共查询到20条相似文献,搜索用时 812 毫秒
1.
2.
建立了含容差电路故障诊断的数学模型,对正常电压可测容差电路的故障诊断做了具体分析,并对后者采用反投影法做故障定位取得了很好的效果。 相似文献
3.
对于开关电源的调节和保护电路,容差是需要考虑的一个关键因素。统计学表明实际产品特性参数都是服从正态分布的,需要使用蒙特卡罗方法来做容差分析。在文中介绍3种容差分析的方法,并对这3种方法进行相互验证与比对。 相似文献
4.
阐述了一种新的容差条件下基于多目标线性规划理论的模拟电路软故障诊断方法。通过灵敏度分析建立电路测试节点电压增量方程,并以元件参数变化量与标称值的百分比作为故障判据。采用多目标线性规划方法求解测试节点方程组来估算电路中各元件在一定故障情况下的参数变化百分比,将方程组的解与各元件容差范围相比较来定位故障元件。仿真结果表明,该方法兼顾故障元件的定位和故障元件参数变化量的估算,可以有效地实现模拟电路元件参数在一定容差范围内变化条件下的软故障诊断。 相似文献
5.
容差电路软故障检测与定位 总被引:5,自引:0,他引:5
提出了一种基于统计理论与神经网络数据融合、可用于容差模拟电路软故障检测与定位的诊断方法.该方法将故障诊断分两个阶段进行,即故障检测与故障定位.通过监测可测点工作电压,利用所构建的故障阈值函数与故障判据来实现容差电路的故障在线检测.再通过离线测量电路在不同测试频率下输出对输入的增益,利用可测点工作电压与电路增益,运用所提出的数据融合方法及改进的BP算法对电路进行故障定位.模拟诊断结果表明,所提方法不仅可用于硬故障诊断,而且还能实现容差电路的软故障诊断,所需测试节点少,故障检测与定位准确率高. 相似文献
6.
7.
8.
针对容差模拟电路多故障诊断问题,提出了包括故障状态检测、故障粗糙集生成和故障元件定位的分步诊断方法。将有限测点的故障状态检测转化为容差约束下的线性规划问题;推导得到故障特征等式并生成故障粗糙集,证明了在容差条件下的故障特征等式中可选用标称参数电路的节点电压;对故障粗糙集中元件参数的偏差限值进行修正,对修正后的电路进行状态检测,实现故障元件定位,并估算故障参数偏差。仿真实例表明,该方法具有较高的诊断准确度和参数辨识精度。 相似文献
9.
10.
结合单相智能电能表计量电能准确度要求高的特点,建立描述批次单相智能电能表基本误差一致性的模型,提出相应的容差设计优化目标及约束条件。利用整数规划思想,提出一种面向离散型设计变量的容差设计方法。在此基础上,以加工成本作为优化目标、计量误差的变化范围作为约束条件,对某型号单相智能电能表的计量电路进行容差设计优化。通过设置不同的误差变化范围界限值,获得相应的元器件公差等级和成本值。优化结果表明,所提方法在控制误差变化范围的同时,有效地将成本最小化,适用于单相智能电能表计量电路的容差设计。 相似文献
11.
12.
Samuil L. Farchy Elisaveta D. Gadzheva Lyudmila H. Raykovska Todor G. Kouyoumdjiev 《International Journal of Circuit Theory and Applications》1995,23(6):571-585
In this paper a decomposition approach to diagnosis and fault prediction in large analogue and switched capacitor circuits is proposed, reduced to an analysis of the corresponding nullator-norator models at a single test frequency. Algorithms for isolation of faulty nodes and subcircuits are presented. the topological conditions for performing diagnosis of faulty nodes and for identification of faulty elements have been considered. the element tolerance variations and measurement errors have been taken into account. the possibilities of the general-purpose programmes for frequency and worst-case analysis have been used in the practical implementation of diagnosis and fault prediction. Diagnosis of benchmark circuits has been performed and the results of a computer simulation using the programme PSpice are presented. 相似文献
13.
14.
本文提出了一种可以诊断大规模模拟电路的新方法——集团法,它能不经过撕裂直接用于大规模电路,且能迅速缩小可疑故障集范围。本文详述了其诊断原理及诊断步骤,并给出了诊断实例。 相似文献
15.
数模混合电路故障诊断是一个被广泛关注的前沿课题,它面临着许多测试上的难点,解决这个问题意义重大而任务艰巨.由于数模混合电路具备DES的特点,本文采用近来发展的DES理论对数模混合电路进行可测性分析,该法可用一定的算法在计算机上实现;最后对DES理论在电路测试中的应用进行了实例验证.实验表明:该方法可以有效地进行数模混合电路故障诊断. 相似文献
16.
基于混杂系统模型的DC/DC电力电子电路参数辨识 总被引:3,自引:2,他引:3
基于混杂系统理论构建了电力电子电路的混杂系统模型,并基于该模型提出了电力电子电路参数辨识的一种方法,可应用于故障趋势判断和预知维护。文中给出了6种DC/CC电路的混杂系统模型,并以Buck电路的滤波电感、滤波电容及其等效串联电阻的参数辨识为例,通过实验验证了这一方法的有效性。 相似文献
17.
18.
实用线性光电隔离放大电路 总被引:1,自引:0,他引:1
文中提出了两种简单实用的线性光隔离放大电路,可实现模拟信号的不共电传输。文中对它们进行了PSPICE仿真,误差分析及实验研究,并指出电路参数的选择方法。 相似文献
19.
Sudhanshu Maheshwari Bhartendu Chaturvedi 《International Journal of Circuit Theory and Applications》2011,39(4):427-435
In this paper a new circuit topology for realizing second‐order current‐mode quadrature oscillator is proposed. Three additional circuits are further derived from it, thus resulting in four distinct circuits. Each circuit employs three differential voltage current conveyors and all grounded passive components, ideal for IC implementation. All the circuits possess high output impedance. The circuits exhibit non‐interactive frequency control and low THD. The effects of non‐idealities are also analyzed. PSPICE simulations using 0.5 µCMOS parameters confirm the validity and practical utility of the proposed circuits. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
20.
M. Tadeusiewicz S. Hagas 《International Journal of Circuit Theory and Applications》2006,34(6):607-615
The paper deals with multiple fault diagnosis of analogue AC or DC circuits with limited accessible terminals for excitation and measurement and brings an algorithm for identificating faulty elements and evaluating their parameters. The main achievement is a method enabling us to efficiently identify faulty elements. For this purpose some testing equations are derived playing a key role in identification of possibly faulty elements which are next verified using a test of acceptance. The proposed approach is described in detail for double fault diagnosis. Also extension to triple fault diagnosis is given. Although the method pertains to linear circuits, some aspects of multiple fault diagnosis of non‐linear circuits can be also performed using the small signal approach. Two numerical examples illustrate the proposed method and show its efficiency. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献