Polymer electrolytes based on grafted inorganic nanoparticles for dye-sensitized solar cells

Inorganic nanoparticles such as TiO2 and SiO2 were grafted with poly(oxyethylene methacrylate) (POEM) and blended with poly(ethylene glycol) (PEG), 1-methyl-3-propylimidazolium iodide (MPII) and iodine (I2) to prepare polymer electrolytes for dye-sensitized solar cells (DSSC). The effects of the grafted nanoparticles on the coordination interactions and structures of electrolytes were investigated using FT-IR spectroscopy and differential scanning calorimetry (DSC). The energy conversion efficiencies were obtained as 3.3 and 2.9% for TiO2 and SiO2 based electrolytes, respectively. Good interfacial contact between the electrolyte and the electrodes was also confirmed by field emission scanning electron microscopy (FE-SEM).     

Review on development of electrolytes for dye-sensitized solar cells

Since the prototype of a dye-sensitized solar cell(DSSC)was reported in 1991 by M. Gratzel,it has aroused intensive interest over the past decade due to its low cost and simple preparation procedure.The typical cell consists of a dye-coated mesoporous nanocrystalline TiO_2 film sandwiched between two transparent electroldes.A liquid electrolyte,traditionally containing the trioidide/iodide redox couple,fills the pores of the mesoporous nanocrystalline TiO_2 film and contacts the nanoparticles.Photoexcite...     

ZnO nanotube based dye-sensitized solar cells

We introduce high surface area ZnO nanotube photoanodes templated by anodic aluminum oxide for use in dye-sensitized solar cells (DSSCs). Atomic layer deposition is utilized to coat pores conformally, providing a direct path for charge collection over tens of micrometers thickness. Compared to similar ZnO-based devices, ZnO nanotube cells show exceptional photovoltage and fill factors, in addition to power efficiencies up to 1.6%. The novel fabrication technique provides a facile, metal-oxide general route to well-defined DSSC photoanodes.     

Gel polymer electrolytes based on polyacrylonitrile and a novel quaternary ammonium salt for dye-sensitized solar cells

Gel polymer electrolytes were prepared by incorporating polyacrylonitrile (PAN) in a mixture of polysiloxane with quaternary ammonium side groups (PSQAS), ethylene carbonate (EC), propylene carbonate (PC) and iodine. The influence of PAN content on the ionic conductivity of gel polymer electrolytes and the charge-transfer kinetic performance in counterelectrode-electrolyte interface was investigated. The dye-sensitized solar cell with the gel polymer electrolyte containing 5 wt.% PAN showed the best photovoltaic performance; a maximum incident photon conversion efficiency of 63% at 520 nm was obtained, the short-circuit photocurrent density (J_sc), the open-circuit voltage (V_oc) and the fill factor (FF) were 7 mA cm⁻², 0.565 V and 0.65, respectively. The corresponding overall conversion efficiency (η) is 4.3%.     

High performance dye-sensitized solar cells with alkylpyridinium iodide salts in electrolytes

Pyridinium iodide salts, which are competitive to the conventional imidazolium iodide salts, have been used for dye-sensitized solar cells as iodide sources and ionic conductivities. Pyridinium iodide series are easy to prepare and less expensive than the imidazolium series salts. In this research, quite comparable efficiencies were obtained from electrolytes with pyridinium iodide salts. For the experiments, pyridinium salts with a few different alkyl chains are applied. When a pyridinium head is modified to picolinium, which has a methyl group on the pyridinium head, a noticeable V(oc) drop has been observed. However, the length of the alkyl chains on the pyridinium head does not affect V(oc) effectively. The odd-numbered alkyl chains showed slightly lower V(oc) compared to that of the even-numbered alkyl chains. Finally, the performances of the cells with pyridinium salts are compared to those of the conventional cells with imidazolium salts.     

High efficiency dye-sensitized solar cells based on hierarchically structured nanotubes

Dye-sensitized solar cells (DSSCs) based on hierarchically structured TiO(2) nanotubes prepared by a facile combination of two-step electrochemical anodization with a hydrothermal process exhibited remarkable performance. Vertically oriented, smooth TiO(2) nanotube arrays fabricated by a two-step anodic oxidation were subjected to hydrothermal treatment, thereby creating advantageous roughness on the TiO(2) nanotube surface (i.e., forming hierarchically structured nanotube arrays-nanoscopic tubes composed of a large number of nanoparticles on the surface) that led to an increased dye loading. Subsequently, these nanotubes were exploited to produce DSSCs in a backside illumination mode, yielding a significantly high power conversion efficiency, of 7.12%, which was further increased to 7.75% upon exposure to O(2) plasma.     

Nanowire dye-sensitized solar cells

Excitonic solar cells-including organic, hybrid organic-inorganic and dye-sensitized cells (DSCs)-are promising devices for inexpensive, large-scale solar energy conversion. The DSC is currently the most efficient and stable excitonic photocell. Central to this device is a thick nanoparticle film that provides a large surface area for the adsorption of light-harvesting molecules. However, nanoparticle DSCs rely on trap-limited diffusion for electron transport, a slow mechanism that can limit device efficiency, especially at longer wavelengths. Here we introduce a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires. The nanowire anode is synthesized by mild aqueous chemistry and features a surface area up to one-fifth as large as a nanoparticle cell. The direct electrical pathways provided by the nanowires ensure the rapid collection of carriers generated throughout the device, and a full Sun efficiency of 1.5% is demonstrated, limited primarily by the surface area of the nanowire array.     

Solid-state dye-sensitized solar cells based on ordered ZnO nanowire arrays

A solid-state dye-sensitized solar cell (DSC) is fabricated by using arrays of 11-12 μm long, vertically oriented ZnO nanowires as the anode and CuSCN as the solid hole-transport material. The fabricated DSC yields a remarkably higher photocurrent density (J(SC) = 8 mA cm(-2)) compared to previously reported data for solid-state DSCs based on either one-dimensional nanostructures (J(SC) = 0.34 mA cm(-2)) or nanoporous nanocrystalline structures (J(SC) = 4.5 mA cm(-2)) of ZnO. A power conversion efficiency of 1.7% under an irradiation of AM 1.5 G simulated sunlight is reported.     

Intertwined aligned carbon nanotube fiber based dye-sensitized solar cells

Metal wires suffer from corrosion in fiber-shaped dye-sensitized solar cells (DSSCs). We report herein that stable, ultrastrong, and highly flexible aligned carbon nanotube fibers can be used not only as catalytic counter electrodes but also as conductive materials to support dye-loaded TiO(2) nanoparticles in DSSCs. The power conversion efficiency of this fiber solar cell can achieve 2.94%. These solar power fibers, exhibiting power conversion efficiency independent of incident light angle and cell length, can be woven into textiles via a convenient weaving technology.     

TiO2 hollow spheres as effective additives in oligomer electrolytes for dye-sensitized solar cells

TiO₂ hollow spheres are employed as an additive of oligomer electrolytes for dye-sensitized solar cells (DSSCs). The measurement of steady-state currents confirms that introducing TiO₂ hollow spheres can facilitate ionic diffusion in oligomer electrolytes. Even compared with conventional nanoparticle additives, the hollow spheres are more favorable to increase the diffusion coefficients of I^? and I₃^? in oligomer electrolytes. Furthermore, the hollow structure with a submicron size is effective to scatter incident light and thereby enhance the light-harvesting efficiency of DSSCs. The energy-conversion efficiency of the DSSCs with TiO₂ hollow sphere additives significantly improves up to 7.22% due to the facilitated ionic diffusion and the enhanced light-harvesting efficiency.     

Roles of layered titanates in ionic liquid electrolytes for quasi-solid state dye-sensitized solar cells

Quasi-solid state dye-sensitized solar cells(DSSCs) were prepared by using gel-state ionic liquid electrolytes containing layered titanates as gelator. These gelators were prepared by intercalating organic materials into interlayers of layered titanates and then dispersed within ionic liquid electrolytes. As a result, the quasi-solid DSSCs showed the enhancement of current density from 3(mA/cm²) to 4.5(mA/cm²) although the viscosity of electrolytes increased. The improvement of current density is explained by an increase in dissociation of ionic species as well as scattering effect of layered titanates.     

Large area dye-sensitized solar cells with titanium based counter electrode

Construction of dye-sensitized solar cell of large area using platinum sputtered titanium metal counter electrode is demonstrated. An impressive increase in the fill factor and consequently the efficiency compared to the conventional platinized conducting glass based counter electrodes result from very low sheet resistance of the titanium plate and a cell of active area 151 cm² with parallel silver collecting grids delivered an efficiency of 7.4%. The possibility of using this technique for commercial production of dye-sensitized solar cells was discussed giving details of fabrication procedure.     

Quasi-solid-state dye-sensitized solar cells based on TiO2/NiO core-shell nanocomposites

The core-shell nanocomposites of titanium dioxide (TiO2) and nickel oxide (NiO) used as modified photoelectrode materials in a quasi-solid-state dye-sensitized solar cell (quasi-DSSC) were synthesized using TiO2 P-25 and a nickel acetate precursor, via ball milling. The as-obtained intermediate products were annealed at 350, 450, and 550 degrees C. The structural properties of the NiO/TiO2 nanocomposites were well characterized via X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. The results imply that NiO-shell-coated TiO2 nanoparticles can be obtained with the assistance of sufficient thermal energy in the system. The crystallite size of the composite increased as the annealing temperature increased. Among all the prepared conditions, the composite with 0.1 wt% NiO exhibited the best performance, with an optimized solar-energy conversion efficiency of 2.29% and with a short-circuit current density of 7.21 mA/cm2. The significant enhancement of the device's current density may be associated with the charge recombination suppression by the NiO shell, which acted as a potential barrier in the composite. The decrease in the recombination of the photo-injected electrons, and the increase in the number of electrons tunneling through the NiO layer at the interface, may have resulted from the presence of a NiO layer on the TiO2 nanoparticles.     

Highly efficient fibrous dye-sensitized solar cells based on TiO2 nanotube arrays

The structure of fibrous dye-sensitized solar cells, which were constructed by a TiO(2) nanotube array on Ti wire as the photoanode twisted by a Pt wire counter electrode, has been first systematically investigated by accurately controlling the thread pitch distance of screwed Pt wire. It has been revealed that the thread pitch will strongly influence the photovoltaic performance and kinetic processes in fibrous solar cells. The effect of the length of the TiO(2) nanotube on cell performance has also been discussed. After optimization, a relatively universal optimized thread pitch value of 1 mm for fibrous DSCs has been proved and the light-to-electricity conversion efficiency has been remarkably improved to 5.84%.     

染料敏化TiO2纳米晶太阳能电池的研究

通过改变TiO2 膜热处理温度来研究染料RuL2 (SCN ) 2 敏化TiO2 纳米晶太阳能电池光电性能。得热处理温度对TiO2 膜的质量有很大的影响。染料RuL2 (SCN) 2 的吸收光谱表明 ,染料RuL2 (SCN) 2 在可见光有很宽且强的吸收 ,是一种很理想的敏化剂。用XRD和UV -Vis等手段分别表征了TiO2 膜和染料。     

Nano-TiO2 for dye-sensitized solar cells

Photovoltaics are amongst the most popular renewable energy sources and low-cost solar cell technologies are making progress to the market. Research on dye-sensitized solar cells (DSSCs) usually based on nanocrystalline TiO2 has been extensively pursued, and the number of papers and patents published in this area has grown exponentially over the last ten years. Research efforts have largely focused on the optimization of the dye, but recently the TiO2 nanocrystalline electrode itself has attracted more attention. It has been shown that particle size and shape, crystallinity, surface morphology and chemistry of the TiO2 material are key parameters to be controlled for optimized performance of the solar cell. This article will review the most recent research activities on nanostructured TiO2 for improvement of the DSSC performance.     

Efficient dye-sensitized solar cells based on the combination of ZnO nanorods and microflowers

Well-aligned ZnO nanorod films were grown onto transparent conducting substrates by using an aqueous solution route. The presence of some reflections in the X-ray diffraction pattern of the ZnO films indicates the vertical alignment of the nanorods along the c axis of the wurtzite hexagonal structure. Well-aligned ZnO nanorods were observed by scanning electron microscopy. The presence of top ZnO microflower layers over the ZnO nanorod film was observed for all growth times studied. The ZnO nanorods with ZnO microflower top layers were applied as photoelectrodes in dye-sensitized solar cells. Higher photocurrent densities and photovoltages were observed with longer nanorod growth times. The high performance of the dye-sensitized solar cells might be associated to the combination of ZnO nanorods and microflowers in the same photoelectrode.     

All-solid,flexible solar textiles based on dye-sensitized solar cells with ZnO nanorod arrays on stainless steel wires

An all-solid, flexible solar textile fabricated with dye-sensitized solar cells (DSSCs) woven into a satin structure and transparent poly(ethylene terephthalate) (PET) film was demonstrated. A ZnO nanorod (NR) vertically grown from fiber-type conductive stainless steel (SS) wire was utilized as a photoelectrode, and a Pt-coated SS wire was used as a counter electrode. A graft copolymer, i.e. poly(vinyl chloride)-graft-poly(oxyethylene methacrylate) (PVC-g-POEM) was synthesized via atom transfer radical polymerization (ATRP) and used as a solid electrolyte. The conditions for the growth of ZnO NR and sufficient dye loading were investigated to improve cell performance. The adhesion of PET films to DSSCs resulted in physical stability improvements without cell performance loss. The solar textile with 10 × 10 wires exhibited an energy conversion efficiency of 2.57% with a short circuit current density of 20.2 mA/cm² at 100 mW/cm² illumination, which is the greatest account of an all-solid, ZnO-based flexible solar textile. DSSC textiles with woven structures are applicable to large-area, roll-to-roll processes.