FATIGUE LIFE PREDICTION OF NOTCHED COMPOSITE COMPONENTS

Abstract— The local stress/strain approach has been used to predict the fatigue lives of notched composite components. The method was based on a microstress analysis and the application of a multiaxial fatigue parameter incorporating the alternating strain components on the critical plane. This parameter was able to correlate the fatigue lives obtained under a variety of multiaxial loading and geometrical configurations, enabling a generalized fatigue life curve to be determined on the basis of limited experimental data.
The ability of the multiaxial fatigue parameter to relate the fatigue behaviour of composites was illustrated by predicting the locations of crack initiation sites in a unidirectional silicon carbide fibre reinforced titanium plate containing a circular hole tested under constant amplitude cyclic loading. The same approach was also successfully employed to predict the fatigue lives of graphite reinforced epoxy composite tubes with circular holes tested under several combinations of cyclic tension and torsion.     

CONSIDERATION OF MULTIAXIALITY IN FATIGUE LIFE PREDICTION USING THE CLOSURE CONCEPT

Abstract— Based on fracture mechanics a model has been developed for predicting the fatigue lifetime to initiate a crack of technical size (2 a ∼ .5mm) in engineering components under multiaxial-proportional loading. Using material data determined for uniaxial loading, the model describes and evaluates the elasto-plastic multiaxial notch stresses and strains using the effective range of the J -integral, Δ J _eff, as a crack tip parameter. Mean stresses, load sequence effects and various modes of crack propagation due to variable amplitude loading with individual multiaxiality ratios can be explicitly considered. The prediction accuracy of the model is demonstrated using experimental fatigue life data determined with unnotched specimens of FeE460 and A15083 for proportional fully-reversed constant and variable amplitude loading with various multiaxiality ratios.     

Multiaxial notch fatigue life prediction based on pseudo stress correction and finite element analysis under variable amplitude loading

A new computational methodology is proposed for fatigue life prediction of notched components subjected to variable amplitude multiaxial loading. In the proposed methodology, an estimation method of non‐proportionality factor (F) proposed by authors in the case of constant amplitude multiaxial loading is extended and applied to variable amplitude multiaxial loading by using Wang‐Brown's reversal counting approach. The pseudo stress correction method integrated with linear elastic finite element analysis is utilized to calculate the local elastic‐plastic stress and strain responses at the notch root. For whole local strain history, the plane with weight‐averaged maximum shear strain range is defined as the critical plane in this study. Based on the defined critical plane, a multiaxial fatigue damage model combined with Miner's linear cumulative damage law is used to predict fatigue life. The experimentally obtained fatigue data for 7050‐T7451 aluminium alloy notched shaft specimens under constant and variable amplitude multiaxial loadings are used to verify the proposed methodology and equivalent strain‐based methodology. The results show that the proposed methodology is superior to equivalent strain‐based methodology.     

Experimental Study on Non—proportional Multiaxial Strain Cyclic Characteristics and Ratcheting of U71Mn Rail Steel

An experimental study was carried out on the strain cyclic characteristics and ratcheting of U71Mn rail steel subjected to non-proportional multiaxial cyclic loading.The strain cyclic characteristics were researached under the strain-controlled circular load path.The ratcheting was investigated for the stress-controlled multiaxial circular,elliptical and rhombic load paths with different mean stresses,stress amplitudes and their histories.The experiment shows that U71Mn rail steel features the cyclic non-hardening/softening, and its strain cyclic characteristics depend greatly on the strain amplitude but slightly on its history.However,the ratcheting of U71Mn rail steel depends greatly not only on the values of mean stress and stress amplitude,but also on their histories.In the meantime,the shape of load path and its history also apparently influence the ratcheting.The ratcheting changes with the different loading paths.     

Deformation behaviour,short crack growth and fatigue livesunder multiaxial nonproportional loading

Experimental results of a research project on short crack growth under multiaxial nonproportional loading are presented. Fatigue lives, crack growth curves and the deformation behaviour of hollow tube specimens and notched specimens were investigated under combined tension and torsion loading. The results served as basis for the development of a cyclic plasticity model [Döring R, Hoffmeyer J, Vormwald M, Seeger T. A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading. In: Comput Mater Sci. 28(3–4);2003:587–96; Döring R, Hoffmeyer J, Seeger T, Vormwald M. Constitutive modelling of nonproportional hardening, cyclic hardening and ratchetting. In: Proceedings of the seventh international conference on biaxial/multiaxial fatigue and fracture, DVM, Berlin; 2004. p. 291–6; Hoffmeyer J. Anrisslebensdauervorhersage bei mehrachsiger Beanspruchung auf Basis des Kurzrisskonzepts. PhD-Thesis, TU Darmstadt; 2004.] and a short crack model [Hoffmeyer J. Anrisslebensdauervorhersage bei mehrachsiger Beanspruchung auf Basis des Kurzrisskonzepts. PhD-Thesis, TU Darmstadt; 2004; Döring R, Hoffmeyer J, Seeger T, Vormwald M. Fatigue lifetime prediction based on a short crack growth model for multiaxial nonproportional loading. In: Proceedings of the seventh international conference on biaxial and multiaxial fatigue and fracture, DVM, Berlin; 2004. p. 253–8].Stress–strain paths including nonproportional hardening and experimental fatigue lives of the unnotched specimens under different loading cases are discussed and compared with calculations. Load-time-sequences were in-phase, 45° and 90° out-of-phase loading with constant and variable amplitudes, torsion without and with superimposed static normal stress, and strain paths like box, butterfly, diamond and cross path. For the notched specimens fatigue lives under 0° and 90° out-of-phase loading are compared with calculations based on finite element results and the short crack model. During some tests the initiation, growth and orientation of short cracks was studied using the plastic replica technique.     

Biaxial fatigue for proportional and non‐proportional loading paths

In order to study the use of a local approach to predict crack‐initiation life on notches in mechanical components under multiaxial fatigue conditions, the study of the local cyclic elasto‐plastic behaviour and the selection of an appropriate multiaxial fatigue model are essential steps in fatigue‐life prediction. The evolution of stress–strain fields from the initial state to the stabilized state depends on the material type, loading amplitude and loading paths. A series of biaxial tension–compression tests with static or cyclic torsion were carried out on a biaxial servo‐hydraulic testing machine. Specimens were made of an alloy steel 42CrMo4 quenched and tempered. The shear stress relaxations of the cyclic tension–compression with a steady torsion angle were observed for various loading levels. Finite element analyses were used to simulate the cyclic behaviour and good agreement was found. Based on the local stabilized cyclic elastic–plastic stress–strain responses, the strain‐based multiaxial fatigue damage parameters were applied and correlated with the experimentally obtained lives. As a comparison, a stress‐invariant‐based approach with the minimum circumscribed ellipse (MCE) approach for evaluating the effective shear stress amplitude was also applied for fatigue life prediction. The comparison showed that both the equivalent strain range and the stress‐invariant parameter with non‐proportional factors correlated well with the experimental results obtained in this study.     

Werkstoffmechanische Beanspruchungsanalyse gekerbter Strukturen bei synchronen Belastungskombinationen

Elastic‐Plastic analysis of notched structures under synchronous cyclic loading This paper focuses on analysing the elastic‐plastic stress‐strain behaviour at the failure‐critical location of notched components and structures under multiaxial synchronous cyclic loading. For this, various load configurations are investigated numerically consisting of constant and cyclic load components with constant and variable amplitudes. The von Mises yield criterion and the kinematic hardening rule of Prager and Ziegler describe the elastic‐plastic material property. The finite element software of ABAQUS is used to solve the boundary element problem. A parametrical study is carried out and numerical results are presented to show the effects of load amplitude, mean load and spectrum shape on the local stress‐strain paths.     

Lebensdauer von Schweißverbindungen unter mehrachsigen Belastungen mit variablen Amplituden – Schadensakkumulation und Hypothese der wirksamen Vergleichsspannung

Fatigue Life of Welded Joints under Multiaxial Variable Amplitude Loading – Damage Accumulation and the Effective Equivalent Stress Hypothesis Flange‐tube joints from fine grained steel FeE 460 with different notch factors were investigated under biaxial constant and Gaussian variable amplitude loading (bending and torsion) in the range of 10⁴ to 5 · 10⁶ cycles to crack initiation and break‐through, respectively. In order not to interfere with residual stresses they were stress relieved by a heat treatment. Damage accumulation under a Gaussian spectrum can be assessed for in‐ and out of phase combined bending and torsion using an allowable damage sum of 0.35 for weldments in the as‐welded state and 0.16 for joints with machined weldments with a lower notch factor of the critical area. For the evaluation of multiaxial in‐ and out‐of‐phase stresses the introduced hypothesis of the effective equivalent stress leads to good results. For this, the knowledge of local strains or stresses is necessary. This hypothesis considers the fatigue‐life reducing influence of out‐of‐phase loading by taking into account the interaction of local shear stresses acting in different surface planes of the material. Further, size effects resulting from the weld geometry and loading mode were included.     

Numerical and experimental validation of residual stresses of laser‐welded joints and their influence on the fatigue behaviour

In this work laser‐welded tube‐tube specimens made of aluminium alloys AlMg3.5Mn and AlSi1MgMn T6 were experimentally tested under constant and variable amplitude loading, under pure axial and pure torsion loading. In order to evaluate the influence on fatigue behaviour of the residual stresses, because of the welding process, some specimens were subjected to postweld heat treatment and then were tested. The numerical analyses, using finite element (FE), were carried out to obtain a reliable estimation of the residual stress in the specimen. The numerical results were in a good agreement with experimental ones obtained by means of hole‐drilling method. Finally, the residual stress distribution was superimposed to stress distribution because of fatigue loads obtained by FE analyses applying local concept, to calculate the stresses in the crack initiation zone and to understand the different types of failure that occurred in as‐welded and relieved specimens.     

Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations

The ratcheting and strain cyclic characteristics of U71Mn rail steel were experimentally researched under uniaxial and non-proportionally multiaxial cyclic loading at room temperature. The effects of cyclic strain, stress and their histories on strain cyclic characteristics and ratcheting were studied, respectively. It is shown that: U71Mn rail steel exhibits a cyclic stabilization and non-memorization for previous loading history under strain cycling; however, the ratcheting of the material depends greatly not only on the current values of mean stress and stress amplitude, but also on their histories; the non-proportionality of multiaxial loading path only causes a negligible additional hardening for the material. Based on the Ohno–Wang non-linear kinematic hardening model [Int. J. Plast. 9 (1993) 375, 391], the uniaxial and multiaxial ratcheting behaviours of the material were simulated by a visco-plastic constitutive model. The simulated results are in good consistence with the experimental ones.     

Fatigue assessment of laserbeam‐welded aluminium joints under multiaxial loading

This paper presents the results and evaluation of the multiaxial fatigue behaviour of laserbeam‐welded overlapped tubular joints made from the artificially hardened aluminium alloy AlSi1MgMn T6 (EN AW 6082 T6) under multiaxial loadings with constant and variable amplitudes. Several fatigue test series under pure axial and pure torsional loadings as well as combined axial and torsional proportional and non‐proportional loadings have been carried out in the range of 2·10⁴ to 2·10⁷ cycles. The assessment of the investigated thin‐walled joints is based on a local notch stress concept. In this concept the fatigue critical area of the weld root is substituted by a fictitious notch radius r_ref = 0.05 mm. The equivalent stresses in the notch, considering especially the fatigue life reducing influence of non‐proportional loading in comparison to proportional loading, were calculated by a recently developed hypothesis, which is called the Stress Space Curve Hypothesis (SSCH). This hypothesis is based on the time evolution of the stress state during one load cycle. In addition, the fatigue strength evaluation of multiaxial spectrum loading was carried out using a modified Gough‐Pollard algorithm.     

A high-cycle fatigue life model for variable amplitude multiaxial loading

A high‐cycle fatigue life model for structures subjected to variable amplitude multiaxial loading is presented in this paper. It treats any kind of repeated blocks of variable amplitude multiaxial loading without using a cycle counting method. This model based on a mesoscopic approach is characterized by the following features: (i) the choice of a damage factor related to the accumulated mesoscopic plastic strain per stabilised cycle; (ii) the use of a mesoscopic mechanical behaviour taking into account the fatigue mechanisms such as plasticity and void growth. This behaviour is a von Mises elastoplastic model with linear kinematic hardening and hydrostatic stress dependent yield stress. The fatigue life model has six parameters identified with one SN curve and two fatigue limits. In‐phase and out‐of‐phase experimental tests from the literature are simulated. The predicted fatigue lives are compared to experimental ones.     

Fatigue strength of welded joints under multiaxial loading: experiments and calculations

In reality most welded components are loaded with a combination of different variable forces and moments that often cause a state of multiaxial stress in the fatigue-critical areas. If the multiaxial loading is non-proportional, traditional deformation-based hypotheses are not able to give a reliable lifetime prediction. This investigation is a cooperation between three German research institutes to build an experimental database for the verification of different concepts of lifetime prediction. In accordance with former investigations, a flange-tube connection made of steel P460 was used. The test program was divided into constant amplitude and variable amplitude tests. The ratio between the nominal bending and shear stress is 1. For the variable amplitude tests, a Gaussian-standard is used. A lifetime prediction software for multiaxial state of cyclic stress was developed. The software has a modular structure and allows calculations with different hypotheses and methods. The calculations are based on the local elastic stresses. This is an acceptable method for high-cycle fatigue. In this work, two general types of calculation, the Integral Approach and Critical Plane Approach and a local stress-based modification of the von Mises Criterion, the hypothesis of effective equivalent stress (EESH) are shown. The damage accumulation is performed with the elementary Miner's rule ( S – N curve without fatigue limit). The statistical distributions of the damage sums are also shown.     

Multiaxial fatigue and life prediction of elastomeric components

Elastomeric components have wide usage in many industries. The typical service loading for most of these components is variable amplitude and multiaxial. In this study a general methodology for life prediction of elastomeric components under these typical loading conditions was developed and illustrated for a passenger vehicle cradle mount. Crack initiation life prediction was performed using different damage criteria. The methodology was validated with component testing under different loading conditions including constant and variable amplitude in-phase and out-of-phase axial–torsion experiments. The optimum method for crack initiation life prediction for complex multiaxial variable amplitude loading was found to be a critical plane approach based on maximum normal strain plane and damage quantification by cracking energy density on that plane. Rainflow cycle counting method and Miner’s linear damage rule were used for predicting fatigue life under variable amplitude loadings. The fracture mechanics approach was used for total fatigue life prediction of the component based on specimen crack growth data and FE simulation results. Total fatigue life prediction results showed good agreement with experiments for all of the loading conditions considered.     

Proportional/nonproportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity,non‐zero mean stresses,and critical distance/plane

This paper deals with the formulation and experimental validation of a novel fatigue lifetime estimation technique suitable for assessing the extent of damage in notched metallic materials subjected to in‐service proportional/nonproportional constant/variable amplitude multiaxial load histories. The methodology being formulated makes use of the Modified Manson‐Coffin Curve Method, the Shear Strain–Maximum Variance Method, and the elasto‐plastic Theory of Critical Distances, with the latter theory being applied in the form of the Point Method. The accuracy and reliability of our novel fatigue lifetime estimation technique were checked against a large number of experimental results we generated by testing, under proportional/nonproportional constant/variable amplitude axial‐torsional loading, V‐notched cylindrical specimens made of unalloyed medium‐carbon steel En8 (080M40). Specific experimental trials were run to investigate also the effect of non‐zero mean stresses as well as of different frequencies between the axial and torsional stress/strain components. This systematic validation exercise allowed us to demonstrate that our novel multiaxial fatigue assessment methodology is remarkably accurate, with the estimates falling within an error factor of 2. By modelling the cyclic elasto‐plastic behaviour of metals explicitly, the design methodology being formulated and validated in the present paper offers a complete solution to the problem of estimating multiaxial fatigue lifetime of notched metallic materials, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history.     

Fatigue behavior of ferritic–pearlitic–bainitic steel in loading with positive mean stress

The effect of positive mean stress on the fatigue behavior of ferritic–pearlitic–bainitic steel has been studied. Specimens, produced from a massive forging, were cycled with two constant stress amplitudes and various positive mean stresses. Plastic strain amplitude and cyclic creep rate were measured during cyclic loading and the effect of the mean stress on saturated plastic strain amplitude and mean strain at half-life was established. Plastic strain amplitude is weakly dependent but creep strain increases with the mean stress exponentially. Fatigue life decreases with the mean stress for both stress amplitudes. The contributions of cyclic plastic strain and cyclic creep to the fatigue damage were evaluated and discussed in relation with the Manson-Coffin curve.     

在多轴载荷下45钢的循环特性

通过多轴疲劳试验，研究了在多轴加载条件下45钢的循环特性变化规律，分析了非比例附加强化、多轴循环软化/硬化特性及疲劳寿命对加载路径参数的依赖性，结果表明，相位角主要影响非比例附加强化程度，幅值比主要影响多轴循环软化/硬化特性，二者都影响多轴疲劳寿命。     

Verfahren zur Festigkeitsbeurteilung von mehrachsig stochastisch beanspruchtem Spräroguß und Temperguß

Method for a Strength Evaluation of Multiaxial Stochastic Loaded Nodular and Malleable Iron There will be presented a method for an analytic strength evaluation of multiaxial stochastic loaded components (method of reference stress). For the failure of the investigated casted material, breaking up events which are caused by a nominal stress in the maximal stressed sectional plane are responsible and which can be described by a ?reference stress”?. This ?Reference stress”?, which in its meaning corresponds to an equivalent stress, can be understood not only as a value related to material behaviour, but takes also into account statistical aspects basing on the independence of random values. For a strength evaluation they are compared with the corresponding uniaxial nominal stress. The methodology was verified by multiaxial fatigue tests under combined tensional and torsional loading.     

Multiaxial fatigue assessment of welded joints – Recommendations for design codes

In the assessment of welded joints submitted to multiaxial loading the calculations method applied, independently of the concept (nominal, structural, hot-spot or local), must consider primarily the materials ductility. While proportional loading can be assessed by von Mises, the principal stress hypothesis, the Findley method or the Gough–Pollard relationship, using any of the mentioned concepts, difficulties occur when the loading is non-proportional, i.e. the principal stress (strain) direction changes. This causes a significant fatigue life reduction for ductile steel welds, but an indifferent behaviour for semi-ductile aluminium welds. This different response to non-proportional loading can be assessed when ductility related mechanisms of fatigue failures, i.e. the mean value of plane oriented shear stresses for ductile materials and a combination of shear and normal stresses for semi-ductile materials, are properly considered.However, as these methods require a good expertise in multiaxial fatigue, for design codes used by non-fatigue experts, simpler but sound calculation methodologies are required. The evaluation of known fatigue data obtained with multiaxial constant and variable amplitude (spectrum) loading in the range N > 10⁴ cycles suggests the application of the modified interaction algorithm of Gough–Pollard. In the case of variable amplitude loading, constant normal and shear stresses are replaced by modified reference normal and shear stresses of the particular spectrum. The modification of the reference stresses is based on the consideration of the real Palmgren–Miner damage sum of D_PM = 0.5 (for spectra with constant mean loads) and the modification of the Gough–Pollard algorithm by consideration of the multiaxial damage parameter D_MA = 1.0 or 0.5, which is dependent on the material’s ductility and on whether the multiaxial loading is proportional or non-proportional. This method is already part of the IIW-recommendations for the fatigue design of welded joints and can also be applied by using hot-spot or local stresses.     

Einfluß von last- und verformungsgesteuerten mehrachsigen Beanspruchungen auf die Anrißlebensdauer

Influence of load- and deformation-controlled multiaxial tests on fatigue life to crack initiation Generally, areas of components with notches or geometrical transitions are critical because of the resulting stress/strain concentrations. In these areas due to the stress-gradients and constraint local deformations are displacement controlled even if the material's yield stress is exceeded, as long as the deformations are below the structural yield point. Therefore, load controlled tests in the elasto-plastic region with unnotched specimens from ductile materials under combined axial loading and torsion are not suitable for the interpretation of component's behaviour because of uncontrolled local deformations. Thus, the influence of multiaxial stress/strain states on the fatigue behaviour of a component under elasto-plastic deformations can be determined reliably with unnotched specimens only by deformation controlled tests, if cyclic creep is not expected in critical areas.