Fuzzy TOPSIS approach for assessing thermal-energy storage in concentrated solar power (CSP) systems

The energy produced by thermal solar plants does not have to be limited solely to hours of sunlight. It is possible to conceive a storage system and it is possible to extend the production of heat beyond the hours of full sunshine.     

Robust design of a future 100% renewable european energy supply system with hydrogen infrastructure

Variable renewable energy sources (VRES) will be the cornerstones of future energy supply systems. Nevertheless, their inherent intermittency remains an obstacle to their widespread deployment. Renewably-produced or ‘green’ hydrogen has been suggested as an energy carrier that could account for this in a sustainable manner. In this study, a fully VRES-based European energy system in the year 2050 is designed using an iterative minimal cost-optimization approach that ensures robust supply security across 38 weather-year scenarios (1980–2017). The impact of different power generation locations is factored in by defining exclusive VRES groups within each optimization region. From this, it can be seen that higher numbers of groups in each region offer cheaper electricity generation locations to the optimizer and thus decrease the system's total annual costs. Furthermore, the robust system design and impact of inter-annual variability is identified by iteratively combining the installed capacities of different system designs derived through the application of the 38 historical weather years. The system design outlined here has significantly lower capacities in comparison to the maximum regional capacities obtained in the first round of optimization.     

Potential of renewable hydrogen production for energy supply in Hong Kong

Hong Kong is highly vulnerable to energy and economic security due to the heavy dependence on imported fossil fuels. The combustion of fossil fuels also causes serious environmental pollution. Therefore, it is important to explore the opportunities for clean renewable energy for long-term energy supply. Hong Kong has the potential to develop clean renewable hydrogen energy to improve the environmental performance. This paper reviews the recent development of hydrogen production technologies, followed by an overview of the renewable energy sources and a discussion about potential applications for renewable hydrogen production in Hong Kong. The results show that although renewable energy resources cannot entirely satisfy the energy demand in Hong Kong, solar energy, wind power, and biomass are available renewable sources for significant hydrogen production. A system consisting of wind turbines and photovoltaic (PV) panels coupled with electrolyzers is a promising design to produce hydrogen. Biomass, especially organic waste, offers an economical, environmental-friendly way for renewable hydrogen production. The achievable hydrogen energy output would be as much as 40% of the total energy consumption in transportation.     

Multicriteria renewable energy planning using an integrated fuzzy VIKOR & AHP methodology: The case of Istanbul

The purpose of this study is twofold: first, it is aimed at determining the best renewable energy alternative for Istanbul by using an integrated VIKOR-AHP methodology. Second, a selection among alternative energy production sites in this city is made using the same approach. In the proposed VIKOR-AHP methodology, the weights of the selection criteria are determined by pairwise comparison matrices of AHP. In energy decision making problems, the judgments of decision makers are usually vague. As it is relatively difficult for decision makers to provide exact values for the criteria, the evaluation data for the alternative energy policies should be expressed in linguistic terms. In order to model this kind of uncertainty in human preferences, fuzzy logic is applied very successfully. Thus, both classical VIKOR and classical AHP procedures are performed under fuzzy environment. The originality of the paper comes from the application of the proposed integrated VIKOR-AHP methodology to the selection of the best energy policy and production site. It is found that wind energy is the most appropriate renewable energy option and Çatalca district is the best area among the alternatives for establishing wind turbines in Istanbul.     

Lead-acid battery use in the development of renewable energy systems in China

Policies and laws encouraging the development of renewable energy systems in China have led to rapid progress in the past 2 years, particularly in the solar cell (photovoltaic) industry. The development of the photovoltaic (PV) and wind power markets in China is outlined in this paper, with emphasis on the utilization of lead-acid batteries. The storage battery is a key component of PV/wind power systems, yet many deficiencies remain to be resolved. Some experimental results are presented, along with examples of potential applications of valve regulated lead-acid (VRLA) batteries, both the absorbed glass mat (AGM) and gelled types.     

Reviewing optimisation criteria for energy systems analyses of renewable energy integration

The utilisation of fluctuating renewable energy sources is increasing world-wide; however, so is the concern about how to integrate these resources into the energy systems. The design of optimal energy resource mixes in climate change mitigation actions is a challenge faced in many places. This optimisation may be implemented according to economic objectives or with a focus on techno-operational aims and within these two main groupings, several different criteria may potentially be applied to the design process.In this article, a series of optimisation criteria are reviewed and subsequently applied to an energy system model of Western Denmark in an analysis of how to use heat pumps for the integration of wind power.The analyses demonstrate that the fact whether the system in question is modelled as operated in island mode or not has a large impact on the definition of the optimal wind power level. If energy savings and CO₂ emission reductions beyond the system boundary are not included in the analysis, then it is either not feasible to expand wind power to a high degree or it is conversely more feasible to install relocation technologies that can utilise any excess production. The analyses also demonstrate that different optimisation criteria render different optimal designs.     

Operating conditions of batteries in off-grid renewable energy systems

Operating conditions in off-grid renewable energy systems (RES) vary significantly in different applications and locations. To describe RES and the operating conditions of their components it is useful to define categories of similar operating conditions. Categories can also be used for lifetime considerations of RES components, for making recommendations and for analysing the properties and performance of a RES and its components. Categories support system designers and an economic analysis. This paper describes the process and the results of creating RES categories of similar operating conditions for batteries. Categories are defined in such a way that batteries belonging to the same category are subjected to similar operating conditions and a similar combination of stress factors. The results provide a comprehensive overview of battery operating conditions in existing off-grid renewable energy systems. This work is part of the EU research project Benchmarking.¹     

A novel concept for a renewable network within municipal energy systems

Renewable energy sources are amongst the more widely acceptable options for the future transformations of existing energy systems. The complexities of such transformations call for various comprehensive preparatory actions. Amongst them, the organisation of a multifaceted renewable value-chain into a renewable network may well be crucial for the successful utilisation of renewable energy sources in the future. This paper proposes a novel concept for renewable network covering entire renewable value chain with division on supply, demand and technology sections. In the past, each section has been addressed separately. The organisation of renewable network covering all sections is deemed to be vital for accomplishing the optimal distribution and deployment of renewable energy sources. Constant technological advancements within the renewable sector indicate the significance of a technology section within a renewable network. The appropriate arrangement of various stakeholders involved throughout the entire value-chain, which includes all sections of a renewable network, is therefore crucial for the further development of a renewable sector. The proposed concept of a renewable network would support the effective operation of a renewable value-chain within a municipality through the establishment of local virtual energy cooperatives aimed at fulfilling energy needs and supporting the development of the community. The applicability of the proposed concept is demonstrated through the development of a biomass network within the municipality of Cirkulane, Slovenia.     

A review of computer tools for analysing the integration of renewable energy into various energy systems

This paper includes a review of the different computer tools that can be used to analyse the integration of renewable energy. Initially 68 tools were considered, but 37 were included in the final analysis which was carried out in collaboration with the tool developers or recommended points of contact. The results in this paper provide the information necessary to identify a suitable energy tool for analysing the integration of renewable energy into various energy-systems under different objectives. It is evident from this paper that there is no energy tool that addresses all issues related to integrating renewable energy, but instead the ‘ideal’ energy tool is highly dependent on the specific objectives that must be fulfilled. The typical applications for the 37 tools reviewed (from analysing single-building systems to national energy-systems), combined with numerous other factors such as the energy-sectors considered, technologies accounted for, time parameters used, tool availability, and previous studies, will alter the perception of the ‘ideal’ energy tool. In conclusion, this paper provides the information necessary to direct the decision-maker towards a suitable energy tool for an analysis that must be completed.     

Local wind patterns for modeling renewable energy systems by means of cluster analysis techniques

A method based on cluster analysis techniques is proposed in order to obtain representative local wind patterns. Modeling renewable energy systems, in an accurate way which strongly depends on wind loads, requires reliable data to analyze their response and evaluate their performance. Otherwise poor agreement with the models may be obtained. In a case study for La Paz, Baja California Sur, Mexico, four different wind patterns were obtained from a one-year data set recorded at 10-min intervals.     

The role of district heating in future renewable energy systems

Based on the case of Denmark, this paper analyses the role of district heating in future Renewable Energy Systems. At present, the share of renewable energy is coming close to 20 per cent. From such point of departure, the paper defines a scenario framework in which the Danish system is converted to 100 per cent Renewable Energy Sources (RES) in the year 2060 including reductions in space heating demands by 75 per cent. By use of a detailed energy system analysis of the complete national energy system, the consequences in relation to fuel demand, CO₂ emissions and cost are calculated for various heating options, including district heating as well as individual heat pumps and micro CHPs (Combined Heat and Power). The study includes almost 25 per cent of the Danish building stock, namely those buildings which have individual gas or oil boilers today and could be substituted by district heating or a more efficient individual heat source. In such overall perspective, the best solution will be to combine a gradual expansion of district heating with individual heat pumps in the remaining houses. Such conclusion is valid in the present systems, which are mainly based on fossil fuels, as well as in a potential future system based 100 per cent on renewable energy.     

A comparative analysis for multiattribute selection among renewable energy alternatives using fuzzy axiomatic design and fuzzy analytic hierarchy process

Renewable energy is the energy generated from natural resources such as sunlight, wind, rain, tides and geothermal heat which are renewable. Energy resources are very important in perspective of economics and politics for all countries. Hence, the selection of the best alternative for any country takes an important role for energy investments. Among decision-making methodologies, axiomatic design (AD) and analytic hierarchy process (AHP) are often used in the literature. The fuzzy set theory is a powerful tool to treat the uncertainty in case of incomplete or vague information. In this paper, fuzzy multicriteria decision- making methodologies are suggested for the selection among renewable energy alternatives. The first methodology is based on the AHP which allows the evaluation scores from experts to be linguistic expressions, crisp, or fuzzy numbers, while the second is based on AD principles under fuzziness which evaluates the alternatives under objective or subjective criteria with respect to the functional requirements obtained from experts. The originality of the paper comes from the fuzzy AD application to the selection of the best renewable energy alternative and the comparison with fuzzy AHP. In the application of the proposed methodologies the most appropriate renewable energy alternative is determined for Turkey.     

Feasibility analysis of stand-alone renewable energy supply options for a large hotel

This paper provides a feasibility analysis of renewable energy supply (RES) for a stand-alone supply large-scale tourist operation (with over 100 beds). The analysis utilises the power load data from a hotel located in a subtropical coastal area of Queensland, Australia. The assessment criteria of the analysis are net present cost, renewable factor and payback time. Due to the limited number of RES case studies in tourist operations and the absence of studies for large resorts, requiring facilities with a higher degree of comfort such as air-conditioning, it is not possible to establish with confidence the viability of RES in this industry. The specific operational characteristics of the tourism accommodation sector, such as 24-h operation, comfort provision and low tolerance for failure necessitates a separate assessment of RES viability for this sector, rather than relying on similar assessments from other commercial sectors. This study uses RES assessment software tools, HOMER (National Renewable Energy Laboratory, US) and HYBRIDS (Solaris Homes, Queensland, Australia), in order to compare diesel generator-only, RES-only and RES/diesel hybrid technologies. HOMER uses hourly load data, whilst HYBRIDS uses average daily energy demand for each month. The modelling results demonstrate that RES, in principle, has the potential to adequately and reliably meet power demand for a stand-alone large-scale tourist accommodation. Optimisation modelling demonstrates that 100% of power demand can be supplied by a RES-only configuration. A hybrid diesel/RES configuration provides the lowest NPC result with a resultant RF of 76%. In comparison to the diesel generator-only configuration, NPC is reduced by 50% and Greenhouse Gas (GHG) emissions by 65%. The payback time of the hybrid RES scenario is 4.3 years. Results indicate that wind energy conversion systems (WECS), rather than photovoltaics, are the most economically viable RES for large-scale operations. Large-scale WECS (over 1000 kW) are more efficient and economical than multiple small-scale WECS (0.1–100 kW). Both modelling tools produced similar results, with HYBRIDS producing on average slightly higher NPC results than HOMER. The modelling and resulting data from the analysis indicate that RES is technically feasible and economically viable as a replacement for conventional thermal energy supply for large-scale tourist operations dependent on stand-alone power supplies.     

Potential of renewable energy systems in China

Along with high-speed economic development and increasing energy consumption, the Chinese Government faces a growing pressure to maintain the balance between energy supply and demand. In 2009, China has become both the largest energy consumer and CO₂ emitting country in the world. In this case, the inappropriate energy consumption structure should be changed. As an alternative, a suitable infrastructure for the implementation of renewable energy may serve as a long-term sustainable solution. The perspective of a 100% renewable energy system has been analyzed and discussed in some countries previously. In this process, assessment of domestic renewable energy sources is the first step. Then appropriate methodologies are needed to perform energy system analyses involving the integration of more sustainable strategies. Denmark may serve as an example of how sustainable strategies can be implemented. The Danish system has demonstrated the possibility of converting into a 100% renewable energy system. This paper discusses the perspective of renewable energy in China firstly, and then analyses whether it is suitable to adopt similar methodologies applied in other countries as China approaches a renewable energy system. The conclusion is that China’s domestic renewable energy sources are abundant and show the possibility to cover future energy demand; the methodologies used to analyse a 100% renewable energy system are applicable in China. Therefore, proposing an analysis of a 100% renewable energy system in China is not unreasonable.     

Overview of US patents for energy management of renewable energy systems with hydrogen

The problems of energy shortage, severe pollution, and global warming are becoming increasingly severe. Renewable energy systems with hydrogen have been widely used. In recent years, much literature has described the energy management of renewable energy systems with hydrogen in a comprehensive way. However, most of them are proposed and discussed from an academic point of view. There are likewise several different approaches and ideas in the patents that address the energy management of hydrogen renewable energy systems. Moreover, most patents are oriented toward industrial applications and still need to be reviewed and analyzed. To fill this gap, this paper reviews relevant US patents to find potential and industrial hydrogen applications and energy management strategies in renewable energy systems. The work presented in this paper will provide solutions and guidance in solving energy management problems in renewable energy systems.     

Sustainable application of renewable sources in water pumping systems: Optimized energy system configuration

Eighteen years ago, in Portugal, the expenses in a water supply system associated with energy consumption were quite low. However, with the successive crises of energy fuel and the increase of the energy tariff as well as the water demand, the energy consumption is becoming a larger and a more important part of the total budget of water supply pumping systems. Also, new governmental policies, essentially in developed countries, are trying to implement renewable energies. For these reasons, a case-study in Portugal of a water pumping system was analysed to operate connected to solar and wind energy sources.     

A survey of tourist attitudes to renewable energy supply in Australian hotel accommodation

The results of a survey are presented describing the attitudes of Australian tourists to micro-generation renewable energy supply (RES) for hotel accommodation. The average positive response rate to all questions was above 50%, implying a desire by tourists for environmentally friendly accommodation and renewable energy supply. Tourists indicated that they perceived RES to be reliable and expressed a willingness to cooperate with RES initiatives and possible resultant inconveniences. However, there were mixed opinions with regard to consumer willingness to pay for the product. Of the 49% of respondents who were willing to pay extra for RES, 92% replied they would pay between 1% and 5%. Analysis of the variation in response due to accommodation type revealed a ‘city’ hotel versus ‘eco-resort’ difference. Likewise, a breakdown of responses according to country of origin indicated that Australians had a more positive attitude to RES than overseas visitors, including Japanese and Americans. While no variation in response was detected according to gender, age had a measurable bearing on response, with older guests returning a higher positive response rate. Visual queue questions querying aesthetic opinions and ‘not-in-my-backyard’ (NIMBY) attitude to RES revealed that there was virtually no opposition to photovoltaics. Opinions regarding wind energy conversion systems (WECS) varied with type and location, with rooftop WECS receiving more acceptance than stand-alone varieties. A high level of visual acceptance was shown by respondents for onshore wind farms located close to a tourist accommodation centre, with less enthusiasm for offshore farms. A strong NIMBY attitude to WECS was not observed among Australian or local respondents.     

Novel method for setting up the relay protection of power systems containing renewable energy sources and hydrogen energy storage systems

Integration of renewable energy sources (RES) together with energy storage systems (ESS) changes processes in electric power systems (EPS) significantly. Specifically, rate of change and the lowest values of operating conditions during the emergencies are got influenced. Such changes can cause incorrect actions of relay protection (RP) as it was designed and adjusted with no regard for influence of RES and ESS. Detailed research on processes during the different normal and abnormal modes in both EPS and primary transducers and also in RP devices should be done to take preventive actions. To do this research mathematical modeling based on detailed and authentic models of all elements including RP should be used. HRTSim (which was developed by authors) software for simulating EPS provides the opportunity to create such models of EPS of any size without simplifications and limits. Using of this instrument together with detailed mathematical models of RP which were developed before provided the opportunity to investigate them rigorously in RES-integrated EPS. Settings providing adequate action of RP in certain conditions were performed as a result of this investigation. Fragments of these investigations are performed in this paper. Results of these investigations would be useful for designing new methods and tools of RP adjustment.     

Global warming and renewable energy sources for sustainable development in Turkey

Turkey, with its young population and growing energy demand per person, its fast growing urbanization, and its economic development, has been one of the fast growing power markets of the world for the last two decades. It is expected that the demand for electric energy in Turkey will be 300 billion kWh by the year 2010 and 580 billion kWh by the year 2020. Turkey is heavily dependent on expensive imported energy resources that place a big burden on the economy and air pollution is becoming a great environmental concern in the country. In this regard, renewable energy resources appear to be the one of the most efficient and effective solutions for clean and sustainable energy development in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. This article presents a review of the potential and utilization of the renewable energy sources in Turkey.     

Hydrogen-based systems for integration of renewable energy in power systems: Achievements and perspectives

This paper is a critical review of selected real-world energy storage systems based on hydrogen, ranging from lab-scale systems to full-scale systems in continuous operation. 15 projects are presented with a critical overview of their concept and performance. A review of research related to power electronics, control systems and energy management strategies has been added to integrate the findings with outlooks usually described in separate literature. Results show that while hydrogen energy storage systems are technically feasible, they still require large cost reductions to become commercially attractive. A challenge that affects the cost per unit of energy is the low energy efficiency of some of the system components in real-world operating conditions. Due to losses in the conversion and storage processes, hydrogen energy storage systems lose anywhere between 60 and 85% of the incoming electricity with current technology. However, there are currently very few alternatives for long-term storage of electricity in power systems so the interest in hydrogen for this application remains high from both industry and academia. Additionally, it is expected that the share of intermittent renewable energy in power systems will increase in the coming decades. This could lead to technology development and cost reductions within hydrogen technology if this technology is needed to store excess renewable energy. Results from the reviewed projects indicate that the best solution from a technical viewpoint consists in hybrid systems where hydrogen is combined with short-term energy storage technologies like batteries and supercapacitors. In these hybrid systems the advantages with each storage technology can be fully exploited to maximize efficiency if the system is specifically tailored to the given situation. The disadvantage is that this will obviously increase the complexity and total cost of the energy system. Therefore, control systems and energy management strategies are important factors to achieve optimal results, both in terms of efficiency and cost. By considering the reviewed projects and evaluating operation modes and control systems, new hybrid energy systems could be tailored to fit each situation and to reduce energy losses.