Tetrathiapentalene-based organic conductors

The synthesis, structure and properties of tetrathiapentalene-based (TTP) organic conductors are reviewed. Among various TTP-type donors, bis-fused tetrathiafulvalene, 2,5-bis(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalene (BDT-TTP) and its derivatives afford many metallic radical cation salts stable down to low temperatures, regardless of the size and shape of the counter anions. Most BDT-TTP conductors have a β-type donor arrangement with almost uniform stacks. Introduction of appropriate substituents results in molecular packing that differs from the β-type. A vinylogous TTP, 2-(1,3-dithiol-2-ylidene)-5-(2-ethanediylidene-1,3-dithiole)-1,3,4,6-tetrathiapentalene (DTEDT) has yielded an organic superconductor (DTEDT)₃Au(CN)₂ as well as metallic radical cation salts, regardless of the counter anions. (Thio)pyran analogs of TTP, namely (T)PDT-TTP and its derivatives produce molecular conductors with novel molecular arrangements. A TTP analog with reduced π-electron system 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) has afforded several organic superconductors. Highly conducting molecular metals with unusual oxidation states (+1, +5/3 and neutral) have been developed on the basis of 2,5-bis(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalene (BDT-TTP) derivatives and analogous metal derivatives M(dt)₂ (M = Ni, Au).     

Tetrathiapentalene-based organic conductors

Abstract

The synthesis, structure and properties of tetrathiapentalene-based (TTP) organic conductors are reviewed. Among various TTP-type donors, bis-fused tetrathiafulvalene, 2,5-bis(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalene (BDT-TTP) and its derivatives afford many metallic radical cation salts stable down to low temperatures, regardless of the size and shape of the counter anions. Most BDT-TTP conductors have a β-type donor arrangement with almost uniform stacks. Introduction of appropriate substituents results in molecular packing that differs from the β-type. A vinylogous TTP, 2-(1,3-dithiol-2-ylidene)-5-(2-ethanediylidene-1,3-dithiole)-1,3,4,6-tetrathiapentalene (DTEDT) has yielded an organic superconductor (DTEDT)₃Au(CN)₂ as well as metallic radical cation salts, regardless of the counter anions. (Thio)pyran analogs of TTP, namely (T)PDT-TTP and its derivatives produce molecular conductors with novel molecular arrangements. A TTP analog with reduced π-electron system 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) has afforded several organic superconductors. Highly conducting molecular metals with unusual oxidation states (+1, +5/3 and neutral) have been developed on the basis of 2,5-bis(1,3-dithiol-2-ylidene)-1,3,4,6-tetrathiapentalene (BDT-TTP) derivatives and analogous metal derivatives M(dt)₂ (M = Ni, Au).     

Triphenylene‐Derived Electron Acceptors and Donors on Ag(111): Formation of Intermolecular Charge‐Transfer Complexes with Common Unoccupied Molecular States

Over the past years, ultrathin films consisting of electron donating and accepting molecules have attracted increasing attention due to their potential usage in optoelectronic devices. Key parameters for understanding and tuning their performance are intermolecular and molecule–substrate interactions. Here, the formation of a monolayer thick blend of triphenylene‐based organic donor and acceptor molecules from 2,3,6,7,10,11‐hexamethoxytriphenylene (HAT) and 1,4,5,8,9,12‐hexaazatriphenylenehexacarbonitrile (HATCN), respectively, on a silver (111) surface is reported. Scanning tunneling microscopy and spectroscopy, valence and core level photoelectron spectroscopy, as well as low‐energy electron diffraction measurements are used, complemented by density functional theory calculations, to investigate both the electronic and structural properties of the homomolecular as well as the intermixed layers. The donor molecules are weakly interacting with the Ag(111) surface, while the acceptor molecules show a strong interaction with the substrate leading to charge transfer and substantial buckling of the top silver layer and of the adsorbates. Upon mixing acceptor and donor molecules, strong hybridization occurs between the two different molecules leading to the emergence of a common unoccupied molecular orbital located at both the donor and acceptor molecules. The donor acceptor blend studied here is, therefore, a compelling candidate for organic electronics based on self‐assembled charge‐transfer complexes.     

Synthesis,characterization, and photovoltaic properties of acceptor–donor–acceptor organic small molecules with different terminal electron-withdrawing groups

Two soluble acceptor–donor–acceptor (A–D–A) type organic small molecules, 2,2′-(5,5′-(1E,1′E)-2,2′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(ethene-2,1-diyl)bis(3,4-dihexylthiophene-5,2-diyl))bis(methan-1-yl-1-ylidene)dimalononitrile (BvT-DCN) and 2,2′-(3,3′-(1E,1′E)-2,2′-(5,5′-(1E,1′E)-2,2′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(ethene-2,1-diyl)bis(3,4-dihexylthiophene-5,2-diyl))bis(ethene-2,1-diyl)bis(5,5-dimethylcyclohex-2-ene-3-yl-1-ylidene))dimalononitrile (BT-C6), were synthesized by Knoevenagel condensation reaction based on benzothiadiazole, thiophene, and different terminal electron-withdrawing groups. The acceptor group benzothiadiazole and donor group thiophene inside the molecules are connected by all-trans double bonds, which ensures the benzothiadiazole and thiopene groups are in the same plane and makes the molecules have a relative narrow band gap and absorb sunlight in the long wavelength. The terminal electron-withdrawing groups, malononitrile and 2-(5,5-dimethylcyclohex-2-en-1-ylidene)malononitrile (DCM), are symmetrically introduced into the molecules, respectively, to tune the energy level and extend the absorption of the molecules. The UV–Vis absorption spectrum and cyclic voltammetry measurements indicated that BT-C6 has a lower energy band gap (1.60 eV) than BvT-DCN (1.71 eV), which arises from the stronger electron-withdrawing ability of DCM group in BT-C6 than that of malononitrile group in BvT-DCN. And BvT-DCN and BT-C6 have nearly the same highest occupied molecular orbital energy level, ?5.74 eV for BvT-DCN and ?5.72 eV for BT-C6 due to the same electron–donor group of the two compounds. Bulk heterojunction photovoltaic devices were fabricated using BvT-DCN or BT-C6 as donor and (6,6)-phenyl C₆₁-butyric acid methyl ester as acceptor. The device based on BT-C6 has a higher (~8 times) short circuit current and power conversion efficiency than the device based on BvT-DCN, resulting from the wider solar light absorption of BT-C6 and smaller phase separation dimension of the active layer based on BT-C6.     

The use of nanoimprint lithography to improve efficiencies of bilayer organic solar cells based on P3HT and a small molecule acceptor

Nanoimprint lithography (NIL) was carried out on bilayer organic photovoltaics (OPVs) based on regioregular poly(3-hexylthiophene-2,5-diyl) (P3HT) as electron donor and 4,7-bis(2-(1-ethylhexyl-4,5-dicyano-imidazol-2-yl)vinyl)benzo[c]1,2,5-thiadiazole (EV-BT) as electron acceptor. The power conversion efficiency of the devices after nanoimprinting increased from 0.20% to 0.30%, closer to that of the bulk heterojunction device at 0.37%. As a result, NIL proved to be a feasible method for improving the bilayer OPV performance by increasing the donor/acceptor interfacial area.     

Controlled phase separation for efficient energy conversion in dye/polymer blend bulk heterojunction photovoltaic cells

Low-cost photovoltaic energy conversion using conjugated polymers has achieved great improvement due to the invention of organic bulk heterojunction, in which the nanoscale phase separation of electron donor and acceptor favors realizing efficient charge separation and collection. We investigated the polymer photovoltaic cells using N, N′-bis(1-ethylpropyl)-3,4,9,10-perylene bis(tetracarboxyl diimide)/poly(3-hexyl thiophene) blend as an active layer. It is found that processing conditions for the blend films have major effects on its morphology and hence the energy conversion efficiency of the resulting devices. By optimizing the processing conditions, the sizes of donor/acceptor phase separation can be adjusted for realizing efficient charge separation and collection. The overall energy conversion efficiency of the photovoltaic cell processed with optimized conditions increases by nearly 40% compared to the normally spin-coated and annealed cell.     

Morphology Control Enables Efficient Ternary Organic Solar Cells

Ternary organic solar cells are promising alternatives to the binary counterpart due to their potential in achieving high performance. Although a growing number of ternary organic solar cells are recently reported, less effort is devoted to morphology control. Here, ternary organic solar cells are fabricated using a wide‐bandgap polymer PBT1‐C as the donor, a crystalline fused‐ring electron acceptor ITIC‐2Cl, and an amorphous fullerene derivative indene‐C₆₀ bisadduct (ICBA) as the acceptor. It is found that ICBA can disturb π–π interactions of the crystalline ITIC‐2Cl molecules in ternary blends and then help to form more uniform morphology. As a result, incorporation of 20% ICBA in the PBT1‐C:ITIC‐2Cl blend enables efficient charge dissociation, negligible bimolecular recombination, and balanced charge carrier mobilities. An impressive power conversion efficiency (PCE) of 13.4%, with a high fill factor (FF) of 76.8%, is eventually achieved, which represents one of the highest PCEs reported so far for organic solar cells. The results manifest that the adoption of amorphous fullerene acceptor is an effective approach to optimizing the ternary blend morphology and thereby increases the solar cell performance.     

Controlling molecular weight of naphthalenediimide-based polymer acceptor P(NDI2OD-T2) for high performance all-polymer solar cells

A widely-used naphthalenediimide(NDI) based electron acceptor P(NDI2OD-T2) with different numberaverage molecular weight(M_n) of 38(N2200_L), 56(N2200_M), 102(N2200_H) kD a were successfully prepared.The effect of molecular-weight on the performance of all-polymer solar cells based on Poly(5-(5-(4,8-bis(5-decylthiophen-2-yl)-6-methylbenzo[1,2-b:4,5-b']dithophen-2-yl)thiophen-2-yl)-6,7-difluoro-8-(5-methylthiophen-2-yl)-2,3-bis(3-(octyloxy)phenyl)quinoxaline)(P2F-DE):N2200 was systematically investigated. The results reveal that N2200 with increased Mn show enhanced intermolecular interactions, resulting in improved light absorption and electron mobility. However, the strong aggregation trend of N2200_H can cause unfavorable morphology for exciton dissociation and carrier transport. The blend film using N2200 with moderate Mn actually develops more ideal phase segregation for efficient charge separation and transport, leading to balanced electron/hole mobility and less carrier recombination. Consequently, all-polymer solar cells employing P2F-DE as the electron donor and N2200_M as the electron acceptor show the highest efficiency of 4.81%, outperforming those using N2200_L(3.07%)and N2200_H(3.92%). Thus, the Mn of the polymer acceptor plays an important role in all-polymer solar cells, which allows it to be an effective parameter for the adjustment of the device morphology and efficiency.     

Subtle Molecular Tailoring Induces Significant Morphology Optimization Enabling over 16% Efficiency Organic Solar Cells with Efficient Charge Generation

Manipulating charge generation in a broad spectral region has proved to be crucial for nonfullerene-electron-acceptor-based organic solar cells (OSCs). 16.64% high efficiency binary OSCs are achieved through the use of a novel electron acceptor AQx-2 with quinoxaline-containing fused core and PBDB-TF as donor. The significant increase in photovoltaic performance of AQx-2 based devices is obtained merely by a subtle tailoring in molecular structure of its analogue AQx-1. Combining the detailed morphology and transient absorption spectroscopy analyses, a good structure–morphology–property relationship is established. The stronger π–π interaction results in efficient electron hopping and balanced electron and hole mobilities attributed to good charge transport. Moreover, the reduced phase separation morphology of AQx-2-based bulk heterojunction blend boosts hole transfer and suppresses geminate recombination. Such success in molecule design and precise morphology optimization may lead to next-generation high-performance OSCs.     

Enhancing the Performance of Organic Solar Cells by Prolonging the Lifetime of Photogenerated Excitons

Exciton lifetime (τ) is crucial for the migration of excitons to donor/acceptor interfaces for subsequent charge separation in organic solar cells (OSCs); however, obvious prolongation of τ has rarely been achieved. Here, by introducing a solid additive 9-fluorenone-1-carboxylic acid (FCA) into the active layer, which comprises a nonfullerene acceptor, 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene (IT-M), τ is substantially prolonged from 491 to 928 ps, together with obvious increases in fluorescence intensity and quantum yield. Time-resolved transient infrared spectra indicate the presence of an intermolecular vibrational coupling between the electronic excited state of IT-M and the electronic ground state of FCA, which is first observed here and which can suppress the internal conversion process. IT-M-based OSCs display an improved short-circuit current and fill factor after the addition of FCA. Thus, the power conversion efficiency is increased, particularly for devices with a large donor/acceptor ratio of 1:4, whose efficiency is increased by 56%. This study describes a novel method, which is also applicable to other nonfullerene acceptors, for further improving the performance of OSCs without affecting their morphology and light absorption properties.     

Donor Polymer Can Assist Electron Transport in Bulk Heterojunction Blends with Small Energetic Offsets

Conventional organic solar cell (OSC) systems have significant energy offsets between the donor and acceptor both at the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels. Because of this, in a bulk heterojunction (BHJ) system, electrons typically transport in acceptors, whereas holes typically transport in donors. It is not favorable for electrons to hop back and forth between the donor and acceptor because the hopping is energetically disfavored. In such conventional OSC systems, the addition of donor polymer to acceptor films should typically reduce the electron mobility. In this study, a surprisingly large increase (up to 30×) in electron mobility is observed in an OSC blend when introducing a polymer donor into small molecular acceptor. By ruling out morphology reasons, it is shown that the donor polymer can assist the electron transport by providing “bridges” or a “shortcut” for electron transport across the domains of small molecular acceptors. This can happen because, for these systems, the LUMO offset is small. The study shows the benefits of donor‐assisted electron transport in BHJ systems with small energetic offsets. This finding could be also applied to other fields to tune the optimized charge transport property of organic materials or slush blends.     

Photovoltaic characterization of hybrid solar cells using surface modified TiO(2) nanoparticles and poly(3-hexyl)thiophene

We report on the photovoltaic performance of bulk heterojunction solar cells using novel nanoparticles of 6-palmitate ascorbic acid surface modified TiO(2) as an electron acceptor embedded into the donor poly(3-hexyl)thiophene (P3HT) matrix. Devices were fabricated by using P3HT with varying amounts of red TiO(2) nanoparticles (1:1, 1:2, 1:3?w-w ratio). The devices were characterized by measuring current-voltage characteristics under simulated AM 1.5 conditions. Incident photon to current efficiency (IPCE) was spectrally resolved. The nanoscale morphology of such organic/inorganic hybrid blends was also investigated using atomic force microscopy (AFM).     

Design of a New Small‐Molecule Electron Acceptor Enables Efficient Polymer Solar Cells with High Fill Factor

Improving the fill factor (FF) is known as a challenging issue in organic solar cells (OSCs). Herein, a strategy of extending the conjugated area of end‐group is proposed for the molecular design of acceptor–donor–acceptor (A–D–A)‐type small molecule acceptor (SMA), and an indaceno[1,2‐b:5,6‐b′]dithiophene‐based SMA, namely IDTN, by end‐capping with the naphthyl fused 2‐(3‐oxocyclopentylidene)malononitrile is synthesized. Benefiting from the π‐conjugation extension by fusing two phenyls, IDTN shows stronger molecular aggregation, more ordered packing structure, thus over one order of magnitude higher electron mobility relative to its counterpart. By utilizing the fluorinated polymer (PBDB‐TF) as the electron donor, the corresponding device exhibits a high efficiency of 12.2% with a record‐high FF of 0.78, which is approaching the theoretical limit of OSCs. Compared with the reference molecule, such a high FF in the IDTN system can be mainly attributed to the more ordered π–π packing of acceptor aggregates, higher domain purity and symmetric carrier transport in the blend. Hence, enlarging the conjugated area of the terminal‐group in these A–D–A‐type SMAs is a promising approach not only for enhancing the electron mobility, but also for improving the blend morphology, and both of them are conducive to the fill‐factor breakthrough.     

Morphological control of CuPc and its application in organic solar cells

We have prepared organic photovoltaic (OPV) cells possessing an ideal bulk heterojunction (BHJ) structure using the self-assembly of copper phthalocyanine (CuPc) as the donor material and fullerene (C(60)) as the acceptor. The variable self-assembly behavior of CuPc on a diverse range of substrates (surface energies) allowed us to control the morphology of the interface and the degree of carrier transportation within the active layer. We observed rod-like CuPc structures on indium-tin oxide (ITO), poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate) (PEDOT:PSS) and Au substrates. Accordingly, the interfaces and continuing transport path between CuPc and fullerene domains could be greatly improved due to the ideal BHJ structure. In this paper, we discuss the mechanisms of producing CuPc rod-like films on ITO, PEDOT:PSS and Au. The OPV cell performance was greatly enhanced when a mixture of horizontal and vertical CuPc rods was present on the PEDOT:PSS surfaces, i.e.?the power conversion efficiency was 50 times greater than that of the corresponding device featuring a planar CuPc structure.     

Composition and annealing effects in polythiophene/fullerene solar cells

We have fabricated organic solar cells with blends of regioregular poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C₆₁ (PCBM) as electron donor and electron acceptor, respectively. Blend composition and device annealing effects were investigated with optical absorption and photoluminescence spectroscopy, atomic force microscopy, photocurrent spectroscopy, and current-voltage characteristic measurements on devices under monochromatic or air mass (AM) 1.5 simulated solar light illumination. The highest efficiency was achieved for the 1:1 (P3HT:PCBM) weight ratio composition. The good performance is attributed to an optimized morphology that enables close intermolecular packing of P3HT chains. Inferior performance for the 1:2 composition is attributed to poorer intermolecular packing with increased PCBM content, while phase segregation on a sub-micron scale was observed for the 1:4 composition. The power conversion efficiency (AM 1.5) was doubled by the thermal annealing of devices at 140^∘C to reach a value of 1.4%.     

Immobilization of methylene blue on self-assembled iodine monolayers on gold

The immobilization of methylene blue (MB) on iodine-covered Au(111) is studied by electrochemical techniques, scanning tunneling microscopy (STM), Auger Electron Spectroscopy (AES), and Raman spectroscopy. Results show that MB species are efficiently adsorbed on the square root of 3 x square root of 3 R30 degrees I lattice on Au(111). The electrochemical behavior of the adsorbed MB molecules is reversible, indicating a relatively fast electron transfer from the Au(111) surface to the immobilized MB species through the iodine layer. STM images with molecular resolution are consistent with adsorption of MB dimers on a square root of 3 x square root of 3 R30 degrees I lattice placed atop of the Au(111) substrate. Results are compared to those obtained for MB immobilized on Au(111) covered by S(n) (n = 3-8) surface structures.     

Unique Energy Alignments of a Ternary Material System toward High‐Performance Organic Photovoltaics

Incorporating narrow‐bandgap near‐infrared absorbers as the third component in a donor/acceptor binary blend is a new strategy to improve the power conversion efficiency (PCE) of organic photovoltaics (OPV). However, there are two main restrictions: potential charge recombination in the narrow‐gap material and miscompatibility between each component. The optimized design is to employ a third component (structurally similar to the donor or acceptor) with a lowest unoccupied molecular orbital (LUMO) energy level similar to the acceptor and a highest occupied molecular orbital (HOMO) energy level similar to the donor. In this design, enhanced absorption of the active layer and enhanced charge transfer can be realized without breaking the optimized morphology of the active layer. Herein, in order to realize this design, two new narrow‐bandgap nonfullerene acceptors with suitable energy levels and chemical structures are designed, synthesized, and employed as the third component in the donor/acceptor binary blend, which boosts the PCE of OPV to 11.6%.     

Synthesis,characterization, and photovoltaic properties of a solution-processable two-dimensional-conjugated organic small molecule containing a triphenylamine core

A novel solution-processable two-dimensional-conjugated organic small molecule based on triphenylamine (TPA) core, (E)-2-(3-(4-(bis(4-(3-hexyl-5-(7-(4-hexylthiophen-2-yl)benzo[c] [1,2,5] thiadiazol-4-yl)thiophen-2-yl)phenyl)amino)styryl)-5,5-dimethylcyclohex-2-en-1-ylidene)malononitrile (TPA-TBT), has been designed and synthesized by Knoevenagel reaction. Different from the linear or star-shaped TPA derivatives, in TPA-TBT, two arms of the TPA core are symmetrically connected with the acceptor segment 4,7-di(2-thienyl)-2,1,3-benzothiadiazole (DTBT), but the third arm is connected with a strong acceptor group, 2-(5,5-dimethylcyclohex-2-en-1-ylidene)malononitrile (DCM), connected through a trans double bond with the TPA core. TPA-TBT has a relatively low optical band gap (1.91 eV) and a deep highest occupied molecular orbital (HOMO) energy level (?5.53 eV). Bulk heterojunction photovoltaic devices were fabricated using TPA-TBT as the donor and (6,6)-phenyl C₆₁-butyric acid methyl ester (PCBM) as the acceptor with the weight blend ratio of 2:1, 1:1, and 1:2. All the devices have a high open-circuit voltage (V _oc) of about 0.9 eV. Device with 1:1 blend ratio and LiF modification to the cathode exhibited a better performance with a short circuit current (J _sc) of 4.86 mA cm^?2 and a power conversion efficiency (PCE) of 1.13 %.     

Three-dimensional nano-networked P3MT/PCBM solar cells

The bulk heterojunction has been widely applied for the construction of efficient organic polymer solar cells. Typically, the heterojunction is formed as a result of the phase segregation of the donor and acceptor mixture. Here, we report a study in which, differently than the common annealing approach, efficient bulk heterojunction solar cells were fabricated using electrochemically grown 3-dimension (3D) poly-3-methyl-thiophene (P3MT) nano-networked structures. Porous and interconnected P3MT (donor) nano-structures were first electrochemically grown on a transparent Au electrode; then PCBM (acceptor) was infiltrated into the openings of the 3D P3MT nano-structure structure to form the bulk heterojunction. With this approach, efficient exciton dissociation can be realized, and importantly, excellent continuity of both donor and acceptor phases can be accomplished; and proper connection of each phase to the corresponding electrode is insured, therefore allowing effective collection of the free carriers. A power conversion efficiency (PCE) of 3.0% has been demonstrated.     

Flux dependent MeV self-ion-induced effects on Au nanostructures: dramatic mass transport and nanosilicide formation

We report a direct observation of dramatic mass transport due to 1.5?MeV Au(2+) ion impact on isolated Au nanostructures of average size ≈7.6?nm and height ≈6.9?nm that are deposited on Si(111) substrate under high flux (3.2 × 10(10)-6.3 × 10(12)?ions?cm(-2)?s(-1)) conditions. The mass transport from nanostructures was found to extend up to a distance of about 60?nm into the substrate, much beyond their size. This forward mass transport is compared with the recoil implantation profiles using SRIM simulation. The observed anomalies with theory and simulations are discussed. At a given energy, the incident flux plays a major role in mass transport and its redistribution. The mass transport is explained on the basis of thermal effects and the creation of rapid diffusion paths in the nanoscale regime during the course of ion irradiation. The unusual mass transport is found to be associated with the formation of gold silicide nano-alloys at subsurfaces. The complexity of the ion-nanostructure interaction process is discussed with a direct observation of melting (in the form of spherical fragments on the surface) phenomena. Transmission electron microscopy, scanning transmission electron microscopy, and Rutherford backscattering spectroscopy methods have been used.