第三代燃烧新技术-多孔介质燃烧技术研发及应用

本文系统地介绍多孔介质燃烧新技术。首先对该技术的现状进行了总体介绍,接着对其概念进行了剖析,然后介绍了该技术在国内外的研究现状,最后介绍了该技术的应用现状,对宝钢实现的应用也进行了简单的介绍。     

线材产线使用的油气系统及供油方案

本文介绍了油气润滑系统的背景及原理,介绍了邢钢线材厂的3中油气润滑系统及其优缺点,还介绍了邢钢线材厂在工作中总结的最佳油气供油方案。     

260t鱼雷罐体制作工艺的研制

鱼雷罐是鱼雷型混铁车的关键部件之一,主要用于承载高温铁水。文章介绍了260t鱼雷罐体的研制过程,主要对鱼雷罐体的制作工艺进行了介绍,介绍制作的焊接、加工过程。着重介绍了罐体的组对过程和组对工装。     

包钢供电调度自动化工作站系统

本文介绍了包钢最新开发的包钢供电厂电力调度自动化系统,重点介绍了其中的工作站子系统,对工作站的硬件设计、软件功能的实现进行了详细的介绍。     

配煤技术的发展

系统介绍了近几十年来配煤技术的发展及其应用情况,也介绍了焦炭质量预测的几种方法,重点介绍了专家配煤系统,并探讨了当前配煤的研究方向。     

浅谈室内装修带来的环境影响及治理手段

介绍了室内装修、装饰及室内环境污染的意义,分析了产生室内环境污染的原因,介绍了室内装修、装饰材料的选择方法及应注意的事项,简单介绍了控制及减少室内环境污染的做法.     

钛及钛合金新工艺、新技术、新用途介绍

本文介绍了钛及钛合金的基本性质,然后分别介绍了钛和钛合金的传统制备工艺和技术,并指出各自的新工艺、新技术,最后介绍了钛及钛合金的新用途。     

浅述新型模具钢在太钢的开发

介绍了开发新型模具钢的重要性,介绍了太钢生产的一些模具钢品种,重点介绍了开发出的热作模具钢A和塑料模具钢B。通过开发新型模具钢,企业取得了较好的经济效益和社会效益,锻炼了科研开发队伍,提高了企业的市场竞争力。     

济钢50MN宽厚板压平机控制系统

介绍了济钢宽厚板厂50 MN压平机系统的工艺过程、设备组成,然后详细介绍了压平机自动控制系统的组成,最后介绍了50 MN压平机系统的应用情况和所创造的经济效益。     

广东佛山东平大桥钢结构制作总体工艺

本文介绍了广东佛山东平大桥钢结构制作工艺,对变截面钢箱拱线形控制工艺措施、桥面格子梁栓接孔群加工工装及工艺、吊杆立柱等构件配合精度控制工艺进行了重点介绍,同时对在施工过程中焊接工艺、预拼装工艺的优化进行了介绍,并简单介绍了成桥架设的总体工艺方案     

银含量对方铅矿浮选的影响及其机理研究进展

为了阐明银含量对方铅矿浮选的影响,提高含银方铅矿中伴生银的综合回收效率,通过全面梳理前人研究成果,对含银方铅矿的资源状况、工艺流程和药剂制度进行了总结。首先,从不同维度和层面（从试验到模拟、从宏观到微观）综述了银含量对方铅矿的影响,其中包括银含量对方铅矿浮选行为及表面接触角的影响。然后,评述了前人利用红外光谱、微热动力学、电化学和量子化学等分析方法开展的有关银含量对方铅矿浮选行为影响机理的研究进展,上述分析方法相互验证,均证实银矿物对方铅矿的浮选有促进作用,且银含量与促进程度呈正相关。最后,针对含银方铅矿今后研究方向和银铅锌矿资源开发,提出科学、合理的建议,如：在现场生产中应尽量避免使用石灰调浆,如必须使用时,应控制好石灰用量,从而减少伴生银的损失。     

Measuring students' connectedness to school, teachers, and family: Validation of three scales.

Connectedness to school, teachers, and family are all significant protective factors in adolescents' lives, yet the measurement of each varies considerably. This article describes the measurement properties of three composite scales of adolescent connectedness, adapted from the Add Health study and the California Healthy Kids Survey. These composite scales are created by either summing or taking the mean of all individual items, measured on an ordinal scale. This approach fails to account for the ordinal, non-normal nature of the data. Using a covariance approach, this article describes the measurement properties of the latent constructs of connectedness to school, teachers, and family and the contribution of each of the items used to compile the relevant composite score. The outcomes of this study will provide researchers and practitioners with information about the validity, reliability, and overall usefulness of each of the measures of adolescents' perception of their connectedness to school, teachers, and family. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

火焰原子吸收光谱法测定合金结构钢中铬、锰

利用火焰原子吸收光谱法测定合金结构钢中铬、锰,此方法快速、准确、灵敏度高、精密性好,方法简便,并充分反应了现代仪器的高科技分析手段。合金结构钢使用较为广泛,因此利用原于吸收光谱法测定铬、锰,能迅速有效的达到检测目地的需要。本方法改变了以往化学法操作时间长、步骤多、消耗试剂多的弊病,解决了高氯酸氧化铬对人体的危害及对环境的严重污染。通过对各项做条件试验,优选了最佳仪器测试条件。对干扰元素铁、镍抑制铬的吸收,采用硫酸钠做干扰消除剂,彻底消除了干扰,测定数据稳定可靠。经过对标准样品的测定,重复性好,误差小,回收率达到99～102%,效果令人满意。     

Leaching Behavior of Lead, Chromium (III), and Zinc in Cement/Metal Oxides Systems

This paper reports the study of the leaching behavior of cement/metal oxides mixtures containing lead, chromium (III) and zinc oxides. A fractional factorial design of experiments (24?1) was carried out considering four factors, the concentration of ZnO, Cr2O3, PbO, and Fe2O3 in the formulations. Iron oxide was also included in the experimental design as it is usually the main constituent of industrial wastes from thermal processes, where lead, chromium and zinc oxides are also found. After 56 days of curing, samples were subjected to the Acid Neutralization Capacity Test and the concentrations of Cr, Zn, and Pb were determined in the leachate at different pH after filtering. The output variables for the analysis of the experimental data were the concentration of metals at initial pH (in water), at pH 9, 7, and 4, and the acid neutralization capacity of the samples at pH 9. The analysis of the results indicates that the immobilization of Zn and Pb in Portland cement is poor; these metals behave as their amphoteric hydroxides. However, the leaching of Cr (III) is in the range found in the control sample, indicating that the stabilization of Cr (III) is successful.     

Reservoir Bank Deformation Modeling: Application to Grangent Reservoir

Within inshore or fluvial environments, submerged fine matter mud banks are characterized by a high water content, a great spatial variability, and a strong deformability. The study of their instabilities induced by the variation of hydraulic stress requires a coupled modeling of sliding, erosion, and deposition mechanisms. In order to predict the impact of dam reservoir emptying on the stability of immersed upstream slopes, the method of approach to the problem proposed here combines theoretical developments, numerical modeling, site observations, and measurements. First, the theoretically achieved sliding criterion is compared with unstable mud height measurements. For more accuracy in the representation of the natural events, the sliding criterion is then integrated within a numerical code which couples the computation of hydrodynamic conditions, the erosion, and deposition of mud and the banks sliding. Finally, the results of the combination of all these mechanisms are compared with the variations in the bathymetric profiles obtained on the experimental site.     

Al2O3对酒钢低铝渣黏度的影响及热力学分析

为进一步分析Al2O3含量对低铝渣黏度的影响,以酒钢高炉渣成分为基础,通过试验和FactSage热力学软件分别研究了不同Al2O3含量炉渣的黏度、液相线温度、活度和冷却结晶过程的物相变化。结果表明,在本试验的低铝渣范围内,随Al2O3含量增加,炉渣黏度增大,在1 450 ℃以上黏度低于0.45 Pa·s,炉渣流动性和稳定性良好。Al2O3活度随Al2O3含量的增加而增大,相反,SiO2活度降低也证明炉渣聚合度的增大。炉渣的冷却结晶过程则表明,在液相线温度以上时,炉渣黏度主要与炉渣结构的复杂程度有关;在液相线温度以下时,黏度受液相炉渣结构和固相颗粒含量的共同影响。     

保护渣对430不锈钢铸坯边部凹陷缺陷的影响

针对太钢430不锈钢铸坯边部凹陷严重的问题,采用Gleeble 3800、高温原位分析仪、黏度分析仪等技术手段,系统研究430铸坯边部凹陷缺陷的产生机理和保护渣性能对边部凹陷的影响规律。研究结果表明,430铸坯边部凹陷缺陷的主要原因与保护渣的控制传热有关。保护渣碱度过小,结晶能力弱,坯壳在结晶器内冷却强度大,凝固收缩带来较大的角部扭动力而产生边部凹陷,此时铸坯边部凹陷主要发生在结晶器内;保护渣碱度过大,结晶能力强,铸坯冷却强度不够,出结晶器的坯壳厚度薄,在钢水静压力的作用下铸坯宽度产生延展效应,导致后续产生较大的凝固收缩而形成边部凹陷,此时铸坯边部凹陷主要发生在二冷阶段。保护渣碱度控制为1.00,保护渣的结晶能力适宜,既避免了结晶器内强冷带来的铸坯凹陷,又保证了出结晶器坯壳足够的厚度和强度,最终使铸坯边部凹陷深度由1.26 mm降低至0.30 mm,显著改变了铸坯表面质量。     

MgO对烧结矿液相形成性能和微观结构特性的影响

为了探究MgO对烧结矿液相形成性能和微观结构特性的影响,采用Factsage 7.1热力学软件模拟分析了MgO对烧结矿液相形成性能的影响,并且开展了不同MgO含量的烧结杯试验研究。研究表明,随着MgO含量增加,烧结矿理论液相生成量减少,液相黏度降低,液相中w(Fe₂O₃)/w(CaO)增加,使得混合料中CaO的活度提高,铁酸钙相形成的热力学条件改善;当MgO质量分数由1.60%提高至1.90%,一方面,烧结矿矿相组成中枝晶状铁酸钙相含量增加,针状及板柱状铁酸钙相发展受到抑制,铁酸钙黏结相总量降低,硅酸盐相含量增加,导致液相黏结包裹矿粉颗粒能力变差,固结强度性能受到不利影响;另一方面,由于MgO是高熔点物质,矿化反应过程中,MgO易固溶进入磁铁矿晶格,并在高温固相反应中形成难熔物相,使得烧结矿磁铁矿相含量增加,赤铁矿相含量减少,从而降低烧结矿低温还原反应过程中产生的晶格结构畸变应力,改善低温还原粉化性能。     

基于机器学习的钢铁轧制过程性能预测

 为了实现快速的热轧工艺优化设计,基于工业数据的钢铁材料性能预测引起了研究者的极大关注,对利用机器学习进行钢铁材料轧制过程性能预测的研究进展进行了梳理。首先介绍了钢铁材料轧制过程性能预测常用的主流机器学习算法,其中包括人工神经网络、模糊神经网络、支持向量机、随机森林、智能优化算法等。其次,分别对钢铁材料轧制过程性能预测建模方法研究进展和模型应用情况进行了综述。最后,对钢铁轧制过程性能预测研究进行了展望,指出了数据质量的改善、小样本数据建模、建模数据加密、模型可解释性研究、钢铁材料组织预测和利用模型进行有效的工艺优化设计等可能发展方向。     

Impressions of psychotherapists' offices.

For counseling settings, research suggests that softness, personalization, and order might affect the experience and the perceived expertness, trustworthiness, and social attractiveness of the therapist. This article discusses exploratory studies on college students' perception of the counseling office environment and whether the likely client experience was associated with the softness/personalization and order of the office. As stimuli, the studies used 30 color photographs of psychotherapists' offices viewed from the client's perspective. After obtaining ratings of the characteristics of each office, we obtained ratings from different groups of students of the quality of care and comfort expected in each office (Study 1) and how qualified, bold, and friendly the therapist in the office would be (Study 2). Additional studies examined the likelihood of choosing a therapist based on the office, and the first thought or feeling that came to mind about the office, the therapist, and the patient experience. There were strong correlations in response between groups (by whether they had experienced therapy; their level in school; their gender; and their major, location, and school size). The quality of care, comfort, therapist boldness, qualifications of the therapist, and the likelihood that one would choose a therapist based on the office improved with increases in the office's softness/personalization and order. Friendliness improved with increases in softness/personalization. The office choices, open-ended responses, and reported reasons for the ratings confirmed the importance of softness (comfort) and order. Research should test longer term exposure and behavior. (PsycINFO Database Record (c) 2011 APA, all rights reserved)