CoP-anchored high N-doped carbon@graphene sheet as bifunctional electrocatalyst for efficient overall water splitting

Electrocatalytic water splitting, as an ideal technology in renewable energy applications, suffers from high electrical energy consumption due to the slow kinetics of HER and OER reactions. Therefore, it is urgent to design efficient bifunctional catalysts to improve the reaction kinetics. Herein, a self-supported electrode, anchoring CoP nanoparticles on N-doped carbon/graphene (NC-G) and chemically growing on Ni foam as a whole electrode (denoted as NC-G-CoP/NF) displays promising electrocatalytic performance in 1.0 M KOH electrolyte, with a low overpotentials of 68 mV at 10 mA cm^?2 for HER and 255 mV at 50 mA cm^?2 for OER. This bifunctional electrocatalyst only needs 1.435 V to generate 10 mA cm^?2 for overall water splitting. The outstanding electrocatalytic performance is ascribed to the following factors: i) inherent nature of transition metal phosphides, ii) abundant and high dispersion N active sites in NC-G, iii) strong interaction between the NC-G and CoP nanoparticles, and iv) rapid electron transfer between the catalytic centers and Nickle foam. This provides a new perspective to design efficient electrocatalysts for electrocatalytic water splitting.     

Facile synthesis of tubular CoP as a high efficient electrocatalyst for pH-universal hydrogen evolution

A facile three-step approach for tubular CoP preparation and its catalytic activity for HER and OER are reported. The CoP microtubes show superior HER performance in a wide pH range with low overpotentials of 91, 101 and 113 mV at 10 mA cm^?2 in 0.5 M H₂SO₄, 1 M KOH and 1 M PBS, respectively. Additionally, it also depicts superior OER performance with an overpotential of 300 mV at 10 mA cm^?2, which is lower than reported precious metal oxides. The improved electrocatalytic performance of tubular CoP is likely attributed to the porous tube-like structural features, which not only afford rich exposed active sites, but also accelerate the charge or mass transfer efficiency, and thus efficiently promote the HER performance. The synthesis of tubular CoP confirms the importance of morphology features and provides a new insight to rationally design and synthesize highly effective non-noble metal phosphide-based pH-universal electrocatalysts for HER.     

Nitrogen and molybdenum co-doped CoP nanohoneycombs on 3D nitrogen-doped porous graphene as enhanced electrocatalyst for oxygen evolution reaction

The four-electron transfer process involved in anodic oxygen evolution reaction (OER) of electrocatalytic water splitting causes the sluggish kinetics and significantly limiting the efficiency of energy conversion. It's urgent to explore low-cost, efficient and stable electrocatalysts for OER. In the work, we design the nitrogen and molybdenum co-doped CoP with nanohoneycombs structure on three-dimensional (3D) nitrogen-doped porous graphene (N/Mo–CoP@NPG) as an efficient OER electrocatalyst. The N/Mo–CoP@NPG delivers the current density of 10 mA cm⁻² at a low overpotential value of 201 mV in 1.0 M KOH, meanwhile the electrocatalytic activity shows no obvious degradation after 50 h. The NPG substrate provides plentiful ligaments for growth of N/Mo–CoP nanohoneycombs and 3D network for rapid electronic transfer. Additionally, doping N and Mo atoms into CoP synergistically modifies the micromorphology and electronic structure, benefiting the electrocatalytic ability. This work offers a promising strategy to improve the electrocatalytic activity of transition metal phosphides.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Mesoporous nickel-sulfide/nickel/N-doped carbon as HER and OER bifunctional electrocatalyst for water electrolysis

The development of non-precious metal-based highly active bi-functional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is critical factor for making water electrolysis a viable process for large-scale industrial applications. In this study, bi-functional water splitting electrocatalysts in the form of nickel-sulfide/nickel nanoparticles integrated into a three-dimensional N-doped porous carbon matrix, are prepared using NaCl as a porous structure-forming template. Microstructures of the catalytic materials are characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and N₂ adsorption-desorption analysis. The most active catalyst synthesized in this study exhibits a low HER overpotential of 70 mV at 10 mA cm⁻² and a low Tafel slope of 45 mV dec⁻¹. In OER, the optimized sample performs better than a state-of-the-art RuO₂ catalyst and produces an overpotential of 337 mV at 10 mA cm⁻², lower than that of RuO₂. The newly obtained materials are also used as HER/OER electrocatalysts in a specially assembled two-electrode water splitting cell. The cell demonstrates high activity and good stability in overall water splitting.     

Co-based MOF-derived Co/CoN/Co2P ternary composite embedded in N- and P-doped carbon as bifunctional nanocatalysts for efficient overall water splitting

In this work, we developed ternary metallic cobalt-cobalt nitride-dicobalt phosphide composite embedded in nitrogen and phosphorus co-doped carbon (Co/CoN/Co₂P-NPC) as bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The as-prepared Co/CoN/Co₂P-NPC is achieved by simultaneous annealing and phosphating of a Co–N rich metal-organic frameworks (MOFs) precursor. Compare with the phosphorus-free Co/CoN embedded nitrogen-doped carbon electrocatalyst (Co/CoN-NC), the as-prepared Co/CoN/Co₂P-NPC display superior HER and OER low overpotential of 99 mV and 272 mV at current density of 10 mA cm⁻². When Co/CoN/Co₂P-NPC electrocatalyst is use as bifunctional catalysts in overall alkaline water splitting, it exhibit excellent behaviour with 10 mA cm⁻² current at overall cell potential of 1.60 V. The excellent performance of Co/CoN/Co₂P-NPC electrocatalyst is attributed to the phosphating process that could further enhance synergistic effect, create stronger electronic interactions, and form efficient dual heteroatom doping to optimize the interfacial adhesion within the electrocatalyst. This present work will create more opportunities for the development of new, promising and more active sites electrocatalysts for alkaline electrolysis.     

Sulfuration of hierarchical Mn-doped NiCo LDH heterostructures as efficient electrocatalyst for overall water splitting

Constructing efficient bifunctional electrocatalysts for both cathode and anode is of great importance for obtaining green hydrogen by water splitting. Herein, sulfuration of hierarchical Mn-doped NiCo LDH heterostructures (Mn–NiCoS₂/NF) is constructed as a bifunctional electrocatalyst for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) via a facile hydrothermal-annealing strategy. Mn–NiCoS₂/NF shows an overpotential of 310 mV at 50 mA cm⁻² for OER and 100 mV at 10 mA cm⁻² for HER in 1.0 M KOH. Moreover, only 1.496 V@10 mA cm⁻² is required for overall water splitting by using Mn–NiCoS₂/NF as catalyst dual electrodes in a two-electrode system. The excellent performance of Mn–NiCoS₂/NF should be attributed to the ameliorative energy barriers of adsorption/desorption for HO⁻/H₂O through the modification of electronic structure of NiCo basal plane by Mn-doping and the acceleration of water dissociation steps via rich delocalized electron inside sulfur vacancies. The construction of hierarchical Mn–NiCoS₂/NF heterostructures provides new prospects and visions into developing efficient-advanced electrocatalysts for overall water splitting.     

Cobalt phosphide nanoparticles embedded in 3D N-doped porous carbon for efficient hydrogen and oxygen evolution reactions

An electrocatalyst based on a unique three-dimensional (3D) N-doped porous carbon sheet networks embedded with CoP₂ nanoparticles (CoP₂@3D-NPC) was synthesized by a facile pyrolysis process as well as an in-situ phosphatization method. The improved CoP₂@3D-NPC hybrid materials show excellent electrocatalytic activity toward HER and OER. This material provides a low overpotential of 126 mV at 10 mA cm⁻² in 0.5 M H₂SO₄ and 167 mV at 20 mA cm⁻² in 1.0 M KOH for HER with a small Tafel slope value of 59 mV dec⁻¹, respectively. Besides, it is also active for the OER under alkaline conditions. Such a prominent property of the CoP₂@3D-NPC electrocatalyst could be attributed to its excellent electrical conductivity of 3D carbon substrate, strong synergistic effect between CoP₂ nanoparticles and carbon nanosheet as well as extra active sites created by the N-doped structure.     

Mo-doped cobalt hydroxide nanosheets coupled with cobalt phosphide nanoarrays as bifunctional catalyst for efficient and high-stability overall water splitting

Exploring earth-abundant bifunctional electrocatalysts with highly efficient activity for overall water splitting is exceedingly challenging. Herein, a facile electrodeposit-phosphating-electrodeposit strategy is developed to obtain Mo-doped Co(OH)₂ nanofilms coupled with CoP nanosheets loaded on nickel foam (denoted as MoCo(OH)₂/CoP/NF). Benefitting from the unique structural merits, MoCo(OH)₂/CoP/NF exhibits outstanding electrocatalytic performance both for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The results indicate that the dopant of Mo in the Co(OH)₂ can further improve the electrocatalytic performance. To achieve a current density of 10 mA cm^?2, only 15 and 287 mV are required for HER and OER in 1 M KOH solution, respectively. When MoCo(OH)₂/CoP/NF simultaneously employed as cathode and anode for overall water splitting, it only requires 1.593 and 1.853 V to achieve 10 and 50 mA cm^?2, respectively. The electrocatalytic activity of MoCo(OH)₂/CoP/NF for overall water splitting even exceed the benchmark electrode couple of Pt/C/NF||RuO₂/NF, and MoCo(OH)₂/CoP/NF perform excellent durability for overall water splitting. This work opens up new avenues for large-scale commercial production of overall water splitting catalysts due to its low-cost and facile method.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

Electrodeposition of NiS/Ni2P nanoparticles embedded in amorphous Ni(OH)2 nanosheets as an efficient and durable dual-functional electrocatalyst for overall water splitting

To develop earth-abundant and cost-effective catalysts for overall water splitting is still a major challenge. Herein, a unique “raisins-on-bread” Ni–S–P electrocatalyst with NiS and Ni₂P nanoparticles embedded in amorphous Ni(OH)₂ nanosheets is fabricated on Ni foam by a facile and controllable electrodeposition approach. It only requires an overpotential of 120 mV for HER and 219 mV for OER to reach the current density of 10 mA cm⁻² in 1 M KOH solution. Employed as the anode and cathode, it demonstrates extraordinary electrocatalytic overall water splitting activity (cell voltage of only 1.58 V @ 10 mA cm⁻²) and ultra-stability (160 h @ 10 mA cm⁻² or 120 h @50 mA cm⁻²) in alkaline media. The synergetic electronic interactions, enhanced mass and charge transfers at the heterointerfaces facilitate HER and OER processes. Combined with a silicon PV cell, this Ni–S–P bifunctional catalyst also exhibits highly efficient solar-driven water splitting with a solar-to-hydrogen conversion efficiency of 12.5%.     

Construction of P,N-codoped carbon shell coated CoP nanoneedle array with enhanced OER performance for overall water splitting

Water electrolysis to generate hydrogen (H₂) and oxygen (O₂) was a sustainable alternative for clean energy in the future but remained challenging. Herein, we fabricated a nanoneedle-like CoP core coated by a P,N-codoped carbon shell (CoP@PNC@NF). The hierarchical structure, unique nanoneedle-like morphology, CoP core, and P,N-codoped carbon shell were responsible for the high electrocatalytic activity. Electrocatalytic tests demonstrated that CoP@PNC@NF displayed low overpotentials of 137.6 and 148.4 mV, as well as Tafel slopes of 59.89 and 56.40 mV dec⁻¹ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, at 10 mA cm⁻² in 1.0 M KOH. The bifunctional electrocatalyst CoP@PNC@NF also exhibited a low cell voltage of 1.458 V to yield 10 mA cm⁻² in the two-electrode system and could maintain the activity for 50 h. The Faradaic efficiencies of CoP@PNC@NF for both HER and OER were nearly 100%. The result outperformed the precious-metal-based electrocatalyst apparatus (RuO₂||Pt/C) and other carbon-coated transition-metal phosphides (TMPs). This work paved the way for the rational design of carbon shell-coated TMPs with low energy barriers for converting and storing electrochemical energy.     

Heterogeneous cobalt phosphides nanoparticles anchored on carbon cloth realizing the efficient hydrogen generation reaction

Intrinsic activity modifying of electrocatalysts is crucial to realizing the excellent catalytic performance towards hydrogen evolution reaction. Herein, we demonstrate a highly efficient electrocatalyst based on heterogeneous cobalt phosphides nanoparticles. The ultrafine size of the as-prepared catalyst (∼5 nm) ensures the efficient extension of active sites. Furthermore, the incorporation of orthorhombic CoP and Co₂P contributes to the improvement of the inherent catalytic property. As a consequence, the as-prepared heterogeneous cobalt phosphides nanoparticles supported on carbon cloth exhibit impressive electrocatalytic activity, which only acquire a small overpotential of 90 mV at a current density of 10 mA cm⁻², and present a low Tafel slope (67.9 mV dec⁻¹), a large exchange current density (0.58 mA cm⁻²) as well as good durability. Therefore, this work provides a favorable guidance for exploring executable strategies to improve catalyst activity.     

Metal-organic framework derived Co@NC/CNT hybrid as a multifunctional electrocatalyst for hydrogen and oxygen evolution reaction and oxygen reduction reaction

Seeking a multifunctional electrocatalyst composed of earth-abundant elements for highly hydrogen and oxygen evolution reaction and oxygen reduction reaction (HER, OER and ORR) is technically imperative for the electrocatalytic applications. Herein, we report HER, OER and ORR electrocatalytic performances of metal-organic framework (MOF) derived cobalt nanoparticles encapsulated in nitrogen-doped carbon and carbon nanotube (Co@NC/CNT). The optimized Co@NC/CNT hybrid shows superior HER and OER activities with a small overpotential of 137 mV and 302 mV at a current density of 10 mA cm⁻², respectively. Furthermore, the Co@NC/CNT as an air-cathode in secondary Zn-air battery demonstrates a confined potential gap of 0.88 V over 200 h and a maximum power density of 53.4 mW cm⁻², which are much better than those of Pt/C. The outstanding performances are attributed to the synergistic effects from Co, and N embedded into carbon and CNT. More importantly, the unique surface structure contributes to expose many active sites for superior catalytic activity through allowing a large number of electrons. These outcomes not only prove a facile approach for the preparation of metals/carbon hybrid but also disclose its huge possible as a multifunctional electrocatalyst for sustainable energy systems.     

The Mo as electron trapper and donor to modulate the electron of CoP2 in phosphating process

To prepare bifunctional electrocatalyst towards HER and OER is extremely important for promoting the development of electrochemical water splitting technology. Herein, the element doping method is employed to tune the electron environment of cobalt phosphide (CoP). The Mo-doped CoP supported on carbon cloth (CC) is constructed by solvothermal and annealing method. The effect of Mo on the electron modulation of CoP during different phosphating time was studied carefully. It is noted that the Mo play an important role in tuning the electron state of Co and P elements which can trap the electron and was reduced to low valence, then transfer the electron to Co and P. With increasing the phosphating time, the electron transfer phenomenon between Mo and CoP is obvious. Benefiting from the electron engineering of Mo, Co and P as well as thin and wrinkle sheets structure, the optimal electrocatalyst only requires 39 mV and 251 mV to deliver 10 mA cm⁻² for HER and OER, respectively. Also, as for the whole water splitting performance, it delivers 10 mA cm⁻² at cell voltage of 1.56 V. Importantly, Faraday efficiency of the optimal catalyst achieves 99.9% for HER due to the tuned electron state of Co and P, high ECSA and low R_ct.     

PBA derived FeCoP nanoparticles decorated on NCNFs as efficient electrocatalyst for water splitting

Transition metal phosphides have been known as promising electrocatalysts for hydrogen evolution and oxygen evolution reactions (HER and OER) due to their high catalytic activity. In this work, the FeCoP nanoparticles decorated on N-doped electrospun carbon nanofibers (FeCoP@NCNFs) was successfully synthesized through depositing Fe, Co-based Prussian blue analogue Co₃[Fe(CN)₆]₂·10H₂O (FeCo-PBA) onto the electrospun PVP/PAN nanofibers via layer-by-layer approach, followed by carbonization and phosphorization treatments. Benefiting from the high electrical conductivity, abundant catalytic active sites and the synergistic effect between FeCoP nanoparticles and N-doped carbon nanofibers network, the obtained FeCoP@NCNFs displays good bifunctional electrocatalytic activity. In 1 M KOH, the FeCoP@NCNFs achieves 10 mA cm^?2 at an overpotential of 290, 226 mV for OER and HER, respectively. Moreover, it demands overpotential of 196 mV to achieve 10 mA cm^?2 for HER in 0.5 M H₂SO₄. The FeCoP@NCNFs is used as both anode and cathode for overall water splitting, it requires a low voltage of 1.65 V to achieve a current density of 10 mA cm^?2 and maintains outstanding stability over 10 h. Herein, a strategy for preparing bifunctional electrocatalysts of compositing transition metal phosphides with carbon nanofibers is proposed, and the application of metal-organic framework in electrocatalytic field is further extended.     

Enriched oxygen vacancy promoted heteroatoms (B,P, N,and S) doped CeO2: Challenging electrocatalysts for oxygen evolution reaction (OER) in alkaline medium

Increasing worldwide energy consumption has prompted considerable study into energy generation and energy storage systems in recent years. Chemical fuels may be produced efficiently via electrocatalytic water splitting, which uses electric and solar power. The development of efficient anodic electrocatalysts for efficient oxygen evolution reaction (OER) is a greater concern of present energy research. Cerium oxide (CeO₂) are promising electrocatalysts that exhibit outstanding OER but their reduced stability obstructs the practical application. A novel strategy was established to construct an effective catalyst of heteroatom (N, B, P and S) doped CeO₂ matrix were prepared. Moreover, the doping of heteroatoms into the CeO₂ matrix processes the improved electronic conductivity, reactive sites, increases the electrochemical catalytic activity, which enhances the water oxidation reaction. Consequently, well-suited alkaline electrolysers were brought together for water oxidation to ideal OER electrocatalytic activity. The OER activity of the electrocatalysts follows the order of S–CeO₂ (190 mV@10 mA cm⁻²), N– CeO₂ (220 mV @10 mA cm⁻²), P– CeO₂ (230 mV @10 mA cm⁻²), B–CeO₂ (250 mV @10 mA cm⁻²) and CeO₂ (260 mV @10 mA cm⁻²) in 1 M of KOH. From the kinetics analysis, Tafel slope value achieved for catalysts CeO₂, B–CeO_2, P–CeO₂, N–CeO₂ and S–CeO₂ are 142 mV dec⁻¹,121 mV dec⁻¹, 102 mV dec⁻¹, 98 mV dec⁻¹ and 83 mV dec⁻¹ respectively. These results validate that the S–CeO₂ electrode is prominent for OER performance with the requirement of cell voltage of 1.42 V at 10 mA cm⁻² current density. In addition, sulphur doped CeO₂ relatively have excellent stability through chrono-potentiometric analysis lasting for 20 h. Although the heteroatoms doped CeO₂ is acts as anode material, the preparation method is widespread, which will reduce the synthesis cost and streamline the preparation of electrode for OER. This research effort delivers a complete advantage for the development of robust, environmentally friendly and highly dynamic electrocatalysts for OER activity.     

Strategies for improving Co/Ni-based bimetal-organic framework to water splitting

The preparation of high-efficiency, stable, and low-cost oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) electrocatalysts remains a challenge for new energy systems. In this study, three-dimensional (3D) cobalt-nickel bimetal MOFs were used as precursors to synthesize catalysts through thermal decomposition, carbonization, nitriding, oxidation, phosphating, sulfurizing, and selenization, respectively. In 1.0 M KOH electrolyte, the overpotential of Co/Ni-MOFs@Se for OER was 238 mV and the that of Co/Ni-MOFs@P for HER was 194 mV at a current density of 10 mA cm⁻². Based on the excellent OER and HER performances of Co/Ni-MOFs@Se and Co/Ni-MOFs@P, these two materials were further assembled into electrodes for overall water splitting. Results showed that a potential of only 1.59 V was required to provide a current density of 10 mA cm⁻². The electrodes also exhibited long-term durability in a 2000 min stability test without significant changes in the catalytic performances. According to the difference in the doped non-metal elements, an electrode pair with a suitable matching degree was constructed, thereby improving the overall water splitting performance. Thus, the controllable modification of the metal-organic frameworks (MOFs)-derived carbon materials (CMs) effectively improved the materials’ catalytic water splitting performance. It was possible to further develop an efficient, inexpensive, and low-cost assembled electrode pair.