Dye adsorption and desorption properties of Mentha pulegium in single and binary systems

This article deals with the dye adsorption and desorption properties of Mentha pulegium (MP) from single and binary (mixture of dyes) systems. Direct Red 80 (DR80) and Acid Black 26 (AB26) were used as model dyes. The Fourier transform infrared (FTIR) was used to investigate the biosorbent characteristics. The effects of biosorbent dosage, contact time, dye concentration, salt, and pH on dye removal were studied. The biosorption isotherms, kinetics, and thermodynamic were studied. In addition, dye desorption was carried out to study adsorbent recovery. The results showed that the isotherm data of single and binary systems of dyes followed the Langmuir isotherm. The adsorption kinetic of the dyes was found to conform to a pseudosecond order kinetic model. Desorption tests showed maximum dye releasing of 97% for DR80 and 95% for AB26 in single system and 92% for DR80 and 94% for AB26 in binary system of dyes at pH 12. The thermodynamic data showed that the biosorption process is spontaneous, endothermic, and a physisorption reaction. It can be concluded that MP is an ecofriendly biosorbent to remove dyes from single and binary systems. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Adsorption of anionic dyes on poly(epicholorohydrin dimethylamine) modified bentonite in single and mixed dye solutions

The performance of poly(epicholorohydrin dimethylamine) modified bentonite (EPIDMA/bentonite) as an adsorbent to remove anionic dyes, namely Direct Fast Scarlet, Eosin Y and Reactive Violet K-3R, was investigated in single, binary and ternary dye systems. In adsorption experiments in single dye solutions, the adsorption of the three dyes onto EPIDMA/bentonite was described by the Langmuir isotherm model and the pseudo-second-order kinetic model. At low dosage of EPIDMA/bentonite, preferential adsorption was observed for the dye with higher affinity to the adsorbent in mixed dye systems. The reduction in uptake of the dye with increasing equilibrium dye concentration in the isotherm and desorption in the kinetic curves were observed for the dye with lower affinity. The total amount of dyes adsorbed versus the total equilibrium dye concentrations were fitted well by the Langmuir isotherm model. The kinetics of the total adsorbed amount of dyes followed the pseudo-second-order kinetic model. The effect of the dosage of adsorbent on color removal efficiency, residual color distribution and adsorption kinetics was investigated.     

Surfactant‐modified feldspar: Isotherm,kinetic, and thermodynamic of binary system dye removal

In this article, surface modification of feldspar using hexadecyltrimethyl ammonium bromide (HDTMA) and its dye removal ability in single and binary systems was studied. Acid Black 1 (AB1) and Acid Red 14 (AR14) were used as model dyes. The monocomponent Langmuir isotherm model was applied to experimental data and the isotherm constants were calculated for both dyes. The monolayer coverage capacities of surfactant‐modified feldspar (HDTMA‐feldspar) for AB1 and AR14 dyes in single solution system were found as 6.369 mg/g and 3.984 mg/g, respectively. It was observed that the equilibrium uptake amounts of AB1 and AR14 dye in binary mixture onto sorbent decreased with increasing concentrations of the other dye resulting in their antagonistic effect. Equilibrium adsorption for binary systems was analyzed by using the Extended Langmuir and Jain and Snoeyink Modified Extended Langmuir models. The rate of kinetic processes of single and binary dye systems onto adsorbent was described by using two kinetics adsorption models. The pseudo‐second‐order model was the best choice among the kinetic models to describe the adsorption behavior of single and binary dyes onto HDTMA‐feldspar. Thermodynamic parameters showed that dye adsorption on HDTMA‐feldspar were exothermic and unspontaneous in nature. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of cationic polymeric adsorbent and dye removal isotherm,kinetic and thermodynamic

Poly(quaternary ammonium salt) (PQAS) as a cationic polymeric adsorbent was synthesized and characterized by FTIR. Isotherm, kinetic and thermodynamic of dye removal from single and binary systems was investigated. Acid Blue 25 (AB25) and Acid Red 18 (AR18) were used. The effect of operational parameters (adsorbent dose, pH, dye concentration and salt) on dye removal was studied. The dye removal followed the Langmuir isotherm and pseudo-first order kinetics. The adsorbent maximum dye adsorption capacity (Q₀) was 2000 and 1667 mg/g for AB25 and AR18, respectively. The thermodynamic data showed that dye adsorption was spontaneous, endothermic, and a physisorption reaction.     

Isotherm,Kinetic, and Thermodynamic of Cationic Dye Removal from Binary System by Feldspar

In this paper, the isotherm, kinetic, and thermodynamic of cationic dye removal onto inorganic adsorbent (Feldspar) were investigated in single and binary systems. Basic Red 18 (BR18) and Basic Blue 41 (BB41) were used as cationic dyes. The characterization of the Feldspar was carried out using X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) techniques. The effect of operational parameters such as adsorbent dosage, initial dye concentration, pH, ionic strength, and temperature on dye removal was studied. It was found that the adsorption of BR18 and BB41 onto Feldspar followed with Langmuir and extended Langmuir isotherms in single and binary systems, respectively. Adsorption kinetic of dyes was found to conform to pseudo-second order kinetic in single and binary system. The thermodynamic data showed that dye adsorption onto Feldspar was spontaneous, endothermic, and physisorption reaction. Based on the data of the present investigation, one could conclude that the Feldspar as an eco-friendly and low-cost adsorbent might be a suitable alternative to remove dyes from colored aqueous solutions containing cationic dyes.     

Competitive adsorption of Direct Yellow 12 and Reactive Orange 12 on ZnS:Mn nanoparticles loaded on activated carbon as novel adsorbent

A novel adsorbent (ZnS:Mn nanoparticles loaded on activated carbon) was made. The competitive adsorption of Direct Yellow 12 (DY12) and Reactive Orange 12 (RO12) dyes in binary mixture onto this adsorbent was studied. DY12 and RO12 with severe spectra overlapping were chosen and analyzed simultaneously with high accuracy by first order derivative spectrophotometric method in binary solutions. The effect of multi-solute systems on the adsorption capacity was investigated. Because of the specific characteristics of ZnS:Mn-NP-AC was found to be efficient for the removal of the dyes studied. The adsorption capacities were investigated and described by the mono- and multi-component Langmuir and Freundlich isotherm models for both single and binary dye solutions. The isotherm constants for DY12 and RO12 were calculated. For single solution of DY12 and RO12 dyes, the adsorption capacities of the applied adsorbent were found to be 90.05 mg/g and 94.52 mg/g, respectively. Equilibrium uptake amounts of DY12 and RO12 in binary solution onto the applied adsorbent were found to be considerably decreasing with increasing the concentrations of the other dye. A better agreement between the adsorption equilibrium data and mono-component Langmuir isotherm model was found. However, at concentrations within moderate ranges, the extended Freundlich isotherm model satisfactorily predicted multi-component adsorption equilibrium data. An endothermic and a spontaneous nature for the adsorption of the dyes studied were shown from thermodynamic parameters.     

Preparation of an ecofriendly chitosan–ZnO composite for chromium complex dye adsorption

Three chitosan‐ZnO composites were prepared by the chitin deacetylation process using zinc chloride as source material and sodium hydroxide as precipitant. The physical characteristics of chitosan‐ZnO composites were studied using Fourier Transform infrared spectroscopy and scanning electron microscopy. The adsorption of a chromium complex dye onto commercial chitosan, prepared chitosan and chitosan‐ZnO composites was investigated in aqueous dye solution. Dye calibration was carried out by UV‐vis spectroscopy. The calculated dye adsorption values for commercial chitosan, prepared chitosan, and chitosan‐ZnO composite samples are 0.0086, 0.0137, and 0.0214 mg/g respectively, indicating that the chitosan‐ZnO composites have better dye adsorption capacity than commercial chitosan and prepared chitosan. The experimental isotherm data for the composites fitted the Langmuir isotherm model well. Thus, the chitosan‐ZnO composites can be used as an effective biosorbent for the removal of anionic dyes.     

Competitive Biosorption of Acid Dyes from Binary Solutions onto Enteromorpha prolifera: Application of the First Order Derivative Spectrophotometric Analysis Method

The biosorption of Acid Red 274 and Acid Red 337 dyes from single and binary solutions on Enteromorpha prolifera was investigated in a single stage batch system. The first order derivative spectrophotometry was tested in order to analyse the studied binary solutions of the selected dyes. The single- and multi-component Langmuir and Freundlich isotherm models were applied to the experimental equilibrium data and the isotherm parameters were estimated. It was observed that the uptake amounts of the first component decreased with increasing concentration of the second component from binary solution. As a result, the binary biosorption of AR274 and AR337 dyes on E.prolifera have an antagonistic effect. The binary biosorption of AR274 and AR337 dyes in a single stage batch system was modelled and the equilibrium concentrations of the exit stream were found by using the experimental equilibrium curves and operating lines for the biosorption of single and binary dye solutions.     

Sorption of acid dyes onto GLA and H2SO4 cross-linked chitosan beads

The feasibility of chitosan and cross-linked chitosan beads as efficient adsorbents for the removal of Acid Blue 25 (AB 25) and Acid Red 37 (AR 37) from aqueous solution was studied by using batch adsorption techniques. Glutaraldehyde (GLA) and sulphuric acid were employed as cross-linking reagents. The effect of process parameters like pH, agitation period, agitation rate and concentrations of dyes on the extent of AR 37 and AB 25 adsorption by chitosan and cross-linked chitosan beads was investigated. The best interpretation for the equilibrium data was given by the Langmuir isotherm, while the pseudo-second-order kinetic model could best describe the adsorption of these acid dyes. Thermodynamic parameters such as enthalpy change (ΔH°), free energy change (ΔG°) and entropy change (ΔS°) were estimated and adsorption process was spontaneous and exothermic. The desorbed chitosan, chitosan-GLA and chitosan-H₂SO₄ beads can be reused to adsorb the acid dyes. Results also showed that chitosan, chitosan-GLA and chitosan-H₂SO₄ beads were favourable adsorbers.     

Chitosan/polyaniline hybrid for the removal of cationic and anionic dyes from aqueous solutions

Nanostructured chitosan/polyaniline (CH/PANI) hybrid was synthesized via in situ polymerization of aniline in the presence of chitosan. The CH/PANI hybrid was characterized by FTIR spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The CH/PANI hybrid had a nanofibrous structure with an average diameter of 70 nm. This hybrid was employed as an ecofriendly and efficient adsorbent with high adsorption capacity for the removal of Acid Green 25 (AG) and methylene blue (MB) from aqueous solutions. AG and MB were used as anionic and cationic model dyes, respectively. The CH/PANI adsorbent showed high dependence on the pH of the medium with an excellent adsorption performance and regeneration manner. The kinetics and adsorption isotherms were studied. The CH/PANI hybrid follows the pseudo second-order adsorption kinetics and Temkin isotherm model for the adsorption of both AG and MB dyes. This assumes that the enthalpy of dyes molecules decreases with the adsorption on heterogeneous surface with various kinds of adsorption sites and as well as the ability to form multilayers of the dye. Also, intraparticle diffusion was found to play an important role in the adsorption mechanism. The maximum adsorption capacity was found to be 240.4 mg g⁻¹ of AG at pH 4 and 81.3 mg g⁻¹ of MB at pH 11. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47056.     

交联壳聚糖树脂对阴离子染料吸附性能的研究

以甲醛-环氧氯丙烷为交联剂,采用反向悬浮法制备了交联壳聚糖树脂(CCTSR).研究了染料溶液初始浓度、时间、pH值和温度等因素对壳聚糖树脂吸附C.I.活性19、C.L活性蓝21、酸性橙II的影响,并探讨了交联壳聚糖树脂对3种阴离子染料的吸附规律.实验结果表明:适宜的酸性条件及较高的染液初始浓度有利于提高CCTSR对三种染料离子的吸附性能;而温度对染料吸附呈现不同的影响趋势.交联壳聚糖树脂对这3种染料的吸附符合Langmuir吸附等温式和Freundlich吸附等温式,吸附动力学模型可以用准二级速率方程来描述.     

The pH influence on photocatalytic decomposition of organic dyes over A11 and P25 titanium dioxide

The photocatalytic removal (decomposition+adsorption) of four azodyes (Reactive Red 198, Acid Black 1, Acid Blue 7 and Direct Green 99) in water was investigated using Tytanpol A11 (“Police” Chemical Factory, Poland) and Degussa P25 (“Degussa”, Germany) as photocatalysts. The effect of pH of the reaction solution has been examined. The degree of the dye removal in the solution was measured by UV-Vis spectroscopy. Photodecomposition of dye on photocatalyst surface was monitored by FTIR spectroscopy. A11 photocatalyst has lower activity in the reaction of photocatalytic decomposition of organic dyes than Degussa P25. The photocatalytic decomposition of the dyes takes place on the photocatalyst surface at pH=2 while at pH=12 photocatalytic reaction proceeds via photogenerated hydroxyl radicals for both A11 and P25.     

Dyes Adsorption from Aqueous Solutions by Chitosan

In this study the ability of chitosan to remove acid, basic, reactive, and direct dyestuffs by adsorption was studied. The effect of several factors influencing dye adsorption such as dye concentration, grain size, pH, and temperature were investigated. Desorption of dyes at different pH was also examined. It was shown that the adsorption capacities of chitosan were comparatively high for acid and direct dyes and that the adsorption was controlled by the acidity of the solution. The kinetics of adsorption were found to be of pseudo second order. Batch isotherm studies showed that adsorption of dyes from aqueous solution by chitosan was described by the Langmuir equation.     

Adsorption of different dyes from aqueous solution using Si-MCM-41 having very high surface area

Adsorption characteristics of four different dyes Safranin O (cationic), Neutral Red (neutral), Congo Red (anionic) and Reactive Red 2 (anionic) on Si-MCM-41 material having very high surface area are reported. The surface morphology of Si-MCM-41 material before and after adsorbing dye molecules are characterised by FTIR, HRXRD, nitrogen adsorption–desorption isotherms, FESEM, and HRTEM. The adsorption capacities of Si-MCM-41 for the dyes followed a decreasing order of NR > SF > CR > RR2. The adsorption kinetics, isotherm and thermodynamic parameters are investigated in detail for these dyes using calcined Si-MCM-41. The kinetics and isotherm data showed that both SF and NR adsorb more rapidly than CR and RR2, in accordance with pseudo-second-order kinetics model as well as intraparticle diffusion kinetics model and Langmuir adsorption isotherm model respectively. The thermodynamic data suggest that the dye uptake process is spontaneous. The high adsorption capacities of dyes on Si-MCM-41 (q_m = 275.5 mg g^?1 for SF, q_m = 288.2 mg g^?1 for NR) is explained on the basis of electrostatic interactions as well as H-bonding interactions between adsorbent and adsorbate molecules. Good regeneration capacity is another important aspect of the material that makes it potent for the uptake of dyes from aqueous solution.     

Removal of diazo and triphenylmethane dyes from aqueous solutions through an adsorption process

Direct Red 31, Acid Black 1 and Acid Green 16 belonging to diazo and triphenylmethane classification of dye chemicals are widely used during the manufacture of leather. The spent dyestuffs in wastewater escape biological treatment owing to their poor biodegradability. An adsorption procedure was used in this study for the removal of dyes from aqueous solution using Rice Bran‐based Activated Carbon (RBAC). The molecular weight of the dye chemicals, the mass of RBAC and the diameter of RBAC particle had positive effects on the rate of adsorption. Initial concentration of dye chemicals, pH of the dye solution and temperature of adsorption showed a negative impact on adsorption. The enthalpies of adsorption for Direct Red 31, Acid Black 1 and Acid Green 16 were −32.1,−23.4 and −21.7 KJ mol⁻¹ respectively, indicating the adsorption was an exothermic physical process. The entropies of adsorption for Direct Red 31, Acid Black 1 and Acid Green 16 were −96.94,−59.92 and −26.96 J K⁻¹ mol ⁻¹ respectively, suggesting that RBAC favours the adsorption process. © 1999 Society of Chemical Industry     

Preparation and Utilization of Cationized Sawdust

Glycidyl trimethyl ammonium acetate (GTMAA) was prepared. Factors affecting the cationization of sawdust with GTMAA in presence of sodium hydroxide were investigated. These factors include sodium hydroxide/GTMAA molar ratio, liquor ratio, reaction duration, and temperature. The extent of cationization was traced by estimating the nitrogen content of the cationized sawdust, and its structural features were confirmed by IR analysis. The ability of cationized sawdust to adsorb anionic dyes, viz., Acid Fast Red 1, Acid Green 16, and Direct Blue 75, was investigated at 30°C. The adsorption data follow both Langmuir and Freundlish isotherms. The adsorption capacity, Q_max, were 82, 86.2, and 81.3 mg/g, for Acid Red 1, Direct Blue 75, and Acid Green 16, respectively. Cationized sawdust exhibited a much better adsorption capacity towards anionic dyes than native sawdust.     

[Dye molecules/copper(II)/macroporous glutaraldehyde‐chitosan] microspheres complex: Surface characterization,kinetic, and thermodynamic investigations

Chitosan microspheres loaded Cu(II) were prepared using a precipitation method and heterogeneously crosslinked with glutaraldehyde. The abilities of the binary [Cu(II)/Glut‐chitosan] system for binding two acid dyes, that is, Acid blue 25 (AB25) and Calmagite (Calma) were investigated. Sorption experiments were performed using a batch process at 25°C and indicate pH dependence. Evidence for the modification of the raw chitosan polymer was provided by Fourier transform infra red spectral study, thermogravimetry, differential thermogravimetry, differential scanning calorimetry, and scanning electron microscopy analysis. Data gleaned from the thermal analyses, showed that the modification of the polymer decreases the thermal stability of the prepared materials with respect to that of the native one. The effecting factors during dye adsorption have been also studied. Thermodynamic and kinetic experiments were undertaken to assess the capacity and the rate of dyes removal on the surface of [Cu(II)/Glut‐chitosan]. Experimental data were mathematically described using various kinetic models. The pseudo second‐order equation was shown to fit the adsorption kinetics. The interpretation of the equilibrium sorption data complies well with the Freundlich adsorption model. Thermodynamic results indicate that the adsorption follows an exothermic process. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The adsorptive properties of UiO-66 towards organic dyes: A record adsorption capacity for the anionic dye Alizarin Red S.

In order to decisively determine the adsorption selectivity of zirconium MOF(UiO-66) towards anionic versus cationic species, the adsorptive removal of the anionic dyes(Alizarin Red S.(ARS), Eosin(E), Fuchsin Acid(FA)and Methyl Orange(MO)) and the cationic dyes(Neutral Red(NR), Fuchsin Basic(FB), Methylene Blue(MB),and Safranine T(ST)) has been evaluated. The results clearly reveal a significant selectivity towards anionic dyes. Such an observation agrees with a plethora of reports of UiO-66 superior affinity towards other anionic species(Floride, PO_4~(3-), Diclofenac sodium, Methylchlorophenoxy-propionic acid, Phenols, CrO_4~(2-), SeO_3~(2-), and AsO_4~-). The adsorption process of ARS as an example has been optimized using the central composite design(CCD). The resultant statistical model indicates a crucial effect of both pH and sorbent mass. The optimum conditions were determined to be initial dye concentration 11.82 mg.L~(-1), adsorbent amount 0.0248 g, shaking time of 36 min and pH 2. The adsorption process proceeds via pseudo-second order kinetics(R~2= 0.999). The equilibrium data were fit to Langmuir and Tempkin models(R~2= 0.999 and 0.997 respectively). The results reveal an exceptional removal for the anionic dye(Alizarin Red S.) with a record adsorption capacity of400 mg·g~(-1). The significantly high adsorption capacity of UiO-66 towards ARS adds further evidence to the recently reported exceptional performance of MOFs in pollutants removal from water.     

Synthesis of urethane sodium carboxylate and its dye removal ability from single system

Urethane sodium carboxylate (USC) was synthesized and its dye removal ability was investigated. USC characteristics were studied using FTIR and SEM. Basic Blue 41 (BB41), Basic Red 18 (BR18), and Basic Violet 16 (BV16) were used. The effect of adsorbent dosage, dye concentration and salt on dye removal was evaluated. Adsorption kinetics followed pseudo-second order. The USC adsorption capacity was 474, 538 and 298 mg/g for BB41, BR18 and BV16, respectively. Adsorption isotherm followed with Langmuir isotherm. The results showed that the USC might be a suitable adsorbent to remove dyes from colored wastewater.