Multiaxial notch fatigue life prediction based on pseudo stress correction and finite element analysis under variable amplitude loading

A new computational methodology is proposed for fatigue life prediction of notched components subjected to variable amplitude multiaxial loading. In the proposed methodology, an estimation method of non‐proportionality factor (F) proposed by authors in the case of constant amplitude multiaxial loading is extended and applied to variable amplitude multiaxial loading by using Wang‐Brown's reversal counting approach. The pseudo stress correction method integrated with linear elastic finite element analysis is utilized to calculate the local elastic‐plastic stress and strain responses at the notch root. For whole local strain history, the plane with weight‐averaged maximum shear strain range is defined as the critical plane in this study. Based on the defined critical plane, a multiaxial fatigue damage model combined with Miner's linear cumulative damage law is used to predict fatigue life. The experimentally obtained fatigue data for 7050‐T7451 aluminium alloy notched shaft specimens under constant and variable amplitude multiaxial loadings are used to verify the proposed methodology and equivalent strain‐based methodology. The results show that the proposed methodology is superior to equivalent strain‐based methodology.     

Low‐cycle fatigue life prediction of various metallic materials under multiaxial loading

This paper proposed a simple life prediction model for assessing fatigue lives of metallic materials subjected to multiaxial low‐cycle fatigue (LCF) loading. This proposed model consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane. Additional cyclic hardening developed during non‐proportional loading is included in the normal stress and strain terms. A computer‐based procedure for multiaxial fatigue life prediction incorporating critical plane damage parameters is presented as well. The accuracy and reliability of the proposed model are systematically checked by using about 300 test data through testing nine kinds of material under both zero and non‐zero mean stress multiaxial loading paths.     

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

A new calculation approach is suggested to the fatigue life evaluation of notched specimens under multiaxial variable amplitude loading. Within this suggested approach, if the computed uniaxial fatigue damage by the pure torsional loading path is larger than that by the axial tension–compression loading path, a shear strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage; otherwise, an axial strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage. Furthermore, the presented method employs shear strain‐based and axial strain‐based multiaxial fatigue damage parameters in substitution of equivalent strain amplitude to consider the influence of nonproportional additional hardening. The experimental data of GH4169 superalloy and 7050‐T7451 aluminium alloy notched components are used to illustrate the presented multiaxial fatigue lifetime estimation approach for notched components, and the results reveal that estimations are accurate.     

A notch critical plane approach of multiaxial fatigue life prediction for metallic notched specimens

An approach based on the local stress response is proposed to locate the fatigue critical point for metallic blunt notched specimens under multiaxial fatigue loading. According to the stress analysis, both stress gradient and gradient of loading nonproportionality exist at notch root. The plane in the vicinity of the notch that passes through the fatigue critical point and experiences the maximum shear stress amplitude is defined as the critical plane for notch specimens (CPN). Furthermore, the Susmel's fatigue damage parameter is modified to assess fatigue life of notched components by combining CPN and the theory of critical distance (TCD). The multiaxial fatigue test of the thin‐walled round tube specimens made of Ni‐base alloy GH4169 is carried out to verify the above approaches. In addition, test data of two kinds of materials are collected. The results show that the maximum absolute error of the fatigue critical point is 9.6° and the majority of the predicted life falls within the three‐time scatter band.     

Biaxial fatigue for proportional and non‐proportional loading paths

In order to study the use of a local approach to predict crack‐initiation life on notches in mechanical components under multiaxial fatigue conditions, the study of the local cyclic elasto‐plastic behaviour and the selection of an appropriate multiaxial fatigue model are essential steps in fatigue‐life prediction. The evolution of stress–strain fields from the initial state to the stabilized state depends on the material type, loading amplitude and loading paths. A series of biaxial tension–compression tests with static or cyclic torsion were carried out on a biaxial servo‐hydraulic testing machine. Specimens were made of an alloy steel 42CrMo4 quenched and tempered. The shear stress relaxations of the cyclic tension–compression with a steady torsion angle were observed for various loading levels. Finite element analyses were used to simulate the cyclic behaviour and good agreement was found. Based on the local stabilized cyclic elastic–plastic stress–strain responses, the strain‐based multiaxial fatigue damage parameters were applied and correlated with the experimentally obtained lives. As a comparison, a stress‐invariant‐based approach with the minimum circumscribed ellipse (MCE) approach for evaluating the effective shear stress amplitude was also applied for fatigue life prediction. The comparison showed that both the equivalent strain range and the stress‐invariant parameter with non‐proportional factors correlated well with the experimental results obtained in this study.     

Life prediction based on weight‐averaged maximum shear strain range plane under multiaxial variable amplitude loading

Based on Wang and Brown's reversal counting method, a new approach to the determination of the critical plane is proposed by the defined plane with a weight‐averaged maximum shear strain range under multiaxial variable amplitude loading. According to the determined critical plane, a detailed procedure of multiaxial fatigue life prediction is introduced to predict lives in the low‐cycle multiaxial fatigue regime. The proposed approach is verified by two multiaxial fatigue damage models and Miner's linear cumulative damage law. The results showed that the proposed approach can effectively predict the orientation of the failure plane under multiaxial variable amplitude loading and give a satisfactory life prediction.     

Proportional/nonproportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity,non‐zero mean stresses,and critical distance/plane

This paper deals with the formulation and experimental validation of a novel fatigue lifetime estimation technique suitable for assessing the extent of damage in notched metallic materials subjected to in‐service proportional/nonproportional constant/variable amplitude multiaxial load histories. The methodology being formulated makes use of the Modified Manson‐Coffin Curve Method, the Shear Strain–Maximum Variance Method, and the elasto‐plastic Theory of Critical Distances, with the latter theory being applied in the form of the Point Method. The accuracy and reliability of our novel fatigue lifetime estimation technique were checked against a large number of experimental results we generated by testing, under proportional/nonproportional constant/variable amplitude axial‐torsional loading, V‐notched cylindrical specimens made of unalloyed medium‐carbon steel En8 (080M40). Specific experimental trials were run to investigate also the effect of non‐zero mean stresses as well as of different frequencies between the axial and torsional stress/strain components. This systematic validation exercise allowed us to demonstrate that our novel multiaxial fatigue assessment methodology is remarkably accurate, with the estimates falling within an error factor of 2. By modelling the cyclic elasto‐plastic behaviour of metals explicitly, the design methodology being formulated and validated in the present paper offers a complete solution to the problem of estimating multiaxial fatigue lifetime of notched metallic materials, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history.     

Use of an energy‐based/critical plane model to assess fatigue life under low‐cycle multiaxial cycles

For engineering components subjected to multiaxial loading, fatigue life prediction is crucial for guaranteeing their structural security and economic feasibility. In this respect, energy‐based models, integrating the stress and strain components, are widely used because of their availability in fatigue prediction. Through employing the plastic strain energy concept and critical plane approach, a new energy‐based model is proposed in this paper to evaluate the low‐cycle fatigue life, in which the critical plane is defined as the maximum damage plane. In the proposed model, a newly defined NP factor κ^*  is used to quantify the nonproportional (NP) effect so that the damage parameter can be conveniently calculated. Moreover, a simple estimation method of weight coefficient is developed, which can reflect different contributions of shear and normal plastic strain energy on total fatigue damage. Experimental data of 10 kinds of materials are employed to assess the effectiveness of this model as well as three other energy‐based models.     

Prediction of fatigue lifetime under multiaxial cyclic loading using finite element analysis

Life prediction for GH4169 superalloy thin tubular and notched specimens were investigated under proportional and nonproportional loading with elastic–plastic finite element analysis (FEA). A strain-controlled tension–torsion loading was carried out by applying the axial and circular displacements on one end of the specimen in the cylindrical coordinate system. Uniaxial cyclic stress–strain data at high temperature were used to describe the multi-linear kinematic hardening of the material. The comparison between FEA and experimental results for thin tubular specimen showed that the built model of FE is reliable. A fatigue damage parameter was proposed to predict the fatigue crack initiation life for notched specimen. The results showed that a good agreement was achieved with experimental data.     

Multiaxial fatigue damage parameter and life prediction for medium-carbon steel based on the critical plane approach

The tension–torsion fatigue characteristics were investigated under proportional and non-proportional loading in this paper. The fatigue cracks on the surface of multiaxial fatigue specimens were observed and analyzed by a scan electron microscope. On the basis of the investigation on the Kindil–Brown–Miller and Fatemi–Socie’s critical plane approaches, a shear strain based multiaxial fatigue damage parameter was proposed by von Mises criterion based on combining the maximum shear strain and the normal strain excursion between adjacent turning points of the maximum shear strain on the critical plane. The proposed multiaxial fatigue damage parameter does not include the weight constants. According to the proposed multiaxial fatigue damage parameter, the multiaxial fatigue life prediction model was established with the Coffin–Manson equation, which is used to predict the multiaxial fatigue life of medium-carbon steel. The results showed that the proposed multiaxial fatigue damage parameter could be used under either multiaxial proportional or non-proportional loading.     

Multiaxial fatigue life prediction method based on path‐dependent cycle counting under tension/torsion random loading

A path‐dependent cycle counting method is proposed by applying the distance formula between two points on the tension‐shear equivalent strain plane for the identified half‐cycles first. The Shang–Wang multiaxial fatigue damage model for an identified half‐cycle and Miner's linear accumulation damage rule are used to calculate cumulative fatigue damage. Therefore, a multiaxial fatigue life prediction procedure is presented to predict conveniently fatigue life under a given tension and torsion random loading time history. The proposed method is evaluated by experimental data from tests on cylindrical thin‐walled tubes specimens of En15R steel subjected to combined tension/torsion random loading, and the prediction results of the proposed method are compared with those of the Wang–Brown method. The results showed that both methods provided satisfactory prediction.     

Prediction of multiaxial fatigue life for complex three‐dimensional stress state considering effect of additional hardening

In engineering practice, it is generally accepted that most of components are subjected to multiaxial stress‐strain state. To analyse this complicated loading state, different types of specimens of 2A12 (2124 in the United States) aluminium alloy were tested under multiaxial loading conditions and a new multiaxial fatigue analysis method for the state of three‐dimensional stress and strain is proposed. Elastic‐plastic finite element method (FEM) and a proposed vector computing method are used to describe the loading state at the critical point of specimen, by which the parameter Γ_T is calculated at the new defined subcritical plane to consider the effect of additional cyclic hardening. Meanwhile, the principal equivalent strain is still calculated at the traditional critical plane. The new damage parameter is composed of different process parameters, by which the dynamic path of strain state, including loading environments and material properties, are fully considered in one loading cycle. According to experimental verifications with 2A12 aluminium alloy, the results show that the proposed method shows satisfactory, accurate, and reliable results for multiaxial fatigue life prediction in the state of three‐dimensional stress and strain.     

A stress-based method to predict lifetime under multiaxial fatigue loadings

This paper extends to low/medium‐cycle fatigue a stress‐based method recently proposed by the same authors for high‐cycle multiaxial fatigue assessments. By considering the plane of maximum shear stress amplitude coincident with the microcrack initiation plane, the method requires the calculation both of the maximum shear stress amplitude and the maximum normal stress relative to the same plane. Multiaxial fatigue life estimates are made by means of bi‐parametric modified Wöhler curves, which take into account the mean stress effect, the influence of the out‐of‐phase angle and the presence of notches by using a generalization to multiaxial fatigue of the fatigue strength reduction factor K_f. Approximately 700 experimental data taken from the literature are used to demonstrate that the method is a useful tool to summarize fatigue strength data of both smooth and notched components, subjected to either in‐phase or out‐of‐phase loads. Finally, a simple practical rule for the calculation of the multiaxial fatigue strength reduction factor is proposed.     

Simulation of cyclic stress/strain evolutions for multiaxial fatigue life prediction

This study deals with simulation for cyclic stress/strain evolutions and redistributions, and evaluation of fatigue parameters suitable for estimating fatigue lives under multiaxial loadings. The local cyclic elastic–plastic stress–strain responses were analyzed using the incremental plasticity procedures of ABAQUS finite element code for both smooth and notched specimens made of three materials: a medium carbon steel in the normalized condition, an alloy steel quenched and tempered and a stainless steel, respectively. Emphasis is on the studying of ‘intelligent’ material behaviors to resist fracture, such as stress redistribution and relaxation through plastic deformations, etc. For experimental verifications, a series of tests of biaxial low cycle fatigue composed of tension/compression with static and cyclic torsion were carried out on a biaxial servo-hydraulic testing machine (Instron 8800). Different multiaxial loading paths were used to verify their effects on the additional cyclic hardening. The comparisons between numerical simulations and experimental observations show that the FEM simulations allow better understanding on the evolutions of the local cyclic stress–strain and it is shown that strong interactions exist between the most stressed material element and its neighboring material elements in the plastic deformations and stress redistributions. Based on the local cyclic elastic–plastic stress–strain responses, the energy-based multiaxial fatigue damage parameters are applied to correlating the experimentally obtained lives. Improved correlations between the predicted and the experimental results are shown. It is concluded that the improvement of fatigue life prediction depends not only on the fatigue damage models, but also on the accurate evaluations of the cyclic elasto-plastic stress/strain responses.     

Prediction methods of fatigue critical point for notched components under multiaxial fatigue loading

Two methods based on local stress responses are proposed to locate fatigue critical point of metallic notched components under non‐proportional loading. The points on the notch edge maintain a state of uniaxial stress even when the far‐field fatigue loading is multiaxial. The point bearing the maximum stress amplitude is recognized as fatigue critical point under the condition of non‐mean stress; otherwise, the Goodman's empirical formula is adopted to amend mean stress effect prior to the determination of fatigue critical point. Furthermore, the uniaxial stress state can be treated as a special multiaxial stress state. The Susmel's fatigue damage parameter is employed to evaluate the fatigue damage of these points on the notch edge. Multiaxial fatigue tests on thin‐walled round tube notched specimens made of GH4169 nickel‐base alloy and 2297 aluminium‐lithium alloy are carried out to verify the two methods. The prediction results show that both the stress amplitude method and the Susmel's parameter method can accurately locate the fatigue critical point of metallic notched components under multiaxial fatigue loading.     

Multiaxial fatigue of extruded ZK60 magnesium alloy

Multiaxial monotonic and cyclic behaviors of ZK60‐T5 magnesium extrusion are investigated. Strain‐controlled tests were performed at standard laboratory condition with fully reversed straining. Twinning‐detwinning deformation plays an important role in the cyclic axial behavior for tests that were performed under strain amplitudes higher than 0.4%. However, the hysteresis loop for the 0.4% was found symmetric and no sign of twinning‐detwinning deformation was observed. On the contrary, the cyclic shear behavior was found to be similar to conventional alloys and no significant asymmetric or twinning‐detwinning deformations were observed. The multiaxial fatigue tests suggest that multiaxiality and nonproportionality are not detrimental to fatigue life. Three multiaxial fatigue damage models were used: Smith‐Watson‐Topper, Fatemi‐Socie, and Jahed‐Varvani. While Fatemi‐Socie and Jahed‐Varvani models show comparable estimation, Smith‐Watson‐Topper overestimates shear and nonproportional lives.     

A simple energy‐based model for nonproportional low‐cycle multiaxial fatigue life prediction under constant‐amplitude loading

From the literature concerning the traditional nonproportional (NP) multiaxial cyclic fatigue prediction, special attentions are usually paid to multiaxial constitutive relations to quantify fatigue damage accumulation. As a result, estimation of NP hardening effect decided by the entire history path is always proposed, which is a challenging and complex task. To simplify the procedure of multiaxial fatigue life prediction of engineering components, in this paper, a novel effective energy parameter based on simple material properties is proposed. The parameter combines uniaxial cyclic plastic work and NP hardening effects. The fatigue life has been assessed based on traditional multiaxial fatigue criterion and the proposed parameter, which has been validated by experimental results of 316 L stainless steel under different low‐cycle loading paths.     

Deformation behaviour,short crack growth and fatigue livesunder multiaxial nonproportional loading

Experimental results of a research project on short crack growth under multiaxial nonproportional loading are presented. Fatigue lives, crack growth curves and the deformation behaviour of hollow tube specimens and notched specimens were investigated under combined tension and torsion loading. The results served as basis for the development of a cyclic plasticity model [Döring R, Hoffmeyer J, Vormwald M, Seeger T. A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading. In: Comput Mater Sci. 28(3–4);2003:587–96; Döring R, Hoffmeyer J, Seeger T, Vormwald M. Constitutive modelling of nonproportional hardening, cyclic hardening and ratchetting. In: Proceedings of the seventh international conference on biaxial/multiaxial fatigue and fracture, DVM, Berlin; 2004. p. 291–6; Hoffmeyer J. Anrisslebensdauervorhersage bei mehrachsiger Beanspruchung auf Basis des Kurzrisskonzepts. PhD-Thesis, TU Darmstadt; 2004.] and a short crack model [Hoffmeyer J. Anrisslebensdauervorhersage bei mehrachsiger Beanspruchung auf Basis des Kurzrisskonzepts. PhD-Thesis, TU Darmstadt; 2004; Döring R, Hoffmeyer J, Seeger T, Vormwald M. Fatigue lifetime prediction based on a short crack growth model for multiaxial nonproportional loading. In: Proceedings of the seventh international conference on biaxial and multiaxial fatigue and fracture, DVM, Berlin; 2004. p. 253–8].Stress–strain paths including nonproportional hardening and experimental fatigue lives of the unnotched specimens under different loading cases are discussed and compared with calculations. Load-time-sequences were in-phase, 45° and 90° out-of-phase loading with constant and variable amplitudes, torsion without and with superimposed static normal stress, and strain paths like box, butterfly, diamond and cross path. For the notched specimens fatigue lives under 0° and 90° out-of-phase loading are compared with calculations based on finite element results and the short crack model. During some tests the initiation, growth and orientation of short cracks was studied using the plastic replica technique.     

A multiaxial high-cycle fatigue life evaluation model for notched structural components

A model for multiaxial high-cycle fatigue life evaluation of notched structural components is proposed, which considers the impact of the stress field on fatigue life by utilizing the Theory of Critical Distances (TCD) and Finite Element Method (FEM). The maximum shear stress range plane is defined as the critical plane, and the damage parameters are the maximum effective shear stress amplitude and the maximum effective normal stress, which are obtained by averaging the stress in the hemisphere volume around the maximum stress point. To validate the accuracy of the model, multiaxial fatigue tests are carried out for both smooth and notched specimens of Aluminum–Silicon alloy. The results indicate that the evaluated life and experimental life have a good agreement.     

EVICD – eine Lebensdauermethode für komplexe mehrachsige Betriebsbelastungen für die Praxis

EVICD – an advanced crack intiation life prediction method for engineering application In the present paper an overview of the latest stand in the development of EVICD, a crack initiation life prediction method for arbitrary multiaxial loading, is given. The incremental prediction method which was originally proposed by W. Ott and which was later extended by the introduction of a secondary damage parameter either based on the normal stress on the planes with maximum shear stresses (EVICD‐N) or the normal stress on the octahedral planes (EVICD‐J1) has been further developed: A special Input Section was created, which is open to all important types and formats of engineering input data for fatigue calculations. The results of strain measurements can also be taken. Further on, the multiaxial Neuber‐Method has been worked in for a fast determination of the elastic plastic stresses and strains at fatigue critical locations of components. At the end of the Input Section the elastic plastic stress or strain path at the fatigue critical location is transferred to the damage evaluation modul of EVICD for an evaluation of the crack initiation life. The Mróz‐Garud plasticity model has been worked in the damage evaluation model. The fatigue damage evaluation does occur after a transparent flow diagram and has been realized as a FORTRAN Code. This is important for a general use of EVICD in practice. Meanwhile EVICD has been verified on a broader basis. A representation of the prediction results after EVICD vs. the corresponding experimental results after a proposal of E. Haibach shows, that the prediction capability of EVICD has become better than that of conventional fatigue prediction methods.