Identification of two binding domains, one for peptidoglycan and another for a secondary cell wall polymer, on the N-terminal part of the S-layer protein SbsB from Bacillus stearothermophilus PV72/p2

First studies on the structure-function relationship of the S-layer protein from B. stearothermophilus PV72/p2 revealed the coexistence of two binding domains on its N-terminal part, one for peptidoglycan and another for a secondary cell wall polymer (SCWP). The peptidoglycan binding domain is located between amino acids 1 to 138 of the mature S-layer protein comprising a typical S-layer homologous domain. The SCWP binding domain lies between amino acids 240 to 331 and possesses a high serine plus glycine content.     

Influence of the secondary cell wall polymer on the reassembly, recrystallization, and stability properties of the S-layer protein from Bacillus stearothermophilus PV72/p2

The high-molecular-weight secondary cell wall polymer (SCWP) from Bacillus stearothermophilus PV72/p2 is mainly composed of N-acetylglucosamine (GlcNAc) and N-acetylmannosamine (ManNAc) and is involved in anchoring the S-layer protein via its N-terminal region to the rigid cell wall layer. In addition to this binding function, the SCWP was found to inhibit the formation of self-assembly products during dialysis of the guanidine hydrochloride (GHCl)-extracted S-layer protein. The degree of assembly (DA; percent assembled from total S-layer protein) that could be achieved strongly depended on the amount of SCWP added to the GHCl-extracted S-layer protein and decreased from 90 to 10% when the concentration of the SCWP was increased from 10 to 120 microg/mg of S-layer protein. The SCWP kept the S-layer protein in the water-soluble state and favored its recrystallization on solid supports such as poly-L-lysine-coated electron microscopy grids. Derived from the orientation of the base vectors of the oblique S-layer lattice, the subunits had bound with their charge-neutral outer face, leaving the N-terminal region with the polymer binding domain exposed to the ambient environment. From cell wall fragments about half of the S-layer protein could be extracted with 1 M GlcNAc, indicating that the linkage type between the S-layer protein and the SCWP could be related to that of the lectin-polysaccharide type. Interestingly, GlcNAc had an effect on the in vitro self-assembly and recrystallization properties of the S-layer protein that was similar to that of the isolated SCWP. The SCWP generally enhanced the stability of the S-layer protein against endoproteinase Glu-C attack and specifically protected a potential cleavage site in position 138 of the mature S-layer protein.     

Serratia marcescens S-layer protein is secreted extracellularly via an ATP-binding cassette exporter, the Lip system

The Serratia marcescens Lip exporter belonging to the ATP-binding cassette (ABC) exporter is known to be involved in signal peptide-independent extracellular secretion of a lipase and a metalloprotease. Although the genes of secretory proteins and their ABC exporters are usually all reported to be linked in several gram-negative bacteria, neither the lipase nor the protease gene is located close to the Lip exporter genes, lipBCD. A gene (slaA) located upstream of the lipBCD genes was cloned, revealing that it encodes a polypeptide of 100 kDa and is partially similar to the Caulobacter crescentus paracrystalline cell surface layer (S-layer) protein. The Lip exporter-deficient mutants of S. marcescens failed to secrete the SlaA protein. Electron micrography demonstrated the cell surface layer of S. marcescens. The S-layer protein was secreted to the cultured media in Escherichia coli cells carrying the Lip exporter. Three ABC exporters, Prt, Has and Hly systems, could not allow the S-layer secretion, indicating that the S. marcescens S-layer protein is strictly recognized by the Lip system. This is the first report concerning secretion of an S-layer protein via its own secretion system.     

Cloning, sequencing, and expression of the gene encoding a large S-layer-associated endoxylanase from Thermoanaerobacterium sp. strain JW/SL-YS 485 in Escherichia coli

The gene (xynA) encoding a surface-exposed, S-layer-associated endoxylanase from Thermoanaerobacterium sp. strain JW/SL-YS 485 was cloned and expressed in Escherichia coli. A 3.8-kb fragment was amplified from chromosomal DNA by using primers directed against conserved sequences of endoxylanases isolated from other thermophilic bacteria. This PCR product was used as a probe in Southern hybridizations to identify a 4.6-kb EcoRI fragment containing the complete xynA gene. This fragment was cloned into E. coli, and recombinant clones expressed significant levels of xylanase activity. The purified recombinant protein had an estimated molecular mass (150 kDa), temperature maximum (80 degrees C), pH optimum (pH 6.3), and isoelectric point (pH 4.5) that were similar to those of the endoxylanase isolated from strain JW/SL-YS 485. The entire insert was sequenced and analysis revealed a 4,044-bp open reading frame encoding a protein containing 1,348 amino acid residues (estimated molecular mass of 148 kDa).xynA was preceded by a putative promoter at -35 (TTAAT) and -10 (TATATT) and a potential ribosome binding site (AGGGAG) and was expressed constitutively in E. coli. The deduced amino acid sequence showed 30 to 96% similarity to sequences of family F beta-glycanases. A putative 32-amino-acid signal peptide was identified, and the C-terminal end of the protein contained three repeating sequences 59, 64, and 57 amino acids) that showed 46 to 68% similarity to repeating sequences at the N-terminal end of S-layer and S-layer-associated proteins from other gram-positive bacteria. These repeats could permit an interaction of the enzyme with the S-layer and tether it to the cell surface.     

Evidence that the N-terminal part of the S-layer protein from Bacillus stearothermophilus PV72/p2 recognizes a secondary cell wall polymer

The S-layer of Bacillus stearothermophilus PV72/p2 shows oblique lattice symmetry and is composed of identical protein subunits with a molecular weight of 97,000. The isolated S-layer subunits could bind and recrystallize into the oblique lattice on native peptidoglycan-containing sacculi which consist of peptidoglycan of the A1gamma chemotype and a secondary cell wall polymer with an estimated molecular weight of 24,000. The secondary cell wall polymer could be completely extracted from peptidoglycan-containing sacculi with 48% HF, indicating the presence of phosphodiester linkages between the polymer chains and the peptidoglycan backbone. The cell wall polymer was composed mainly of GlcNAc and ManNAc in a molar ratio of 4:1, constituted about 20% of the peptidoglycan-containing sacculus dry weight, and was also detected in the fraction of the S-layer self-assembly products. Extraction experiments and recrystallization of the whole S-layer protein and proteolytic cleavage fragments confirmed that the secondary cell wall polymer is responsible for anchoring the S-layer subunits by the N-terminal part to the peptidoglycan-containing sacculi. In addition to this binding function, the cell wall polymer was found to influence the in vitro self-assembly of the guanidinium hydrochloride-extracted S-layer protein. Chemical modification studies further showed that the secondary cell wall polymer does not contribute significant free amino or carboxylate groups to the peptidoglycan-containing sacculi.     

Cloning of the gene encoding the Actinobacillus actinomycetemcomitans serotype b OmpA-like outer membrane protein

The gene encoding an outer membrane protein A (OmpA)-like, heat-modifiable Omp of Actinobacillus actinomycetemcomitans ATCC 43718 (strain Y4, serotype b) was cloned by a PCR cloning procedure. DNA sequence analysis revealed that the gene encodes a protein of 346 amino acid residues with a molecular mass of 36.9 kDa. The protein expressed by the cloned gene reacted with a monoclonal antibody to the previously described 29-kDa Omp (Omp29) of strain Y4. This monoclonal antibody reacted specifically with Omp29 of A. actinomycetemcomitans (serotype b), but not with any Omp of Escherichia coli, including OmpA. This protein exhibited characteristic heat modifiability on sodium dodecyl sulfate-polyacrylamide gels, showing an apparent molecular mass of 29 kDa when unheated and a mass of 34 kDa when heated. The N-terminal amino acid sequence of the protein expressed in E. coli perfectly matched those deduced from the purified Omp29 of strain Y4. The deduced amino acid sequence of the gene coding for Omp29 from serotype b matched completely (except for valine at position 321) that of a recently reported omp34 gene described for A. actinomycetemcomitans serotype c (NCTC 9710). Because of the conserved nature of the gene within these serotypes, we designated the gene described herein from serotype b as omp34.     

Identification and characterization of clustered genes for thermostable xylan-degrading enzymes, beta-xylosidase and xylanase, of Bacillus stearothermophilus 21

Bacillus stearothermophilus 21 is a gram-positive, facultative thermophilic aerobe that can utilize xylan as a sole source of carbon. We isolated this strain from soil, purified its extracellular xylanase and beta-xylosidase, and analyzed the two-step degradation of xylan by these enzymes (T. Nanmori, T. Watanabe, R. Shinke, A. Kohno, and Y. Kawamura, J. Bacteriol. 172:6669-6672, 1990). An Escherichia coli transformant carrying a 4.2-kbp chromosomal segment of this bacterium as a recombinant plasmid was isolated. It excreted active beta-xylosidase and xylanase into the culture medium. The plasmid was introduced into UV-sensitive E. coli CSR603, and its protein products were analyzed by the maxicell method. Proteins harboring beta-xylosidase and xylanase activities were identified, and their molecular masses were estimated by sodium dodecyl sulfate-polyarylamide gel electrophoresis to be 75 and 40 kDa, respectively. The values were identical to those of proteins prepared from cells of B. stearothermophilus 21. The genes for both enzymes were encoded in a 3.4-kbp PstI fragment derived from the 4.2-kbp chromosomal segment. The nucleotide sequence of the 4.2-kbp segment was accordingly determined. The beta-xylosidase gene (xylA) is located upstream of the xylanase gene (xynA) with a possible promoter and a Shine-Dalgarno sequence. The latter gene is preceded by two possible promoters and a Shine-Dalgarno sequence that are located within the 3'-terminal coding region of the former. The two genes thus appear to be, at least partly, expressed independently, which was experimentally confirmed in E. coli by deletion analysis.(ABSTRACT TRUNCATED AT 250 WORDS)     

Germ-line regulation of the Caenorhabditis elegans sex-determining gene tra-2

A gene encoding a maltogenic amylase of Bacillus stearothermophilus ET1 was cloned and expressed in Escherichia coli. DNA sequence analysis indicated that the gene could encode a 69,627-Da protein containing 590 amino acids. The predicted amino acid sequence of the enzyme shared 47-70% identity with the sequences of maltogenic amylase from Bacillus licheniformis, neopullulanase from B. stearothermophilus, and cyclodextrin hydrolase (CDase) 1-5 from an alkalophilic Bacillus 1-5 strain. In addition to starch, pullulan and cyclodextrin, B. stearothermophilus could hydrolyze isopanose, but not panose, to glucose and maltose. Maltogenic amylase hydrolyzed acarbose, a competitive inhibitor of amylases, to glucose and a trisaccharide. When acarbose was incubated with 10% glucose, isoacarbose, containing an alpha-1,6-glucosidic linkage was produced as an acceptor reaction product. B. stearothermophilus maltogenic amylase shared four highly similar regions of amino acids with several amylolytic enzymes. The beta-cyclodextrin-hydrolyzing activity of maltogenic amylase was enhanced to a level equivalent to the activity of CDase when its amino acid sequence between the third and the fourth conserved regions was made more hydrophobic by site-directed mutagenesis. Enhanced transglycosylation activity was observed in most of the mutants. This result suggested that the members of a subfamily of amylolytic enzymes, including maltogenic amylase and CDase, could share similar substrate specificities, enzymatic mechanisms and structure/function relationships.     

Enhancing regional perinatal care: a clinical traineeship for perinatal nurses in a predominantly rural area

The gene nprM encoding the calcium-dependent extracellular proteinase from Bacillus megaterium ATCC 14581 was cloned in the vector pBR322 and expressed in Escherichia coli HB101. The DNA sequence of the cloned 3.7 kb fragment revealed only one open reading frame consisting of 1686 bp with a coding capacity of 562 amino acid residues. A predicted Shine-Dalgarno (SD) sequence was observed 9 bp upstream from the presumptive translation start site (ATG). A possible promoter sequence (TAGACG for the -35 region and TATAAT for the -10 region) was found about 69 bp upstream of the ATG start site. The deduced amino acid sequence exhibited a 24 amino acid residue signal peptide and an additional polypeptide 'pro' sequence of 221 amino acids preceding the putative mature protein of 317 amino acid residues. Amino acid sequence comparison revealed 84.5% homology between the mature protein and that of a thermolabile neutral protease from B. cereus. It also shares 73% homology with the thermostable neutral proteases of B. thermoproteolyticus and B. stearothermophilus. The zinc-binding sites and the catalytic residues are completely conserved in all four proteases. NprM has a temperature optimum of 58 degrees C, a pH optimum of between 6.4 and 7.2, and is stimulated by calcium ions and inhibited by EDTA. These results indicate that the enzyme is a neutral (metallo-) protease.     

Thermostable farnesyl diphosphate synthase of Bacillus stearothermophilus: molecular cloning, sequence determination, overproduction, and purification

The structural gene for thermostable farnesyl diphosphate synthase from Bacillus stearothermophilus was cloned, sequenced, and overexpressed in Escherichia coli cells. A 1,260-nucleotide sequence of the cloned fragment was determined. This sequence specifies an open reading frame of 891 nucleotides for farnesyl diphosphate synthase. The deduced amino acid sequence shows a 42% similarity with that of E. coli FPP synthase [Fujisaki et al. (1990) J. Biochem. 108, 995-1000]. Comparison with prenyltransferases from a wide range of organisms, from bacteria to human, revealed the presence of seven highly conserved regions. In contrast to thermolabile prenyltransferases, which have four to six cysteine residues, the thermostable farnesyl diphosphate synthase carries only two cysteine residues. This enzyme is also unique in that some of the amino acids that are fully conserved in equivalents from other sources are replaced by functionally different amino acids. Construction of an overproducing strain provided a sufficient supply of this enzyme and it was purified to homogeneity. The purified recombinant enzyme is immunochemically identical with the native B. stearothermophilus enzyme, and it is not inactivated even after treatment at 65 degrees C for 70 min.     

Influence of two apo A4 polymorphisms at codons 347 and 360 on non-fasting plasma lipoprotein-lipids and apolipoproteins in Asian Indians

The spi gene of Streptococcus pneumoniae was cloned and its nucleotide sequence was determined. It encodes a protein of 204 amino acids that is homologous to bacterial signal peptidase I proteins. The S. pneumoniae protein contains all of the conserved amino acid sequence motifs previously identified in this enzyme from both prokaryotic and eukaryotic sources. Sequence comparisons revealed several additional motifs characteristic of the enzyme. The cloned S. pneumoniae gene complemented an Escherichia coli mutant defective in its leader peptidase gene. Expression of the spi gene in S. pneumoniae appeared to be essential for viability. The cloned gene was shown to produce a polypeptide of approximately 20 kDa. Overproduction of the S. pneumoniae spi gene in an E. coli expression system gave a native protein product, soluble in the presence of a non-ionic detergent, which should be amenable to structural determination.     

Cloning and characterization of archaeal type I signal peptidase from Methanococcus voltae

Archaeal protein trafficking is a poorly characterized process. While putative type I signal peptidase genes have been identified in sequenced genomes for many archaea, no biochemical data have been presented to confirm that the gene product possesses signal peptidase activity. In this study, the putative type I signal peptidase gene in Methanococcus voltae was cloned and overexpressed in Escherichia coli, the membranes of which were used as the enzyme source in an in vitro peptidase assay. A truncated, His-tagged form of the M. voltae S-layer protein was generated for use as the substrate to monitor the signal peptidase activity. With M. voltae membranes as the enzyme source, signal peptidase activity in vitro was optimal between 30 and 40 degrees C; it was dependent on a low concentration of KCl or NaCl but was effective over a broad concentration range up to 1 M. Processing of the M. voltae S-layer protein at the predicted cleavage site (confirmed by N-terminal sequencing) was demonstrated with the overexpressed archaeal gene product. Although E. coli signal peptidase was able to correctly process the signal peptide during overexpression of the M. voltae S-layer protein in vivo, the contribution of the E. coli signal peptidase to cleavage of the substrate in the in vitro assay was minimal since E. coli membranes alone did not show significant activity towards the S-layer substrate in in vitro assays. In addition, when the peptidase assays were performed in 1 M NaCl (a previously reported inhibitory condition for E. coli signal peptidase I), efficient processing of the substrate was observed only when the E. coli membranes contained overexpressed M. voltae signal peptidase. This is the first proof of expressed type I signal peptidase activity from a specific archaeal gene product.     

Cloning and sequencing of a gene encoding D-aminoacylase from Alcaligenes xylosoxydans subsp. xylosoxydans A-6 and expression of the gene in Escherichia coli

The gene encoding the D-aminoacylase of Alcaligenes xylosoxydans subsp. xylosoxydans A-6 (Alcaligenes A-6) was cloned and its complete nucleotide sequence was identified. The D-aminoacylase structural gene consists of 1452 nucleotides and encodes 484 amino acid residues. The molecular weight of D-aminoacylase was calculated to be 51,918. This value agreed well with the apparent molecular weight of 52,000 found for the purified enzyme from Alcaligenes A-6 by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE). The N-terminal amino acid sequence (NH2-SQSDSQPFDLLRAG-) predicted by the nucleotide sequence exactly matched those of the purified D-aminoacylase both from Alcaligenes A-6 and from cloned Escherichia coli (E. coli), with the exception of the removal of the N-terminal methionine processed after translation. The purified recombinant enzyme showed almost the same enzymatic properties as the native enzyme from Alcaligenes A-6. Alcaligenes A-6 D-aminoacylase showed 25-29% homology with L-aminoacylases from Bacillus stearothermophilus, porcine and humans.     

Cloning, subcellular localization and functional expression of human RNase HII

Recently we showed that the major mammalian RNase H, RNase HI, is evolutionarily related to prokaryotic RNase HII (Frank et al., FEBS-Lett. 421, 23-26, 1998), an enzyme described to be a minor activity in E. coli. As a consequence we addressed the question of whether a human RNase H exists, sharing homology with the main E. coli enzyme, RNase HI. Employing sequence analysis of expressed sequence tags, followed by specific PCR amplification of human cDNA, we cloned, sequenced and expressed a human open reading frame, coding for a 32 kDa protein. Purification of the recombinant His(6)-tagged protein from E. coli extracts using Ni(2+)-chelating chromatography and subsequent renaturation gel assay proved that it is an active RNase H. The properties of this enzyme suggest that it is identical with the human RNase HII, previously purified by one of us (Frank et al., Nucleic Acids Res. 22, 5247-5254, 1994). Studies using a green fluorescent protein-fusion construct reveal that this protein is located in the nucleus.     

A novel glycerol kinase from Flavobacterium meningosepticum: characterization, gene cloning and primary structure

A thermostable glycerol kinase (FGK) was purified 34-fold to homogeneity from Flavobacterium meningosepticum. The molecular masses of the enzyme were 200 kDa by gel filtration and 50 kDa by SDS-PAGE. The Km for glycerol and ATP were 0.088 and 0.030 mM, respectively. The enzyme was stable at 65 degrees C for 10 min and at 37 degrees C for two weeks. The enzyme gene was cloned into Escherichia coli and its complete DNA was sequenced. The FGK gene consists of an open reading frame of 1494-bp encoding a protein of 498 amino acids. The deduced amino acid sequence of the gene had 40-60% similarity to those of glycerol kinases from other origins and the amino acid sequence of the putative active site residue reported for E. coli GK is identical to the corresponding sequence of FGK except for one amino acid residue.     

Improved mealtime treatment of diabetes mellitus using an insulin analogue. Multicenter Insulin Lispro Study Group

The gene coding for the major core protein (p26) of the lentivirus equine infectious anemia virus (EIAV) was cloned from EIAV infected serum, expressed in E. coli, and the resultant protein purified to electrophoretic homogeneity. The protein was expressed in a soluble form and was purified by conventional protein separation methods. When analyzed by SDS-PAGE, under both reducing and non-reducing conditions, the purified protein migrated as a 26 kDa monomer. Recombinant p26 (rp26), therefore, does not contain any intermolecular disulfide bond. Gel filtration chromatography also indicated that the protein occurs as a monomer in solution. Labeling of free sulphydryl groups with [1-14C]iodoacetamide suggests that none of the three cysteine residues of rp26 is involved in intramolecular disulfide bonds. The circular dichroism spectrum of rp26 was consistent with the following assignment of secondary structure elements: 51% a-helix, 15% beta-turn, and 34% aperiodic. Fluorescencespectroscopy revealed that the three tryptophan residues in rp26 occupy two different environments. These data support the conclusion that the recombinant protein is folded into an ordered and probably native conformation. Immunoblotting and enzyme immunoassay with EIAV infected sera demonstrated that recombinant p26 protein may be useful for diagnostic purposes.     

The signal recognition particle receptor alpha subunit of the hyperthermophilic archaeon Acidianus ambivalens exhibits an intrinsic GTP-hydrolyzing activity

Two adjacent genes of the acidophilic and hyperthermophilic crenarchaeon Acidianus ambivalens were cloned and sequenced. The 1.6 kb genomic nucleotide sequence under investigation consists of the 1.12 kb SRa gene encoding the putative signal recognition particle receptor alpha subunit (SR alpha, 42.2 kDa) and the 186 basepair secE gene coding for the putative secretory component secE subunit (6800 Da). The SR alpha protein is structured by three distinct regions: the N-terminal hydrophilic H-region, the following X-region and the C-terminal GTP-binding domain. A polyclonal anti-E. coli lacZ/A. ambivalens SR alpha antiserum detects a 51 kDa cell protein (p51) on immunoblots. Proteolysis of the recombinant SR alpha protein by Proteinase K produces a 31.6 kDa protease-resistant protein fragment comprising X-region and G-domain. The protein binds tightly to the GTP-agarose affinity matrix in a temperature-dependent manner. It hydrolyzes GTP readily at higher temperatures only in the presence of Mg2+. Point mutations (T326N) and (D329A) in the G-4 element of A. ambivalens SR alpha G-domain diminish the GTPase activity significantly. In contrast, the deletion mutant protein SR alpha (delta1-92) lacking the hydrophilic H-region displays a higher GTP-hydrolyzing activity when compared to the unmodified recombinant protein. Addition of GDP greatly inhibits GTP hydrolysis in mutant and unmodified A. ambivalens SR alpha.     

The reductase domain of the human inducible nitric oxide synthase is fully active in the absence of bound calmodulin

Adenosine kinase (adk) from the moss Physcomitrella patens (Hedw.) B.S.G. was cloned from a cDNA library by functional complementation of an Escherichia coli purine auxotrophic strain. The length of the entire cDNA clone was 1175 bp with an open reading frame coding for a protein with a predicted molecular weight of 37.3 kDa. Southern analysis indicated the presence of a single adenosine kinase gene within the Physcomitrella genome. The deduced amino acid sequence had a 52% identity with the human adenosine kinase. The transfer of phosphate from ATP to adenosine resulting in AMP, as well as the phosphorylation of the cytokinin, isopentenyladenosine, to isopentenyladenosine monophosphate, was shown by in vitro enzyme assays using crude extracts from E. coli mutants expressing the adk cDNA clone and from Physcomitrella chloronemal tissue. Results from in vivo feeding of chloronemal tissue with tritiated isopentenyladenosine suggest that adenosine kinase plays an important role in the conversion of cytokinins towards their nucleotides in Physcomitrella.