare the cost of energy of new devices directly because of uncertainties in the operational and capital costs. It may however be possible to compare the power output of different devices by standardizing the definition of power coefficients. In this paper, we derive a formula to quantify the power coefficient of different devices. Specifically, this formula covers ducted devices, and it suggests that the duct shape should be considered. We also propose a procedure to quantify the efficiency of a tidal current turbine farm by using the power output of the farm where no hydrodynamic interaction exists between turbines, which normalizes a given farm's power output. We also show that the maximum efficiency of a farm can be obtained when the hydrodynamic interaction exists.     

A computational hydrodynamics method for horizontal axis turbine – Panel method modeling migration from propulsion to turbine energy

A computational hydrodynamics method was formulated and implemented for horizontal axis tidal turbines. This paper presents a comparative analysis between screw propellers and horizontal axis turbines, in terms of geometry and motion parameters, inflow velocity analysis and the implementation methodologies. Comparison and analysis are given for a marine propeller model and a horizontal axis turbine model that have experimental measurements available in literature. Analysis and comparison are presented in terms of thrust coefficients, shaft torque/power coefficients, blade surface pressure distributions, and downstream velocity profiles. The effect of number of blades from 2 to 5, of a tidal turbine on hydrodynamic efficiency is also obtained and presented. The key implementation techniques and methodologies are provided in detail for the propeller based panel method tool to migrate as a prediction tool for tidal turbine. While the method has been proven to be accurate and robust for many propellers tested in the past, this numerical tool could be validated further for turbines. To further refine and validate the panel method for various turbines, it requires substantial additional experimental measurements. These measurements include downstream velocity profile by using LDV and/or SPIV, which are essential for numerical wake vortices descritization.