首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The development of high-performance and stable trifunctional electrocatalysts is a pressing challenge for the practical application of water splitting and regenerative Zn-air batteries. Herein, bamboo-like N-doped carbon tubes encapsulated Co2P–Fe2P nanoparticles (CoFe-PN/C) was fabricated via a facile template-sacrificial approach by using CoZn-ZIF trapping Fe3+ (CoFeZn/C) as the precursor. The incorporation of Fe3+ was achieved by the one-pot synthesis approach during crystallization of ZIF, which led to the generation of the unique bamboo-like tube structure under the condition of simultaneous phosphating and carbonization. Benefiting from the large surface area, the optimized electronic structure of active sites and the unique bamboo-like nanotube, the resultant CoFe-PN/C can be used as the trifunctional electrocatalyst possessing a small overpotential at 10 mA cm−2 for the HER (178 mV) and OER (300 mV), as well as a high half-wave potential of 0.884 V for ORR (40 mV more positive than that of commercial 20 wt% Pt/C). Moreover, the self-designed CoFe-PN/C||CoFe-PN/C alkaline electrolyzer driving 50 mA cm−2 only need operating potential of 1.84 V and the maximum discharge power density of the CoFe-PN/C-assembled ZABs could achieve 152.0 mW cm−2, superior to those of Pt/RuO2 couple. This work will facilitate the development and application of trifunctional electrocatalysts based on bi-transition metallic phosphides for energy conversion and storage technology.  相似文献   

2.
Seeking a multifunctional electrocatalyst composed of earth-abundant elements for highly hydrogen and oxygen evolution reaction and oxygen reduction reaction (HER, OER and ORR) is technically imperative for the electrocatalytic applications. Herein, we report HER, OER and ORR electrocatalytic performances of metal-organic framework (MOF) derived cobalt nanoparticles encapsulated in nitrogen-doped carbon and carbon nanotube (Co@NC/CNT). The optimized Co@NC/CNT hybrid shows superior HER and OER activities with a small overpotential of 137 mV and 302 mV at a current density of 10 mA cm−2, respectively. Furthermore, the Co@NC/CNT as an air-cathode in secondary Zn-air battery demonstrates a confined potential gap of 0.88 V over 200 h and a maximum power density of 53.4 mW cm−2, which are much better than those of Pt/C. The outstanding performances are attributed to the synergistic effects from Co, and N embedded into carbon and CNT. More importantly, the unique surface structure contributes to expose many active sites for superior catalytic activity through allowing a large number of electrons. These outcomes not only prove a facile approach for the preparation of metals/carbon hybrid but also disclose its huge possible as a multifunctional electrocatalyst for sustainable energy systems.  相似文献   

3.
Developing non-precious metal catalysts for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is crucial for proton exchange membrane fuel cell (PEMFC), metal-air batteries and water splitting. Here, we report a in-situ simple approach to synthesize ultra-small sized transition metal carbides (TMCs) nanoparticles coupled with nitrogen-doped carbon hybrids (TMCs/NC, including WC/NC, V8C7/NC and Mo2C/NC). The TMCs/NC exhibit excellent ORR and HER performances in acidic electrolyte as bi-functional catalysts. The potential of WC/NC at the current density of 3.0 mA cm?2 for ORR is 0.814 V (vs. reversible hydrogen electrode (RHE)), which is very close to Pt/C (0.827 V), making it one of the best TMCs based ORR catalysts in acidic electrolyte. Besides, the TMCs/NC exhibit excellent performances toward HER, the Mo2C/NC only need an overpotential of 80 mV to drive the current density of 10 mA cm?2, which is very close to Pt/C (37 mV), making it the competitive alternative candidate among the reported non-precious metal HER catalysts.  相似文献   

4.
Physical mixing of monofunctional noble metal catalysts, such as Pt/C or Ru/IrO2, increases the commercial cost and stability risk of electrodes. Therefore, it is desirable to develop a multifunctional electrocatalyst for zinc-air batteries and integrated electrolytic devices. To develop an effective way to fabricate high-performance multifunctional electrocatalysts by modifying advanced nanostructures, a coaxial electrospinning approach with in-situ synthesis and subsequent carbonization was used to construct a highly integrated three-function catalyst composed of graphitic carbon-encapsulated cobalt nanoparticles embedded into one-dimensional (1D) porous hollow carbon nanofibers (CoNC-HCNFs). Under the synergistic effect of the active material and the advanced nanostructure, the as-prepared CoNC-HCNFs demonstrated an operating overpotential of 186 mV (10 mA cm?2) for the hydrogen evolution reaction (HER), a half-wave potential of 0.83 V (vs. RHE at 10 mA cm?2) for the oxygen reduction reaction (ORR), and a potential of 1.58 V (10 mA cm?2) for the oxygen evolution reaction (OER). With their exceptional multifunctional activities, two CoNC–HCNF-based aqueous zinc-air batteries (ZABs) in series could drive an alkaline water electrolyzer for splitting water. Furthermore, due to the superior mechanical flexibility and rechargeability of the solid-state ZAB, it has great application prospects in powering portable and wearable electronics. This research is expected to offer inspiration for the development of other excellent MOF-based hollow carbon nanofibers and to enable them to be adopted more widely in electrochemical energy conversion and energy storage.  相似文献   

5.
Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the core reaction processes of rechargeable Zn-air battery (ZAB) cathode. Therefore, exploring a bifunctional catalyst with excellent electrochemical performance, high durability, and low cost is essential for rechargeable ZAB. In this work, amino functionalized carbon nanotubes supported core/shell nanoparticles composed of CoNi alloy core and CoO–NiO shell (CoNi@CoO–NiO/NH2-CNTs-1) is synthesized through a simple and efficient hydrothermal reaction and calcination method, which shows higher ORR/OER bifunctional catalytic performance than the single metal-based catalyst, such as Ni@NiO/NH2-CNTs and Co@CoO/NH2-CNTs. The fabricated bimetallic alloy based catalyst CoNi@CoO–NiO/NH2-CNTs-3 with the optimized loading content of CoNi@CoO–NiO core/shell nanoparticles, presents the best bifunctional catalytic performance for ORR/OER. Experimental studies reveal that CoNi@CoO–NiO/NH2-CNTs-3 exhibits the onset potential of 0.956 V and 1.423 V vs. RHE for ORR and OER, respectively. It also exhibits a low overpotential of 377 mV to achieve a 10 mA cm?2 current density for OER, and positive half-wave potentials of 0.794 V for ORR. And the potential difference between half-wave potential of ORR (E1/2) and the potential at 10 mA cm?2 for OER (Ej10) is 0.813 V. In addition, when CoNi@CoO–NiO/NH2-CNTs-3 is used as an air electrode catalyst of rechargeable ZAB, its maximum power density and open circuit voltage (OCV) can reach 128.7 mW cm?2 and 1.458 V (The commercially available catalyst of Pt/C–RuO2 is 88.1 mW cm?2), which strongly demonstrates that the fabricated catalyst CoNi@CoO–NiO/NH2-CNTs-3 can be used as a highly efficient bifunctional catalyst for ZABs, and is expected to replace those expensive precious metal electrocatalysts to meet the growing demand for new energy devices.  相似文献   

6.
As a promising and cost-efficient alternative to noble metal catalysts, transition metal phosphides (TMPs) show highly catalytic performance toward oxygen reduction and evolution reactions (ORR and OER). Mesoporous carbon-coated nickel phosphide (NiP) nanoparticles were successfully synthesized by thermal decomposition at 500 °C under N2/H2 (95:5) atmosphere. The NiP/C hybrid exhibits excellent OER/ORR activity. It can generate an OER current density of 10 mA cm?2 at the overpotential of 0.26 V with a low Tafel slope of 43 mV dec?1, and produce a limited ORR current density of 5.10 mA cm?2 at 1600 rpm with a half-wave potential of 0.82 V via a 4-electron pathway. In addition, the OER/ORR catalytic currents remain considerable stable without significant loss for more than 25 h polarization. This work will open up a new avenue to design a bifunctional catalyst with a superior OER/ORR activity and stability, and this cost-efficient strategy will pave the way for the industrial application of the renewable energy technologies.  相似文献   

7.
Ba0.5Sr0.5Co0.8Fe0.2O3 perovskite oxide has been synthesized by a sol–gel method, and characterized by XRD, SEM, BET. This oxide has a porous structure and a specific surface area of 2.78 m2 g−1. The catalytic activity of the oxide for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in 0.1 M KOH solution has been studied by using a rotating ring-disk electrode (RRDE) technique. RRDE results show that the ORR mainly favors a direct four electron pathway, and a maximum cathodic current density of 6.25 mA cm−2 at 2500 rpm was obtained, which is close to the behavior of Pt/C (20 wt% Pt on carbon) electrocatalyst in the same testing conditions. Compared with pure C electrode, BSCF is more active for OER, a lower onset potential for OER and a bigger anodic current at the same applied potential are observed.  相似文献   

8.
One-dimensional (1D) nanofiber structure of electrocatalyst has attracted increasing attention in oxygen evolution/reduction reactions (OER/ORR) owing to its unique structural properties. Here, MIL-53(Fe) and Ni(NO3)2·6H2O are incorporated into the electrospun carbon nanofibers (CNFs) to prepare the nickel-iron spinel-based catalysts (Fe2O3/NiFe2O4@CNFs) with 1D and porous structure. The marked Fe2O3/NiFe2O4@CNFs-2 catalyst has a tube diameter of approximately 300 nm, a high surface area of 282.4 m2 g?1 and a hydrophilic surface (contact angle of 16.5°), which obtains a promising bifunctional activity with ΔE = 0.74 V (E1/2 = 0.84 V (ORR) and Ej10 = 1.58 V (OER)) in alkaline media. Fe2O3/NiFe2O4@CNFs-2 has a higher catalytic stability (93.35%) than Pt/C (89.36%) for 30,000 s tests via an efficient 4e? ORR pathway. For OER, Fe2O3/NiFe2O4@CNFs-2 obtains a low overpotential of 350 mV and a high Faraday efficiency of 92.7%. NiFe2O4 (Ni2+ in tetrahedral position) relies on its variable valence states (NiOOH and/or FeOOH) to obtain good catalytic activity and stability for OER, while CNFs wrap/protect the active components (Fe–N and graphic N) in the carbon skeleton to effectively improve the charge transfer (conductivity), activity and stability for ORR. Porous 1D nanofiber structure provides abundant smooth pathways for mass transfer. It indicates that the bimetallic active substances can promote bifunctional activity by synergistically changing the oxide/spinel interface structure.  相似文献   

9.
Electrochemical reactions such as the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and methanol oxidation reaction (MOR) are essential for energy conversion applications such as water electrolysis and fuel cells. Furthermore, Pt or Ir-related materials have been extensively utilized as electrocatalysts for the OER, ORR, and MOR. To reduce the utilization of precious metals, innovative catalyst structures should be proposed. Herein, we report a bi-metallic phosphide (Ni2P and PdP2) structure surrounded by graphitic carbon (Ni–Pd–P/C) with an enhanced electrochemical activity as compared to conventional electrocatalysts. Despite the low Pd content of 3 at%, Ni–Pd–P/C exhibits a low overpotential of 330 mV at 10 mA cm?2 in the OER, high specific activity (2.82 mA cm?2 at 0.8 V) for the ORR, and a high current density of 1.101 A mg?1 for the MOR. The superior electrochemical performance of Ni–Pd–P/C may be attributed to the synergistic effect of the bi-metallic phosphide structure and core-shell structure formed by graphitic carbon.  相似文献   

10.
It is highly desirable to develop high-efficiency non-precious electrocatalysts toward oxygen reduction reaction (ORR). In this work, Fe2O3-encapsulated and Fe-Nx-containing porous carbon spheres (Fe2O3/N-MCCS) with unique multi-cage structures and high specific surface area (1360 m2 g?1) are fabricated. The unique porous structure of Fe2O3/N-MCCS ensures fast transportation of oxygen during ORR. The combined effect of Fe2O3 nanoparticles and Fe-Nx configurations endows Fe2O3/N-MCCS (E1/2 = 0.837 V vs. RHE) with superior ORR activity and methanol tolerance to Pt/C. And, Fe2O3/N-MCCS exhibits better stability than nitrogen-modified carbon. The characterization results of Fe2O3/N-MCCS after long-term test reveals its excellent structural stability. Impressively, zinc-air battery based on Fe2O3/N-MCCS showed a peak power density of 132.4 mW cm?2 and a specific capacity of 797 mAh g?1, respectively.  相似文献   

11.
Co nanoparticles with uniform size (about 5 nm) embedded in N-doped graphene (Co-NG) were explored in this work. The introduction of a second carbon source of citric acid during synthesis prevented the Co atoms from growing up, thus regulating the size of the cobalt nanoparticles. N atoms in N-doped graphene had more lone-pair electrons, making it easier to capture electrons from hydrated ions, and facilitating the dynamics procedure of HER. Furthermore, N dopant rendered larger positive charge density on the adjacent carbon atoms, which was conducive to OER and HER. At 10 mA cm?2 of the current density, the Co-NG/CC catalyst's overvoltage of HER was 78 mV, approaching that of 20% Pt/C (59 mV), an efficient precious metal electrocatalyst for HER, while its overvoltage of OER was about 225 mV, 12.5% lower than that of RuO2 (257 mV, a common precious metal oxide OER electrocatalyst). In addition, this Co-NG/CC composite bifunctional catalyst displayed good electrochemical stability in alkali solution and might be designed as a dual-function catalyst in the application of overall water splitting. The cell voltage of Co-NG/CC//Co-NG/CC was only 1.66 V, approaching to that of full precious metal cell of Pt/C//RuO2 (1.52 V), and revealing the good commercial application prospects of this composite bifunctional catalyst.  相似文献   

12.
Perovskite oxides are widely regarded as the promising air electrode catalytic materials for zinc-air batteries (ZABs). In the present work, A-site Y and B-site Fe co-doped La0.85Y0.15Ni0.7Fe0.3O3 perovskite catalyst was prepared by self-propagating high-temperature synthesis, and this material was evaluated as a bifunctional electrocatalyst for ZABs. The effect of co-doping on crystal structure and reaction activities, which can promote oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), was investigated. Results show that Y and Fe co-doping substantially improved the ORR and OER of LaNiO3. In comparison with LaNiO3, the ORR performance of La0.85Y0.15Ni0.7Fe0.3O3 exhibited a higher limiting current density (3.8 mA cm?2 at 0.4 V vs. RHE) and more positive onset potential (0.75 V vs. RHE) at 1600 rpm. It also had an excellent OER performance of 1.74 V vs. RHE at 10 mA cm?2. When La0.85Y0.15Ni0.7Fe0.3O3 was used as an air electrode catalyst for ZABs, it exhibited a high power density of 93.6 mW cm?2, which increased by 84.8% compared with that of LaNiO3. Moreover, the full cell with La0.85Y0.15Ni0.7Fe0.3O3 air electrode catalyst was operated for more than 80 h, maintaining good stability. Therefore, La0.85Y0.15Ni0.7Fe0.3O3 can be used as a promising bifunctional air electrode catalyst for ZABs. The characterization analysis reveals that A-site Y and B-site Fe co-doped catalyst transforms crystal structure from trigonal system to cubic system, retain the valence state of Ni3+ and increases the contents of O22?/O?, and these properties are more conducive for LaNiO3 catalysis.  相似文献   

13.
Developing cost-effective and remarkable electrocatalysts toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performs excelling role in boosting the hydrogen energy application. Herein, a novel in-situ one-pot strategy is developed for the first time to synthesize molybdenum carbide nanoparticles (Mo2C NPs) incorporated on nitrogen (N) and phosphorous (P) co-doped stereotaxically carbon (SC). The optimized Mo2C NPs/N, P–SC–800 electrocatalyst exhibits lower overpotentials of 131 and 287 mV for HER and OER to deliver a current density of 10 mA cm?2 in 1.0 M KOH medium with smaller Tafel slopes of 58.9 and 74.4 mV/dec, respectively. In addition, an electrolyzer using Mo2C NPs/N, P–SC–800 electrode as cathode and anode delivers a current density of 10 mA cm?2 at a small voltage of 1.64 V for overall water splitting. The excellent water splitting performance could be ascribed to optimum Mo2C NPs for more accessible active sites, highly active N, P-SC networks for accelerated electron transfers, and synergetic effect between Mo2C NPs and N, P-SC networks. The N, P-SC network not only enhances the overall dispersion of Mo2C NPs but also contributes numerous electroactive edges to enhance the performance of HER, OER, and overall water splitting activity. This research work explores the in-situ one-step strategies of advanced, cost-effective, and non-precious metal electrocatalysts for efficient water splitting and motivates the consideration of a novel class of heteroatom doped stereotaxically carbon nanocomposites for sustainable energy production.  相似文献   

14.
In order to reduce the cost of electrocatalysts and increase the exposure of the Ir active sites while ensuring the stability of the catalyst, a N-doped carbon nanotube (NCNT) is applied as a conductive support to confine the Ir clusters for avoiding them growing up via a modified method based on pyrolysis of a mixture of melamine, ferric chloride and iridium trichloride. It is found that Ir species in the as-obtained Ir(20)/Fe@NCNT-900 composite exist in two forms, Ir nanoclusters (1–2 nm) dotted on the wall of NCNT and the Ir atomically scattered on the Fe nanoparticles wrapped in the NCNT. Although the Ir content of Ir(20)/Fe@NCNT-900 is extremely low (~4 wt% Ir), the composite catalyst delivers excellent activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) with an exceptionally low overpotential of 4.7 mV/11 mV for HER and 300 mV/270 mV for OER to drive 10 mA cm?2 in 0.5 M H2SO4/1.0 M KOH electrolyte respectively, which exceeds the commercial Pt/C (20 wt% Pt) and IrO2 benchmarks. In addition, it has much higher mass activity for OER at 1.55 V (1.78 A mg?1Ir) than those of the referenced catalysts in acid. The cell voltage of the two-electrode system assembled by Ir(20)/Fe@NCNT-900 for total water splitting in acidic and alkaline media are only 1.520 V and 1.510 V to afford 10 mA cm?2 separately, lower than that of Pt/C||IrO2 and with a good stability. Our work provides a construction method of low-content precious metal composite catalysts which can be applied in OER and overall water splitting field.  相似文献   

15.
The hematite type Fe2O3/C catalyst for oxygen evolution reaction (OER) was prepared using a facile urea combustion method. The Fe2O3/C electrode showed excellent electrocatalytic ability towards OER in alkaline medium. The phase and morphology of the product were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The sintering temperature is 600 °C, and the calcination time is 3 h, which is the best preparation process condition. The particles were irregular spherical with the size of 10–30 nm and dispersed uniformly. The current density of the Fe2O3/C electrode was 147 mA cm−2 at 0.6 V (vs. HgO/Hg) in 6 mol L−1 KOH electrolyte at room temperature.  相似文献   

16.
Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS2/NiFeS2 heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS2/NiFeS2/NF catalyst achieves a 500 mA cm−2 current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS2/NiFeS2/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm−2, which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm−2, the MoS2/NiFeS2/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS2/NiFeS2/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm−2) far exceed the benchmark RuO2 and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.  相似文献   

17.
Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H2 for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm−2 at an overpotential of 302 mV and the HER with 10 mA cm−2 at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO2, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm−2 with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.  相似文献   

18.
Ba0.9Co0.5Fe0.4Nb0.1O3 (BCFN) perovskite has been synthesized by a solid-state reaction method, and characterized by XRD, SEM, BET. This oxide has a porous structure and a specific surface area of 10.24 m2 g−1 after ball-milled 24 h. The catalytic activity of the oxide for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in 0.1 M KOH solution has been studied by using a rotating ring-disk electrode (RRDE) technique. RRDE results show that the ORR mainly favors a direct four electron pathway, and a maximum cathodic current density of −5.70 mA cm−2 at 2500 rpm was obtained, which is close to that of Pt/C (20 wt.% Pt on carbon) electrocatalyst in the same testing conditions. Compared with behaviors of pure C and Pt/C electrode, a lower onset potential of BCFN for OER is observed, and a bigger anodic current at the same applied potential is obtained. Considering small surface area of the BCFN catalyst, a big overpotential is given in the discharge–charge curves. However, the outputs of 2032 coin Li–air batteries in a dry gas mixture composed of 80 vol.% pure N2 and 20 vol.% pure O2 demonstrated that BCFN could be a potential bifunctional catalyst for the Li–air battery.  相似文献   

19.
N–doped carbon confined FeNi alloys are promising candidate to noble Pt and IrO2 or RuO2 for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in rechargeable zinc-air batteries. However, it is difficult to control the distribution of transition metals in the precursor and electrocatalyst. Herein, we design a covalent organic polymer to realize the uniform distribution of metal, nitrogen and carbon precursors. The structure of the obtained electrocatalyst is FeNi nanoparticles coated with carbon shells dispersed on N-doped multilayer porous carbon (FeNi@NC). The resultant FeNi@NC delivered a half-wave potential for ORR of 0.878 V and a low potential of 1.59 V to achieve 10 mA cm?2 for OER, which surpasses commercial platinum/carbon and ruthenium dioxide. The outstanding bifunctional properties of FeNi@NC attribute to the synergistic coupling between N-doped carbon shells and dense FeNi nanoparticles. Moreover, the self-made zinc-air battery with FeNi@NC air-cathode displayed an excellent energy density of 137.7 mW cm?2 as well as cycling stability (100 h, 200 cycles).  相似文献   

20.
Developing non-precious metal-based catalysts as the substitution of precious catalysts (Pt/C) in oxygen reduction reaction (ORR) is crucial for energy devices. Herein, a template and organic solvent-free method was adopted to synthesize Fe, B, and N doped nanoflake-like carbon materials (Fe/B/N–C) by pyrolysis of monoclinic ZIF-8 coated with iron precursors and boric acid. Benefiting from introducing B into Fe–N–C, the regulated electron cloud density of Fe-Nx sites enhance the charge transfer and promotes the ORR process. The as-synthesized Fe/B/N–C electrocatalyst shows excellent ORR activity of a half-wave potential (0.90 V vs 0.87 V of Pt/C), together with superior long-term stability (95.5% current density retention after 27 h) in alkaline media and is even comparable to the commercial Pt/C catalyst (with a half-wave potential of 0.74 V vs 0.82 V of Pt/C) in an acidic electrolyte. A Zn-air battery assembled with Fe/B/N–C as ORR catalyst delivers a higher open-circuit potential (1.47 V), specific capacity (759.9 mA h g?1Zn at 10 mA cm?2), peak power density (62 mW cm?2), as well as excellent durability (5 mA cm?2 for more than 160 h) compared to those with commercial Pt/C. This work provides an effective strategy to construct B doped Fe–N–C materials as nonprecious ORR catalyst. Theoretical calculations indicate that introduction of B could induce Fe-Nx species electronic configuration and is favorable for activation of OH1 intermediates to promote ORR process.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号