Theory of RF SQUIDs Operating in the Presence of Large Thermal Fluctuations

A comprehensive analytical theory is presented for non-hysteretic RF SQUIDs operating in the adiabatic mode in the presence of large thermal fluctuations. When 1 ( = 2LI_c/₀ is the hysteresis parameter, L is the SQUID inductance, I_c is the critical current of the Josephson junction, and ₀ is the flux quantum) the theory is applicable also for RF SQUIDs operating in the non-adiabatic mode. In contrast to previous theories in which the noise is treated perturbatively and which therefore are applicable only if the product 1 ( = 2k_BT/ ₀ I_c is the noise parameter, k_B is the Boltzmann constant, and T is the absolute temperature)—the case of small thermal fluctuations—the present theory is valid for around unity or higher. In the limit 0 the theory reproduces the results of small thermal fluctuations theories. It has been found that in the presence of large thermal fluctuations the screening current in the SQUID inductance is suppressed by a factor that increases with increasing . Taking into account this new basic fact, all SQUID characteristics (output signal, transfer function, noise spectral density and energy sensitivity) have been recalculated and a good agreement with experimental data has been obtained. It has been also found that RF SQUIDs can be operated with substantially higher values of the inductance and of the noise parameter than DC SQUIDs. These two aspects, which are of particular importance at liquid nitrogen temperature, make high T_c RF SQUIDs very attractive.     

A note on the similarity solutions for free convection on a vertical plate

Summary The similarity solutions for free convection on a vertical plate when the (non-dimensional) plate temperature is x and when the (non-dimensional) surface heat flux is –x are considered. Solutions valid for 1 and 1 are obtained. Further, for the first problem it is shown that there is a value ₀, dependent on the Prandtl number, such that solutions of the similarity equations are possible only for >₀, and for the second problem that solutions are possible only for >–1 (for all Prandtl numbers). In both cases the solutions becomes singular as ₀ and as –1, and the natures of these singularities are discussed.     

γ ? α2 Phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%)

The ₂ phase transformation in fractured high temperature stress rupture Ti-48Al-2Nb(at.%) alloy has been studied by analytical electron microscopy. ₂ and phases were found at grain boundaries. ₂ layers that suspended in layers and interfacial ledge higher than 2d ₍₁₁₁₎ at /₂ interfaces were observed in the lamellar grains. These facts indicated that ₂ phase transformation and dynamic recrystallization have occurred during high temperature stress rupture deformation. It can be concluded that deformation induced ₂ phase transformation and dynamic recrystallization resulted in the presence of particles at grain boundaries. A structural and compositional transition area between deformation-induced ₂(or ) and its adjacently original (or ₂) phases was found by HREM and EDS and is suggested as a way to transform between and ₂ phase during high temperature stress rupture deformation. The transition area was formed by slide of partial dislocations on close-packed planes and diffusion of atoms.     

Flow visualization glass-ceramic: Preliminary experimental and modelling results

A glass-ceramic material was developed to act as a flow visualization material. Preliminary experiments indicate that aperiodic, thermally induced, convective flows can be sustained at normal processing conditions. These flows and the stress and temperature gradients induced are most likely responsible for the anomalous behaviour seen in these materials and the difficulties encountered in their development and in their production on industrial and experimental scales. A simple model describing the dynamics of variable-viscosity fluids was developed and was shown to be in qualitative agreement with more sophisticated models as well as with experimental results. The model was shown to simulate the dependence of the critical Rayleigh number for the onset of convection on the viscous properties of the fluid at low T, and also to simulate quenching behaviour when the temperature differences were high.Nomenclature C _p Heat capacity - D, E, F Expansion coefficients - H Height of the roll cell - Pr Prandtl number - R _a Rayleigh number - R _c Critical Rayleigh number for the onset of convection in a constant-viscosity fluid - S Dimensionless stream function - T Temperature - T _m Mean temperature - T ₀ Bottom surface temperature - T _r Reference temperature - a Aspect ratio of cell - g Acceleration due to gravity - k Thermal conductivity - k ₁ Function related to ²v/T ² - k ₂ Function related to ⁴v/T ⁴ - r Rayleigh number ratioR _a/R _c - t Time - w Dimensionless vertical coordinate - w _m Mean cell height - x Horizontal coordinate - y Dimensionless horizontal coordinate - z Vertical coordinate - , Constants - _t Thermal expansion coefficient - Constant in viscosity function - T Temperature difference between top and bottom surfaces - _i Viscosity coefficients - Kinematic viscosity - _m Mean kinematic viscosity - Dimensionless kinematic viscosity - Thermal diffusivity - Non-linear temperature function - Dimensionless non-linear temperature function - _o - Stream function - Dimensionless time - Eigenvalues     

Nonlinear asymptotic theory of hypersonic flow past a circular cone

Summary The hypersonic small-disturbance theory is reexamined in this study. A systematic and rigorous approach is proposed to obtain the nonlinear asymptotic equation from the Taylor-Maccoll equation for hypersonic flow past a circular cone. Using this approach, consideration is made of a general asymptotic expansion of the unified supersonic-hypersonic similarity parameter together with the stretched coordinate. Moreover, the successive approximate solutions of the nonlinear hypersonic smalldisturbance equation are solved by iteration. Both of these approximations provide a closed-form solution, which is suitable for the analysis of various related flow problems. Besides the velocity components, the shock location and other thermodynamic properties are presented. Comparisons are also made of the zeroth-order with first-order approximations for shock location and pressure coefficient on the cone surface, respectively. The latter (including the nonlinear effects) demonstrates better correlation with exact solution than the zeroth-order approximation. This approach offers further insight into the fundamental features of hypersonic small-disturbance theory.Notation a speed of sound - H unified supersonic-hypersonic similarity parameter, - K hypersonic similarity parameter, M - M freestream Mach number - P pressure - T temperature - S entropy - u, v radial, polar velocities - V freestream velocity - shock angle - cone angle - density - density ratio, /() - ratio of specific heats - polar angle - stretched polar angle, / - (), (), () gage functions     

Microstructure and mechanical properties of rapidly quenched L20 and L20+L12 alloys in Ni-Al-Fe and Ni-Al-Co systems

Ductile L2₀-type wires and+L1₂-type duplex wires with high strengths and large elongation in the Ni-Al-Fe and Ni-Al-Co ternary systems have been manufactured directly from the liquid state by an in-rotating-water spinning method. The wire diameter was in the range 80 to 180m and the average grain size was 2 to 4m for the wires and 0.2 to 1.0m for the+ wires. _y, _f and _p of the wires were found to be about 360 to 760 MPa, 560 to 960 MPa, and 0.2 to 5.5%, respectively, for the Ni-Al-Fe system, those of the+ wires were about 395 to 660 MPa, 670 to 1285 MPa, and 3.5 to 17%, respectively, for the Ni-Al-Fe system, and about 260 to 365 MPa, 600 to 870 MPa, and 4.0 to 7.0%, respectively, for the Ni-Al-Co system. Cold-drawing caused a significant increase in _y and _f and the values attained were about 1850 and 2500 MPa, respectively, for Ni-20Al-30Fe and Ni-25Al-30Co wires drawn to about 90% reduction in area. The high strengths, large elongation and good cold-workability of the melt-quenched and+ compound wires have been inferred to be due to the structural change into a low-degree ordered state containing a high density of phase boundaries, suppression of grain-boundary segregation and refinement of grain size.     

Investigation of the excitonic insulator phase in bismuth-antimony alloys

Pressure-induced metal-semiconductor transitions in bismuth-antimony alloys in a strong magnetic field (up to 70 kOe) at helium temperatures have been investigated. It is found that for values of the overlap-gap |G|1 meV the alloy forms an excitonic insulator (EI) in magnetic fields above a certain threshold (30–40 kOe). It is inferred that the EI energy gap increases with the magnetic field. The maximum gap observed in fields of 70 kOe turns out to be ₀₀7.5 K. An analysis of the results shows that transitions to the EI phase are observed from both the semimetal and the semiconducting states. The critical transition temperatureT _c is related to the EI gap by the expressionT _c0.7. Arguments are advanced in support of the fact that the formation of the EI phase involves the pairing of electrons at theL point with holes at theT point.     

Simultaneous determination of the thermal conductivity and diffusivity of metals using an electronic heater

A nonstationary method allowing simultaneous determination of the thermal conductivity and diffusivity of metals using an electronic heater is described.Notation q_e heat flux density - t temperature - x distance to thermocouple - heating time - t₀ temperature at time zero - thermal conductivity of material examined - a thermal diffusivity of material - c coefficient describing the energy losses - X₁, x₂, x₃ distance to first, second, and third thermocouples, respectively - ₁, ₂, ₃ times during which specimen is heated to temperature t at points X₁, x₂, X₃, respectively     

Heat transfer in plane film formation

A mathematical model is obtained for the process of cooling with formation of a planar film. The solution obtained is verified experimentally.Notation mean axial velocity gradient - v_x current axial velocity - v_o initial polymer velocity - v₁ sampling velocity - K draw ratio - deformation rate tensor - x, y, z spatial coordinates - X, Y dimensionless coordinates - L() differential operator - T temperature - T_o initial temperature - T_c temperature of surrounding medium - dimensionless temperature - dimensionless temperature averaged over film thickness - thermal-diffusivity coefficient - 2_o initial film thickness - thermal conductivity - heat-transfer coefficient - f(X) distance function - Bi Biot criterion, Bi_o, Biot criterion calculated for initial film thickness - Gz* modified Graetz criterion - V dimensionless velocity - ₁, ₂, ₃ heat-transfer coefficients produced by radiation, free convection, and forced convection - v_c, _c mean velocity and film half-thickness in formation zone - T₁ calculated temperature value - T₂ experimental temperature value - l formation zone length Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 854–858, November, 1979.     

Magnetic field dependence of zero-sound attenuation close to the pair-breaking edge in3He-B due toJ=1−,J z =±1 collective modes

Our previous theory yielded for the Zeeman splitting of the imaginaryJ=1 collective mode in³He-B the result =2+0.25J _z ( is the effective Larmor frequency). In this paper we take into account the downward shift of the pair-breaking edge from 2 to 2₂– (₂ and ₁ are the longitudinal and transverse gap parameters). This leads to a complex Landé factor: the frequencies of theJ _z =±1 components become =2+0.39J _z , and the linewidths of these resonances become finite: =0.18. The coupling amplitudes of theJ _z =±1 components to density are found to be proportional to gap distortion, (₁–₂/(/)². Our results for the ultrasonic attenuation due to theJ _z =±1,J=1 modes are capable of explaining the field dependence of the attenuation close to the pair-breaking edge as observed by Dobbs, Saunders, et al. The observed peak is caused by theJ _z =–1 component: its height increases due to gap distortion as the field is increased, and the peak shifts downward in temperature and its width increases with the field due to the complex Landé factor. TheJ _z =+1 component gives rise to a corresponding dip relative to the continuum attenuation.     

The microstructure of sintered Si-Al-O-N ceramics

Fine-grained ceramics, based on the substituted -Si₃N₄ crystal structure, have been prepared with near theoretical densities by pressureless sintering of compacts containing a large Y₂O₃ additive concentration. The microstructure contains two phases, and an Y/Al rich silicate glassy matrix, in the as-sintered condition. The matrix may be crystallized on heat treatment to a Si-substituted yttrium-aluminium garnet phase. The phase compositions and transformation mechanisms have been analysed by X-ray microanalysis, electron diffraction and imaging of thin sections.A preliminary survey of mechanical properties of these sintered ceramics shows that they are comparable with commercial hot-pressed silicon nitrides, particularly at high temperatures. The possibility of development of a range of ceramic alloys, dependent on their chemical environment and temperature of application, is discussed.     

Electronic and two-magnon light scattering in oxide superconducting crystals

From investigations of two-magnon Raman scattering (RS) under high pressures up to 430 kbar in Eu₂CuO₄ and YBa₂Cu₃O_6.2 crystals, it was shown that the dependence of the superexchange integralJ on the distance between Cu and O atoms in CuO₂ planesa is anomalously weak (Ja^–n, n=3±0.5). The large value ofJ indicates strong initial overlapping of Cu and O wave functions in high-T _c , materials. It was found that an increase in free carrier concentration results in a rapid increase of magnon damping and the disappearance of the two-magnon peak from RS spectra. A detailed study of electron Raman scattering has been carried out in superconducting and insulating YBa₂Cu₃O_6–x , single crystals. The spectral redistribution at frequencies<600 cm^–1 in different polarizations indicate that the superconducting gap is strongly anisotropic. In the normal (metallic) phase the behavior of the imaginary part of the response functionR() in the polarization (xx) corresponds to the model of a marginal Fermi liquid, and in the polarization (xx), this behavior is independent of the temperature. In insulating crystals,R() is independent of temperature toT200 K in both polarizations.     

Thermal diffusivity of inhomogeneous systems

The possibility of analyzing the nonsteady temperature fields of inhomogeneous systems using the quasi-homogeneous-body model is investigated.Notation t, t_I, t_i temperature of quasi-homogeneous body inhomogeneous system, and i-th component of system - a, , c thermal diffusivity and conductivity and volume specific heat of quasi-homogeneous body - a_{i i}, c_i same quantities for the i-th component - q heat flux - S, V system surface and volume - x, y coordinates - macrodimension of system - dimensionless temperature Fo=a/² - Bi=/ Fourier and Biot numbers - N number of plates - =h/ ratio of micro- and macrodimensions - _V, volumeaveraged and mean-square error of dimensionless-temperature determination - time - m_i i-th component concentration Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 126–133, July, 1980.     

Transport results from untwinned YBCO: Washboard frequency of the vortex lattice,and the quasiparticle mean free path

The washboard frequency of the moving vortex lattice in untwinned YBa₂ Cu₃ O_6.93 may be observed through mode-locking to an externally applied ac current of frequency _ext. The interference between and _ext results in jumps in the dc current-voltage characteristics when and _ext are harmonically related¹. The interference effect disappears in the vortex liquid state. The Hall conductivity _xy below T_c in YBCO contains contributions² from a positive quasiparticle (qp) term (H) and a negative vortex term (1/H). The qp term is surprisingly large well below T_c and implies a large gap anisotropy and a long qp mean free path (mfp). The thermal Hall effect³ _xy is closely related to the qp _xy; _xy is produced by asymmetric scattering of qp by pinned vortices. The qp mfp at H = 0, extracted from _xy and extended to low T by _xy, increases remarkably from 90 Å at T_c to more than 0.5m at 22 K.     

Application of a new iterative method for elastic-plastic stress analysis

A new iterative method for elastic-plastic stress analysis based on a new approximation of the constitutive equations is proposed and compared with standard methods on the accuracy and the computational time in a test problem. The proposed method appears to be better than the conventional methods on the accuracy and comparable with others on the computational time. Also the present method is applied to a crack problem and the results are compared with experimental ones. The agreement of both results are satisfactory.List of symbols u = (u ₁, u ₂) displacements u ^(H) = u ⁽ⁿ⁺¹⁾ - u ⁽ⁿ⁾ u _k ⁽ⁿ⁾ = u _(k ^{(n + 1)} - u ⁽ⁿ⁾ (n, k = 0, 1, 2, ...) - = ₁₁, ₂₂, ₁₂) stresses - = (₁₁, ₂₂, ₁₂) strains - = (₁₁, ₂₂, ₁₂) center of yield surface - D elastic coeffficient matrix, C = D ^–1 - von Mises yield function. The initial yielding is given by f() = _Y - f {f/} - ^* transposed f - H hardening parameter (assumed to be a positive constant for kinematic hardening problems) - time derivative of - [K] total elastic stiffness matrix - T traction vector - = [B] relation between nodal displacements and strains     

Microstructure-property studies in friction-stir welded, Thixomolded magnesium alloy AM60

Thixomolded magnesium alloy AM60 plates joined by friction-stir welding were observed to be as strong or stronger than the unwelded base material. The thixotropic microstructures of the as-molded plates consisted of either 3% or 18% primary solid fraction of -Mg globules (45 m average size) in a eutectic mixture consisting of -Mg grains (10 m) surrounded by Mg₁₇Al₁₂ intermetallic grains in the -Mg grain boundaries (having an average size of 1–2 m). This complex, composite microstructure became a homogeneous (Mg + 6% Al)), recrystallized, equiaxed grain (10–15 m) microstructure in the weld zone.     

On the analysis of tunneling data for A15 superconductors

We examine the applicability of the standard McMillan inversion of Eliashberg's equations for superconductors with a nonconstant electronic density of statesN(). We do this usign simple models forN() and a realistically shapedN() taken from recent band structure work for Nb₃Sn. It turns out that peak structure inN() near _F may lead to gross errors in the derived Eliashberg function ²F() when the energy dependence ofN() is omitted in the inversion procedure. For Nb₃Sn, this leads to a 40% overestimate of when ²F() is evaluated via the standard McMillan program.     

Microstructural development of a ZrO2 Naβ″-Al2O3 composite

Microstructural development in Na-Al₂O₃ containing 15 vol% ZrO₂ particles is described. Intergranular ZrO₂ particles inhibit abnormal grain growth of the Na-Al₂O₃. The growth of the Na-Al₂O₃ grains and the intergranular ZrO₂ followed a cubic time law. Direct particle coalescence consisting of encounter and spheroidizing processes was found to be the basic growth mechanism for the intergranular ZrO₂     

Normal-State Gap, Supercarrier Mass Anisotropy and Isotope Effects in La2?xSrxCuO4

Magnetization measurements have been performed on the oxygen-isotopeexchanged samples (¹⁶O and ¹⁸O) of the one-layer cuprate superconductorsLa_2–x Sr _x CuO₄ (0.06x0.20). We find that there is an oxygen-isotopeeffect on the effective supercarrier mass m**, which is huge for x=0.06,and reduced to a smaller value for x=0.15. We also find that there coexistsmall (bi)polarons and free carriers for x0.09, but only small (bi)polaronsare present for x0.09. The normal-state gap is related to the bipolaronbinding energy which is inversely proportional to x for 0.05x0.15. Theobserved isotope effects, supercarrier mass anisotropy, normal-state gap,and mid-infrared spectra for x0.09 can be quantitatively explained by the small(bi)polaron theory of superconductivity proposed by Alexandrov, Kabanov, andMott (AKM).     

Ortho-para conversion in hydrogen bubbles in copper

The low-temperature heat release in copper due to ortho-para conversion in hydrogen bubbles is investigated. Deviations from a model of free solid hydrogen are observed: a more intense heat release atT10 K and a rapid (10 h) heat release after cooling to 1.3 K. The experimental results can be explained by the assumption of autocatalytic conversion in the bulk and the catalytic influence of the bubble surface.