Partially crosslinked comb-shaped PPO-based anion exchange membrane grafted with long alkyl chains: Synthesis,characterization and microbial fuel cell performance

Anion exchange membranes (AEMs) with higher ion exchange capacities (IECw) are limited to applications due to excessive swelling and higher water uptake. Crosslinked macromolecular structures have been a strategy to balance between ionic conductivity and swelling in membranes. However, highly crosslinked AEMs are usually mechanically brittle and poorer in ion transport. Thus we report a series of partially diamine crosslinked (X = 10%, 15%, 20%) comb-shaped AEMs functionalized with dimethylhexadecylammonium groups exhibiting improved flexibility, water uptake and swelling properties over conventional un-crosslinked or fully crosslinked materials. The higher conductivities in these PPO AEM(X) (for example, X = 20%, IECw = 1.96 mmol/g, σ(OH⁻) ~ 67 mS/cm at 80 °C) are attributed to the distinct nanophase separation as observed in SAXS and AFM analyses. Finally, the microbial fuel cell performances of the membranes were compared with commercially available cation and anion exchange membranes.     

Macromolecular crosslink of imidazole functionalized poly(vinyl alcohol) and brominated poly(phenylene oxide) for anion exchange membrane with enhanced alkaline stability and ionic conductivity

Anion exchange membranes (AEMs) are important energy conversion device for fuel cell applications, where the overall redox reaction happened. Both alkaline stability and ionic conductivity should be considered in the long-term use of fuel cells. In this work, imidazole functionalized polyvinyl alcohol was designed as the functional macromolecular crosslinking agent to fabricate crosslinked AEMs with brominated poly(phenylene oxide) matrix. Benefitting from the macromolecular crosslinked structure, the membranes displayed enhanced ionic conductivity and alkaline stability at elevated temperature. Moreover, membrane with ion exchange capacity of 1.54 mmol/g displayed ionic conductivity of 78.8 mS/cm at 80 °C, and the conductivity could maintain 75% of the initial value after immersion in 1 M NaOH solution at 80 °C for 1000 h. Moreover, a peak power density of 105 mW/cm² was achieved when the assembled single cell with c-91 was operated at 60 °C. These results indicated that the construction of macromolecular crosslinked AEMs have great potential in the practical application of anion exchange membranes fuel cells.     

Novel quaternized carbon dots modified polysulfone-based anion exchange membranes with improved performance

At present, low conductivity and poor chemical stability are still the biggest challenges in the research on anion exchange membranes (AEMs). Herein, novel nanocomposite AEMs were first constructed by introducing quaternized carbon dots (QCDs) into the imidized polysulfone matrix (Im-PSU). QCDs were synthesized by quaternization of CDs derived from citric acid and ethylenediamine. The physicochemical properties and electrochemical properties of the nanocomposite AEMs were significantly improved due to the introduction of QCDs. It was found that the QCDs can improve the ion transport channel of the nanocomposite AEMs. Compared with pure Im-PSU AEM, the OH⁻ conductivity and physicochemical properties of the nanocomposite membranes were enhanced, and the OH⁻ conductivity of ImPSU-1.0%-QCDs composite membrane can reach 109.3 mS cm⁻¹ at 80 °C, and 61.2% initial OH⁻ conductivity was maintained in 1.0 M NaOH solution for 500 h at 60 °C. Our research proves that the nanofiller with a small size can better improve the performance of composite AEMs, and provide an efficient strategy for future research work in the design and preparation of AEMs.     

Facile self-crosslinking to improve mechanical and durability of polynorbornene for alkaline anion exchange membranes

Crosslinking is a valid approach to enhance the mechanical and durability performance of anion exchange membranes (AEMs). Herein, a facile and effective self-crosslinking strategy, with no need for an additional crosslinker or a catalyzer, is proposed. A series of tunable self-crosslinking and ion conduction polynorbornene membranes are designed. The 5-norbornene-2-methylene glycidyl ether (NB-MGE) component which affords self-crosslinking enhances dimensional stability, while the flexible 5-norbornene-2-alkoxy-1-hexyl-3-methyl imidazolium chloride (NB-O-Im⁺Cl⁻) hydrophilic unit contributes high conductivity. The crosslinking significantly decreases the water uptake, and water swelling ratio provides excellent solvent-resistance and enhances the thermal and mechanical properties. Additionally, crosslinked rPNB-O-Im-x AEMs exhibit desirable alkaline stability. Impressively, the rPNB-O-Im-30 (IEC = 1.377) shows a moderate ion conductivity (61.8 m S cm⁻¹, 80 °C), with a suppressed water absorption and 88.17% initial OH⁻ conductivity is maintained after treated for 240 h with a 1.0 M NaOH solution at 60 °C. Suitably assessed of rPNB-O-Im-30 AEM reveals a 98.4 mW cm⁻² peak power density reached at a current density of about 208 mA cm⁻². The report offers a facile and effectual preparative technique for preparing dimensional and alkaline stable AEMs for fuel cells applications.     

Graphene inclusion effect on anion-exchange membranes properties for alkaline water electrolyzers

The main issues facing the development of Anion Exchange Membranes (AEM) are the low hydroxide ion (OH⁻) conductivity compared to protons (H⁺), and the thermal and chemical stability. Based on the its unique two-dimensional structure, graphene is estimated to be one of the best solutions for the hydrogen ions (H⁺ and OH⁻) selectivity and conductivity improvement. This work presents the graphene-composite membranes (AEMGrs) preparation and characterization in comparison with commercial FAA3-20® and FAA3-30® membranes from Fumatech. Various amounts of commercial graphene were incorporated into the Fumion® FAA-3 in NMP (10%), solutions which were then used to fabricate new AEMs by the Doctor-Blade (DB) method. Commercial and graphene-composite AEMs were studied by infrared spectroscopy with Fourier Transformation (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), water uptake (WU), ion exchange capacity (IEC), and in plane four-points electrochemical impedance spectroscopy (4p-EIS). The results indicated that the composite membranes containing 50 mg of graphene exhibited an improved IEC (3.16 mmol g⁻¹) and OH⁻ conductivity (113.27 mS cm⁻¹) at 80 °C measured in 0.01 M KOH (pH = 12).     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

Preparation and characterization of a polyvinyl alcohol grafted bis-crown ether anion exchange membrane with high conductivity and strong alkali stability

A new type of symmetrical bis-crown ether is prepared by connecting dibenzo-18-crown-6 ether on both sides of the chromotropic acid, and then grafting the aforementioned bis-crown ether onto polyvinyl alcohol matrix to prepare a series of anion exchange membranes (AEMs), which their have high conductivity and strong alkali stability. These synthesized membranes were named B-C_X%-P AEMs (x is the mass percentage of the symmetrical bis-crown ether (B–C)). Then, the chemical structure of aforementioned AEMs were verified by means of ¹H NMR, FT-IR and UV. Meanwhile, the OH⁻ conductivity, alkaline stability and single cell performance of the synthesized membrane were also investigated. The results revealed that the conductivity of B–C_30%-P membrane is the highest at 80 °C (235 mS cm⁻¹), and the power density is also the highest (197 mW cm⁻²), and the alkali stability of the membrane synthesized in this paper was also improved. The conductivity at 80 °C was only reduced by 4%, which was obtained by immersing the B–C_30%-P membrane immersed in 6 mol L⁻¹ KOH solution for 168 h, which the aforementioned results proved that the synthesized membrane in this research had excellent OH⁻ conductivity and alkaline stability.     

Synthesizing spindle-shaped anion exchange membranes to improve conductivity and stability

High ionic conductivity and excellent alkaline stability are very important for solid electrolyte. Therefore, spindle-shaped anion exchange membranes (AEMs) based on poly (arylene ether ketone) and 1-Bromo-N,N,N-trimethylhexane-6-aminium bromide (Br-QA) have been prepared. The obtained Br-QA can be grafted with poly (arylene ether ketone) main chains to form micro-phase separation structure enhancing the ionic conductivity. Especially, the grafting quaternary ammonium (QA) cation groups are separated by alkyl bromine endows the AEMs with alkaline stability features. Simultaneously, the OH⁻ conductivity of the QA-PAEK-0.6 obtained membranes is 0.046 S/cm under fully hydrated conditions at 60 °C. After immersing into 1 M NaOH alkaline solution for 15 days at 60 °C, the anionic conductivity still high to 0.03 S/cm. Meanwhile, the poly (arylene ether ketone) backbones provide excellent mechanical properties and the Br-QA cation groups also possess good thermal stability, which satisfy the requirement of wide applications.     

Novel poly(carbazole-butanedione) anion exchange membranes constructed by obvious microphase separation for fuel cells

To develop anion exchange membranes with excellent chemical stability and high performance. A series of quaternary ammonium functionalized (hydrophilic) hydrophobic rigid poly (carbazole-butanedione) (HOCB-TMA-x) anion exchange membranes were prepared, where x represents the percentage content of hydrophobic unit octylcarbazole (OCB). Due to the introduction of hydrophobic rigid unit octylcarbazole and hexyl flexible side chain, the hydrophilic-hydrophobic microstructure of AEMs was developed. The AEMs exhibit excellent overall performance, specifically the low swelling ratio HOCB-TMA-30 membrane exhibits the highest OH^? conductivity of 152.9 mS/cm at 80 °C. Furthermore, the ionic conductivity of AEM decreased by only 9.5% after 2250 h of immersion in 1 M NaOH. The maximum peak power density of a single cell with a current density of 4.38 A/cm² at 80 °C was 1.85 W/cm².     

Simultaneously enhanced hydroxide conductivity and mechanical properties of quaternized chitosan/functionalized carbon nanotubes composite anion exchange membranes

Low-cost biopolymer chitosan has received considerable attention in the field of anion exchange membranes (AEMs) because it can be easily quaternized and avoids the carcinogenic chloromethylation step. Simultaneously increasing the ionic conductivity and improving mechanical properties of quaternized chitosan (QCS) is key for its high-performance application. In this study, new composite AEMs consisting of QCS and functionalized carbon nanotubes (CNTs) were prepared. CNTs were coated with a thick silica layer onto which high-density quaternary ammonium groups were then grafted. The insulator silica coating effectively prohibits electron conduction among nanotubes and the grafted –NR₃⁺ provides new OH⁻ conductive sites. Incorporating 5 wt% functionalized CNTs into the matrix enhanced ionic conductivity to 42.7 mS cm⁻¹ (80 °C) which was approximately 2 times higher than that of pure QCS. The effective dispersion of CNTs and appropriate interfacial bonding between nanofiller and QCS improved the mechanical properties of AEMs, including both the strength and toughness of the composite membranes. An alkaline direct methanol fuel cell equipped with the composite membrane (5% functionalized CNTs loading) produced an maximum power density of 80.8 mW cm⁻² (60 °C), which was 57% higher than that of pure QCS (51.5 mW cm⁻²). This study broadens the application of natural polymers and provides a new way to design and fabricate composite AEMs with both improved mechanical properties and electrochemical performance.     

Study on the partially cross-linked poly(styrene-b-(ethylene-co-butylene)-b-styrene) anion exchange membrane remotely (spaced hexyl) grafted double cation separated by different alkyl groups

In order to improve the alkali stability and OH⁻ conductivity of Poly (styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS)-based anion exchange membranes (AEMs), double cations with different alkyl intervals are remotely grafted onto the SEBS skeleton with hexyl as a linker through reactions such as acylation and ketone reduction. Then, SEBS-0.8Cn-0.2C6 cross-linked membranes were prepared to study the effect of the length of the alkyl chain between the dications on the ion transport and other properties. The OH⁻ conductivity of SEBS-0.8C4-0.2C6 cross-linked membrane can reach 85.27 mS cm⁻¹ at 80 °C, and the peak power density can reach 225 mW cm⁻² at a current density of 450 mA cm⁻². As the dicationic spacer alkyl chains became longer, the swelling rate and water uptake of the membranes increased, resulting in significant improvements in mechanical properties and chemical stability. After soaking in 2 M NaOH solution at 80 °C for 1200 h, the conductivity of SEBS-0.8C6-0.2C6 decreased by only 5.76%. Optimizing the side chain structure of SEBS skeleton can effectively improve the comprehensive performance of AEM.     

Bis-pyridinium crosslinked poly(ether ether ketone) anion exchange membranes with enhancement of hydroxide conductivity and alkaline stability

A series of tunable bis-pyridinium crosslinked PEEK-BiPy-x anion exchange membranes (AEMs) are prepared successfully to improve the “trade-off” between ionic conductivity and alkaline stability. The crosslinking density of bis-pyridinium is optimized to promote microphase separation and guarantee the free volume. All the PEEK-BiPy-x membranes have a distinct microphase separation pattern observed by atomic force microscopy (AFM) and the PEEK-BiPy-x membranes also display adequate thermal, mechanical and dimensional stability. Impressively, the PEEK-BiPy-0.5 membrane exhibits maximum tensile strength (58.53 MPa) and highest IEC of 1.316 mmol·g^?1. Meanwhile, its hydroxide conductivity reaches up to 70.86 mS·cm^?1 at 80 °C. Besides, great alkaline stability of PEEK-BiPy-0.5 membrane is obtained with conductivity retention of 91.74% after 1440 h in 1 M NaOH solution, owing to the crosslinked structure of the AEMs and steric effect of bis-pyridinium cations. Overall, the PEEK-BiPy-x membranes possess potential applications in AEMs.     

End-group crosslinked hexafluorobenzene contained anion exchange membranes

A kind of anion exchange membranes (AEMs) with CC bond end-group crosslinked structure was synthesized successfully. Unlike the traditional aliphatic AEMs, the AEMs were prepared in this work by a strategy to realize the CC bond thermal end-group crosslinking reaction, exhibiting an obvious microphase separation structure and a suitable dimensional stability. The well-defined ion channels constructed in the AEMs guarantee the fast OH⁻ conduction, as confirmed via physical and chemical characterization. The conductivity was dramatically enhanced due to the effective ion channels and increased ion exchange capacity. Among the as-prepared AEMs, the PHFB-VBC-DQ-80% AEM has a conductivity of 135.80 mS cm⁻¹ at 80 °C. The single cell based on PHFB-VBC-DQ-80% can achieve a power density of 141.7 mW cm⁻² at a current density of 260 mA cm⁻² at 80 °C. The AEMs show good thermal stability verified by a thermogravimetric analyzer (TGA). Furthermore, the ionic conductivity of PHFB-VBC-DQ-80% only decreased by 7.1% after being soaked in a 2 M NaOH solution at 80 °C for 500 h.     

Crosslinked anion exchange membranes with regional intensive ion clusters prepared from quaternized branched polyethyleneimine/quaternized polysulfone

A series of anion exchange membranes (AEMs) with regionally dense ion clusters are prepared by crosslinking quaternized polysulfone (QPSU) with quaternized branched polyethyleneimine (QBPEI). For the as-prepared QPSU/QBPEI AEMs, the hydrophilic QBPEI forms locally aggregated ion clusters in the QPSU matrix, which can promote the formation of an obvious microphase separation structure in the membrane. The QPSU/QBPEI-3 AEM with an ion exchange capacity of 1.88 meq/g exhibits the best performance, achieving a reasonably high ionic conductivity of 66.14 mS/cm at 80 °C and showing good oxidation stability and alkali resistance. Finally, the maximum power density of a single H₂/O₂ fuel cell with QPSU/QBPEI-3 AEM reaches 75.34 mW/cm² at 80 °C. The above results indicate that QBPEI with a dendritic structure and abundant anionic conductive groups has a good application prospect in the preparation of AEMs with locally aggregated ion clusters and microphase separation structures.     

Anion exchange membranes of bis-imidazolium cation crosslinked poly(2,6-dimethyl-1,4- phenylene oxide) with enhanced alkaline stability

Partially crosslinked anion exchange membranes (AEMs) with imidazolium-based cationic functionalities were fabricated based on a poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) matrix. The PPO was activated by bromomethylation and functionalized with methylimidazole and 1,4-bis(imidazolyl)butane at different ratios through a gentle and facile heat curing method. The use of 1,4-bis(imidazolyl)butane resulted in a membrane with cationic functionalities incorporated in covalent crosslinks, which allowed for high ion exchange capacities (IECs) without compromising on mechanical robustness. Comprehensive characterizations were performed in terms of thermal stability, water uptake, IEC, swelling, conductivity, mechanical properties and alkaline stability to investigate the correlation of the structure and physicochemical properties. Comparing with the un-crosslinked imidazolium PPO membrane, crosslinked membranes exhibited improved mechanical robustness and alkaline stabilities. The membrane with a crosslinking degree of 10% displayed an IEC of around 1.5 mmol g⁻¹, tensile strength of 4.1 MPa, hydroxide ion conductivity of 40.5 mS cm⁻¹, and a retained ratio in conductivity of 40% after tolerance test of nearly 150 h in 1 mol L⁻¹ KOH (aq.) at 60 °C.     

Novel multi-channel anion exchange membrane based on poly ionic liquid-impregnated cationic metal-organic frameworks

The “trade-off” effect between hydroxide conductivity and dimensional stability is challenging issue for anion exchange membrane fuel cells (AEMFCs). In this study, the framework of UiO-66-NH₂ is for the first time applied to anion exchange membranes (AEMs). The robust pore walls of UiO-66-NH₂ with mechanical and structural durabilities protect the membrane from the excessive swelling effects (a swelling ratio of 7%). In addition, the framework of UiO-66-NH₂ is directly modified into (UiO-66-NH₂)⁺Cl⁻ as hydroxide conduction channels by anion stripping for the first time. And we construct well-organized ion nanochannels by the in-situ self-assembly of N,N,N′,N' -tetramethyl-1,6-hexanediamine (TMHDA) and allyl bromide within the highly ordered pores of (UiO-66-NH₂)⁺Cl⁻. The obtained QA@(UiO-66-NH₂)⁺Cl⁻ then incorporated into pristine membrane (QAPPO) to fabricate the novel multi-channel AEMs. The hydroxide conductivity of QA@(UiO-66-NH₂)⁺Cl⁻/PPO is up to 123 mS⋅cm⁻¹ at 80 °C, which is greatly improved compared to QAPPO pristine membrane.     

Branched poly(ether ether ketone) based anion exchange membrane for H2/O2 fuel cell

High-performance anion exchange membranes (AEMs) are in need for practical application of AEM fuel cells. Novel branched poly(ether ether ketone) (BPEEK) based AEMs were prepared by the copolymerization of phloroglucinol, methylhydroquinone and 4,4′-difluorobenzophenone and following functionalization. The effects of the branched polymer structures and functional groups on the membrane's properties were investigated. The swelling ratios of all the membranes were kept below 15% at room temperature and had good dimensional stability at elevated temperatures. The branching degree has almost no effect on the dimensional change, but plays a great role in tuning the nanophase separation structure. The cyclic ammonium functionalized membrane showed a lower conductivity but a much better stability than imidazolium one. The BPEEK-3-Pip-53 membrane with the branching degree of 3% and piperidine functionalization degree of 53% showed the best performances. The ionic conductivity was 43 mS cm⁻¹ at 60 °C. The ionic conductivity in 1 M KOH at 60 °C after 336 h was 75% of its initial value (25% loss of conductivity), and the IEC was 83% of its initial value (17% loss of IEC), suggesting good alkaline stability. The peak energy density (60 °C) of the single H₂/O₂ fuel cell with BPEEK-3-Pip-53 membrane reached 133 mW cm⁻² at 260 mA cm⁻².     

Guanidinium cationic covalent organic nanosheets-based anion exchange composite membrane for fuel cells

Covalent organic frameworks (COFs) used for anion exchange membrane fuel cells (AEMFCs) are commonly endowed with ion conductivity by post-synthesis modification. However, this method usually results in uneven distribution of functional groups, low functionalization and severe ion capacity fade. Limited by hydrophobic skeleton and relatively large particle size of COFs, the COFs doping amount of the composite membrane is not high. Here we design and synthesize a series of guanidinium cationic covalent organic nanosheets-based anion exchange composite membranes. The positively charged guanidinium group as a building block can induce COF-DhaTG_Cl self-exfoliation into a few layered nanosheets through strong interlayer repulsion. Then, the nanosheets were introduced into quaternary ammonium-functionalized poly(2,6-dimethyl-1,4-phenyl ether) (QPPO). A series of COF-DhaTG_Cl/PPO composite AEMs was prepared with the highest doping amount of 30 wt% by casting method. The porous structure and repeat cationic guanidinium units on the skeleton will expose ion sites to the target ones, providing faster OH⁻ diffusion kinetics in one-dimensional channels. The OH⁻ conductivity of COF-DhaTG_Cl/PPO-20 composite membrane can reach 148.65 mS/cm at 80 °C. Meanwhile, the composite membrane also exhibits enhanced mechanical strength and alkaline stability with the maximum stress strength of 37.3 MPa and the residual conductivity of 96.29% after immersion in 2 M NaOH solution at 60 °C for two weeks.     

Dense 1,2,4,5-tetramethylimidazolium-functionlized anion exchange membranes based on poly(aryl ether sulfone)s with high alkaline stability for water electrolysis

Anion exchange membranes with enough alkaline stability and ionic conductivity are essential for water electrolysis. In this work, a class of anion exchange membranes (PAES-TMI-x) with dense 1,2,4,5-tetramethylimidazolium side chains based on poly(aryl ether sulfone)s are prepared by aromatic nucleophilic polycondensation, radical substitution and Menshutkin reaction. Their chemical structure and hydrophilic/hydrophobic phase morphology are characterized by hydrogen nuclear magnetic resonance (¹H NMR) and atomic force microscope (AFM), respectively. The water uptake, swelling ratio and ionic conductivity for PAES-TMI-x are in the range of 23.8%–48.3%, 8.3%–14.3% and 18.22–96.31 mS/cm, respectively. These AEMs exhibit high alkaline stability, and the ionic conductivity for PAES-TMI-0.25 remains 86.8% after soaking in 2 M NaOH solution at 80 °C for 480 h. The current density of 1205 mA/cm² is obtained for the water electrolyzer equipped with PAES-TMI-0.25 in 2 M NaOH solution at 2.0 V and 80 °C, and the electrolyzer also has good operation stability at current density of 500 mA/cm². This work is expected to provide a valuable reference for the selection and design of cations in high-performance AEMs for water electrolysis.     

Novel self-cross-linked multi-imidazolium cations long flexible side chains triblock copolymer anion exchange membrane based on ROMP-type polybenzonorbornadiene

A novel benzonorbornadiene derivative (BenzoNBD-Bis(Im⁺Br⁻-Im⁺I⁻)) grafted by multi-imidazolium cations side-chains combined the rigid alkyl spacer and flexible alkoxy spacer is designed and synthesized. Then, the BenzoNBD-Bis(Im⁺Br⁻-Im⁺I⁻) monomer is copolymerized with the epoxy functionalized norbornene monomer (NB-MGE) and norbornene (NB) via ring-opening metathesis polymerization (ROMP) using Grubbs 3rd catalyst. All as-designed triblock copolymer membranes (TBCMs) show a thermal decomposition temperature beyond 310 °C and can well be dissolved in common organic solvents. The self-cross-linked structure of anion exchange membrane (AEM) is confirmed by gel fraction and tensile measurement. The water uptake and swelling ratio of TBCMs and AEMs are also measured. Major properties required for AEMs such as ion exchange capacity (IEC), hydroxide conductivity and alkaline stability are investigated. AEM-9.09 shows a hydroxide conductivity of 100.74 mS cm⁻¹ at 80 °C. Besides, the micro-phase separated morphology of AEM is confirmed by TEM, AFM and SAXS analyses, AEMs formed distinct micro-phase separation. The as-prepared AEM exhibits a peak power density of 174.5 mW cm⁻² at 365.1 mA cm⁻² tested in a H₂/O₂ single-cell anion exchange membrane fuel cell (AEMFC) at 60 °C. The newly developed strategy of self-cross-linked multi-imidazolium cations long side-chains triblock benzonorbornadiene copolymer provides an effective method to develop high-performance AEMs.