Nickel doped MoS2 nanoparticles as precious-metal free bifunctional electrocatalysts for glucose assisted electrolytic H2 generation

Hydrogen, as the one of clean energy source, has the advantages of high energy density and carbon-free emission. Water electrolysis is one of the most promising ways to generate hydrogen, but the rather high energy required seriously hinders its widespread applications yet. In this study, we report an alkaline electrolyzer to implement energy-saving H₂ generation by coupling cathodic hydrogen evolution reaction (HER) with anodic glucose oxidation reaction (GOR) other than oxygen evolution reaction, in which nickel-doped MoS₂ nanoparticles (Ni–MoS₂ NPs) has been developed as bifunctional electrocatalyst for HER and GOR. The electrolyzer only requires a cell voltage of 1.67 V to reach an electrolysis current density of 10 mA cm⁻², about 270 mV lower than the corresponding value in the traditional electrolyzer. Electrolytic H₂ generation with the assistance of biomass derived materials may open a new way for the future sustainable development.     

Transition metal doped MoS2 nanosheets for electrocatalytic hydrogen evolution reaction

In the present work, the effect of transition metals (Ni, Fe, Co) doping on 2-dimensional (2D) molybdenum disulfide (MoS₂) nanosheets for electrocatalytic hydrogen evolution reaction (HER) was explored. A simple and cost-effective hydrothermal method was adopted to synthesis transition metals doped MoS₂ nanosheets. The morphological and spectroscopic studies evidence the formation of high-quality MoS₂ nanosheets with the randomly doped metal ions. Notably, the Ni–MoS₂ displayed superior HER performance with an overpotential of ?0.302 V vs. reversible hydrogen electrode (RHE) (to attain the current density of 10 mA cm^?2) as compared to the other transition metals doped MoS₂ (Co–MoS₂, Fe–MoS₂). From the Nyquist plot, superior charge transport from the electrocatalyst to the electrolyte in Ni–MoS₂ was realized and confirmed that Ni doping provides the necessary catalytic active sites for rapid hydrogen production. The stable performance was confirmed with the cyclic test and chronoamperometry measurement and envisaged that hydrothermally synthesized Ni–MoS₂ is a highly desirable cost-effective approach for electrocatalytic hydrogen generation.     

Self-standing,hybrid three-dimensional-porous MoS2/Ni3S2 foam electrocatalyst for hydrogen evolution reaction in alkaline medium

Self-standing and hybrid MoS₂/Ni₃S₂ foam is fabricated as electrocatalyst for hydrogen evolution reaction (HER) in alkaline medium. The Ni₃S₂ foam with a unique surface morphology results from the sulfurization of Ni foam showing a truncated-hexagonal stacked sheets morphology. A simple dip coating of MoS₂ on the sulfurized Ni foam results in the formation of self-standing and hybrid electrocatalyst. The electrocatalytic HER performance was evaluated using the standard three-electrode setup in the de-aerated 1 M KOH solution. The electrocatalyst shows an overpotential of 190 mV at ?10 mA/cm² with a Tafel slope of 65.6 mV/dec. An increased surface roughness originated from the unique morphology enhances the HER performance of the electrocatalyst. A density functional approach shows that, the hybrid MoS₂/Ni₃S₂ heterostructure synergistically favors the hydrogen adsorption-desorption steps. The hybrid electrocatalyst shows an excellent stability under the HER condition for 12 h without any performance degradation.     

Self-standing and efficient bifunctional electrocatalyst for overall water splitting under alkaline media enabled by Mo1-xCoxS2 nanosheets anchored on carbon fiber paper

The layered MoS₂ nanostructures have been widely used in the electrochemical hydrogen evolution reaction (HER), but rarely applied in overall water splitting application for their ignorable oxygen evolution reaction (OER) activity. To address this issue, a novel self-standing and bifunctional electrocatalyst, consisting of Co-doped MoS₂ nanosheets anchored on carbon fiber paper, has been prepared via hydrothermal method. Taking advantage of conductive substrate of carbon fiber paper, sufficient-exposed active edges of MoS₂ sheets, and metallic character caused by Co-doping, our electrode exhibits high-efficient bifunctional activities for the overall water splitting in alkaline electrolyte (1 M KOH), which can produce a current density of 20 mA cm⁻² at an overpotential of 197 mV for HER and 235 mV for OER.     

Flower-like HEA/MoS2/MoP heterostructure based on interface engineering for efficient overall water splitting

The development of cheap, efficient, and active non-noble metal electrocatalysts for total hydrolysis of water (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is of great significance to promote the application of water splitting. Herein, a heterogeneous structured electrode based on FeAlCrMoV high-entropy alloy (HEA) was synthesized as a cost-effective electrocatalyst for hydrogen and oxygen evolution reactions in alkaline media. In combination of the interfacial synergistic effect and the high-entropy coordination environment, flower-like HEA/MoS₂/MoP exhibited the excellent HER and OER electrocatalytic performance. It showed a low overpotential of 230 mV at the current density of 10 mA cm⁻² for OER and 148 mV for HER in alkaline electrolyte, respectively. Furthermore, HEA/MoS₂/MoP as both anode and cathode also exhibited an overpotential of 1.60 V for overall water splitting. This work provides a new strategy for heterogeneous structure construction and overall water splitting based on high-entropy alloys.     

Adjusting electronic structure coupling of Fe–Ni2P (NiFeP-MOF) multilevel structure for ultra-activity and durable catalytic water oxidation

Efficient electrocatalyst for alkaline oxygen evolution reaction is the critical core to the wide application of metal-air energy storage and water electrolysis hydrogen energy. Therefore, appropriate design of highly active and stable non-noble metal oxygen evolution electrocatalyst with good electronic structure and multilevel structure is both a goal and a challenge. Here, we report a Fe–Ni₂P electrocatalyst (NiFeP-MOF) with multilevel structure, which was obtained by anion exchange on the basis of Fe–Ni(OH)₂ (NiFe-MOF) grown on nickel foam in situ by solvothermal method. As expected, Fe substitution regulates the Ni oxidation state in the NiFeP-MOF and realizes electronic structure coupling, showing a highly active and stable oxygen evolution reaction (OER) in alkaline electrolyte solution. Specifically, the NiFeP-MOF demonstrates an ultralow overpotentials (232 mV, 10 mA cm^?2; 267 mV 100 mA cm^?2), respectively, an extremely small Tafel slope (34 mV dec^?1). Separately, the electrocatalyst shows an excellent cycle stability at 10 mA cm^?2 for 12 h (43,200 s). More importantly, this work come up with an available policy for the preparation of excellent alkaline hydrolysis electrolysis catalysts and air cathodes with excellent performance.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Graphene confined MoS2 particles for accelerated electrocatalytic hydrogen evolution

MoS₂ is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction. Extensive trials have been carried out to increase its low electrical conductivity and insufficient active sites. Here, a remarkable electrocatalyst for hydrogen evolution is developed based on the in-situ preparation of MoS₂ confined in graphene nanosheets. Graphene effectively controls the growth of MoS₂ and immensely increases the conductivity and structural stability of the composite materials. Remarkably, because of the plentiful active sites, sufficient electrical contact and transport, MoS₂ particles confined in graphene nanosheets exhibit an onset overpotential as small as 32 mV, an overpotential approaching 132 mV at 10 mA cm⁻², and a low Tafel slope of 45 mV dec⁻¹. This work presents a reasonable architecture for practical applications in efficient electrocatalytic H₂ generation.     

Metal doped black phosphorus/molybdenum disulfide (BP/MoS2–Y (Y: Ni,Co)) heterojunctions for the photocatalytic hydrogen evolution and electrochemical nitrite sensing applications

Recently, 2D semiconductor-based heterojunctions emerge as a focal point of intensive research owing to their unique properties, including efficient charge separation and large interface areas. Herein, Ni or Co-doped black phosphorus/molybdenum disulfide (BP/MoS₂–Y (Y: Ni, Co)) heterojunctions fabricate for photocatalytic H₂ evolution and electrochemical nitrite sensor. Compared to the BP/MoS₂, the BP/MoS₂–Ni and BP/MoS₂–Co exhibit enhanced H₂ performance, as 6.4139 mmol h⁻¹ g⁻¹ and 7.4282 mmol h⁻¹ g⁻¹, respectively, in the presence of Eosin-Y (λ ≥ 420 nm). Furthermore, BP/MoS₂–Co applies as an electrocatalyst on a GCE for the electrochemical detection of nitrite. To optimize the nitrite sensing performance of BP/MoS₂–Co, the effect of the pH, amount of material, scan rates, and other conditions study in detail. The BP/MoS₂–Co displays a linear response within the range of 100–2000 μM with a detection limit of 4.1 μM for DPV. This work can offer an opportunity for hydrogen systems as well as electrochemical sensor applications.     

Effect of iron on Ni–Mo–Fe composite as a low-cost bifunctional electrocatalyst for overall water splitting

By increasing demand for hydrogen and oxygen gas for energy and industrial applications, designing a cheap, high-efficiency, and bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) seems necessary. For this purpose Ni–Mo–Fe as a bifunctional electrocatalyst was synthesized by one-step electrodeposition. From this electrocatalyst with optimal composition and current density, a small overpotential of 65, 161 mV for delivering 10, 100 mA/cm² on HER in alkaline media was achieved. As-fabricated electrode exhibited 344,408 mV for delivering 10, 100 mA/cm² in OER. Furthermore, this electrocatalyst shows high stability and negligible degradation in overpotential for HER and OER under long term stability tests in alkaline media. The notable function of As-fabricated Ni–Mo–Fe is due to the synergism effect between Ni, Mo, and Fe element and binder-free structure. Owing to the high-performance and high-stability of Ni–Mo–Fe electrocatalyst under Hydrogen and Oxygen evolution reactions is a candidate for industrial uses in the alkaline electrolyzer.     

Tuning of electrocatalytic activity of mixed metal dichalcogenides supported NiMoP coatings for alkaline hydrogen evolution reaction

The mixed metal dichalcogenides combination of WS₂–MoS₂ was coated onto Cu substrate by electroless NiMoP plating technique and the electrocatalytic hydrogen evolution reaction (HER) performance was investigated. The enhanced structural, morphological parameters and boosted electrocatalytic performance of the various metal-metal molar ratio of WS₂–MoS₂ onto NiMoP plate were identified under variable operating conditions and it was successfully evaluated by various characterization techniques. The well-defined crystalline nature, phase, particle size, structure, elemental analysis and surface morphology of prepared coatings were analyzed by FESEM, XRD, AFM and EDS mapping. The electrochemical analysis was performed using open circuit potential (OCP) analysis, chronoamperometry (CA), electrochemical impedance spectroscopy (EIS), Tafel curves, linear sweep voltammetry (LSV), cyclic voltammetry (CV) and polarization studies to find the activity of prepared electrocatalyst towards electrochemical hydrogen evolution reactions. The performance of bare NiMoP and WS₂–MoS₂/NiMoP plates were compared and found that the HER activity of NiMoP can be reinforced by composite incorporation through the synergic effect arises with in the catalytic system, which improves surface roughness and enhances the magnitude of electrocatalyst toward HER. The achievement of enhanced catalytic performance of coatings was authenticate by the kinetic parameters such as decreases in Tafel slope (98 mV dec^?1), enhanced exchange current densities (9.32 × 10^?4 A cm^?2), and a lower overpotential. The consistent performance and durability of the catalyst were also investigated. The enhanced electrocatalytic activity of WS₂–MoS₂/NiMoP coatings increased with respect to the surface-active sites associated with combination of mixed dichalcogenides and the synergic effect arises in between different components present in the coating system. This work envisages the progressive strategies for the economical exploration of a novel WS₂–MoS₂/NiMoP water splitting catalyst used for large scale H₂ generation. The prepared WS₂–MoS₂/NiMoP embedded Cu substrate possess high catalytic activity due to its least overpotential of 101 mV at a benchmark current density of 10 mA cm^?2, which demonstrated the sustainable, efficient and promising electrocatalytic property of prepared catalyst towards HER under alkaline conditions.     

Solvothermal synthesis of oxygen-incorporated MoS2-x nanosheets with abundant undercoordinated Mo for efficient hydrogen evolution

Activating the inert basal planes of layered molybdenum disulfide (MoS₂) is critical to deliver its high hydrogen evolution reaction (HER) efficiency. Herein, oxygen-incorparated MoS_x with abundant undercoordinated Mo atoms is fabricated by a facile solvothermal procedure, which realizes synergistically structural and electronic regulations of MoS₂ inert basal planes. Experiment results reveal that oxygen incoparation can effectively modulate the electronic structure and further optimize the intrinsic conductivity, while the defect-rich structure with abundant undercoordinated Mo atoms increases the number of active sites. Moreover, the influence of solvothermal temperature on activity of MoS_2-x is also investigated. The achieved MoS_x electrocatalyst prepared at 220 °C exhibits a superior activity for HER with a low overpotential of 191 mV at 10 mA cm⁻², a small Tafel slope of 67 mV dec⁻¹, and an excellent stability due to the largest surface area and superior conductivity.     

Ultrathin-layered MoS2 hollow nanospheres decorating Ni3S2 nanowires as high effective self-supporting electrode for hydrogen evolution reaction

High-activity and cost-effective transition metal sulfides (TMSs) have attracted tremendous attention as promising catalysts for hydrogen evolution reaction (HER). However, a significant challenge is the simultaneous construction of abundant electrochemical active sites and the fast electronic transmission path to boost a high-efficient HER. Herein, we demonstrate a facile one-step hydrothermal preparation of MoS₂ hollow nanospheres decorating Ni₃S₂ nanowires supported on Ni foam (NF), without any other additional template, surfactant or annealing. In this three-dimensional (3D) heterostructure, the ultrathin-layered MoS₂ hollow nanospheres contribute to the promotion of the total surface area and the electrochemical active sites. Meanwhile, the Ni₃S₂ nanowires are beneficial to the high electrical conductivity. Consequently, the optimized MoS₂/Ni₃S₂/NF-200-24 electrocatalyst presents an extremely superior HER activity to that of individual MoS₂/NF and Ni₃S₂/NF. The HER overpotentials are 85 mV at 10 mA cm⁻² and 189 mV at 100 mA cm⁻², which are also comparable with the state-of-the-art 20% Pt/C/NF electrode at both low and high current.     

Facile synthesis of MoS2/CuS nanoflakes as high performance electrocatalysts for hydrogen evolution reaction

The fabrication of metal sulfides heterostructure is a promising strategy for enhancing catalytic activity. Herein, the MoS₂/CuS heterostructure was successfully grown on carbon cloth (MoS₂/CuS/CC) through an efficient method. The SEM results confirmed that the fabricated MoS₂/CuS/CC composites have a flake morphology, which can not only improves the surface area but also offers ample surface catalytic active sites. Particularly, the optimized MoS₂/CuS/CC-2 electrocatalyst showed a small overpotential of 85 mV@10 mA cm^?2 and exceptional long-term cycling durability for hydrogen evolution in 1 M KOH. The outstanding catalytic activity is attributed to the fact that the combination of MoS₂ with CuS can greatly enhance the charge transport rate and improve the structural stability. These results suggest that the MoS₂/CuS/CC heterostructure is a potential electrocatalyst for hydrogen production.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Engineering of molybdenum sulfide nanostructures towards efficient electrocatalytic hydrogen evolution

Water splitting is an appealing way of producing hydrogen fuel, which requires efficient and affordable electrode materials to make the overall process viable. In the last couple years, abundant transition metals (and their compounds and hybrids) attracted ever-growing attention as the alternatives of noble metals. Particularly the layered transition metal dichalcogenide (TMDs) are interesting with their stability and promising electrocatalytic performance for hydrogen evolution reaction (HER). However, the neat TMDs are often poor in terms of the abundance of catalytically active sites and electrical conductivity, which limit their application potential significantly. Herein, as a proof-of-concept, we report on the design of a high-performance electrocatalyst system formed by the decoration of ultrasmall molybdenum sulfide (MoS₂) nanosheets on carbon nanotubes (CNTs). The ultrasmall MoS₂ nanosheets provide distorted lattice, confined size and rich defects, which endows the resulting electrocatalysts (MoS₂/CNT) with abundant active sites. The CNTs, on the other hand, serve as the conductive net for ensuring electrocatalytic performance. As a result, the hybrid electrocatalyst exhibits excellent electrocatalytic performance for HER, achieving a large current density of 100 mA cm⁻² at overpotential of only 281 mV and a small Tafel slope of 43.6 mV dec⁻¹ along with a decent stability. Our results are of high interest for electrocatalyst technologists as well as hydrogen fuel researchers.     

Reduced graphene oxide-supported Ni-MoxC electrocatalyst for hydrogen evolution reaction prepared by ultrasonication and lyophilization

A Ni and Mo_xC hybrid (Ni-Mo_xC) supported on N-doped reduced graphene oxide (N-rGO) electrocatalyst with high hydrogen evolution reaction (HER) activity was prepared by ultrasonication and lyophilization. Notably, benefiting from the synergistic effect between Ni and Mo_xC nanoparticles, the optimized electrocatalyst displayed excellent catalytic activity with low overpotentials of 183 mV and 216 mV for the HER at the current density 10 mA cm⁻² in 1.0 M KOH and 0.5 M H₂SO₄ solution. The stability of the electrocatalyst could be well maintained for 24 h. These results indicate that the method to prepare hybrid (Ni-Mo_xC) is a simple way to produce cost-effective and high-efficient molybdenum carbide for hydrogen evolution.     

Interface engineering of the NiCo2O4@MoS2/TM heterostructure to realize the efficient alkaline oxygen evolution reaction

Electrochemical water splitting is considered as a promising strategy for the efficient hydrogen production, yet it is hindered by the sluggish oxygen evolution reaction (OER). Herein, heterostructure OER catalyst is fabricated by combining MoS₂ nanosheets with NiCo₂O₄ hollow sphere on Ti mesh. Benefiting from the heterogeneous nanointerface between NiCo₂O₄ and MoS₂, this electrocatalyst demonstrates excellent OER activity in basic environment with overpotentials of 313 and 380 mV achieving 10 and 100 mA cm⁻². The superb catalytic performance stems from hollow the nanostructure and interfacial engineering strategy that enhance intrinsic activity and provide faster charge transfer. Hence, this work provides a feasible path for exploiting the high-efficient catalysts.     

Synthesis of MoS2 nanoparticles embedded,N, S co-doped mesoporous carbon via molten salt method as hydrogen evolution electrocatalyst under alkaline and neutral conditions

We developed a salt-template strategy to prepare MoS₂ nanoparticles (NPs) embedded, N, S co-doped carbons via the solid-state process. The addition of the inorganic salt played two main roles in the synthetic proceeding. First, the salts could be utilized as the templates to produce the mesopores, which could be removed by simple washing process. Second, the salts could promote the formation of MoS₂ NPs. The as-received electrocatalyst, K-G4.0T2.0Mo1.0, possessed high BET surface area of 446 m² g^?1, in addition to high double layer capacitance of 24.5 mF cm^?2 in the alkaline media. When evaluated as the electrocatalyst for hydrogen evolution reaction (HER), K-G4.0T2.0Mo1.0 demonstrated excellent performance in the alkaline and neutral medias. In details, K-G4.0T2.0Mo1.0 showed a low overpotential of 173 and 358 mV to afford 10 mA cm^?2 under alkaline and neutral conditions, respectively, as well as outstanding durability.     

Synergy between in-situ immobilized MoS2 nanosheets and TiO2 nanotubes for efficient electrocatalytic hydrogen evolution

MoS₂ electrocatalyst exhibits a significant potential to substitute platinum in hydrogen evolution reaction (HER), but its immobilization on practical supports is still challenging. Herein, a facile hydrothermal method is developed for in-situ immobilizing MoS₂ nanosheets on titanium nanotubes (TNTs) support. Easy to mount electrodes with a uniform and dense layer of MoS₂ on TNTs are achieved. An overpotential of ?200 mV_RHE is ample to deliver ?10 mA/cm² from an acidic medium. This overpotential is much lower than those of the electrodes developed by drop-casting MoS₂ on TNTs, glassy carbon (274 mV), and in-situ immobilized on Ti foil (264 mV). The results revealed that the synergy between the in-situ immobilized MoS₂ and TNTs enhances the electrochemical surface area and the adsorption capacity of hydronium ions. The electronic interaction between MoS₂ and TNTs facilitates the mobility of electrons and reduces the charge transfer resistance at the electrode/electrolyte interface.