7-ethylindole: A new efficient liquid organic hydrogen carrier with fast kinetics

We report a discovery of a new member of the liquid organic hydrogen carrier (LOHC) family, 7-ethylindole (7-EID), with a low melting point of ?14 °C and a decent hydrogen content of 5.23 wt%. Hydrogenation of the compound was carried out over a commercial 5 wt% Ru/Al₂O₃ catalyst in the H₂ pressure range of 5–8 MPa and a temperature range of 120–160 °C, respectively. It was found that the hydrogenation rate positively correlates with the reaction temperature. However, the rate was barely effected by the H₂ pressure if the pressure exceeds 6 MPa. The estimated apparent activation energy of 7-EID hydrogenation is 51.5 kJ/mol. The fully hydrogenated product, octahydro-7-ethylindole (8H-7-EID), was used as the reactant for the dehydrogenation reaction at 170–200 °C over a 5 wt% Pd/Al₂O₃ catalyst. Full dehydrogenation of 8H-7-EID to 7-EID can be achieved within 270 min at 190 °C. The apparent activation energy of 8H-7-EID dehydrogenation was calculated to be 101.9 kJ/mol at 170–200 °C. The liberated H₂ was found to be of high purity, which meets the requirement of proton exchange membrane fuel cells.     

Two-dimensional Mo2C: An efficient promoter for hydrogen storage and release from a liquid organic hydrogen carrier

Two-dimensional Mo₂C (2D-Mo₂C) is reported for the first time as an effective promoter of a Pt/Al₂O₃ catalyst for both the hydrogenation and dehydrogenation of the liquid organic hydrogen carrier (LOHC) pair, dibenzyltoluene (DBT) and perhydro-dibenzyltoluene (H18-DBT), respectively. Addition of 6.2 wt% 2D-Mo₂C to a Pt/Al₂O₃ catalyst resulted in a significant increase in both the degree of hydrogenation and dehydrogenation compared to the unpromoted catalyst. An analysis of the initial (120 min) perhydro-DBT dehydrogenation kinetics in the temperature range of 270–330 °C, resulted in a reduction in apparent activation energy from 119.5 ± 3.8 kJ/mol for the Pt/Al₂O₃ catalyst to 110.4 ± 5.6 kJ/mol for the 6.2 wt% 2D-Mo₂C/Pt/Al₂O₃ catalyst. The 6.2 wt% 2D-Mo₂C/Pt/Al₂O₃ catalyst was also more stable than the unpromoted catalyst over several consecutive cycles of hydrogenation and dehydrogenation. Catalyst characterization showed that addition of 2D-Mo₂C resulted in an increase in particle size and electron density of the Pt, which enhanced both the hydrogenation and dehydrogenation reactions, despite the fact that the 2D-Mo₂C alone was inactive for both reactions.     

Synergetic effect of reactive ball milling and cold pressing on enhancing the hydrogen storage behavior of nanocomposite MgH2/10 wt% TiMn2 binary system

Intermetallic TiMn₂ compound was employed for improving the de/rehydrogenation kinetics behaviors of MgH₂ powders. The metal hydride powders, obtained after 200 h of reactive ball milling was doped with 10 wt% TiMn₂ powders and high-energy ball milled under pressurized hydrogen of 70 bar for 50 h. The cold-pressing technique was used to consolidate them into 36-green buttons with 12 mm in diameter. During consolidation, the hard TiMn₂ spherical powders deeply embedded into MgH₂ matrix to form homogeneous nanocomposite bulk material. The apparent activation energies of hydrogenation and dehydrogenation for the fabricated buttons were 19.3 kJ/mol and 82.9 kJ/mol, respectively. The present MgH₂/10 wt% TiMn₂ nanocomposite binary system possessed superior hydrogenation/dehydrogenation kinetics at 225 °C to absorb/desorb 5.1 wt% hydrogen at 10 bar/200 mbar H₂ within 100 s and 400 s, respectively. This new system revealed good cyclability of achieving 414 cycles within 600 h continuously without degradations. For the present study, the consolidated buttons were used as solid-state hydrogen storage for feeding proton-exchange membrane fuel cell through a house made Ti-reactor at 250 °C. This nanocomposite system possessed good capability for providing the fuel cell with hydrogen flow at an average rate of 150 ml/min. The average current and voltage outputs were 3 A and 5.5 V, respectively.     

Improved hydrogen storage properties of Mg/MgH2 thanks to the addition of nickel hydride complex precursors

In order to improve the hydrogenation/dehydrogenation properties of the Mg/MgH₂ system, the nickel hydride complex NiHCl(P(C₆H₁₁)₃)₂ has been added in different amounts to MgH₂ by planetary ball milling. The hydrogen storage properties of the formed composites were studied by different thermal analyses methods (temperature programmed desorption, calorimetric and pressure-composition-temperature analyses). The optimal amount of the nickel complex precursor was found to be of 20 wt%. It allows to homogeneously disperse 1.8 wt% of nickel active species at the surface of the Mg/MgH₂ particles. After the decomposition of the complex during MgH₂ dehydrogenation, the formed composite is stable upon cycling at low temperature. It can release hydrogen at 200 °C and absorb 6.3 wt% of H₂ at 100 °C in less than 1 h. The significantly enhanced H₂ storage properties are due to the impact of the highly dispersed nickel on both the kinetics and thermodynamics of the Mg/MgH₂ system. The hydrogenation and dehydrogenation enthalpies were found to be of −65 and 63 kJ/mol H₂ respectively (±75 kJ/mol H₂ for pure Mg/MgH₂) and the calculated apparent activation energies of the hydrogen uptake and release processes are of 22 and 127 kJ/mol H₂ respectively (88 and 176 kJ/mol H₂ for pure Mg/MgH₂). The change in the thermodynamics observed in the formed composite is likely to be due to the formation of a Mg_0.992Ni_0.008 phase during dehydrogenation/hydrogenation cycling. The impact of another hydride nickel precursor in which chloride has been replaced by a borohydride ligand, namely NiH(BH₄)(P(C₆H₁₁)₃)₂, is also reported.     

Temperature controlled three-stage catalytic dehydrogenation and cycle performance of perhydro-9-ethylcarbazole

Organic liquid heteroaromatic compounds, e.g. 9-ethylcarbazole, are potentially promising hydrogen storage materials because they can be catalytically hydrogenated and dehydrogenated at relatively moderate temperatures. In the present work, the cyclic hydrogenation of 9-ethylcarbazole and the temperature controlled stage-wise dehydrogenation of perhydro-9-ethylcarbazole were investigated. Full hydrogenation of 9-ethylcarbazole was realized over a 5 wt% Ru/Al₂O₃ catalyst at 180 °C and 80 bar, yielding a gravimetric density of 5.79 wt%. The catalytic dehydrogenation of perhydro-9-ethylcarbazole over a 5 wt% Pd/Al₂O₃ catalyst was found to undergo a three-stage process, i.e. perhydro-9-ethylcarbazole → octahydro-9-ethylcarbazole, octahydro-9-ethylcarbazole → tetrahydro-9-ethylcarbazole, and tetrahydro-9-ethylcarbazole → 9-ethylcarbazole with the initial reaction temperatures of 128 °C, 145 °C and 178 °C, respectively. Our results indicate that 9-ethylcarbazole displays an excellent cycle performance with very little capacity degradation after 10 cycles of catalytic hydrogenation and dehydrogenation. The hydrogen gas produced from the dehydrogenation possesses a high purity of over 99.99% with no carbon monoxide or other poisonous gases for fuel cells.     

Catalysis derived from flower-like Ni MOF towards the hydrogen storage performance of magnesium hydride

Herein, a novel flower-like Ni MOF with good thermostability is introduced into MgH₂ for the first time, and which demonstrates excellent catalytic activity on improving hydrogen storage performance of MgH₂. The peak dehydrogenation temperature of MgH₂-5 wt.% Ni MOF is 78 °C lower than that of pure MgH₂. Besides, MgH₂-5 wt.% Ni MOF shows faster de/hydrogenation kinetics, releasing 6.4 wt% hydrogen at 300 °C within 600 s and restoring about 5.7 wt% hydrogen at 150 °C after dehydrogenation. The apparent activation energy for de/hydrogenation reactions are calculated to be 107.8 and 42.8 kJ/mol H₂ respectively, which are much lower than that of MgH₂ doped with other MOFs. In addition, the catalytic mechanism of flower-like Ni MOF is investigated in depth, through XRD, XPS and TEM methods. The high catalytic activity of flower-like Ni MOF can be attributed to the combining effect of in-situ generated Mg₂Ni/Mg₂NiH₄, MgO nanoparticles, amorphous C and remaining layered Ni MOF. This research extends the knowledge of elaborating efficient catalysts via MOFs in hydrogen storage materials.     

Hydro-catalytic treatment of organoamine boranes for efficient thermal dehydrogenation for hydrogen production

This study aims to present the hydro-catalytic treatment of organoamine boranes for efficient thermal dehydrogenation for hydrogen production. Organoamine boranes, methylamine borane (MeAB), and ethane 1,2 diamine borane (EDAB), known as ammonia borane (AB) carbon derivatives, are synthesized to be used as a solid-state hydrogen storage medium. Thermal dehydrogenation of MeAB and EDAB is performed at 80 °C, 100 °C, and 120 °C under different conditions (self, catalytic, and hydro-catalytic) for hydrogen production and compared with AB. For this purpose, a cobalt-doped activated carbon (Co-AC) catalyst is fabricated. The physicochemical properties of Co-AC catalyst is investigated by well-known techniques such as ATR/FT-IR, XRD, XPS, ICP-MS, BET, and TEM. The synthesized Co-AC catalyst obtained in nano CoOOH structure (20 nm, 12% Co wt) is formed and well-dispersed on the activated carbon support. It has indicated that Co-AC exhibits efficient catalytic activity towards organoamine boranes thermal dehydrogenation. Hydrogen release tests show that hydro-catalytic treatment improves the thermal dehydrogenation kinetics of neat MeAB, EDAB, and AB. Co-AC catalyzed hydro-treatment for thermal dehydrogenation of MeAB and EDAB acceleras the hydrogen release from 0.13 mL H₂/min to 46.12 mL H₂/min, from 0.16 mL H₂/min to 38.06 mL H₂/min, respectively at 80 °C. Moreover, hydro-catalytic treatment significantly lowers the H₂ release barrier of organoamine boranes thermal dehydrogenation, from 110 kJ/mol to 19 kJ/mol for MeAB and 130 kJ/mol to 21 kJ/mol for EDAB. In conclusion, hydro and catalytic treatment presents remarkable synergistic effect in thermal dehydrogenation and improves the hydrogen release kinetics.     

Remarkable kinetics of novel Ni@CeO2–MgH2 hydrogen storage composite

Magnesium hydroxide (MgH₂) has excellent reversibility and high capacity, and is one of the most promising materials for hydrogen storage in practical applications. However, it suffers from high dehydrogenation temperature and slow sorption kinetics. Rare earth hydrides and transition metals can both significantly improve the de/hydrogenation kinetics of MgH₂. In this work, MgH₂–Mg₂NiH₄–CeH_2.73 is in-situ synthesized by introducing Ni@CeO₂ into MgH₂. The unique coating structure of Ni@CeO₂ facilitates homogeneous distribution of synergetic CeH_2.73 and Mg₂NiH₄ catalytic sites in subsequent ball milling process. The as-fabricated composite MgH₂-10 wt% Ni@CeO₂ powders possess superior hydrogenation/dehydrogenation characteristics, absorbing 4.1 wt% hydrogen within 60 min at 100 °C and releasing 5.44 wt% H₂ within 10 min at 350 °C. The apparent activation energy of MgH₂-10 wt% Ni@CeO₂ is determined to be 84.8 kJ/mol and it has favorable hydrogen cycling stability with almost no decay in capacity after 10 cycles.     

Excellent catalytic effect of LaNi5 on hydrogen storage properties for aluminium hydride at mild temperature

The catalytic effect of rare-earth hydrogen storage alloy is investigated for dehydrogenation of alane, which shows a significantly reduced onset dehydrogenation temperature (86 °C) with a high-purity hydrogen storage capacity of 8.6 wt% and an improved dehydrogenation kinetics property (6.3 wt% of dehydrogenation at 100 °C within 60 min). The related mechanism is that the catalytic sites on the surface of the hydrogen storage alloy and the hydrogen storage sites of the entire bulk phase of the hydrogen storage reduce the dehydrogenation temperature of AlH₃ and improve the dehydrogenation kinetic performance of AlH₃. This facile and effective method significantly improves the dehydrogenation of AlH₃ and provides a promising strategy for metal hydride modification.     

Remarkably improved hydrogen storage properties of carbon layers covered nanocrystalline Mg with certain air stability

Different nanocrystalline magnesium with carbon layers were successfully synthesized via a facile wet-chemical ball milling method for 20, 30 and 40 h, respectively. Based on Scherrer formula and X-ray diffraction results, the average crystallite size of all the three samples was below 30 nm. TEM observations showed that the hydrogenated Mg particles were covered with carbon layers. Moreover, the 40 h ball milled Mg sample showed outstanding hydrogen storage performance especially in the aspect of hydrogen absorption. The as-prepared sample started to take up hydrogen at nearly room temperature and eventually absorbed 6.8 wt% hydrogen at 200 °C. The apparent activation energy (E_a) of hydrogen absorption for the sample was decreased to 26.7 kJ/mol, much lower than that of other reported systems. For the dehydrogenation experiments, the hydrogenated sample could start to release hydrogen at about 275 °C and 6.5 wt% hydrogen was desorbed in 20 min at 325 °C. Interestingly, the prepared samples showed noteworthy air stability. Been placed in the air for 60 min, the dehydrogenation kinetics and hydrogen capacity of the three samples were basically unchanged, making it possible to be used in future commercial applications.     

Reversible hydrogen storage in a 3NaBH4/YF3 composite

A 3NaBH₄/YF₃ hydrogen storage composite was prepared through ball milling and its hydrogen sorption properties were investigated. It is shown that NaBH₄ does not react with YF₃ during ball milling. The dehydrogenation of the composite starts at 423 °C, which is about 100 °C lower than the dehydrogenation temperature of pure NaBH₄, with a mass loss of 4.12 wt%. Pressure–Composition–Temperature tests reveal that the composite has reversible hydrogen sorption performance in the temperature range from 350 °C to 413 °C and under quite low hydrogenation plateau pressures (<1 MPa). Its maximum hydrogen storage capacity can reach up to 3.52 wt%. The dehydrogenated composite can absorb 3.2 wt% of hydrogen within 5 min at 400 °C. Based on the Pressure–Composition–Temperature analyses, the hydrogenation enthalpy of the composite is determined to be −46.05 kJ/mol H₂, while the dehydrogenation enthalpy is 176.76 kJ/mol H₂. The mechanism of reversible hydrogen sorption in the composite involves the decomposition and regeneration of NaBH₄ through the reaction with YF₃. Therefore, the addition of the YF₃ to NaBH₄ as a reagent forms a reversible hydrogen storage composite.     

Graphene-anchored Ni6MnO8 nanoparticles with steady catalytic action to accelerate the hydrogen storage kinetics of MgH2

Transition metal-based oxides have been proven to have a substantial catalytic influence on boosting the hydrogen sorption performance of MgH₂. Herein, the catalytic action of Ni₆MnO₈@rGO nanocomposite in accelerating the hydrogen sorption properties of MgH₂ was investigated. The MgH₂ + 5 wt% Ni₆MnO₈@rGO composites began delivering H₂ at 218 °C, with about 2.7 wt%, 5.4 wt%, and 6.6 wt% H₂ released within 10 min at 265 °C, 275 °C, and 300 °C, respectively. For isothermal hydrogenation at 75 °C and 100 °C, the dehydrogenated MgH₂ + 5 wt% Ni₆MnO₈@rGO sample could absorb 1.0 wt% and 3.3 wt% H₂ in 30 min, respectively. Moreover, as compared to addition-free MgH₂, the de/rehydrogenation activation energies for doped MgH₂ composites were lowered to 115 ± 11 kJ/mol and 38 ± 7 kJ/mol, and remarkable cyclic stability was reported after 20 cycles. Microstructure analysis revealed that the in-situ formed Mg₂Ni/Mg₂NiH₄, Mn, MnO₂, and reduced graphene oxide synergically enhanced the hydrogen de/absorption properties of the Mg/MgH₂ system.     

Modifying the hydrogen storage performances of NaBH4 by catalyzing with MgFe2O4 synthesized via hydrothermal method

In this study, the hydrogenation performance of NaBH₄ was modified by the addition of 10 wt% MgFe₂O₄ as the catalyst. The NaBH₄ + 10 wt% of MgFe₂O₄ sample was prepared by a ball milling technique. The onset decomposition temperature of MgFe₂O₄-doped NaBH₄ was decreased to 323 °C and 483 °C for the first and second stage of dehydrogenation as compared to the milled NaBH₄ (497 °C). The desorption kinetics study showed that the addition of MgFe₂O₄ caused the sample to had faster hydrogen desorption with a capacity of 6.2 wt% within 60 min while the milled NaBH₄ had only released 5.3 wt% of hydrogen in the same period of time. For the isothermal absorption kinetics, the total amount of hydrogen absorbed by the milled NaBH₄ was 3.7 wt% while the NaBH₄ + 10 wt% MgFe₂O₄ sample showed better absorption characteristic with a total amount of 4.5 wt% of hydrogen within 60 min. The calculated desorption activation energy from the Kissinger plot of NaBH₄ + 10 wt% MgFe₂O₄ sample was 187 kJ/mol which reduced by 28 kJ/mol than the milled NaBH₄ (215 kJ/mol). The in-situ formation of MgB₆ and Fe₃O₄ after the dehydrogenation process indicates that these new species were responsible for the improved hydrogenation performances of NaBH₄.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

Intensive investigation on hydrogen storage properties and reaction mechanism of the NaBH4-Li3AlH6 destabilized system

Notable effects of Li₃AlH₆ on the hydrogen storage properties of the NaBH₄ are studied intensively. Li₃AlH₆ is synthesized by milling 2LiH-LiAlH₄ mixture for 12 h. The best molar ratio of the NaBH₄- Li₃AlH₆ destabilized system is 1:1 which has decomposed at two stages; Li₃AlH₆ decomposition stage at 170 °C and NaBH₄decomposition stage at 400 °C. As no significant effect on the decomposition temperature between 1 h and 24 h of milling time can be observed, the 1-hour milling preparation method is selected for the characterization. Isothermal absorption has shown that the system is able to absorb 4.2 wt% and 6.1 wt% of hydrogen in 60 min at 330 °C and 420 °C under 30 atm of hydrogen pressure. In contrast, only about 3.4 wt% and 3.7 wt% of hydrogen can be absorbed by the milled NaBH₄ under a similar condition. Meanwhile, the system is able to desorb 2.0 wt% and 4.1 wt% of hydrogen in 60 min at 330 °C and 420 °C in isothermal desorption while only 0.3 wt% and 2.1 wt% can be released by the milled NaBH₄ under the similar condition. The decomposition activation energy and enthalpy of the NaBH₄ stage are calculated to be 162.1 kJ/mol and 68.1 kJ/mol H₂. Based on the X-ray diffraction analysis, Na, Al and AlB₂ are formed during the dehydrogenation process. The formation of Al and AlB2 are the keys to the improvement of hydrogenation properties. It is concluded that Li₃AlH₆ is a good destabilizing agent for the NaBH₄ system.     

Improved hydrogen desorption properties of exfoliated graphite and graphene nanoballs modified MgH2

Magnesium hydride is a leading hydrogen storage material with high hydrogen content, however, suffers with sluggish kinetics. Several methods have been adopted to improve its kinetics, out of which, the addition of catalyst is an impressive way. Carbon materials have shown their promises as catalyst for several hydrogen storage materials. The present work is devoted to investigating the catalytic effects of exfoliated graphite and graphene nanoballs on dehydrogenation kinetics of MgH₂. The lowest onset temperature of 282 °C is observed for graphene nanoballs modified MgH₂ system. Exfoliated graphite mixed MgH₂ desorbed hydrogen at onset temperature 301 °C which is also less than the dehydrogenation temperature of pure MgH₂ (410 °C). The dehydrogenation kinetics has significantly improved by the addition of these catalysts as compared to the pure MgH₂. The activation energy for the hydrogen desorption of MgH₂ was reduced from 170 (pure MgH₂) to 136 ± 2 and 140 ± 2 kJ/mol by the addition of exfoliated graphite and graphene nanoballs, respectively. The XRD results confirmed the presence of MgH₂ after milling with exfoliated graphite and graphene nanoballs that indicates that there are no reactions during the milling thus both the additives are effective to improve the dehydrogenation as a catalyst.     

Excellent catalysis of MoO3 on the hydrogen sorption of MgH2

To improve the hydrogen sorption kinetics of MgH₂, the MoO₃ nanobelts were added into MgH₂ by mechanical milling, leading to fine distribution of MoO₃ in the MgH₂ matrix. Compared to uncatalyzed MgH₂, the hydriding and dehydriding rates of MoO₃-catalyzed MgH₂ were significantly improved. The MgH₂ doped with 2 mol% MoO₃ exhibited fast dehydrogenation without activation, and the initial dehydrogenation amount of 5 wt% could be reached within 900 s at 300 °C. The dehydrogenation apparent activation energy is decreased down to 114.7 kJ/mol. The excellent catalytic effect of MoO₃ originates from its specific role as fast hydrogen diffusion pathways. In the hydrogenation process, the MoO₃ transformed to MoO₂, resulting in the fading of catalytic activity.     

In-situ synthesis of amorphous Mg(BH4)2 and chloride composite modified by NbF5 for superior reversible hydrogen storage properties

The solvent-free amorphous Mg(BH₄)₂ composite was in-situ synthesized by ball milling LiBH₄ and MgCl₂. It is found that the onset dehydrogenation temperature of the as-synthesized composite is 126.9 °C, which is roughly 156 °C lower than that of pristine Mg(BH₄)₂. The activation energy of the amorphous Mg(BH₄)₂ and pristine Mg(BH₄)₂ for the first dehydrogenation step was calculated as 120.01 kJ/mol and 487.99 kJ/mol, respectively. Hence the kinetics improvement is certified by the lower E_a value of the dehydrogenation process. When adding NbF₅ into the composite, the catalyzed composite exhibits better hydrogen storage properties compared to pristine and amorphous Mg(BH₄)₂. The catalyzed composite starts to release hydrogen at proximately 120 °C with a total capacity of 10.04 wt%. The reversibility of the catalyzed composite is also improved. The capacity of the catalyzed composite at the second cycle is 5.5 wt%. For the third and fourth cycles the catalyzed composite can still liberate 4 wt% H₂. Besides, the onset hydrogen desorption temperature during four cycles are extremely lower than those of pristine and amorphous Mg(BH₄)₂. The peaks of the intermediate MgB₁₂H₁₂ is detected by FTIR as the regenerated hydrogenation product in the catalyzed composite. It can be speculated from the detailed analysis that there are mainly three reasons for the improved properties. Firstly, the additive NbF₅ is favorable to enhance the hydrogen storage properties by modifying the dehydrogenation path and producing MgF₂ and NbB₂ as new products. Secondly, the in-situ formation of amorphous Mg(BH₄)₂ is likely to improve the dehydrogenation properties of the samples due to its different reactivity comparing to crystal ones. Finally, LiCl can serve as buffer in the composite and thus improve the dehydrogenation properties.     

Synergistic enhancement of hydrogen storage properties in MgH2 using LiNbO3 catalyst

Extensive researches are being conducted to improve the high dehydrogenation temperature and sluggish hydrogen release rate of magnesium hydride (MgH₂) for better industrial application. In this study, LiNbO₃, a catalyst composed of alkali metal Li and transition metal Nb, was prepared through a direct one-step hydrothermal synthesis, which remarkably improved the hydrogen storage performance of MgH₂. With the addition of 6 wt% LiNbO₃ in MgH₂, the initial dehydrogenation temperature decreases from 300 °C to 228 °C, representing a drop of almost 72 °C compared to milled MgH₂. Additionally, the MgH₂-6 wt.% LiNbO₃ composite can quickly release 5.45 wt% of H₂ within 13 min at 250 °C, and absorbed about 3.5 wt% of H₂ within 30 min at 100 °C. It is also note that LiNbO₃ shows better catalytic effect compared to solely adding Li₂O or Nb₂O₅. Furthermore, the activation energy of MgH₂-6 wt.% LiNbO₃ decreased by 44.37% compared to milled MgH₂. The enhanced hydrogen storage performance of MgH₂ is attributed to the in situ formation of Nb-based oxides in the presence of LiNbO₃, which creates a multielement and multivalent chemical environment.     

Facile synthesized Fe nanosheets as superior active catalyst for hydrogen storage in MgH2

Reversible hydrogen storage in MgH₂ under mild conditions is a promising way for the realization of “Hydrogen Economy”, in which the development of cheap and highly efficient catalysts is the major challenge. Herein, A two-dimensional layered Fe is prepared via a facile wet-chemical ball milling method and has been confirmed to greatly enhance the hydrogen storage performance of MgH₂. Minor addition of 5 wt% Fe nanosheets to MgH₂ decreases the onset desorption temperature to 182.1 °C and enables a quick release of 5.44 wt% H₂ within 10 min at 300 °C. Besides, the dehydrogenated sample takes up 6 wt% H₂ in 10 min under a hydrogen pressure of 3.2 MPa at 200 °C. With the doping of Fe nanosheets, the apparent activation energy of the dehydrogenation reaction for MgH₂ is reduced to 40.7 ± 1.0 kJ mol⁻¹. Further ab initio calculations reveal that the presence of Fe extends the Mg–H bond length and reduces its bond strength. We believe that this work would shed light on designing plain metal for catalysis in the area of hydrogen storage and other energy-related issues.