Glucose electro-fermentation with mixed cultures: A key role of the Clostridiaceae family

Electro-fermentation is a new type of bioprocess combining the concepts of fermentation and electro-microbiology to improve the conversion of organic substrates into valuable fermentation products. During electro-fermentation metabolic profiles could be redirected by the presence of polarized electrodes through changes in the microbial communities in the dark fermentation. This paper aims to investigate the influence of the bacterial community composition on glucose electro-fermentation in batch electro-systems. Our results showed that the initial microbial community significantly impacted the final microbial community and related metabolic patterns. During electro-fermentation, the H₂ yield was increased using anaerobic sludge but decreased using activated sludge as inocula. While using other inocula from similar origins, no differences between electro-fermentation and traditional fermentation were evidenced. The relative abundance of Clostridiaceae family members in the inoculum appeared to be a determining factor affecting the global performances. These findings provide new insights on electro-fermentation mecanisms occurring in mixed cultures.     

Enhanced hydrogen production in a UASB reactor by retaining microbial consortium onto carbon nanotubes (CNTs)

Biohydrogen and subsequent biomethane generation from biomass is a promising strategy for renewable energy supply, because this combination can lead to higher energy recovery efficiency and faster fermentation than single methane fermentation. Microbial consortium control by retaining hydrogen-producers through the addition of microbial carriers is an alternative to constructing hydrogen-producing reactors. Here we report the use of carbon nanotubes (CNTs) as microbial carriers to enhance microbial retention and the production of biohydrogen. Laboratory-scale upflow anaerobic sludge blanket (UASB) reactors with CNTs at 100 mg/L achieved a maximal hydrogen production rate of 5.55 L/L/d and a maximal hydrogen yield of 2.45 mol/mol glucose. Compared to frequently used activated carbon (AC) particles, CNTs resulted in quicker startup and better performance of hydrogen fermentation in UASB reactors. Scanning electron microscopy (SEM) and pyrosequencing results revealed that the reactor with CNTs led to a high proportion of hydrogen-producing bacteria among the microbial consortium, which endowed the microbes with strong flocculation capacity and hydrogen productivity.     

Iron chelates as low-cost and effective electrocatalyst for oxygen reduction reaction in microbial fuel cells

Iron-chelated electrocatalysts for the oxygen reduction reaction (ORR) in a microbial fuel cell (MFC) were prepared from sodium ferric ethylenediamine-N,N′-bis(2-hydroxyphenylacetic acid) (FeE), sodium ferric diethylene triamine pentaacetic acid (FeD) supported on carbon Vulcan XC-72R carbon black and multi-walled carbon nanotubes (CNTs). Catalyst morphology was investigated by TEM; and the total surfaces areas as well as the pore volumes of catalysts were examined by nitrogen physisorption characterization. The catalytic activity of the iron based catalysts towards ORR was studied by cyclic voltammetry, showing the higher electrochemical activity of FeE in comparison with FeD and the superior performance of catalysts supported on CNT rather than on Vulcan XC-72R carbon black. FeE/CNT was used as cathodic catalyst in a microbial fuel cell (MFC) using domestic wastewater as fuel. The maximum current density and power density recorded are 110 (mA m⁻²) and 127 ± 0.9 (mW m⁻²), respectively. These values are comparable with those obtained using platinum on carbon Vulcan (0.13 mA m⁻² and 226 ± 0.2 mW m⁻²), demonstrating that these catalysts can be used as substitutes for commercial Pt/C.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

Enrichment and cultivation of a sulfide-oxidizing bacteria consortium for its deploying in full-scale biogas desulfurization

Operational experiences and strategies to get suitable chemolithoautotrophic sulfide-oxidizing biomass from activated sludge wastewater treatment plant for its deploying in a full-scale biogas desulfurization plant are described. An economic nutrient source was applied to foster microbial selection and rapid growth. Respirometry was implemented on full-scale installations to monitor the ability of the specialized bacteria consortium to oxidize reduced sulfur i.e. H₂S. During the deployment in the full-scale desulfurization reactor, intermittent sulfide feed from biogas scrubbing was performed to accelerate the startup the desulfurization process.     

Simultaneous biohydrogen (H2) and bioplastic (poly-β-hydroxybutyrate-PHB) productions under dark,photo, and subsequent dark and photo fermentation utilizing various wastes

The present study is focused on bio hydrogen (H₂) and bioplastic (i.e., poly-β-hydroxybutyrate; PHB) productions utilizing various wastes under dark fermentation, photo fermentation and subsequent dark-photo fermentation. Potential bio H₂ and PHB producing microbes were enriched and isolated. The effects of substrate (rice husk hydrolysate, rice straw hydrolysate, dairy industry wastewater, and rice mill wastewater) concentration (10–100%) and pH (5.5–8.0) were examined in the batch mode under the dark and photo fermentation conditions. Using 100% rice straw hydrolysate at pH 7, the maximum bio H₂ (1.53 ± 0.04 mol H₂/mol glucose) and PHB (9.8 ± 0.14 g/L) were produced under dark fermentation condition by Bacillus cereus. In the subsequent dark-photo fermentation, the highest amounts of bio H₂ and PHB were recorded utilizing 100% rice straw hydrolysate (1.82 ± 0.01 mol H₂/mol glucose and 19.15 ± 0.25 g/L PHB) at a pH of 7.0 using Bacillus cereus (KR809374) and Rhodopseudomonas rutila. The subsequent dark-photo fermentative bio H₂ and PHB productions obtained using renewable biomass (i.e., rice husk hydrolysate and rice straw hydrolysate) can be considered with respect to the sustainable management of global energy sources and environmental issues.