首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Refueling costs account for much of the fuel cost for light-duty hydrogen fuel-cell electric vehicles. We estimate cost savings for hydrogen dispensing if metal hydride (MH) storage tanks are used on board instead of 700-bar tanks. We consider a low-temperature, low-enthalpy scenario and a high-temperature, high-enthalpy scenario to bracket the design space. The refueling costs are insensitive to most uncertainties. Uncertainties associated with the cooling duty, coolant pump pressure, heat exchanger (HX) fan, and HX operating time have little effect on cost. The largest sensitivities are to tank pressure and station labor. The cost of a full-service attendant, if the refueling interconnect were to prevent self-service, is the single largest cost uncertainty. MH scenarios achieve $0.71–$0.75/kg-H2 savings by reducing compressor costs without incurring the cryogenics costs associated with cold-storage alternatives. Practical refueling station considerations are likely to affect the choice of the MH and tank design.  相似文献   

2.
Three-stage cascade storage systems are widely adopted in hydrogen refueling stations. Their volume ratio has a remarkable impact on the performance of refueling systems. In this study, a thermodynamic model that considers the complete refueling–recovery process is developed. The effects of volume ratio on the utilization ratio and the specific energy consumption of the model is investigated, and the optimization of the volume ratio is explored and discussed. The utilization ratio decreases with the increase in the proportion of low-pressure stage volume (pLP), and a proper volume of medium-pressure stage improves the utilization ratio. The specific energy consumption decreases as pLP increases when the stationary storage capacity is relatively small. However, when the stationary storage capacity is relatively large, the specific energy consumption does not decrease monotonically, and a low specific energy consumption and a high utilization ratio can be simultaneously obtained at low pLP.  相似文献   

3.
Hydrogen infrastructure is expanding. Mobile hydrogen refueling stations are advantageous because they can be moved between locations to provide refueling. However, there are serious concerns over the risk of various accident scenarios as the refueling stations are transported. In this study, we conduct a quantitative risk assessment of a mobile hydrogen refueling station. Risks that may occur at two refueling locations and the transport path between them are analyzed. Our evaluation reveals that risks are mostly in an acceptable zone and to a lesser degree in a conditionally acceptable zone. The greatest single risk factor is an accident resulting from the rupture of the tube trailer at the refueling site. At sites with no tube trailer and during the transport, the risk is greatest from large leaks from the dispenser or compressed gas facility. The mobile hydrogen refueling station can be safely built within acceptable risk levels.  相似文献   

4.
Fuel cell vehicles using green hydrogen as fuel can contribute to the mitigation of climate change. The increasing utilization of those vehicles creates the need for cost efficient hydrogen refueling stations. This study investigates how to build the most cost efficient refueling stations to fuel small fleet sizes of 2, 4, 8, 16 and 32 fuel cell busses. A detailed physical model of a hydrogen refueling station was built to determine the necessary hydrogen storage size as well as energy demand for compression and precooling of hydrogen. These results are used to determine the refueling costs for different station configurations that vary the number of storage banks, their volume and compressor capacity.It was found that increasing the number of storage banks will decrease the necessary total station storage volume as well as energy demand for compression and precooling. However, the benefit of adding storage banks decreases with each additional bank. Hence the cost for piping and instrumentation to add banks starts to outweigh the benefits when too many banks are used. Investigating the influence of the compressor mass flow found that when fueling fleets of 2 or 4 busses the lowest cost can be reached by using a compressor with the minimal mass flow necessary to refill all storage banks within 24 h. For fleets of 8, 16 and 32 busses, using the compressor with the maximum investigated mass flow of 54 kg/h leads to the lowest costs.  相似文献   

5.
Hydrogen is an excellent alternative energy source, particularly for vehicles. Despite the expansion of a considerable number of infrastructures, such as hydrogen refueling stations, there is a lack of efficient inspection methods for monitoring the hydrogen fuel quality. In this study, a hydrogen impurity analyzer (HIA) based on mobile gas chromatography with a thermal conductivity detector is developed and evaluated for the quality assurance of hydrogen fuel. Accordingly, O2, N2, and Ar which help in monitoring air leaks at hydrogen refueling stations, and CH4, which can also be detected by HIA, are selected as target impurities. The HIA reached limits of detection of 2.93, 0.72, 0.84, and 1.54 μmol/mol for O2, Ar, N2, and CH4, respectively. Moreover, the ISO 14687 requirements are satisfied with respective HIA expanded uncertainties of 2.6, 8.7, 8.2, and 9.4% (coverage factor k = 2). The developed system is ISO-compliant and offers enhanced mobility for online inspections.  相似文献   

6.
The future success of fuel cell electric vehicles requires a corresponding infrastructure. In this study, two different refueling station concepts for fuel cell passenger cars with 70 MPa technology were evaluated energetically. In the first option, the input of the refueling station is gaseous hydrogen which is compressed to final pressure, remaining in gaseous state. In the second option, the input is liquid hydrogen which is cryo-compressed directly from the liquid phase to the target pressure. In the first case, the target temperature of −33 °C to −40 °C [1] is achieved by cooling down. In the second option, gaseous deep-cold hydrogen coming from the pump is heated up to target temperature. A dynamic simulation model considering real gas behavior to evaluate both types of fueling stations from an energetic perspective was created. The dynamic model allows the simulation of boil-off losses (liquid stations) and standby energy losses caused by the precooling system (gaseous station) dependent on fueling profiles. The functionality of the model was demonstrated with a sequence of three refueling processes within a short time period (high station utilization). The liquid station consumed 0.37 kWh/kg compared to 2.43 kWh/kg of the gaseous station. Rough estimations indicated that the energy consumption of the entire pathway is higher for liquid hydrogen. The analysis showed the high influence of the high-pressure storage system design on the energy consumption of the station. For future research work the refueling station model can be applied to analyze the energy consumption dependent on factors like utilization, component sizing and ambient temperature.  相似文献   

7.
Development of efficient hydrogen refueling station (HRS) is highly desirable to reduce the hydrogen cost and hence the life cycle expense of fuel cell vehicles (FCVs), which is hindering the large scale application of hydrogen mobility. In this work, we demonstrate the optimization of gaseous HRS process and control method to perform fast and efficient refueling, with reduced energy consumption and increased daily fueling capacity. The HRS was modeled with thermodynamics using a numerical integration method and the accuracy for hydrogen refueling simulation was confirmed by experimental data, showing only 2 °C of temperature rise deviation. The refueling protocols for heavy duty FCVs were first optimized, demonstrating an average fueling rate of 2 kg/min and pre-cooling demand of less than 7 kW for 35 MPa type III tanks. Fast refueling of type IV tanks results in more significant temperature rise, and the required pre-cooling temperature is lowered by 20 K to achieve comparable fueling rate. The station process was also optimized to improve the daily fueling capacity. It is revealed that the hydrogen storage amount is cost-effective to be 25–30% that of the nominal daily refueling capacity, to enhance the refueling performance at peak time and minimize the start and stop cycles of compressor. A novel control method for cascade replenishment was developed by switching among the three banks in the order of decreased pressure, and results show that the daily refueling capacity of HRS is increased by 5%. Therefore, the refueling and station process optimization is effective to promote the efficiency of gaseous HRS.  相似文献   

8.
For this study, a spatially and temporally resolved optimization model was used to investigate and economically evaluate pathways for using surplus electricity to cover positive residual loads by means of different technologies to reconvert hydrogen into electricity. The associated technology pathways consist of electrolyzers, salt caverns, hydrogen pipelines, power cables, and various technologies for reconversion into electricity. The investigations were conducted based on an energy scenario for 2050 in which surplus electricity from northern Germany is available to cover the electricity grid load in the federal state of North Rhine-Westphalia (NRW).A key finding of the pathway analysis is that NRW's electricity demand can be covered entirely by renewable energy sources in this scenario, which involves CO2 savings of 44.4 million tons of CO2/a in comparison to the positive residual load being covered from a conventional power plant fleet. The pathway involving CCGT (combined cycle gas turbines) as hydrogen reconversion option was identified as being the most cost effective (total investment: € 43.1 billion, electricity generation costs of reconversion: € 176/MWh).Large-scale hydrogen storage and reconversion as well as the use of the hydrogen infrastructure built for this purpose can make a meaningful contribution to the expansion of the electricity grid. However, for reasons of efficiency, substituting the electricity grid expansion entirely with hydrogen reconversion systems does not make sense from an economic standpoint. Furthermore, the hydrogen reconversion pathways evaluated, including large-scale storage, significantly contribute to the security of the energy supply and to secured power generation capacities.  相似文献   

9.
This study aims to find the evidence that polyethylene terephthalate (PET) is pertinent, with respect to the risk of thermal degradation during fueling, as a liner material of a type-4 composite cylinder for storing 6.8 L of compressed hydrogen. In particular, one type-4 cylinder with the PET liner of thickness 0.6 mm and one type-3 cylinder for comparison have simultaneously undergone 6 cycles of fast fueling (0.15 MPa/s) and fast defueling (0.55 MPa/s) with hydrogen gas in the range of 2 to 45 MPa. The hydrogen temperatures in cylinders, which were measured by a specially-devised thermocouple inserted in each cylinder, change within the range of ?30.0 to 70.0 °C. Although the temperature in the type-4 cylinder rises higher than that in the type-3 cylinder due to the lower heat conductivity of PET, it does not exceed 85 °C, which is the limit set by the international standards, EC No. 79. Furthermore, from the measurements of the deformation by the laser displacement sensors, the type-4 cylinder swells less than the type-3 cylinder. The pressure-displacement analysis shows that the deformation of type-4 cylinders occurs reversibly, i.e., defueling makes the cylinder regain its previous shape. In essence, PET is safe against thermal degradation when applied as a liner of a 6.8 L type-4 cylinder for hydrogen storage.  相似文献   

10.
Hydrogen has the highest gravimetric energy density of all fuels; however, it has a low volumetric energy density, unfavorable for storage and transportation. Hydrogen is usually liquefied to meet the bulk transportation needs. The exothermic interconversion of its spin isomers is an additional activity to an already energy-intensive process. The most significant temperature drop occurs in the precooling cycle (between ?150 °C and up to ?180 °C) and consumes more than 50% of the required energy. To reduce the energy consumption and improve the exergy efficiency of the hydrogen liquefaction process, a new high-boiling component, Hydrofluoroolefin (HFO-1234yf), is added to the precooled mixed refrigerant. As a result, the specific energy consumption of precooling cycle reduces by 41.8%, from 10.15 kWh/kgLH2 to 5.90 kWh/kgLH2, for the overall process. The exergy efficiency of the proposed case increases by 43.7%; however, the total equipment cost is also the highest. The inflated cost is primarily due to the added ortho-to-para hydrogen conversion reactor, boosting the para-hydrogen concentration. From the perspective of bulk storage and transportation of liquid hydrogen, the simplicity of design and low energy consumption build a convincing case for considering the commercialization of the process.  相似文献   

11.
Mine sites are an ideal candidate to be decarbonised through the installation of variable renewables and storage. However, the operation of mine sites is dependent on many factors, including mineral price, which can vary significantly, leading to periods of inactivity. Therefore, for sites that have invested in renewable generation and storage, there exists a potential of stranded assets, which negatively impact their business case, potentially reducing investment in such equipment and, therefore, decarbonisation potential. The current study therefore has investigated the potential of using variable renewable energy coupled with thermal energy storage and biodiesel to supply heat to a mine site. With the base case established, the economic impact of lower or no mine operations on the net present value were evaluated. To reduce the impact of mine turndown, the potential of installing a hydrogen production facility in an effort to utilise the stranded assets was also undertaken. Preliminary results show the base case to be very economical with a net present cost of $151.4 M after 30 operational years. This value was reduced to $45.7 M and -$81.1 M if the mine only operated at half capacity or did not operate at all, respectively. The addition of hydrogen production powered by the installed variable renewable generation resulted in a slightly better net present value of $174.7 M if the mine operated as normal for 30 years. For the two other cases, the installation of an electrolyser resulted in significantly better results than if it had not been installed for the half capacity and no operation cases with net present costs of $90.9 M and -$7.1 M, respectively. A sensitivity analysis on these results show that while the hydrogen production only plays a minor role in site savings, a price of between $1.1/kg to $2.0/kg is necessary for the system to be economically justifiable. Therefore, the current study shows that the addition of an electrolyser can significantly reduce the risk of stranded assets in fully renewable mine sites by providing an additional revenue stream during mine turndown events.  相似文献   

12.
Hydrogen fueling stations are emerging around and in larger cities in Europe and United States together with a number of hydrogen vehicles. The most stations comply with the refueling protocol made by society of automotive engineers and they use a cascade fueling system on-site for filling the vehicles. The cascade system at the station has to be refueled as the tank sizes are limited by the high pressures. The process of filling a vehicle and afterward bringing the tanks in refueling station back to same pressures, are called a complete refueling cycle. This study analyzes power consumption of refueling stations as a function of number of tanks, volume of the tanks and the pressure in the tanks. This is done for a complete refueling cycle. It is found that the energy consumption decreases with the number of tanks approaching an exponential function. The compressor accounts for app. 50% of the energy consumption. Going from one tank to three tanks gives an energy saving of app. 30%. Adding more than four tanks the energy saving per extra added tank is less than 4%. The optimal numbers of tanks in the cascade system are three or four.  相似文献   

13.
With the goal of building 310 hydrogen refueling stations (HRSs) in Korea by 2022, restrictions, such as location restrictions and separation distances, are being eased, so developing ways to improve technology and safety. As HRSs contain major facilities such as compressors, storage tanks, dispenser, and priority control panels, and a leakage could result in a large fire or explosion caused by an ignition source. To perform quantitative risk assessment, programs, namely, Hy-KoRAM and Phast/Safeti were used in this study. It could determine the damage range and effect on radiant heat and flame length, as well as personal and societal risks, using these programs. The crossanalysis of the two programs also improves the facility's safety and the reliability of the results.  相似文献   

14.
This paper examines the current state of the art of hydrogen refuelling stations-based production and storage systems for fuel cell hybrid electric vehicles (FCHEV). Nowadays, the emissions are increasing rapidly due to the usage of fossil fuels and the demand for hydrogen refuelling stations (HRS) is emerging to replace the conventional vehicles with FCHEVs. Hence, the availability of HRS and its economic aspects are discussed. In addition, a comprehensive study is presented on the energy storage systems such as batteries, supercapacitors and fuel cells which play a major role in the FCHEVs. An energy management system (EMS) is essential to meet the load requirement with effective utilisation of power sources with various optimizing techniques. A detailed comparative analysis is presented on the merits of Reinforcement learning (RL) for the FCHEVs. The significant challenges are discussed in depth with potential solutions for future work.  相似文献   

15.
In this study, demonstration of a one-stage metal hydride hydrogen compressor (MH compressor) by using a BCC alloy was performed. It was estimated that V40Ti22Cr38 could compress approximately 1.6 wt% of hydrogen from 1.0 to 10 MPa in 20–140 °C temperature range from equilibrium theory via pressure-composition-isotherm measurements. For demonstration of an actual MH compressor, a kg-scale experimental system was set up; V40Ti22Cr38 (1.4 kg) was introduced into a 1-inch cylindrical vessel with a heat-medium flow tube outside. As a result, 1.0 MPa of hydrogen can be compressed into the hydrogen cylinder at >10 MPa by hydrogen absorption at 10 °C and desorption at 160 °C for 30 min each (1 cycle/h) to achieve a compression rate of 0.23 Nm3/h and indicate the potential of the practical MH compressors by using BCC alloy.  相似文献   

16.
The need for a rapid transformation to low-carbon economies has rekindled hydrogen as a promising energy carrier. Yet, the full range of environmental consequences of large-scale hydrogen production remains unclear. Here, prospective life cycle analysis is used to compare different options to produce 500 Mt/yr of hydrogen, including scenarios that consider likely changes to future supply chains. The resulting environmental and human health impacts of such production levels are further put into context with the Planetary Boundaries framework, known human health burdens, the impacts of the world economy, and the externality-priced production costs that embody the environmental impact. The results indicate that climate change impacts of projected production levels are 3.3–5.4 times higher than the allocated planetary boundary, with only green hydrogen from wind energy staying below the boundary. Human health impacts and other environmental impacts are less severe in comparison but metal depletion and ecotoxicity impacts of green hydrogen deserve further attention. Priced-in environmental damages increase the cost most strongly for blue hydrogen (from ~2 to ~5 USD/kg hydrogen), while such true costs drop most strongly for green hydrogen from solar photovoltaic (from ~7 to ~3 USD/kg hydrogen) when applying prospective life cycle analysis. This perspective helps to evaluate potentially unintended consequences and contributes to the debate about blue and green hydrogen.  相似文献   

17.
Heavy fossil fuels consumption has raised concerns over the energy security and climate change while hydrogen is regarded as the fuel of future to decarbonize global energy use. Hydrogen is commonly used as feedstocks in chemical industries and has a wide range of energy applications such as vehicle fuel, boiler fuel, and energy storage. However, the development of hydrogen energy in Malaysia is sluggish despite the predefined targets in hydrogen roadmap. This paper aims to study the future directions of hydrogen economy in Malaysia considering a variety of hydrogen applications. The potential approaches for hydrogen production, storage, distribution and application in Malaysia have been reviewed and the challenges of hydrogen economy are discussed. A conceptual framework for the accomplishment of hydrogen economy has been proposed where renewable hydrogen could penetrate Malaysia market in three phases. In the first phase, the market should aim to utilize the hydrogen as feedstock for chemical industries. Once the hydrogen production side is matured in the second phase, hydrogen should be used as fuel in internal combustion engines or burners. In the final phase hydrogen should be used as fuel for automobiles (using fuel cell), fuel-cell combined heat and power (CHP) and as energy storage.  相似文献   

18.
Metal organic framework (MOF) are widely used in adsorption and separation due to their porous nature, high surface area, structural diversity and lower crystal density. Due to their exceptional thermal and chemical stability, Cu-based MOF are considered excellent hydrogen storage materials in the world of MOFs. Efforts to assess the effectiveness of hydrogen storage in MOFs with molecular simulation and theoretical modeling are crucial in identifying the most promising materials before extensive experiments are undertaken. In the current work, hydrogen adsorption in four copper MOFs namely, MOF-199, MOF 399, PCN-6′, and PCN-20 has been analyzed. These MOFs have a similar secondary building unit (SBU) structure, i.e., twisted boracite (tbo) topology. The Grand Canonical Monte Carlo (GCMC) simulation was carried at room temperature (298 K) as well as at cryogenic temperature (77 K) and pressures ranging from 0 to 1 bar and 0–50 bar. These temperatures and pressure were selected to comply with the conditions set by department of energy (DOE) and to perform a comparative study on hydrogen adsorption at two different temperatures. The adsorption isotherm, isosteric heat, and the adsorption sites were analyzed in all the MOFs. The findings revealed that isosteric heat influenced hydrogen uptake at low pressures, while at high pressures, porosity and surface area affected hydrogen storage capacity. PCN-6′ is considered viable material at 298 K and 77 K due to its high hydrogen uptake.  相似文献   

19.
High-purity standards are required for hydrogen used in fuel cell vehicles. The relative abundance of contaminants is highly influenced by the production pathway. Hydrogen obtained from water electrolysis presents three main pollutants: Nitrogen, Oxygen and Water. Herein, the engineering and implementation of removal techniques in a commercial 50 kW alkaline electrolyzer are reported. The full system was characterized with various analytical techniques including gas chromatography and mass spectrometry. A reduction of contaminant levels compatible with ISO 14687:2019 standard was achieved. From cold start, 100 min of operation are required to reach the desired nitrogen levels. Oxygen was removed in one step with a catalytic converter. Drying of hydrogen was achieved by using an innovative vacuum assisted pressure swing adsorption system. Sub-ppm levels of water are obtained with a power consumption of only 0.5 kWh/kg H2 and 98.4% of product recovery.  相似文献   

20.
In this paper, the performance of a solar gas turbine (SGT) system integrated to a high temperature electrolyzer (HTE) to generate hybrid electrical power and hydrogen fuel is analyzed. The idea behind this design is to mitigate the losses in the electrical power transmission and use the enthalpy of exhaust gases released from the gas turbine (GT) to make steam for the HTE. In this context, a GT system is coupled with a solar tower including heliostat solar field and central receiver to generate electrical power. To make steam for the HTE, a flameless boiler is integrated to the SGT system applying the SGT extremely high temperature exhaust gases as the oxidizer. The results indicate that by increasing the solar receiver outlet temperature from 800 K to 1300 K, the solar share increases from 22.1% to 42.38% and the overall fuel consumption of the plant reduces from 7 kg/s to 2.7 kg/s. Furthermore, flameless mode is achievable in the boiler while the turbine inlet temperature (TIT) is maintained at the temperatures higher than 1314 K. Using constant amounts of the SGT electrical power, the HTE voltage decreases by enhancing the HTE steam temperature which result in the augmentation of the overall hydrogen production. To increase the HTE steam temperature from 950 K to 1350 K, the rate of fuel consumption in the flameless boiler increases from 0.1 m/s to 0.8 m/s; however, since the HTE hydrogen production increases from 4.24 mol/s to 16 mol/s it can be interpreted that the higher steam temperatures would be affordable. The presented hybrid system in this paper can be employed to perform more thermochemical analyses to achieve insightful understanding of the hybrid electrical power-hydrogen production systems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号