High temperature scaling of Ni-xSi-10 at.% Al alloys in 1 atm of pure O2

The oxidation of Ni-xSi-10Al alloys (with x = 0, 2, 4 and 6 at.%), has been studied at 900 and 1000 °C in 1 atm of pure O₂ to examine the effect of different silicon additions on the behavior of ternary Ni-Si-10Al alloys. The kinetic curves of Ni-10Al are approximately parabolic at both 900 and 1000 °C. Conversely, the kinetics of the ternary alloys at both temperatures correspond generally to a rate decrease faster than predicted by the parabolic rate law, except for the oxidation of Ni-6Si-10Al at 1000 °C, which exhibits a single nearly-parabolic stage. Oxidation of the binary alloy formed at both temperatures an internal oxidation zone beneath a layer of NiO. Oxidation of Ni-2Si-10Al at both temperatures and of the other two alloys at 900 °C formed initially a zone of internal oxidation of Al + Si. However, a layer of alumina forming at the front of internal oxidation after some time blocked the internal oxidation and produced a gradual conversion of the metal matrix of this region into NiO, with a simultaneous decrease of the oxidation rate. Conversely, the oxidation of Ni-4Si-10Al and Ni-6Si-10Al at 1000 °C did not produce an internal oxidation, but formed an alumina layer directly on the alloy surface after an initial stage when also Ni was oxidized. Therefore, silicon exerts the third-element effect by reducing the critical Al content needed for the transition from its internal to its external oxidation with respect to the corresponding Ni-Al alloy. This result is interpreted by means of an extension to ternary alloys of Wagner’s criterion for the same transition in binary alloys based on the attainment of a critical volume fraction of internal oxide.     

The effect of Si additions on the high temperature oxidation of a ternary Ni-10Cr-4Al alloy in 1 atm O2 at 1100 °C

The oxidation of four Ni-10Cr-ySi-4Al alloys was studied at 1100 °C to examine the effects of Si additions (from 2 to 6 at.%) on the behavior of the alloy Ni-10Cr-4Al. Addition of 2 at.% Si prevented completely nickel oxidation, but could not form alumina scales. Larger Si additions produced alumina only over part of the alloy surface (about 20% with 4 at.% Si and 30% with 6 at.% Si), but could not prevent completely the internal oxidation of Al. The results are interpreted by extending to quaternary alloys the mechanism of the third-element effect already proposed for ternary alloys.     

The oxidation of two ternary Fe-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of two ternary Fe-Cu-Al alloys containing 10 at.% Al (Fe-65Cu-10Al and Fe-30Cu-10Al) has been studied at 800-900 °C under 1 atm O₂. Under all conditions both alloys show an initial faster stage during which Fe-65Cu-10Al corrodes more rapidly at 800 °C than at 900 °C, while Fe-30Cu-10Al follows nearly identical kinetics at both temperatures. As oxidation proceeds, a continuous alumina layer is eventually established on the surface of the two alloys, thus decreasing significantly their oxidation rates. Altogether, the Fe-rich alloy Fe-30Cu-10Al oxidizes slightly faster than the Cu-rich alloy Fe-65Cu-10Al at both temperatures. The possible reasons for the decrease in the critical Al content needed to form external alumina scales for the Cu-rich alloy in comparison with binary Cu-Al alloys are examined.     

The nature of the third-element effect in the oxidation of Fe-xCr-3 at.% Al alloys in 1 atm O2 at 1000 °C

The oxidation of an Fe-Al alloy containing 3 at.% Al and of four ternary Fe-Cr-Al alloys with the same Al content plus 2, 3, 5 or 10 at.% Cr has been studied in 1 atm O₂ at 1000 °C. Both Fe-3Al and Fe-2Cr-3Al formed external iron-rich scales associated with an internal oxidation of Al or of Cr+Al. The addition of 3 at.% Cr to Fe-3Al was able to stop the internal oxidation of Al only on a fraction of the alloy surface covered by scales containing mixtures of the oxides of the three alloy components, but not beneath the iron-rich oxide nodules which covered the remaining alloy surface. Fe-5Cr-3Al formed very irregular external scales where areas covered by a thin protective oxide layer alternated with others covered by thick scales containing mixtures of the oxides of the three alloy components, undergrown by a thin layer rich in Cr and Al, while internal oxidation was completely absent. Conversely, Fe-10Cr-3Al formed very thin, slowly-growing external Al₂O₃scales, providing an example of third-element effect (TEE). However, the TEE due to the Cr addition to Fe-3Al was not directly associated with a prevention of the internal oxidation of Al, but rather with the inhibition of the growth of external scales containing iron oxides. This behavior has been interpreted on the basis of a qualitative oxidation map for ternary Fe-Cr-Al alloys taking into account the existence of a complete solid solubility between Cr₂O₃ and Al₂O₃.     

Effect of silicon on oxidation of Ni-15Al alloy

1　INTRODUCTIONChromium, aluminum, and silicon can formsatisfactory protective scales on Ni based alloys.Chromium is expensive and not suitable for use attemperatures above 1 000℃ due to the evaporationof CrO3. It has also been well established that theincorporation of Si in many alloy systems has abeneficial effect on their oxidation resistance[1, 2].In addition, silicon is abundant and cheap. More over, Si has one of the largest solubility in Ni3Alwhere it …     

Oxidation of a quaternary three-phase Cu-20Ni-20Cr-5Fe alloy at 700-900 °C in 1 atm of pure O2

The oxidation of a quaternary Cu-Ni-Cr-Fe alloy containing approximately 20 at.% Ni, 20 at.% Cr and 5 at.% Fe, balance Cu (Cu-20Ni-20Cr-5Fe), was studied at 700-900 °C in 1 atm of pure oxygen. The alloy is composed of a mixture of three phases, where the lightest α phase with the largest Cu content forms the matrix, while the other two, much richer in Cr, form a dispersion of isolated particles. At variance with the ternary three-phase Cu-20Ni-20Cr alloy examined previously, which was unable to form protective chromia scales over the alloy surface even after an extended period of oxidation, the present alloy formed complex external scales containing mixtures of the oxides of the various components plus a deep internal region containing a mixture of alloy and oxide phases. With time, a very irregular and thin but essentially continuous chromia layer formed at the bottom of the mixed internal oxidation region, producing a gradual decrease of the oxidation rate. Thus, the addition of 5 at.% Fe to Cu-20Ni-20Cr alloy is able to decrease the critical Cr content required to form the most stable oxide and promotes the formation of a continuous chromia scale under a lower Cr content in spite of the simultaneous presence of three different phases.     

Criteria for the formation of protective Al2O3 scales on Fe-Al and Fe-Cr-Al alloys

The conditions for the formation of external alumina scales on binary Fe-Al alloys and the nature of the third-element effect due to chromium additions have been investigated by studying the oxidation at 1000 °C in 1 atm O₂ of a binary Fe-10 at.% Al alloy (Fe-10Al) and of two ternary Fe-Cr-10 at.% Al alloys containing 5 and 10 at.% chromium (Fe-5Cr-10Al and Fe-10Cr-10Al, respectively). An Al-rich scale developed initially on Fe-10Al was subsequently replaced by a multi-layered scale containing mixtures of Fe and Al oxides plus a large number of Fe-rich oxide nodules: internal aluminum oxidation was essentially absent from this alloy. Addition of 5 at.% chromium to Fe-10Al did not suppress the formation of nodules, but they were eventually healed by the growth of an alumina layer at their base, resulting in a significant reduction of the oxidation rate. Finally, the alloy with 10 at.% Cr formed continuous external alumina scales without any Fe-rich nodule. Thus, the addition of sufficient amounts of chromium to Fe-10Al produces a third-element effect as expected. However, the process found in this alloy system does not involve a prevention of the internal oxidation of Al. Instead, it shows a transition from the growth of mixed Fe- and Al-rich external scales directly to an external Al₂O₃ scale formation. An interpretation of this kind of mechanism involving a third-element is presented along with a prediction of the critical Al contents required to produce the various possible scaling modes on binary Fe-Al alloys.     

The third-element effect in the oxidation of Ni–xCr–7Al (x = 0, 5, 10, 15 at.%) alloys in 1 atm O2 at 900–1000 °C

The oxidation in 1 atm of pure oxygen of Ni–Cr–Al alloys with a constant aluminum content of 7 at.% and containing 5, 10 and 15 at.% Cr was studied at 900 and 1000 °C and compared to the behavior of the corresponding binary Ni–Al alloy (Ni–7Al). A dense external scale of NiO overlying a zone of internal oxide precipitates formed on Ni–7Al and Ni–5Cr–7Al at both temperatures. Conversely, an external Al₂O₃ layer formed on Ni–10Cr–7Al at both temperatures and on Ni–15Cr–7Al at 900 °C, while the scales grown initially on Ni–15Cr–7Al at 1000 °C were more complex, but eventually developed an innermost protective alumina layer. Thus, the addition of sufficient chromium levels to Ni–7Al produced a classical third-element effect, inducing the transition between internal and external oxidation of aluminum. This effect is interpreted on the basis of an extension to ternary alloys of a criterion first proposed by Wagner for the transition between internal and external oxidation of the most reactive component in binary alloys.     

The Oxidation of Two Ternary Ni–Cu–5 at.%Al Alloys in 1 atm of Pure O2 at 800–900°C

The oxidation of a Ni-rich and a Cu-rich single-phase ternary alloy containing about 5at.% aluminum has been studied at 800 and 900°C under 1atm O₂. The behavior of the Ni-rich alloy is similar to that of a binary Ni–Al alloy with a similar Al content at both temperatures, with formation of an external NiO layer coupled to the internal oxidation of aluminum. The Cu-rich ternary alloy shows a larger tendency to form protective alumina scales, even though its behavior is borderline between protective and non-protective. In fact, at 800°C, after an initial stage of fast reaction during which all the alloy components are oxidized, this alloy is able to develop a continuous layer of alumina at the base of the scale which prevents the internal oxidation of aluminum. On the contrary, at 900°C the innermost alumina layer undergoes repeated rupturing followed by healing, so that internal oxidation of Al is only partly eliminated. As a result, the corrosion kinetics of the Cu-rich ternary alloy at 900°C are much faster than at 800°C and very similar to those of pure copper and of Al-dilute binary Cu–Al alloys. Possible reasons for the larger tendency of the Cu-rich alloy to form external alumina scales than the Ni-rich alloy are examined.     

Oxidation of Two Ternary Fe–Cu–5 at.% Al Alloys in 1 atm of Pure O2 at 800°C

The oxidation of two two-phase ternary Fe–Cu–Al alloys containing about 5 at.% aluminium, one Fe-rich and one Cu-rich, has been studied at 800°C under 1 atm O₂. The Fe-rich alloy (Fe–15Cu–5Al) shows two parabolic stages, with a large decrease of the parabolic rate constant after about 2 hr. The presence of 5 at.% Al reduces significantly the oxidation rate of this alloy with respect to a binary Fe-Cu alloy of similar composition by forming an external alumina scale. Moreover, the addition of 15 at.% Cu is able to reduce the critical aluminium content needed to form alumina scales with respect to binary Fe–Al alloys. On the contrary, the Cu-rich Fe–85Cu–5 Al alloy presents a single parabolic stage and forms a thick and porous external scale composed of an outermost layer of copper oxides and an inner region containing a mixture of copper and Fe–Al oxides, coupled to the internal oxidation of iron and aluminium. As a result, the oxidation of the Cu-rich ternary alloy at 800°C is much faster than that of the Fe-rich ternary alloy.     

Effect of Zn Additions on the Oxidation of Cu–2 at.% Al and Cu–4 at.% Al Alloys in 1 atm O2 at 800 °C

Four ternary Cu–Zn–Al alloys containing 5 or 10 at.% Zn and 2 or 4 at.% Al plus an alloy containing 2 at.% Al and 15 at.% Zn have been oxidized at 800 °C in 1 atm O₂, and their behavior has been compared with that of the corresponding binary Cu–Zn and Cu–Al alloys. For the alloy containing 4 at.% Al, which is already able to form external alumina scales, the addition of Zn is only effective in reducing the mass gain during the fast, initial-oxidation stage. Conversely, the addition of 15 at.% Zn to Cu–2Al is able to prevent the formation of external scales containing mixtures of the Cu and Al oxides, resulting in the formation of external alumina scales after an initial stage of faster rate, producing a limited third-element effect. Finally, the addition of Al to both Cu–5Zn and Cu–10Zn is able to prevent the internal oxidation of Zn, producing a kind of reversed third-element effect. Possible mechanisms for these effects are examined on the basis of general treatments concerning the scaling behavior of ternary alloys.     

The Effect of Silicon on the Oxidation of a Ni-6 at.% Al Alloy in 1 atm of pure O2 at 900°C

The oxidation behavior of a binary Ni–6Al alloy and of three ternary Ni–xSi–6Al alloys containing 2, 4 and 6 at.% Si has been studied at 900°C under 1 atm of pure O₂. The addition of 2 at.% Si to Ni–6Al increases the short-time oxidation rate of Ni–6Al, which is subsequently reduced and becomes similar to that of the binary alloy. However, the presence of this silicon level is already able to stop after some time the coupled internal oxidation of Al+Si by forming a healing oxide layer rich of alumina at the front of internal oxidation. The addition of 4 at.% Si to the same alloy permits a more rapid inhibition of the internal oxidation and the formation of a steady-state, inner alumina-rich scale. Finally, the addition of 6 at.% Si prevents the internal oxidation completely and leads to an earlier growth of a protective oxide layer in contact with the alloy as well as to a further reduction in the scaling rate. The role of Si in promoting the formation of protective scales in comparison with the binary alloy is examined on the basis of an extension to ternary alloys of a criterion proposed by Wagner for the transition between the internal and external oxidation of the most reactive component in binary alloys.     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.     

Synthesis and oxidation behavior of platinum-enriched γ + γ′ bond coatings on Ni-based superalloys

Simple Pt-enriched γ + γ′ coatings were synthesized on René 142 and René N5 Ni-based superalloys by electroplating a thin layer of Pt followed by a diffusion treatment at 1150-1175 °C. The Al content in the resulting γ + γ′ coating was in the range of 16-19 at.% on superalloys with 13-14 at.% Al. After oxidation testing, alumina scale adherence to these γ + γ′ coatings was not as uniform as to the β-(Ni,Pt)Al coatings on the same superalloy substrates. To better understand the effect of Al, Pt and Hf concentrations on coating oxidation resistance, a number of Ni-Pt-Al cast alloys with γ + γ′ or β phase were cyclically oxidized at 1100 °C. The Hf-containing γ + γ′ alloys with 22 at.% Al and 10-30 at.% Pt exhibited similar oxidation resistance to the β alloys with 50 at.% Al. An initial effort was made to increase the Al content in the Pt-enriched γ + γ′ coatings by introducing a short-term aluminizing process via chemical vapor deposition or pack cementation. However, too much Al was deposited, leading to the formation of β or martensitic phase on the coating surface.     

Oxidation of Fe-xCr-10Al (x=0, 5, 10) Alloys at 900 ℃: A Novel Example of the Third Element Effect

通过研究Ee-10Al，Fe-15Cr-10Al和Fe-10Cr-10Al(原子分数，％)合金在900℃的氧化行为，分析了二元Fe-Al合金形成选择性氧化铝膜所需的临界铝浓度．讨论了三元Fe-Cr-Al合金形成保护性氧化膜的机理，对于不发生Al的内氧化的情况，提出合金中第三组元Cr的作用机制的新解释．     

High temperature corrosion of cast heat resisting steels in CO + CO2 gas mixtures

Two commercial variants of the cast heat resistant grade HP40Nb (Fe-25Cr-35Ni, Nb modified) were exposed to CO/CO₂ gases at 982 and 1080 °C in order to simulate exposure to the carbon and oxygen potentials realised in steam reformers under normal and overheated conditions. Both alloys developed external chromium-rich oxide scales, intradendritic silica precipitates and interdendritic oxide protrusions where primary, interdendritic carbides were oxidised in situ. Surprisingly, the lower silicon content alloy developed a more continuous internal silica layer, thereby slowing external scaling. Intradendritic oxidation was fast in both alloys, and is attributed to interfacial oxygen diffusion. Both alloys underwent rapid internal carburisation, indicating that their oxide scales failed to prevent carbon access to the underlying alloys under these reaction conditions.     

High temperature oxidation of iron-manganese-aluminum based alloys

The isothermal oxidation resistance of high purity iron-manganese-aluminum alloys containing from 0 to 40% manganese and from 0 to 15% aluminum was investigated at 600, 800, and 1000°C in pure oxygen at a pressure of 200 torr for periods up to 100 hr. They were subsequently examined using SEM and metallographic techniques, and an oxide map showing the alloy structure and general oxidation behavior at 800°C was produced. Scales formed on alloys which contain insufficient aluminum to form protective alumina have structures which depend largely upon the concentration of manganese in the alloy. Alloys which contain more than 7.5% manganese form manganese rich scales, whereas alloys which contain lower levels of manganese form scales that are composed almost entirely of the oxides of iron. Small manganese oxide nodules grow through the alumina scales which form on alloys containing in excess of 9% aluminum. The most oxidation resistant alloys, having compositions within the range Fe-(5–10)%Mn-(6–10)% Al, develop continuous protective alumina scales and are totally ferritic. Austenite is detrimental to the oxidation resistance of duplex alloys as it promotes the breakdown of preexisting alumina scales and the growth of bulky manganese rich oxides. Small additions of chromium are beneficial and reduce the concentration of aluminum required to form protective alumina scales.     

Corrosion of Ni-Ti alloys in the molten (Li,K)2CO3 eutectic mixture

The corrosion of pure Ni and of binary Ni-Ti alloys containing 5, 10, and 15 wt.% Ti respectively in molten (0.62Li,0.38K)₂CO₃ at 650°C under air has been studied. The corrosion of the single-phase Ni-5Ti alloy was slower than that of pure Ni, forming an external scale composed of NiO and TiO₂. The two-phase Ni-10Ti and Ni-15Ti alloys underwent much faster corrosion than pure Ni, producing an external scale containing NiO and TiO₂, and a thick internal oxidation zone of titanium mainly involving the intermetallic compound TiNi₃ in the original alloys. The rates of growth of the external scales for the Ni-Ti alloys were reduced with the increase of their titanium content, while the internal oxidation was significantly enhanced. The corrosion mechanism of the alloys is also discussed.     

The Effect of Si Additions on the High-Temperature Oxidation of a Ternary Ni–10Cr–4Al Alloy in 1 ATM O2 AT 900–1000 °C

The oxidation of four Ni–10Cr–ySi–4Al alloys has been studied in 1 atm O₂ at 900 and 1000 °C to examine the effects of various Si additions on the behavior of the ternary alloy Ni–10Cr–4Al, which during an initial stage formed external NiO scales associated with an internal oxidation of Cr + Al, later replaced by the growth of a chromia layer at the base of the scale plus an internal oxidation of Al. The addition of 2 at.% Si was able to prevent the oxidation of nickel already from the start of the test, but was insufficient to form external alumina scales at 1000 °C, while at 900 °C alumina formed only over a fraction of the alloy surface. At 1000 °C the addition of 4 at.% Si produced external chromia scales plus a region of internal oxidation of Al and Si, a scaling mode which formed over a fraction of the alloy surface in combination with alumina scales also by oxidation at 900 °C. Conversely, the presence of about 6 at.% Si produced external alumina scales over the whole sample surface at 900 °C, but only over about 60 % of the alloy surface at 1000 °C. The changes in the oxidation modes of the ternary Ni–10Cr–4Al alloy produced by Si additions have been interpreted by extending to these quaternary alloys the mechanism of the third-element effect based on the attainment of the critical volume fraction of internal oxides needed for the transition to the external oxidation of the most-reactive-alloy component, already proposed for ternary alloys.     

The corrosion behavior of Ni-Al alloys and Ni-Nb-Al alloys in a H2/H2O/H2S gas mixture

The corrosion behavior of two Ni-Al alloys and four Ni-Nb-Al alloys was studied over the temperature range of 600° C to 1000° C in a mixed-gas of H₂/H₂O/H₂S. The parabolic law was generally followed, although linear kinetics were also observed. Multiple-stage kinetics were observed for the Ni-Al alloys. Generally, the scales formed on Ni-13.5Al and Ni-Nb-Al alloys were multilayered, with an outer layer of nickel sulfide with or without pure Ni particles and a complex inner scale. The outer scale became porous and discontinuous with increasing temperature. Very thin scales formed on Ni-31Al. The reduction in corrosion rate with increasing Al content is ascribed to the formation of Al₂O₃ and Al₂S₃ in the scale. Platinum markers were found at the interface between the outer and inner scales.