Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods

In this paper, the buckling analysis of laminated composite plates reinforced by single-walled carbon nanotubes (SWCNTs) is carried out using an analytical approach as well as the finite element method. The developed model is based on the classical laminated plate theory (CLPT) and the third-order shear deformation theory for moderately thick laminated plates. The critical buckling loads for the symmetrical layup are determined for different support edges. The Mori-Tanaka method is employed to calculate the effective elastic modulus of composites having aligned oriented straight nanotubes. The effect of the agglomeration of the randomly oriented straight nanotubes on the critical buckling load is also analyzed. The results of analytical solution are compared and verified with the FEM calculations The critical buckling loads obtained by the finite element and the analytical methods for different layup and boundary conditions are in good agreement with each other. In this article, the effects of the carbon nanotubes (CNTs) orientation angle, the edge conditions, and the aspect ratio on the critical buckling load are also demonstrated using both the analytical and finite element methods.     

Thermal buckling behavior of laminated composite plates: a finite-element study

In this paper, the thermal buckling behavior of composite laminated plates under a uniform temperature distribution is studied. A finite element of four nodes and 32 degrees of freedom (DOF), previously developed for the bending and mechanical buckling of laminated composite plates, is extended to investigate the thermal buckling behavior of laminated composite plates. Based upon the classical plate theory, the present finite element is a combination of a linear isoparametric membrane element and a high precision rectangular Hermitian element. The numerical implementation of the present finite element allowed the comparison of the numerical obtained results with results obtained from the literature: 1) with element of the same order, 2) the first order shear deformation theory, 3) the high order shear deformation theory and 4) the three-dimensional solution. It was found that the obtained results were very close to the reference results and the proposed element offers a good convergence speed. Furthermore, a parametrical study was also conducted to investigate the effect of the anisotropy of composite materials on the critical buckling temperature of laminated plates. The study showed that: 1) the critical buckling temperature generally decreases with the increasing of the modulus ratio E _L/E _T and thermal expansion ratio α _T/α _L, and 2) the boundary conditions and the orientation angles significantly affect the critical buckling temperature of laminated plates.     

Spline finite strip analysis of the buckling and vibration of composite prismatic plate structures

A spline finite strip capability is described for predicting the buckling stresses and natural frequencies of vibration of prismatic plate structures which may be of composite laminated construction with arbitrary lay-ups. The plate structures may have general boundary conditions. The capability embraces analyses based on the use of first-order shear deformation plate theory and of classical plate theory, and utilizes substructuring procedures which include the use of superstrips. The theoretical development is not detailed since the present paper reports a very direct extension of a theoretical study developed for the analysis of single plates in an earlier paper in this Journal. A considerable range of buckling and vibration applications is documented and comparison of spline finite strip numerical values of buckling stresses and frequencies is made with results generated using the semi-analytical finite strip method and, in some cases, the finite element method. Buckled and vibrational mode shapes are presented for some applications.     

复合材料加筋板在剪切载荷下的屈曲特性研究

通过对复合材料薄壁加筋板结构进行剪切载荷下的屈曲试验研究,得到结构的屈曲模态、屈曲失稳载荷以及破坏形式,并通过有限元方法对结构的屈曲进行数值分析,分析得到的复合材料薄壁加筋板结构的屈曲模态和试验结果一致,屈曲载荷与试验结果吻合较好.试验还发现复合材料薄壁加筋板结构有较高的后屈曲承载能力,后屈曲过程中由于桁条脱胶会造成屈曲模态的变化.还分析了筋条的连续性对屈曲载荷的影响.     

Thermal buckling analysis of annular FGM plate having variable thickness under thermal load of arbitrary distribution by finite element method

In this paper, a finite element formulation is developed for analyzing the axisymmetric thermal buckling of FGM annular plates of variable thickness subjected to thermal loads generally distributed nonuniformly along the plate radial coordinate. The FGM assumed to be isotropic with material properties graded in the thickness direction according to a simple power-law in terms of the plate thickness coordinate, and has symmetry with respect to the plate midplane. At first, the pre-buckling plane elasticity problem is developed and solved using the finite element method, to determine the distribution of the pre-buckling in-plane forces in terms of the temperature rise distribution. Subsequently, based on Kierchhoff plate theory and using the principle of minimum total potential energy, the weak form of the differential equation governing the plate thermal stability is derived, then by employing the finite element method, the stability equations are solved numerically to evaluate the thermal buckling load factor. Convergence and validation of the presented finite element model are investigated by comparing the numerical results with those available in the literature. Parametric studies are carried out to cover the effects of parameters including thickness-to-radius ratio, taper parameter and boundary conditions on the thermal buckling load factor of the plates.     

Linear and nonlinear buckling analysis of a locally stretched plate

Uniformly stretched thin plates do not buckle unless they are in special boundary conditions. However, buckling commonly occurs around discontinuities, such as cracks, cuts, narrow slits, holes, and different openings, of such plates. This study aims to show that buckling can also occur in thin plates that contain no defect or singularity when the stretching is local. This specific stability problem is analyzed with the finite element method. A brief literature review on stretched plates is presented. Linear and nonlinear buckling stress analyses are conducted for a partially stretched rectangular plate, and various load cases are considered to investigate the influence of the partial loading expanse on the critical tensile buckling load. Results are summarized in iso-stress areas, tables and graphs. Local stretching on one end of the plate induces buckling in the thin plate even without geometrical imperfection.     

Stability and free vibration analysis of thick piezoelectric composite plates using spline finite strip method

In the present study, a spline finite strip with higher-order shear deformation is formulated for stability and free vibration analysis of piezoelectric composite plates. At each knot, the electric potentials on the surfaces and middle plane of each piezoelectric layer are taken as nodal degrees of freedom. However, if a continuous electrode is installed on the surface of the layer, the electric potential on the electrode is changed to structural degree of freedom, so that the equipotential condition on the electrode is automatically satisfied. The analysis can be conducted based on Reddy's third-order shear deformation theory, Touratier's “Sine” model, Afaq's exponential model or Cho's higher-order zigzag laminate theory. Consequently, the shear correction coefficients are not required in the analysis, and an improved accuracy for thick plates over the first-order shear deformation theory is achieved at only little extra computational cost.The numerical results obtained based on different shear deformation theories are presented in comparison with the three-dimensional solutions. The effects of length-to-thickness ratio, fiber orientation, boundary conditions and electrical conditions on the natural frequency and critical buckling load of piezoelectric composite plates are investigated through numerical examples.     

Buckling of rectangular plates with various boundary conditions loaded by non-uniform inplane loads

In the present paper, buckling loads of rectangular composite plates having nine sets of different boundary conditions and subjected to non-uniform inplane loading are presented considering higher order shear deformation theory (HSDT). As the applied inplane load is non-uniform, the buckling load is evaluated in two steps. In the first step the plane elasticity problem is solved to evaluate the stress distribution within the prebuckling range. Using the above stress distribution the plate buckling equations are derived from the principle of minimum total potential energy. Adopting Galerkin's approximation, the governing partial differential equations are converted into a set of homogeneous linear algebraic equations. The critical buckling load is obtained from the solution of the associated linear eigenvalue problem. The present buckling loads are compared with the published results wherever available. The buckling loads obtained from the present method for plate with various boundary conditions and subjected to non-uniform inplane loading are found to be in excellent agreement with those obtained from commercial software ANSYS. Buckling mode shapes of plate for different boundary conditions with non-uniform inplane loadings are also presented.     

An exact solution for buckling of functionally graded circular plates based on higher order shear deformation plate theory under uniform radial compression

In this research, mechanical buckling of circular plates composed of functionally graded materials (FGMs) is considered. Equilibrium and stability equations of a FGM circular plate under uniform radial compression are derived, based on the higher order shear deformation plate theory (HSDT). Assuming that the material properties vary as a power form of the thickness coordinate variable z and using the variational method, the system of fundamental partial differential equations are established. A buckling analysis of a functionally graded circular plate (FGCP) under uniform radial compression is carried out and the results are given in closed-form solutions. The results are compared with the buckling loads of plates obtained for FGCP based on the first order shear deformation plate theory (FSDT) and classical plate theory (CPT) given in the literature. The study concludes that HSDT accurately predicts the behavior of FGCP, whereas the FSDT and CPT overestimates buckling loads.     

Buckling analysis of FGM plates under uniform,linear and non-linear in-plane loading

The paper investigates the buckling responses of functionally graded material (FGM) plate subjected to uniform, linear, and non-linear in-plane loads. New nonlinear in-plane load models are proposed based on trigonometric and exponential function. Non-dimensional critical buckling loads are evaluated using non-polynomial based higher order shear deformation theory. Navier’s method, which assures minimum numerical error, is employed to get an accurate explicit solution. The equilibrium conditions are determined utilizing the principle of virtual displacements and material property are graded in the thickness direction using simple Voigt model or exponential law. The present formulation is accurate and efficient in analyzing the behavior of thin, thick and moderately thick FGM plate for buckling analysis. It is found that with the help of displacement-buckling load curve, critical buckling load can be derived and maximum displacement due to the instability of inplane load can be obtained. Also, the randomness in the values of transverse displacement due to inplane load increases as the extent of uniformity of the load on the plate is disturbed. Furthermore, the parametric varying studies are performed to analyse the effect of span-to-thickness ratio, volume fraction exponent, aspect ratio, the shape parameter for non-uniform inplane load, and non-dimensional load parameter on the non-dimensional deflections, stresses, and critical buckling load for FGM plates.

     

Isogeometric bending analysis of composite plates based on a higher-order shear deformation theory

This research paper presents an isogeometric plate finite element formulation for analysis of thick composite plates. Isogeometric finite element method which is based on non-uniform rational B-splines (NURBS) basis functions, is a novel numerical procedure developed to bridge the gap between CAD and FEM modeling of structures. In order to investigate the behavior of isogeometric plate elements under static loading, plate kinematics is based on third order shear deformation theory (TSDT) of Reddy, which is free from transverse shear locking. This paper discusses accurate transverse stress recovery procedures for TSDT isogeometric finite elements. Numerical experiments with quadratic, cubic and quartic elements are presented and obtained results are compared to other available ones.     

含分层复合材料层合板剪切屈曲的实验研究

对含分层损伤的复合材料层合板在纯剪切条件下进行屈曲试验,并通过对试验载荷-应变曲线及损伤形貌的分析以及试验结果和有限元模拟结果的比较,得出复合材料层合板预制分层损伤面积对其剪切屈曲性能的影响.结果表明,试验件含分层损伤面积越大,其破坏载荷越大,而对应的破坏应变越大,因此分层损伤会降低复合材料层合板的承载力和刚度.含分层损伤的层合板试验件其屈曲临界载荷随着分层损伤面积的增加而减小,抗屈曲性能也随之降低.     

Buckling analysis of a laminated composite plate with delaminations using the enhanced assumed strain solid shell element

The paper deals with the validation of a recently proposed hexahedral solid-shell finite element in the buckling analysis of a laminated composite plate with delaminations. The object is to study the buckling behavior of structures with delaminations using the enhanced assumed strain (EAS) solid shell element with 5, 7 and 9 parameters. The EAS three-dimensional finite element formulation presented in this paper is free from shear locking and leads to accurate results for distorted element shapes. The developed FE model is used to study the effects of some parameters in the buckling load, such as the stacking sequences, delamination size, aspect ratio, width-to-thickness ratio. The feasibility of the proposed method is confirmed by numerical examples. Results show that using hexahedral solid-shell finite element in the buckling analysis is more efficient than using the enhanced solid finite element.     

Buckling and vibration of anisotropic or isotropic plate assemblies under combined loadings

This paper describes the underlying theory, and a general-purpose computer program, VIPASA, for determining the critical buckling stresses or natural frequencies of vibration of thin prismatic structures, consisting of a series of plates rigidly connected together along longitudinal edges. Each plate may be either isotropic or anisotropic and may carry a basic stress system consisting of longitudinal and transverse direct stress combined with shear. The structure is assumed to be subjected to a “dead load” system which does not cause buckling; in addition a “live load” system, defined in magnitude by a single load factor, may be applied and the value of the load factor at buckling is determined. Alternatively the natural frequencies of vibration of the structure when subjected to the dead load system are determined. Any number of critical load factors or natural frequencies can be obtained. The theory is based upon the assumption that all modes are sinusoidal, in the sense that all three components of displacement vary sinusoidally along any longitudinal line, but phase differences are incorporated to allow for the effects of anisotropy and shear. Apart from this assumption no further approximations are made other than those inherent in thin plate theory.     

Finite element analysis of stress concentrations and failure criteria in composite plates with circular holes

In this study, the stress concentration factors (SCF) in cross-and-angle-ply laminated composite plates as well as in isotropic plates with single circular holes subjected to uniaxial loading is studied. A quadrilateral finite element of four-node with 32 degrees of freedom at each node, previously developed for the bending and mechanical buckling of laminated composite plates, is used to evaluate the stress distribution in laminated composite plates with central circular holes. Based up on the classical plate theory, the present finite element is a combination of a linear isoparametric membrane element and a high precision rectangular Hermitian element. The numerical results obtained by the present element compare favorably with those obtained by the analytic approaches published in literature. It is observed that the obtained results are very close to the reference results, which demonstrates the accuracy of the present element. Additionally, to determine the first ply failure (FPF) of laminated plate, several failure criterions are employed. Finally, to show the effect of E ₁/E ₂ ratio on the failure of plates, a number of figures are given for different fiber orientation angles.     

Generalized buckling analysis of laminated plates with random material properties using stochastic finite elements

A generalized layer-wise stochastic finite element formulation is developed for the buckling analysis of both homogeneous and laminated plates with random material properties. The pre-buckled stresses are considered in the derivation of geometric stiffness matrix and the effect of variation in these stresses on the mean and coefficient of variation of buckling strength is studied. The mean buckling strength of plates under uniform stress assumption exactly matches with those reported in the literature. However, it is shown that the actual mean buckling strength of plates can be significantly different based on the pre-buckled stress analysis which depends on boundary constraints, principal material directions, aspect and thickness ratios of plates. The statistics of buckling strength is determined using a Taylor series expansion based mean centered first order perturbation technique. The stochastic finite element solutions obtained using layer-wise plate theory is also validated with analytical solutions presented in this paper. Parametric studies are conducted for different aspect ratios, ply orientations and boundary conditions.     

Buckling of laminated sandwich plates subjected to partial edge compression

The buckling characteristics of sandwich plates having laminated stiff layers are studied for different types of partial edge loadings using a refined plate theory. With this plate theory, the through thickness variation of transverse shear stresses is represented by piecewise parabolic functions where the continuity of these stresses is satisfied at the layer interfaces by taking jumps in the transverse shear strains at the interfaces. The transverse shear stresses free condition at the plate top and bottom surfaces is also satisfied. It is quite interesting to note that this plate model having all these refined features requires unknown parameters only at the reference plane. To have a generality in the present analysis, finite element technique is adopted and it is carried out with newly developed triangular element, as existing finite elements cannot accommodate this plate model. So far, no solution exists in the literature for the problem of sandwich plate subjected to partial edge loading. The present analysis is first validated for the case of an isotropic plate subjected to partial edge compression and then it is extended to analyze sandwich plates. Few results are presented.     

Buckling of laminated composite plates subjected to mechanical and thermal loads using meshless collocations

Meshless collocations utilizing Gaussian and Multiquadric radial basis functions for the stability analysis of orthotropic and cross ply laminated composite plates subjected to thermal and mechanical loading are presented. The governing differential equations of plate are based on higher order shear deformation theory considering two different transverse shear stress functions. The plate governing differential equations are discretized using radial basis functions to cast a set of simultaneous equations. The convergence of both radial basis functions is studied for different values of shape parameters. Several numerical examples are undertaken to demonstrate the accuracy of present method and the effects of orthotropy ratio of the material, span to thickness ratio of the plate, and fiber orientation on critical load/temperature are also presented.