Walnut shell-derived hierarchical porous carbon with high performances for electrocatalytic hydrogen evolution and symmetry supercapacitors

Walnut Shell-derived hierarchical porous carbon has been successfully synthesized by the efficient KOH activation process. The hierarchical porous carbon material activated at 600 °C, has the specific micropore area of 1037.31 m² g⁻¹ and micropore volume of 0.51 cm³ g⁻¹, which leads to have electrochemical performances of the hydrogen evolution reaction (HER) and supercapacitors. Specifically, as the hydrogen evolution reaction electrocatalyst, the walnut shell-derived carbon material activated at 600 °C exhibits a lower onset potential of 6.00 mV, a smaller Tafel slope of 69.76 mV dec⁻¹ and outstanding stability above long-term cycling. As a supercapacitor electrode material, the sample possesses specific capacitance of 262.74 F g⁻¹ at 0.5 A g⁻¹, the remarkable rate capability of 224.60 F g⁻¹ at even 10 A g⁻¹ and good long-term stability. A symmetric supercapacitor shows the highly energy density of 7.97 Wh kg⁻¹ at a power density of 180.80 W kg⁻¹. This novel and low-cost biomass material is very promising for the electrocatalytic water splitting and supercapacitors.     

One-step hydrothermal preparation of bi-functional NiS2/reduced graphene oxide composite electrode material for dye-sensitized solar cells and supercapacitors

To screen out suitable electrode materials and overcome the shortcomings of the existed electrode materials for the application in dye-sensitized solar cells and supercapacitors, NiS₂/reduced graphene oxide (NiS₂/rGO) composite material was prepared by a simple one-step hydrothermal method in this paper and applied in the field of both dye-sensitized solar cells and supercapacitors as electrode material. In an electrolyte of 6 M KOH, the NiS₂/rGO composite material with bilayer capacitance characteristics exhibited a high specific capacitance of 259.20 F g⁻¹ at the current density of 0.6 A g⁻¹, which was significantly higher than that of rGO (188.94 F g⁻¹). Moreover, at a current density of 2 A g⁻¹, the NiS₂/rGO composite material had 92.85% capacitance retention after 2000 cycles. When applied as counter electrode material for the dye-sensitized solar cells, the NiS₂/rGO composite material counter electrode exhibited a satisfactory photoelectric conversion efficiency (η) of 3.16% under standard simulated sunlight (AM 1.5 G), which was significantly higher than that of single rGO counter electrode (improved by 90.40%). The NiS₂/rGO composite electrode material prepared by a simple one-step hydrothermal method is a potential bi-functional composite electrode materials for both dye-sensitized solar cells and supercapacitors.     

Formation of hierarchical 3D cross-linked porous carbon with small addition of graphene for supercapacitors

In the present paper, starch was used as raw material to prepare carbon material with low-temperature hydrothermal route and hierarchical three-dimensional cross-linked porous carbon was successfully synthesized with the help of a small amount of graphene for high-performance supercapacitors. It's found that presence of graphene is a crucial condition for the formation of 3D porous carbon and graphene acts as a skeleton in the porous carbon. This kind of carbon material exhibited very high surface area of 1887.8 m² g⁻¹ and delivered excellent electrochemical performance. Its specific capacitance can reach 141 F g⁻¹ at 0.5 A g⁻¹ and more importantly, after 10,000 cycles 98.6% of initial specific capacitance can be maintained. To explore the practical application of the 3D porous carbon, an asymmetric supercapacitor coin-type device was assembled with 3D porous carbon and graphene as electrode materials in organic electrolyte. The constructed device exhibited high energy density of 48.5 Wh·kg⁻¹ at a power density of 1.5 kW kg⁻¹ and still maintains 39.625 Wh·kg⁻¹ under the high power density (15 kW kg⁻¹). These results will promote the rapid development of 3D porous carbon prepared by low-temperature route and the application in supercapacitors.     

A comparative study of various polyelectrolyte/nanocomposite electrode combinations in symmetric supercapacitors

A more practical, nontoxic and cheaper electrolyte, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) was used to construct supercapacitors with different nanocomposite electrodes. The flexible devices were fabricated including active carbon (AC) electrode and nanocomposites electrodes of AC/nano-silica (nano-SiO₂) and AC/multiwalled carbon nanotubes (MWCNTs) at various weight percentages. The symmetrical cell made from AC electrodes generated a maximum specific capacitance (Cs) of 315 F g⁻¹ at 0.5 A g⁻¹. The energy density of this device was 55.5 Wh kg⁻¹ at a power density of 690 W kg⁻¹. Excellent performance was achieved after 5000 charge-discharge cycles where the supercapacitor maintains 92% of its activity. The energy storage capability of the supercapacitors was also investigated with the addition of nano-SiO₂ and MWCNTs. The Cs of the supercapacitors made with the electrodes AC/nano-SiO₂ (5%, 10%, 25% and 50%) were 172, 228, 247 and 55 F g⁻¹, respectively. Similarly, the capacity of the device including the electrodes of AC/MWCNTs (5%, 10%, 25% and 50%) varied as 191, 244, 93 and 20 F g⁻¹ at 0.5 A g⁻¹. The maximum energy density of the devices having nano-SiO₂ and MWCNT were 44.4 Wh kg⁻¹ and 43.8 Wh kg⁻¹, respectively at a power density of 520 W kg⁻¹. A supercapacitor with certain dimension successfully operated a light-emitting diode (LED).     

Interconnected NiS-nanosheets@porous carbon derived from Zeolitic-imidazolate frameworks (ZIFs) as electrode materials for high-performance hybrid supercapacitors

Nickel sulfide-based materials have shown great potential for electrode fabrication owing to their high theoretical specific capacitance but poor conductivity and morphological aggregation. A feasible strategy is to design hybrid structure by introducing highly-conductive porous carbon as the supporting matrix. Herein, we synthesized hybrid composites consisting of interconnected NiS-nanosheets and porous carbon (NiS@C) derived from Zeolitic-imidazolate frameworks (ZIFs) using a facile low-temperature water-bath method. When employed as electrode materials, the as-prepared NiS@C nanocomposites present remarkable electrochemical performance owing to the complex effect that is the combined advantages of double-layer capacitor-type porous carbon and pseudocapacitor-type interconnected-NiS nanosheets. Specifically, the NiS@C nanocomposites exhibit a high specific capacitance of 1827 F g⁻¹ at 1 A g⁻¹, and excellent cyclic stability with a capacity retention of 72% at a very high current density of 20 A g⁻¹ after 5000 cycles. Moreover, the fabricated hybrid supercapacitor delivers 21.6 Wh kg⁻¹ at 400 W kg⁻¹ with coulombic efficiency of 93.9%, and reaches 10.8 Wh kg⁻¹ at a high power density of 8000 W kg⁻¹, along with excellent cyclic stability of 84% at 5 A g⁻¹ after 5000 cycles. All results suggest that NiS@C nanocomposites are applicable to high-performance electrodes in hybrid supercapacitors and other energy-storage device applications.     

Facile fabrication of comb-like porous NiCo2O4 nanoneedles on Ni foam as an advanced electrode for high-performance supercapacitor

It is very desirable to develop the high-performance supercapacitors to meet the rapidly growing demands for energy-autonomous operation and miniaturization of devices. Herein, comb-like porous NiCo₂O₄ nanoneedles on the three-dimension (3D) nickel foam (NF) have been successfully synthesized through a facile pulsed laser ablation (PLA) approach without any post-treatments and surfactant (denoted as NiCo₂O₄-PLA). The influence of working solution during the fabricated process on the properties of NiCo₂O₄-PLA has been demonstrated in detail in terms of the crystalline structure, specific surface area, morphology, and electrochemical performance. Benefiting from the large specific surface (261.4 m² g⁻¹), abundant pores, and highly conductive scaffold, the NiCo₂O₄-PLA binder-free electrode exhibits an outstanding specific capacitance (1650 F g⁻¹ at a current density of 1 A g⁻¹) and eminent cycling performance (91.78% retention after a 12,000-cycle test at a current density of 10 A g⁻¹) compared with the control samples. The assembled asymmetric device (NiCo₂O₄-PLA//AC-ASCs) delivers the high specific capacitance of 126.9 F g⁻¹ at the current density of 1 A g⁻¹, the large energy density of 56.7 Wh kg⁻¹ at a power density of 756 W kg⁻¹, and the low internal resistance. The attractive results strongly prove that it is an ideal candidate for advanced supercapacitor application.     

Fabrication and electrochemical characterization of two-dimensional ordered nanoporous manganese oxide for supercapacitor applications

A nanoporous manganese oxide (MnO₂) film was fabricated via a polystyrene templated electrodeposition in the solution containing MnSO₄. The nanoporous MnO₂ film obtained has been characterized by field emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge/discharge methods. The specific capacitance of 1018 F g⁻¹ was observed at a low current density of 500 mA g⁻¹. When the current density increased to 30.0 A g⁻¹, the specific capacitance of 277 F g⁻¹ remained. The high capacitance retention at high rates makes the prepared MnO₂ a promising candidate for supercapacitor applications.     

One-step synthesis of nanoblocks@nanoballs NiMnO3/Ni6MnO8 nanocomposites as electrode material for supercapacitors

A novel nanoblocks@nanoballs NiMnO₃/Ni₆MnO₈ electrode material was synthesized by one-step solvothermal–hydrothermal method, followed by thermal annealing. At the same time, electrode materials with different nanostructure were prepared by changing the volume ratio of deionied water and ethylene glycol. The results show that different structure has been gained including nanospheres, nanosheets and nanoblocks. When the deionied water: ethylene glycol = 1:1 (nanoblocks@nanoballs NiMnO₃/Ni₆MnO₈ composite structure), the electrode material has a maximum specific surface area of 55.3 m² g⁻¹. The electrode material exhibited outstanding electrochemical performance with specific capacitance reached 494.4 F g⁻¹ at a current density of 1 A g⁻¹ as well as superior cycling performance of 88.0% capacitance retention after 5000 cycles at 3 A g⁻¹. Such excellent performance was due to the synergistic effective between the Ni₆MnO₈ nanoballs and NiMnO₃ nanoblocks. Nanoballs structure will increase in specific surface area and redox reaction active sites, and the blocks structure acts as a holder to improved the cycle performance. The NiMnO₃/Ni₆MnO₈ become a promising candidate as next-generation electrode material for high-performance supercapacitors.     

Co-precipitation synthesis of nickel cobalt hexacyanoferrate for binder-free high-performance supercapacitor electrodes

Prussian blue analogue with a typical metal-organic framework has been widely used as an electrode material in supercapacitor. In this work, nickel cobalt hexacyanoferrate (Ni₂CoHCF) was grown on nickel foam directly using a simple co-precipitation method. The as-prepared Ni₂CoHCF was tested by transmission electron microscope, scanning electron microscope, X-ray diffraction and X-ray electron energy spectrum. The results showed that Ni₂CoHCF has a unique open face-centered cubic structure. The Ni₂CoHCF was used to set an asymmetric supercapacitor directly. A series of electrochemical tests showed that Ni₂CoHCF had an excellent electrochemical performance. The specific capacitance of the supercapacitor was 585 C g⁻¹ (1300.0 F g⁻¹, 162.5 mAh g⁻¹) at the current density of 0.5 A g⁻¹. After 2000 cycles, it still maintained 85.57% of its initial specific capacitance at the current density of 10 A g⁻¹. The energy density was 30.59 Wh kg⁻¹ at the power density of 378.7 W kg⁻¹. The results show that the supercapacitor constructed by Ni₂CoHCF as an electrode material has high-current charge-discharge capacity, high energy density and long cycle life.     

Transforming waste sugar solution into N-doped hierarchical porous carbon for high performance supercapacitors in aqueous electrolytes and ionic liquid

Waste sugar solution is a by-product in the process of manufacturing vitamin C. Nowadays, the unused industrial waste residues are transformed into high efficient energy storage devices, such as supercapacitors electrodes, which are worth exploring because they are consistent with the concept of green and sustainable development. In this paper, a nitrogen-doped hierarchical porous carbon are obtained via pre-carbonization and KOH activation. The as-prepared material, possessed proper pore size distribution, large specific surface area and nitrogen-doping, exhibits good electrochemical performance, such as a high specific capacitance of 342 F g⁻¹ (0.1 A g⁻¹), good stability with 95% capacitance retention after 15,000 cycles in 6 M KOH. Moreover, the supercapacitors deliver a high energy density of 25.6 and 65.9 W h kg⁻¹ in the 1 M Na₂SO₄ and EMIMBF₄, respectively. The good electrochemical performance illustrates that the nitrogen-doped hierarchically porous carbon derived from the waste sugar solution is a potential candidate for energy storage.     

3D carboxyl and hydroxyl co-enriched graphene hydrogels as binder-free electrodes for symmetric supercapacitors

At present, amino acids are often used as the source of heteroatom functional groups for the preparation of doped graphene materials. However, a large amount of amino acids will be used as reaction precursors in the preparation process, which will lead to increased cost, reduced efficiency and waste of resources. Herein, a very small amount of neutral l-alanine is employed to synthesize 3D carboxyl and hydroxyl co-enriched graphene hydrogels (CHGHs) by a one-pot hydrothermal method. The CHGHs contain copious carboxyl and hydroxyl groups, and a small amount of nitrogen-containing functional groups. In addition, the CHGHs also present large specific surface areas and 3D porous structures. Therefore, the CHGH-20 binder-free electrode displays a high specific capacitance of 262.8 F g⁻¹ at 0.3 A g⁻¹, and this value still maintains 84.3% (221.6 F g⁻¹) at 10 A g⁻¹ in a two-electrode system in 6 M KOH. Furthermore, the CHGH-20 electrode also displays outstanding cycle stability with 103.6% of its initial capacitance after 10,000 cycles at 10 Ag⁻¹. Therefore, the CHGHs samples prepared by a very small amount of neutral l-alanine have great significance for the practical application of supercapacitors.     

Metal phthalocyanine-linked conjugated microporous polymer hybridized with carbon nanotubes as a high-performance flexible electrode for supercapacitors

Metal phthalocyanine-linked conjugated microporous polymers (MPc-CMPs) have huge potential applications in energy conversion and storage systems. However, the inherent low conductivity limits their practical application. Herein, the MPc-CMPs are hybridized with highly conductive carbon nanotubes (CNTs) via the easy vacuum filtration method. Interestingly, the composite (denoted as CoPc-CMP/CNTs) shows the flexible feature, which can be served as the flexible binder-free electrode for supercapacitors (SCs). As expected, the flexible CoPc-CMP/CNTs exhibits a high specific capacitance of 289.1 F g⁻¹ at a current density of 1 A g⁻¹ and good capacity retention of 82.4% over 1350 cycles at a high current density of 10 A g⁻¹. Furthermore, First-principle calculations are used to elucidate the superiority of CoPc-CMP to other analogues. The good electrochemical performance could be attributed to the synergistic effect from the high pseudocapacitance and good conductivity of CoPc-CMP as well as the capacitive contribution and good conductivity of CNTs. Our strategy provides a new avenue to develop the high-performance SCs via rational integration of MPc-CMPs with highly conductive CNTs.     

Solvothermal synthesis of flower-like structure Cu-Mn bimetallic sulfide on Ni-foam for high-performance symmetric supercapacitors

Although transition metal sulfides have gotten extensive attention due to their high electrical conductivity, fast charge transfer kinetics, outstanding mechanical stability, the performances of them applied separately to supercapacitors are not satisfactory, and one solution is to hybridize with other metal sulfide materials. Therefore, in the study, the flower-like structure Cu-Mn bimetallic sulfide on Ni-foam (CuS/MnS@NF) was firstly synthesized by a hierarchical two-step solvothermal reaction to our knowledge, which was directly utilized as electrodes without binders or conductive agents. The CuS/MnS@NF electrode possesses flower-like morphology, superior electrical conductivity, and there are the synergistic effect and intense interaction between CuS and MnS. They can display higher specific capacitance of 1517.07 F g⁻¹ at 1 A g⁻¹ and excellent cyclic stability with specific capacity retention of 115.6% at 10 A g⁻¹ after 3000 cycles, which is more admirable than their individual metal sulfide electrodes (CuS@NF and MnS@NF) and other recently reported metal-based electrodes. In short, the CuS/MnS@NF electrodes are promising candidate when used in battery-type supercapacitors.     

Green and facile synthesis of porous carbon spheres from waste solution for high performance all-solid-state symmetric supercapacitors

Porous carbon spheres materials display huge potential for energy storage, but their general synthesis need chemical activation agent with highly corrosive to create pores. In this work, a simple, environment-friendly and less time-demanding method is used to prepared porous carbon spheres using K₂FeO₄ as activation agent and waste solution as the precursor. The K₂FeO₄ employ in this work acts both as an activating agent and a catalyst. In addition, replacing KOH with K₂FeO₄ does not only reduce the corrosion of equipment but also increases the content of oxygen. The optimized porous carbon spheres with high specific surface area, hierarchical pore structure and surface heteroatom can deliver a high specific capacitance of 260 F g⁻¹ at 0.1 A g⁻¹ and good cycling stability (90% retention after 15000 cycles at 5 A g⁻¹). Furthermore, the all-solid-state symmetric supercapacitors fabricated based on as-prepared samples exhibit good electrochemical performance in the PVA/KOH electrolyte. This work offers a green route to convert waste solution into porous carbon spheres, which are promising candidate material for supercapacitors to energy storage.     

Core-shell structured ZIF-7@ZIF-67 with high electrochemical performance for all-solid-state asymmetric supercapacitor

Zeolitic imidazolate frameworks (ZIFs) are considered as a promising material for energy storage in recent years. Here, core-shell structured ZIF-7@ZIF-67 is synthesized in this work. The core-shell structured material can promote electron transfer of inner-outer metals ions of ZIF-7@ZIF-67, quicken diffusion of electrolyte ions and improve the capacitance performance compared to the ZIF-7 and ZIF-67. ZIF-7@ZIF-67 delivers good energy storage ability with a specific capacitance of 518.9 F g⁻¹ at a current density of 1 A g⁻¹ and remarkable stability with a retention of 99.6% after 4000 cycles in the three-electrode system. Furthermore, an all-solid-state asymmetric supercapacitor (ASC) device is assembled based on core-shell structured ZIF-7@ZIF-67 as positive electrode. Impressively, the ASC device displays an energy density of 31 Wh kg⁻¹ at a power density of 400 W kg⁻¹ and an excellent cyclic stability with 99.5% retention after 10,000 cycles at a current density of 10 A g⁻¹. Finally, two all-solid-state ASCs are contacted to power various lighting-emitting diodes (LED). The red LED can be kept glowing for over 10 min. These electrochemical characteristics suggest that core-shell structured ZIF-7@ZIF-67 is a potential material for energy storage device with long-life cyclic stability.     

Controlled growth of hierarchical FeCo2O4 ultrathin nanosheets and Co3O4 nanowires on nickle foam for supercapacitors

In recent years, the tenable design and synthesis of the core/shell heterostructure as electrode for the supercapacitor, have attained a huge attention and concerns. In this article, the three-dimensional heterostructure consisting of FeCo₂O₄ ultrathin nanosheets grown on the space of vertical Co₃O₄ nanowires has been designed and synthesized onto nickel foam (NF) for pseudocapacitive electrode applications. According to previous research, the NF@ FeCo₂O₄ electrodes can only exhibit specific capacity of 1172 F g⁻¹ at a current density of 1 A g⁻¹. In addition, although the capacity of the NF@Co₃O₄ electrodes can reach to 1482 F g⁻¹ and it has the disadvantage of agglomeration, which restricts the diffusion of ions and has a negative effect on the progress of electrochemical reactions. Therefore, a core-shell nanostructure is fabricated by an improved two-step hydrothermal process, which improves the probability of ion reaction with more efficient charge transfer. Furthermore, in as-prepared unique core/shell heterostructure, the resultant electrode possesses the merits of large capacitance of 1680 F g⁻¹ at a current density of 1 A g⁻¹, an excellent rate capability of 70.1% at 20 A g⁻¹ and only 9.8% loss of initial capacitance at a high charge/discharge current density after 2000 cycles. These results demonstrate that this kind of distinct electrode has potential utilization for supercapacitor.     

Enhanced performance of carbon-based supercapacitors by constructing protonic and electric dual-channels in electrodes

Powdery carbonaceous materials have to use binder materials when they are integrated into electrodes for supercapacitors, which will results in high interfacial charge transfer resistances and reduced specific capacitance. To resolve the problem, protonic and electric dual-channels are constructed in electrodes by in situ synthesis of cesium hydrogen salt of phosphotungstic acid on the surface of carbonaceous materials. The cesium hydrogen salt particles are confirmed by a Fourier transform infrared spectroscopy, X-ray diffractometer and an energy dispersive X-ray spectroscopy. The electrochemical properties of as-fabricated electrodes are measured by cyclic voltammetry, galvanostatic charging-discharging, and impedance analysis with an electrochemical workstation. At a current density of 1 A g⁻¹, the electrode shows a specific capacitance of 152 F g⁻¹. Compared to the electrode without the cesium hydrogen salt, the value increases 25% at least. Furthermore, the specific capacitance retention of the electrode reaches 104% of its original capacitance after 5000 charge-discharge cycles, suggesting excellent cycling stability.     

Rational design of hierarchical core-shell structured CoMoO4@CoS composites on reduced graphene oxide for supercapacitors with enhanced electrochemical performance

Engineering multicomponent active materials as an advanced electrode with the rational designed core-shell structure is an effective way to enhance the electrochemical performances for supercapacitors. Herein, three-dimensional self-supported hierarchical CoMoO₄@CoS core-shell heterostructures supported on reduced graphene oxide/Ni foam have been rationally designed and prepared via a facile approach. The unique structure and the synergistic effects between two different materials, as well as excellent electronic conductivity of the reduced graphene oxide, contribute to the increased electrochemically active site and enhanced capacitance. The core-shell CoMoO₄@CoS composite displays the superior specific capacitance of 3380.3 F g⁻¹ (1 A g⁻¹) in the three-electrode system and 81.1% retention of the initial capacitance even after 6000 cycles. Moreover, an asymmetric device was successfully prepared using CoMoO₄@CoS and activated carbon as positive/negative electrodes. It is worth mentioning that the device delivered the high energy density of 59.2 W h kg⁻¹ at the power density of 799.8 W kg⁻¹ and the excellent cycle performance (about 91.5% capacitance retention over 6000 cycles). These results indicate that the core-shell CoMoO₄@CoS composites offers the novelty strategy for preparation of electrodes for energy conversion and storage devices.     

High-density oxygen-enriched graphene hydrogels for symmetric supercapacitors with ultrahigh gravimetric and volumetric performance

The contradiction between the porous structure and density of graphene materials makes it unable to meet the dual requirements of the next generation supercapacitors for gravimetric capacitance and volumetric capacitance. Herein, we successfully synthesized high-density oxygen-enriched graphene hydrogels (HOGHs) by a one-step hydrothermal method using high concentration graphene oxide (GO) solution and trometamol as precursors. The as-prepared HOGHs samples present a dense 3D network structure and moderate specific surface areas, which leads to a high packing density. In addition, the HOGHs samples also contain abundant oxygen-containing functional groups and some nitrogen-containing functional groups. These heteroatomic functional groups can provide pseudocapacitance for the electrode materials. Therefore, the HOGH-140 based symmetric supercapacitor shows ultrahigh gravimetric and volumetric specific capacitance (325.7 F g⁻¹, 377.8 F cm⁻³), excellent rate performance and cycling stability. Simultaneously, the symmetric binder-free supercapacitor exhibits high gravimetric specific energy density (11.3 Wh kg⁻¹) and volumetric specific energy density (13.1 Wh L⁻¹) in 6 M KOH, respectively. These outstanding properties make the material have a good application prospect in the field of compact energy storage devices.     

Dual carbon source method to fabricate hierarchical porous carbon with three-dimensional interconnected network structure toward advanced energy storage device

Selective fabrication of carbon materials with developed specific surface area and hierarchical porous structure is essential for high-performance carbon-based supercapacitors. Direct carbonization of organic acid salts represents a strategy that can produce porous carbon with high specific surface area, but it is still hindered by low carbon yield, impeding its large-scale application. Herein, a biomass-derived hierarchical porous carbon with large specific surface area is prepared via a facile one-pot calcination method. The optimal SCPC-4 sample presents three-dimensional interconnected network structure and plentiful heteroatom content. Hence, it delivers a large specific capacitance of 321 F g^?1 at a current density of 1 A g^?1, and negligible capacitance loss after 10,000 cycles at 10 A g^?1. In addition, the assembled SCPC-4 based symmetric supercapacitor exhibits an energy density of 21.2 Wh kg^?1 at a power density of 900 W kg^?1. This cost-effective binary biomass carbon source route provides a great possibility for the mass production of high-yield porous carbon materials.