EFFECT OF TOOL WEAR AND TOOL SETTING ON PROFILE ACCURACY OF DIAMOND-TURNED NONFERROUS COMPONENTS

Diamond turning technology has gained great importance in high-precision optical component fabrication. The quality of machined optical surfaces is mainly affected by the machine tool's accuracy, cutting tool's quality, and dynamic machining effects. This study investigated the effects of cutting tool conditions and tool set-up error on the surface distortion. Controlled cutting tests were performed on a two-axis diamond turning machine. Spherical mirrors with preset tool offset values and tool height values were turned. The relationship among machined form accuracy, tool offset, and tool height was investigated based on experimental and analytical results. The influence of tool wear on machined surface quality was studied. Factors governing uneven wear along the cutting edge in contour machining were analyzed. A spherical surface with a form accuracy better than λ/10 was produced. Methods for minimizing the effect of tool wear are also discussed.     

High-feed turning of AISI D2 tool steel using multi-radii tool inserts: Tool life,material removed,and workpiece surface integrity evaluation

Multi-radii tool inserts offer novel configuration that comprises of multiple radii at tool nose. A review of the available literature indicates that there exists a need for experimental investigation on certain key machining characteristics of such tools. This paper reports on tool wear/life, material removed, and workpiece surface roughness when multi-radii mixed alumina TiN coated tool inserts are employed for turning D2 steel. Inserts of three different nose radii (0.40, 0.80, 1.20?mm) at six levels of feed rates (ranging from 0.157 to 0.562?mm/rev) are used. Results show that flank wear is the dominant wear mode with catastrophic tool failure occurring at highest nose radius (1.20?mm) and feed rate (0.562?mm/rev) combination. Also, there is ～59% reduction in tool life accompanied by ～62% increase in quantity of material removed as the feed rate increases from 0.157 to 0.562?mm/rev at maximum nose radius (1.20?mm). Feed rate is found to be statistically significant factor for all three responses considered herein at 95% confidence level. Surface integrity assessment at maximum feed rate reveals presence of a strain hardened layer extending to the depth of 150?µm below the machined surface without any observance of white layer for all the tool conditions and nose radius.     

Prediction of cutting force based on machining parameters on AL7075-T6 aluminum alloy by response surface methodology in end milling

Cutting forces modeling is the basic to understand the cutting process, which should be kept in minimum to reduce tool deflection, vibration, tool wear and optimize the process parameters in order to obtain a high quality product within minimum machining time. In this paper a statistical model has been developed to predict cutting force in terms of geometrical parameters such as rake angle, nose radius of cutting tool and machining parameters such as cutting speed, cutting feed and axial depth of cut. Response surface methodology experimental design was employed for conducting experiments. The work piece material is Aluminum (Al 7075-T6) and the tool used is high speed steel end mill cutter with different tool geometry. The cutting forces are measured using three axis milling tool dynamometer. The second order mathematical model in terms of machining parameters is developed for predicting cutting forces. The adequacy of the model is checked by employing ANOVA. The direct effect of the process parameter with cutting forces are analyzed, which helps to select process parameter in order to keep cutting forces minimum, which ensures the stability of end milling process. The study observed that feed rate has the highest statistical and physical influence on cutting force.     

Investigating the Tool Life, Cutting Force Components, and Surface Roughness of AISI 302 Stainless Steel Material Under Oblique Machining

The aim of this work is to investigate the machinability of austenitic AISI 302 stainless steel under oblique cutting. This can be achieved by studying the cutting forces, analysis of tool life, and investigation of the surface roughness at different cutting conditions and nose radius. A factorial experiment and analysis of variance technique are used in which several factors are evaluated for their effects on each level. The machinability experiments are based on design of experiments to obtain empirical equations for machinability values for machining conditions such as speed, feed, depth of cut, and nose radius. The parameters considered in the experiments were optimized to attain maximum tool life using a response graph and a response table. Based on the response models, dual response contours (tool life and surface roughness as a response and metal removal rate) have been plotted in cutting speed-feed planes. Evaluating the effect of the predominant variables influencing the value of tool life is very important for improving the machined product quality.     

Experimental Study of the Tool Wear During the Electrochemical Discharge Machining

Electrochemical discharge machining is a nonconventional machining method which can be used to machine nonconductive materials such as glass and ceramics. However, machining of the refractory materials such as ceramics requires high voltages to produce the required thermal energy. In this condition, the tool wear would be increased significantly. This paper reports the study of the wear of the different tool materials. The selected tool materials have different melting/boiling temperatures responding to the high voltages in different ways. The possibility of using different tool materials in high voltages along with estimation of tool surface temperature is discussed in this paper.     

Effect of Electrode Size on the Performances of Micro-EDM

Understanding the effect of processing parameters on the tool electrode wear during micro-electrical discharge machining (micro-EDM) is helpful to predict and compensate the electrode wear, so as to improve the machining precision. In this paper, experiments are carried out and the influences of tool electrode diameter on the micro-EDM process are discussed based on the skin effect and area effect. It is demonstrated that the machining speed, tool wear, and taper rate are different with the increase of tool electrode diameter. Due to the skin effect and area effect, larger electrode diameter results in higher material removal rate along with higher tool wear rate. The electrode material removal increment is more than the workpiece material removal increment with the increase of tool electrode diameter, which leads to the increase of relative tool wear ratio. Discharge energy is concentrated on the tool surface which enhances the possibility of discharge on the side face and the corner of the tool electrode during the micro-EDM, especially when drilling with a larger tool electrode. As a result, a tool electrode with larger diameter results in a higher taper rate.     

Experimental investigation of IN725 under different cooling environments using new tool holder

Heat buildup is an important issue on the cutting edge which then promotes high-temperature wear which consequently leads to poor machinability during dry machining. To improve the machinability, new tool holder designs accommodating cooling techniques have paid considerable attention toward the manufacturing domain recently. Whereas, in this paper, a new tool holder is designed and fabricated to serve for multipurpose cooling arrangements (internal cooling, external cooling) to reduce the heat buildup of the cutting edge along with the consolidated air system to clear away the chips. Initially, need of new tool holder is discussed followed by its manufacturability and machinability characteristics to a machine for nickel alloy Inconel 725. Machinability studies then are compared for dry machining, internal and external wet machining, and tool wear results are discussed. Thus, improvement in tool wear of around 70–75% and 65–72% is observed for internal wet, external wet concerning dry machining, respectively. Whereas, 15–18% (flank wear) and 6–9% (nose wear) improvement are seen for internal wet machining when compared with external wet machining. Results are best understood for internal cooling using a new tool holder.     

Nose radius and cutting speed effects during milling of AISI 304 material

Not only milling parameters, but also cutting tool properties affect the machining performance. Therefore, in the current work, the effect of nose radius and cutting speed on the wear, force, surface roughness and chip morphology in down and up milling of AISI 304 stainless steel was investigated. Machining experiments were conducted with cutting tools with radii of 0.4, 0.8 and 1.2?mm at various cutting speeds in both down and up milling. Experimental results showed that the main tool failure mechanisms and modes were adhesion, abrasion, chipping and fracture during milling with various nose radii. Cutting forces dropped with the increment in nose radius regardless of the cutting speed and milling direction, except for up milling at 100?m/min. From the experimental results, it was found that roughness diminished with increase in both nose radius and speed. Surface roughness and the resultant forces during up milling were found to be lower than that during down milling. It was observed that the increment in nose radius increased the edge serration in chip morphology.     

On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel

The present research work has been undertaken with a view to investigate the influence of CVD multilayer coated (TiN/TiCN/Al₂O₃/ZrCN) and cutting speed on various machining characteristics such as chip morphology, tool wear, cutting temperature, and machined surface roughness during dry turning of 17-4 PH stainless steel. In order to understand the effectiveness of CVD multilayer coated tool a comparison has been carried out with that of uncoated carbide insert. The surface roughness and cutting temperature obtained during machining with chemical vapor deposition (CVD) multilayer coated tool was higher than that of uncoated carbide insert at all cutting velocity. However, the results clearly indicated that CVD multilayer coated tool played a significant role in restricting various modes of tool failure and reducing chip deformation compared to its uncoated counterpart. Adhesion and abrasion were found to be dominating wear mechanism with flank wear, plastic deformation, and catastrophic failure being major tool wear modes.     

Precision Deterministic Machining of Polymethyl Methacrylate by Single-Point Diamond Turning

Polymethyl methacrylate (PMMA) is widely used as substrate material for optical fabrication in infrared and visual applications. The single-point diamond turning (SPDT) being one of the deterministic precision machining technologies needs to be explored for the manufacturing of the optical components as it is capable of providing the required characteristics such as accuracy, quality, and repeatability. Therefore, it becomes imperative to study the role of influential factors in affecting the machining characteristics of PMMA. The present work is an experimental outcome of precision deterministic machining of PMMA with SPDT. The five input factors of depth of cut, tool overhang, tool nose radius, rotational speed of spindle, and cutting feed rate are considered for machining a flat profile. Surface roughness (Ra), waviness error (Wa), and profile error (Pt) are three output parameters. The process is optimized individually for Ra, Wa, and Pt by Taguchi method. Subsequently, Ra, Wa, and Pt are optimized simultaneously by grey relation to obtain an optimal solution which identifies rotational speed of the spindle, depth of cut, and cutting feed rate as significant parameters. Ra as 11.9 nm, Wa as 0.0289 µm, and Pt as 0.285 µm are obtained as minimum values. Effect of coolant on transmission of light is also studied.     

A radius compensation method of barrel tool based on macro variables in five-axis flank machining of sculptured surfaces

Barrel tool radius compensation is very important to improve the five-axis CNC machining precision and efficiency of sculptured surfaces. By combining macro variables and math function of CNC controller, a radius compensation method of barrel tool based on macro variables in five-axis flank machining of sculptured surfaces was presented. The basic principle of barrel tool radius compensation in five-axis flank machining was firstly investigated. For a specific five-axis CNC machine tool with dual rotary tables, a relationship equation between compensated cutter location (CL) data and machine control (MC) data could be derived. A post-processor with the function of five-axis barrel tool radius compensation was then developed by using the C++ language, which could generate the NC programme with macro variables of barrel tool radius compensation. Finally, the NC programme was obtained automatically by the developed post-processor for the aero-engine blade surface machining. The machining process was simulated on the software VERICUT, and machining experiments were also conducted on the five-axis machine tool. Both the simulation and experimental results showed that the proposed method could perform the function of barrel tool radius compensation in the NC programme for five-axis flank machining.     

不同冷却润滑方式对切削SiCP/Al复合材料刀具磨损的影响

为探究不同冷却润滑方式对切削SiC_P/Al复合材料刀具磨损的影响,进行了干切削（Dry）、微量润滑（MQL）、液氮（LN₂）、切削油（Oil）和乳化液（Emulsion）共五种冷却润滑条件下的车削实验,分析了冷却润滑方式对刀具边界磨损、刀具破损和后刀面磨损的影响。结果表明:MQL和LN₂有更佳的流体冲刷效果,可以将脱落的SiC颗粒及时带离切削区,减少边界磨损; Oil和Emulsion冲刷效果较差,会加剧边界磨损。LN₂的使用会增加刀具受到的热应力和机械冲击,积屑瘤发生完全脱落,造成切削过程不平稳,当切削距离达到1 100 m时,刀具发生破损; Oil切削时,严重的边界磨损导致刀尖部位尺寸减小,强度降低,当切削距离达到825 m时发生了刀具破损。MQL良好的润滑渗透性和LN₂有效的冷却效果可以减少后刀面磨损。因此,MQL兼具冷却、润滑和流体冲刷效果,更加适合作为切削SiC_P/Al复合材料的冷却润滑方式。      

Investigation on tool wear and tool life prediction in micro-milling of Ti-6Al-4V

Short tool life and rapid tool wear in micromachining of hard-to-machine materials remain a barrier to the process being economically viable. In this study, standard procedures and conditions set by the ISO for tool life testing in milling were used to analyze the wear of tungsten carbide micro-end-milling tools through slot milling conducted on titanium alloy Ti-6 Al-4 V. Tool wear was characterized by flank wear rate,cutting-edge radius change, and tool volumetric change. The effect of machining parameters, such as cutting speed and feedrate, on tool wear was investigated with reference to surface roughness and geometric accuracy of the finished workpiece. Experimental data indicate different modes of tool wear throughout machining, where nonuniform flank wear and abrasive wear are the dominant wear modes. High cutting speed and low feedrate can reduce the tool wear rate and improve the tool life during micromachining.However, the low feedrate enhances the plowing effect on the cutting zone, resulting in reduced surface quality and leading to burr formation and premature tool failure. This study concludes with a proposal of tool rejection criteria for micro-milling of Ti-6 Al-4 V.     

Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning

In the current study, attempt has been made to investigate the influence of cutting speed (Vc) (51, 84, and 124 m/min) on various machining characteristics like chip morphology, chip thickness ratio, tool wear, surface, and sub-surface integrity during dry turning of Inconel 825. Comparable study was carried out using uncoated and commercially available chemical vapor deposition multilayer coated (TiN/TiCN/Al₂O₃/ZrCN) cemented carbide (ISO P30 grade) insert. Chip morphology consists of chip forms obtained at different cutting conditions. Serrated chips were observed when machining Inconel 825 with both types of tool with more serration in case of uncoated insert. The chip thickness ratio increased as cutting speed was increased. Use of multilayer coated tool also resulted in increase in chip thickness ratio. Rake and flank surfaces were examined with scanning electron microscope and optical microscope. Abrasion, adhesion, and diffusion wears were found to be dominating tool wear mechanism during dry machining of Inconel 825. The beneficial effect of coated tool over its uncoated counterpart was most prominent during machining at high cutting speed (Vc = 124 m/min). The surface and sub-surface integrity obtained with coated tool were superior to that while machining Inconel 825 with uncoated tool.     

FACTORS AFFECTING SURFACE ROUGHNESS IN FINISH TURNING OF GRAY CAST IRON

The objective of this study was to ascertain the effect of tool wear on surface roughness and develop a more thorough understanding of the process variables affecting surface roughness. Experimental data from a finish turning operation on gray cast iron with uncoated tungsten carbide tools was used to develop a model for surface roughness as a function of cutting speed, feed rate, nose radius of the tool and the amount of wear on the tool. The experiment was statistically designed to minimize the number of runs. Tool wear was treated as a variable notwithstanding the fact that it is one of the responses of the process. The results showed that surface roughness is significantly affected by tool wear and the interactions between tool wear and other variables like cutting speed, feed rate and nose radius. The results also provide better insight into the problem of “adaptive” process control for finish turning operations.     

Comparative Wear Behavior of Ceramic and Carbide Tools During High Speed Machining of Steel

Two types of oxide-based ceramic cutting tools have been developed for high speed machining of hardened steel. These tools were made of alumina (A1₂O₃) and zirconia toughened alumina (ZTA). Commercially available tungsten carbide (WC)-based tools were also used during machining for comparison. In general, ceramic tools exhibited superior performance as compared to the WC tools, especially at higher machining speeds, both in terms of tool life and surface finish of the work-piece. The worn-out tools were observed under a stereo-microscope for studying the role of different wear mechanisms on the tool life. While severe crater wear was observed in the WC tools, only a small amount of edge chipping and nose wear occurred in the ceramic tools during high speed machining. The correlation between the mechanical properties of the tool material, the tool lives and their wear behavior was also studied.     

刀形检测系统及空间测量坐标系的建立

论述一种基于二维视觉的刀形检测及调位系统，给出了测量系统的机械结构以及刀具 原理，分析了系统测量坐标系建立的原理和方法，并给出相关的实验数据。系统的研制实现了高效、精确、自动的刀形检测和位置调整，为高精度数控加工提供了保障。     

Surface finish prediction models for fine turning

Surface finish data were generated for aluminium alloy 390, ductile cast iron, medium carbon leaded steel 10L45, medium carbon alloy steel 4130, and inconel 718 for a wide range of machining conditions defined by cutting speed, feed and tool nose radius. These data were used to develop surface finish prediction models, as a function of cutting speed, feed, and tool nose radius, for each individual metal. A general purpose surface finish prediction model is also proposed for ductile cast iron, medium carbon leaded steel, and alloy steel. Statistical analysis of experimental data indicated that surface finish is strongly influenced by the type of metal, speed and feed of cut, and tool nose radius. While the effects of feed and tool nose radius on surface finish were generally consistent for all materials, the effect of cutting speed was not. The surface finish improved with speed for ductile cast iron, medium carbon leaded steel, medium carbon alloy steel, and aluminium alloy, but it deteriorated with speed for inconel. Apparently, speed effect on surface finish is not always positive. For all metals, the surface finish improved with the tool nose radius while it deteriorated with speed.     

Environment Friendly Machining of Ni–Cr–Co Based Super Alloy using Different Sustainable Techniques

In order to eradicate the use of mineral based cutting fluid, the machining of Ni–Cr–Co based Nimonic 90 alloy was conducted using environment friendly sustainable techniques. In this work, uncoated tungsten carbide inserts were employed for the machining under dry (untreated and cryogenically treated), MQL, and cryogenic cutting modes. The influence of all these techniques was examined by considering tool wear, surface finish, chip contact length, chip thickness, and chip morphology. It was found that the cryogenically treated tools outperformed the untreated tools at 40 m/min. At cutting speed of 80 m/min, MQL and direct cooling with liquid nitrogen brought down the flank wear by 50% in comparison to dry machining. Similarly at higher cutting speed, MQL and cryogenic cooling techniques provided the significant improvement in terms of nose wear, crater wear area, and chip thickness value. However, both dry and MQL modes outperformed the cryogenic cooling machining in terms of surface roughness value at all the cutting speeds. Overall cryotreated tools was able to provide satisfactory results at lower speed (40 m/min). Whereas both MQL and cryogenic cooling methods provided the significantly improved results at higher cutting speeds (60 and 80 m/min) over dry machining.     

表面微/纳米计量中的光学测量方法综述

微纳检测技术旨在以微/纳米级的精度测量加工表面特征,在加工过程的控制、建立表面特征与功能间的联系等方面具有重要作用。光学测量方法具有高精度、快速和无损的特点,是微纳检测技术研发的重要内容。本文介绍了表面形貌和薄膜的光学测量方法,并对各方法的特点及应用场合进行了对比总结。微纳制造技术加工的表面具有结构日益小型化、特征日益复杂化的特点,因此开发多模式测量系统是微纳检测技术的发展趋势。