Enhanced hydrogen-storage properties of MgH2 by Fe–Ni catalyst modified three-dimensional graphene

High dehydrogenation temperature and slow dehydrogenation kinetics impede the practical application of magnesium hydride (MgH₂) serving as a potential hydrogen storage medium. In this paper, Fe–Ni catalyst modified three-dimensional graphene was added to MgH₂ by ball milling to optimize the hydrogen storage performance, the impacts and mechanisms of which are systematically investigated based on the thermodynamic and kinetic analysis. The MgH₂+10 wt%Fe–Ni@3DG composite system can absorb 6.35 wt% within 100 s (300 °C, 50 atm H₂ pressure) and release 5.13 wt% within 500 s (300 °C, 0.5 atm H₂ pressure). In addition, it can absorb 6.5 wt% and release 5.7 wt% within 10 min during 7 cycles, exhibiting excellent cycle stability without degradation. The absorption-desorption mechanism of MgH₂ can be changed by the synergistic effects of the two catalyst materials, which significantly promotes the improvement of kinetic performance of dehydrogenation process and reduces the hydrogen desorption temperature.     

Remarkable kinetics of novel Ni@CeO2–MgH2 hydrogen storage composite

Magnesium hydroxide (MgH₂) has excellent reversibility and high capacity, and is one of the most promising materials for hydrogen storage in practical applications. However, it suffers from high dehydrogenation temperature and slow sorption kinetics. Rare earth hydrides and transition metals can both significantly improve the de/hydrogenation kinetics of MgH₂. In this work, MgH₂–Mg₂NiH₄–CeH_2.73 is in-situ synthesized by introducing Ni@CeO₂ into MgH₂. The unique coating structure of Ni@CeO₂ facilitates homogeneous distribution of synergetic CeH_2.73 and Mg₂NiH₄ catalytic sites in subsequent ball milling process. The as-fabricated composite MgH₂-10 wt% Ni@CeO₂ powders possess superior hydrogenation/dehydrogenation characteristics, absorbing 4.1 wt% hydrogen within 60 min at 100 °C and releasing 5.44 wt% H₂ within 10 min at 350 °C. The apparent activation energy of MgH₂-10 wt% Ni@CeO₂ is determined to be 84.8 kJ/mol and it has favorable hydrogen cycling stability with almost no decay in capacity after 10 cycles.     

The hydrogen storage properties and catalytic mechanism of the CuFe2O4-doped MgH2 composite system

The influence of CuFe₂O₄ addition on the sorption performances of MgH₂ prepared by ball milling was studied for the first time. The MgH₂ + 10 wt% CuFe₂O₄ sample exhibited an enhancement in hydrogen storage performance compared to that of as-milled MgH₂, with the onset decomposition temperature decreased from 340 °C to 250 °C. Dehydrogenation kinetic result revealed that CuFe₂O₄-added MgH₂ released around 5.3 wt% H₂ within 10 min at 320 °C, while the as-milled MgH₂ released below 1.0 wt% H₂ under the same condition. Furthermore, about 5.0 wt% H₂ was absorbed at 250 °C in 30 min for the 10 wt% CuFe₂O₄-doped MgH₂ sample. In contrast, the un-doped MgH₂ only absorbed 4.0 wt% H₂ at 250 °C in 30 min. From the Kissinger analysis, the apparent activation energy of as-milled MgH₂ was 166.0 kJ/mol and this value decreased to 113.0 kJ/mol for 10 wt% CuFe₂O₄-added MgH₂. The enhanced sorption performance of MgH₂ in the presence of CuFe₂O₄ is believed to be due to the role of in situ formed Fe, Mg-Cu alloy, and MgO phases as an active species to catalyse the hydrogen storage properties of MgH₂.     

Thermally stable Ni MOF catalyzed MgH2 for hydrogen storage

The poor kinetics is the main issue hindering MgH₂ for practical hydrogen storage application. In this work, the tricarboxybenzene was used to construct the stable Ni MOF (Ni-BTC300) as the catalyst for MgH₂. The prepared MOFs maintained their chemical structure after 300 °C calcining and doped to MgH₂ by ball milling. The dispersed, uniformly bonded Ni atoms can improve the kinetics of the composites, which could desorb 5.14 wt% H₂ within 3 min at 300 °C. And the stable MOF structure leading to good cycle stability in both kinetics and capacity, with retention of 98.2% after 10 cycles.     

Room temperature conversion of Mg to MgH2 assisted by low fractions of additives

In recent works, it was noticed that Mg/MgH₂ mixed with additives by high energy ball milling allows temperature reductions of H₂ absorption/desorption without necessarily changing thermodynamic properties. Thus, the objective of this work was to investigate which additives, mixed in low fractions with MgH₂ powder would act as efficient hydrogen absorption/desorption catalysts at low temperatures, mainly at room temperature (RT). MgH₂ mixtures with 2 mol% additives (Fe, Nb₂O₅, TiAl and TiFe) were prepared by high energy reactive ball milling (RM). MgH₂–TiFe mixture showed the best results, both during desorption at 330 °C and absorption at RT. The hydrogen absorption was ≈ 2.67 wt% H₂ in 1 h and ≈ 4.44 wt% H₂ in 16 h (40% and 67% of maximum theoretical capacity, respectively). The MgH₂–TiFe superior performance was attributed to the hydrogen attraction by the created high energy interfaces and strong TiFe catalytic action facilitating the H₂ flow during Mg/MgH₂ reactions.     

Phase-structural and morphological features,dehydrogenation/re-hydrogenation performance and hydrolysis of nanocomposites prepared by ball milling of MgH2 with germanium

Ball milling of magnesium hydride with germanium additives in argon for up to 10 h was shown to result in the formation of nanocomposites of α- and γ-modifications of MgH₂ together with individual Ge phase. When the as milled samples are heated-up, Ge interacts with MgH₂ to form Mg₂Ge at T = 350–400 °C; the phase transformation overlaps with MgH₂ decomposition and Mg₂Ge phase remains in the material after its re-hydrogenation at T = 300 °C and P(H₂)∼15 bar.The ball milled Ge-MgH₂ nanocomposites were found to be characterised by an improved hydrogen release via hydrolysis in organic acid solutions as compared to pure MgH₂ prepared and tested at the same conditions. It was found that the composite containing 5 wt% of Ge and ball milled for 5 h showed the best hydrogen generation performance, with total hydrogen release exceeding 1.55 NL/g (yield close to 100%) in one minute.     

Facile synthesized Fe nanosheets as superior active catalyst for hydrogen storage in MgH2

Reversible hydrogen storage in MgH₂ under mild conditions is a promising way for the realization of “Hydrogen Economy”, in which the development of cheap and highly efficient catalysts is the major challenge. Herein, A two-dimensional layered Fe is prepared via a facile wet-chemical ball milling method and has been confirmed to greatly enhance the hydrogen storage performance of MgH₂. Minor addition of 5 wt% Fe nanosheets to MgH₂ decreases the onset desorption temperature to 182.1 °C and enables a quick release of 5.44 wt% H₂ within 10 min at 300 °C. Besides, the dehydrogenated sample takes up 6 wt% H₂ in 10 min under a hydrogen pressure of 3.2 MPa at 200 °C. With the doping of Fe nanosheets, the apparent activation energy of the dehydrogenation reaction for MgH₂ is reduced to 40.7 ± 1.0 kJ mol⁻¹. Further ab initio calculations reveal that the presence of Fe extends the Mg–H bond length and reduces its bond strength. We believe that this work would shed light on designing plain metal for catalysis in the area of hydrogen storage and other energy-related issues.     

Enhanced hydrogen absorption and desorption properties of MgH2 with graphene and vanadium disulfide

Magnesium hydride (MgH₂) is the most prominent carrier for storing hydrogen in solid-state mode. However, their slow kinetics and high thermodynamics become an obstacle in hydrogen storage. The present study elaborates on the catalytic effect of graphene (Gr) and vanadium disulfide (VS₂) on MgH₂ to enhance its hydrogen sorption kinetic. The temperature-programmed desorption study shows that the onset desorption temperature of MgH₂ catalyzed by VS₂ and MgH₂ catalyzed by Gr is 289 °C and 300 °C, respectively. These desorption temperatures are 87 °C and 76 °C lower than the desorption temperature of pristine MgH₂. The rapid rehydrogenation kinetics for the MgH₂ catalyzed by VS₂ have been found at a temperature of 300 °C under 15 atm H₂ pressure by absorbing ∼4.04 wt% of hydrogen within 1 min, whereas the MgH₂ catalyzed by Gr takes ∼3 min for absorbing the same amount of hydrogen under the similar temperature and pressure conditions. The faster release of hydrogen was also observed in MgH₂ catalyzed by VS₂ than MgH₂ catalyzed by Gr and pristine MgH₂. MgH₂ catalyzed by VS₂ releases ∼2.54 wt% of hydrogen within 10 min, while MgH₂ catalyzed by Gr takes ∼30 min to release the same amount of hydrogen. Furthermore, MgH₂ catalyzed by VS₂ also persists in the excellent cyclic stability and reversibility up to 25 cycles.     

Enhancing hydrogen storage performance of MgH2 through the addition of BaMnO3 synthesized via solid-state method

Currently, magnesium hydride (MgH₂) as a solid-state hydrogen storage material has become the subject of major research owing to its good reversibility, large hydrogen storage capacity (7.6 wt%) and affordability. However, MgH₂ has a high decomposition temperature (>400 °C) and slow desorption and absorption kinetics. In this work, BaMnO₃ was synthesized using the solid-state method and was used as an additive to overcome the drawbacks of MgH₂. Interestingly, after adding 10 wt% of BaMnO₃, the initial desorption temperature of MgH₂ decreased to 282 °C, which was 138 °C lower than that of pure MgH₂ and 61 °C lower than that of milled MgH₂. For absorption kinetics, at 250 °C in 2 min, 10 wt% of BaMnO₃-doped MgH₂ absorbed 5.22 wt% of H₂ compared to milled MgH₂ (3.48 wt%). Conversely, the desorption kinetics also demonstrated that 10 wt% of BaMnO₃-doped MgH₂ samples desorbed 5.36 wt% of H₂ at 300 °C within 1 h whereas milled MgH₂ only released less than 0.32 wt% of H₂. The activation energy was lowered by 45 kJ/mol compared to that of MgH₂ after the addition of 10 wt% of BaMnO₃. Further analyzed by using XRD revealed that the formation of Mg_0·9Mn_0·1O, Mn₃O₄ and Ba or Ba-containing enhanced the performance of MgH₂.     

Boosting low-temperature de/re-hydrogenation performances of MgH2 with Pd-Ni bimetallic nanoparticles supported by mesoporous carbon

Bimetallic Pd-Ni nano-particles supported by a mesoporous carbon material CMK-3 (denoted as Pd₃₀Ni₇₀/CMK-3) were synthesized through solution impregnation and hydrogen reduction methods. Among those hierarchical Ni-Pd nano-particles, majorly large ones (>10 nm) are dispersed over the surface of CMK-3, while a litter small ones (<10 nm) are embedded into the pores. It significantly improves the de/re-hydrogenation performances of MgH₂ at low temperature. The onset desorption temperature of MgH₂-Pd₃₀Ni₇₀/CMK-3 is lowered by 150 K from that of pristine MgH₂ (above 593 K). About 6 wt% hydrogen could be released during its decomposition below 561 K. Noticeably, MgH₂-Pd₃₀Ni₇₀/CMK-3 is capable of releasing 1.3 wt% H₂ even at 373 K. 4 wt% hydrogen can be absorbed at 343 K under a hydrogen pressure of 3 MPa within 18000 s. Activation energy values of both hydrogen decomposition (65.9 kJ mol⁻¹) and absorption (78.9 kJ mol⁻¹) for MgH₂-Pd₃₀Ni₇₀/CMK-3 are greatly improved from those of as-milled MgH₂. Thermal stability of the composite system is remarkably destabilized by 4.3 kJ mol H₂⁻¹ from pristine MgH₂ according to pressure-composition isotherm curves and van't Hoff plots. The enhanced performances can be ascribed to the synergistic effects of both destabilization and catalysis from nano-dispersed Pd and Ni particles, respectively.     

Effect of Ti-based nanosized additives on the hydrogen storage properties of MgH2

MgH₂-based nanocomposites were synthesized by high-energy reactive ball milling (RBM) of Mg powder with 0.5–5 mol% of various catalytic additives (nano-Ti, nano-TiO₂, and Ti₄Fe₂O_x suboxide powders) in hydrogen. The additives were shown to facilitate hydrogenation of magnesium during RBM and substantially improve its hydrogen absorption-desorption kinetics. X-ray diffraction analysis showed the formation of nanocrystalline MgH₂ and hydrogenation of nano-Ti and Ti₄Fe₂O_x. The possible reduction of TiO₂ during RBM in hydrogen was not observed, which is in agreement with lower hydrogenation capacity of the corresponding composite, 5.7 wt% for Mg + 5 mol% nano-TiO₂ compared to 6.5 wt% for Mg + 5 mol% nano-Ti. Hydrogen desorption from the as-prepared composites was studied by Thermal Desorption Spectroscopy (TDS) in vacuum. A significant lowering of the hydrogen desorption temperature of MgH₂ by 30–90 °C in the presence of the additives is associated with lowering activation energy from 146 kJ/mol for nanosized MgH₂ down to 74 and 67 kJ/mol for MgH₂ modified with nano-TiO₂ and Ti₄Fe₂O_0.3 additives, respectively. After hydrogen desorption at 300–350 °C, these materials are able to absorb hydrogen even at room temperature. It is shown that nano-structuring and addition of Ti-based catalysts do not decrease thermodynamic stability of MgH₂. The thermodynamic parameters, obtained from hydrogen desorption isotherms for the Mg–Ti₄Fe₂O_0.3 nanocomposite, ΔH_des = 76 kJ/mol H₂ and ΔS_des = 138 J/K·mol H₂, correspond to the reported literature values for pure polycrystalline MgH₂. Hydrogen absorption-desorption characteristics of the composites with nano-Ti remain stable during at least 25 cycles, while a gradual decay of the reversible hydrogen capacity occurred in the case of TiO₂ and Ti₄Fe₂O_x additives. Cycling stability of Mg/Ti₄Fe₂O_x was substantially improved by introduction of 3 wt% graphite into the composite.     

Integrated Ni/Nb2O5 nanocatalytic agent dose for improving the hydrogenation/dehydrogenation kinetics of reacted ball milled MgH2 powders

Reactive ball milling (RBM) technique was employed to synthesize ultrafine powders of MgH₂, using high energy ball mill operated at room temperature under 50 bar of a hydrogen gas atmosphere. The MgH₂ powders obtained after 200 h of continuous RBM time composed of β and γ phases. The powders possessed nanocrystalline characteristics with an average grain of about 10 nm in diameter. The time required for complete hydrogen absorption and desorption measured at 250 °C was 500 s and 2500 s, respectively. In order to improve the hydrogenation/dehydrogenation kinetics of as synthesized MgH₂ powders, three different types of nanocatalysts (metallic Ni, Nb₂O₅ and (Ni)_x/(Nb₂O₅)_y) were utilized with different weight percentages and independently ball milled with the MgH₂ powders for 50 h under 50 bar of a hydrogen gas atmosphere. The results showed that the prepared nanocomposite MgH₂/5Ni/5Nb₂O₅ powders possessed superior hydrogenation/dehydrogenation characteristics, indexed by low values of activation energy for β-phase (68 kJ/mol) and γ-phase (74 kJ/mol). This nanocomposite system showed excellent hydrogenation/dehydrogenization behavior, indexed by the short time required to uptake (41 s) and release (121 s) of 5 wt% H₂ at 250 °C. At this temperature the synthesized nanocomposite powders possessed excellent absorption/desorption cyclability of 180 complete cycles. No serious degradation on the hydrogen storage capacity could be detected and the system exhibited nearly constant absorption and desorption values of +5.46 and −5.46 wt% H₂, respectively.     

Synergistic enhancement of hydrogen storage properties in MgH2 using LiNbO3 catalyst

Extensive researches are being conducted to improve the high dehydrogenation temperature and sluggish hydrogen release rate of magnesium hydride (MgH₂) for better industrial application. In this study, LiNbO₃, a catalyst composed of alkali metal Li and transition metal Nb, was prepared through a direct one-step hydrothermal synthesis, which remarkably improved the hydrogen storage performance of MgH₂. With the addition of 6 wt% LiNbO₃ in MgH₂, the initial dehydrogenation temperature decreases from 300 °C to 228 °C, representing a drop of almost 72 °C compared to milled MgH₂. Additionally, the MgH₂-6 wt.% LiNbO₃ composite can quickly release 5.45 wt% of H₂ within 13 min at 250 °C, and absorbed about 3.5 wt% of H₂ within 30 min at 100 °C. It is also note that LiNbO₃ shows better catalytic effect compared to solely adding Li₂O or Nb₂O₅. Furthermore, the activation energy of MgH₂-6 wt.% LiNbO₃ decreased by 44.37% compared to milled MgH₂. The enhanced hydrogen storage performance of MgH₂ is attributed to the in situ formation of Nb-based oxides in the presence of LiNbO₃, which creates a multielement and multivalent chemical environment.     

Ternary transition metal alloy FeCoNi nanoparticles on graphene as new catalyst for hydrogen sorption in MgH2

The present investigation deals with the synthesis of ternary transition metal alloy nanoparticles of FeCoNi and graphene templated FeCoNi (FeCoNi@GS) by one-pot reflux method and there use as a catalyst for hydrogen sorption in MgH₂. It has been found that the MgH₂ catalyzed by FeCoNi@GS (MgH₂: FeCoNi@GS) has the onset desorption temperature of ~255 °C which is 25 °C and 100 °C lower than MgH₂ catalyzed by FeCoNi (MgH₂: FeCoNi) (onset desorption temperature 280 °C) and the ball-milled (B.M) MgH₂ (onset desorption temperature 355 °C) respectively. Also MgH₂: FeCoNi@GS shows enhanced kinetics by absorbing 6.01 wt% within just 1.65 min at 290 °C under 15 atm of hydrogen pressure. This is much-improved sorption as compared to MgH₂: FeCoNi and B.M MgH₂ for which hydrogen absorption is 4.41 wt% and 1.45 wt% respectively, under the similar condition of temperature, pressure and time. More importantly, the formation enthalpy of MgH₂: FeCoNi@GS is 58.86 kJ/mol which is 19.26 kJ/mol lower than B.M: MgH₂ (78.12 kJ/mol). Excellent cyclic stability has also been found for MgH₂: FeCoNi@GS even up to 24 cycles where it shows only negligible change from 6.26 wt% to 6.24 wt%. A feasible catalytic mechanism of FeCoNi@GS on MgH₂ has been put forward based on X-ray diffraction (XRD), Raman spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Photoelectron Spectroscopy (XPS), and microstructural (electron microscopic) studies.     

Effect of Ni/tubular g-C3N4 on hydrogen storage properties of MgH2

Additive doping is one of the effective methods to overcome the shortcomings of MgH₂ on the aspect of relatively high operating temperatures and slow desorption kinetics. In this paper, hollow g-C₃N₄ (TCN) tubes with a diameter of 2 μm are synthesized through the hydrothermal and high-temperature pyrolysis methods, and then nickel is chemically reduced onto TCN to form Ni/TCN composite at 278 K. Ni/TCN is then introduced into the MgH₂/Mg system by means of hydriding combustion and ball milling. The MgH₂–Ni/TCN composite starts to release hydrogen at 535 K, which is 116 K lower than the as-milled MgH₂ (651 K). The MgH₂–Ni/TCN composite absorbs 5.24 wt% H₂ within 3500 s at 423 K, and takes up 3.56 wt% H₂ within 3500 s, even at a temperature as low as 373 K. The apparent activation energy (E_a) of the MgH₂ decreases from 161.1 to 82.6 kJ/mol by the addition of Ni/TCN. Moreover, the MgH₂–Ni/TCN sample shows excellent cycle stability, with a dehydrogenation capacity retention rate of 98.0% after 10 cycles. The carbon material enhances sorption kinetics by dispersing and stabilizating MgH₂. Otherwise, the phase transformation between Mg₂NiH₄ and Mg₂NiH_0.3 accelerates the re/dehydrogenation reaction of the composite.     

Remarkable synergistic effects of Mg2NiH4 and transition metal carbides (TiC,ZrC, WC) on enhancing the hydrogen storage properties of MgH2

Nanostructuring and catalyzing are effective methods for improving the hydrogen storage properties of MgH₂. In this work, transition-metal-carbides (TiC, ZrC and WC) are introduced into Mg–Ni alloy to enhance its hydrogen storage performance. 5 wt% transition-metal-carbide containing Mg₉₅Ni₅ (atomic ratio) nanocomposites are prepared by mechanical milling pretreatment followed by hydriding combustion synthesis and mechanical milling process, and the synergetic enhancement effects of Mg₂NiH₄ and transition-metal-carbides are investigated systematically. Due to the inductive effect of Mg₂NiH₄ and charge transfer effect between Mg/MgH₂ and transition-metal-carbides, Mg₉₅Ni₅-5 wt.% transition-metal-carbide samples all exhibit excellent hydrogen storage kinetic at moderate temperature and start to release hydrogen around 216 °C. Among them, 2.5 wt% H₂ (220 °C) and 4.7 wt% H₂ (250 °C) can be released from the Mg₉₅Ni₅-5 wt.% TiC sample within 1800 s. The unique mosaic structure endows the Mg₉₅Ni₅-5 wt.% TiC with excellent structural stability, thus can reach 95% of saturated hydrogen capacity within 120 s even after 10 cycles of de-/hydrogenation at 275 °C. And the probable synergistic enhancement mechanism for hydrogenation and dehydrogenation is proposed.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

Hydrogen absorption and desorption properties of Mg/MgH2 with nanometric dispersion of small amounts of Nb(V) ethoxide

A study to determine the optimal content of Nb(V) ethoxide required to efficiently catalyze the H₂ sorption kinetics in the Mg/MgH₂ system is reported. The materials were synthesized by hand mixing different amounts of additive (from 0.10 to 1 mol%) to pre-milled MgH₂. Considering kinetics and capacity the best performance corresponds to a 0.25 mol% of Nb ethoxide concentration. With this material, a remarkable kinetic behavior with excellent reversibility is obtained: 5.3 wt% and 5.1 wt% of hydrogen are absorbed and desorbed respectively at 300 °C in 3 min. At 250 °C the material absorbs 5.2 wt% of hydrogen and releases 3.7 wt% in 10 min. Thermal desorption starts at 247 °C and peaks at 268 °C. The H₂ sorption properties of all the materials remain unchanged after 10 cycles of absorption and desorption at 300 °C, and the best material reversibly takes in and releases 5.3 wt% of H₂ during a 10 min combined cycle. The kinetic improvement of the hydrogen desorption and absorption properties is attributed to an enhancement of the kinetic processes that occur on the surface of the material, due to the excellent spreading of the liquid additive at nanometric level, as revealed by SEM/EDS and TEM/EELS.     

Kinetic improvement of H2 absorption and desorption properties in Mg/MgH2 by using niobium ethoxide as additive

The hydrogen absorption and desorption properties of a MgH₂ – 1 mol.% Nb(V) ethoxide mixture are reported. The material was prepared by hand mixing the additive with previously ball-milled MgH₂. Nb ethoxide reacts with MgH₂ during heating, releasing C₂H₆ and H₂, and producing MgO and Nb or Nb hydride. Hydriding and dehydriding are greatly enhanced by the use of the alkoxide. At 250 °C the material with Nb takes up 1.8 wt% in 30 s compared with 0.1 wt% of pure Mg, and releases 4.2 wt% in 30 min, whereas MgH₂ without Nb does not appreciably desorb hydrogen. The absorption and desorption activation energies are reduced from 153 kJ/mol H₂ to 94 kJ/mol H₂, and from 176 kJ/mol H₂ to 75 kJ/mol H₂, respectively. The hydrogen sorption properties remain stable after 10 cycles at 300 °C. The kinetic improvement is attributed to the fine distribution of amorphous/nanometric NbH_x achieved by the dispersion of the liquid additive.     

Understanding the dehydrogenation properties of MgH2 catalysed by Na3AlF6

The catalytic effect of Na₃AlF₆ on the dehydrogenation properties of the MgH₂ with X wt% (X = 5, 10, 20 and 50) have been investigated by ball milling technique. Based on the temperature-programme-desorption result, the addition of 10 wt% Na₃AlF₆ to the MgH₂ has demonstrated the best dehydrogenation properties performance. The dehydrogenation temperature of the un-doped MgH₂ has experienced a reduction for about 60 °C after doped with 10 wt% Na₃AlF₆. The dehydrogenation kinetics also has been improved with the addition of 10 wt% Na₃AlF₆. Based on the Kissinger analysis, it was observed that the apparent activation energy of MgH₂ desorption is remarkably decreased from 158 kJ/mol to 129 kJ/mol with the addition of 10 wt% Na₃AlF₆. Meanwhile, the formations of new species, the NaMgF₃, the NaF and the AlF₃ in the doped composite after the de/rehydrogenation processes are found in the X-ray diffraction analysis. These new species are expected to act as the active species that probably contributes to enhance the dehydrogenation properties of MgH₂.