共查询到20条相似文献,搜索用时 15 毫秒
1.
Use of an energy‐based/critical plane model to assess fatigue life under low‐cycle multiaxial cycles
Lei Gan Hao Wu Zheng Zhong 《Fatigue & Fracture of Engineering Materials & Structures》2019,42(12):2694-2708
For engineering components subjected to multiaxial loading, fatigue life prediction is crucial for guaranteeing their structural security and economic feasibility. In this respect, energy‐based models, integrating the stress and strain components, are widely used because of their availability in fatigue prediction. Through employing the plastic strain energy concept and critical plane approach, a new energy‐based model is proposed in this paper to evaluate the low‐cycle fatigue life, in which the critical plane is defined as the maximum damage plane. In the proposed model, a newly defined NP factor κ* is used to quantify the nonproportional (NP) effect so that the damage parameter can be conveniently calculated. Moreover, a simple estimation method of weight coefficient is developed, which can reflect different contributions of shear and normal plastic strain energy on total fatigue damage. Experimental data of 10 kinds of materials are employed to assess the effectiveness of this model as well as three other energy‐based models. 相似文献
2.
CHENG‐CHENG ZHANG WEI‐XING YAO 《Fatigue & Fracture of Engineering Materials & Structures》2011,34(5):337-344
Several groups of fatigue damage parameters are discussed and then an improved multiaxial high‐cycle fatigue criterion based on critical plane defined by the plane of maximum shear stress range is presented in this paper. A compromising solution to consider the mean normal stress acting on the critical plane is also proposed. The new fatigue criterion extends the range of metallic materials which is valid for the ratio 1.25 < f?1/t?1 < 2. The predictions based on the presented model show a good agreement with test data. 相似文献
3.
H. CHEN D.‐G. SHANG E.‐T. LIU 《Fatigue & Fracture of Engineering Materials & Structures》2011,34(10):782-791
A path‐dependent cycle counting method is proposed by applying the distance formula between two points on the tension‐shear equivalent strain plane for the identified half‐cycles first. The Shang–Wang multiaxial fatigue damage model for an identified half‐cycle and Miner's linear accumulation damage rule are used to calculate cumulative fatigue damage. Therefore, a multiaxial fatigue life prediction procedure is presented to predict conveniently fatigue life under a given tension and torsion random loading time history. The proposed method is evaluated by experimental data from tests on cylindrical thin‐walled tubes specimens of En15R steel subjected to combined tension/torsion random loading, and the prediction results of the proposed method are compared with those of the Wang–Brown method. The results showed that both methods provided satisfactory prediction. 相似文献
4.
A hybrid frequency–time domain method for predicting multiaxial fatigue life of 7075‐T6 aluminium alloy under random loading
下载免费PDF全文
![点击此处可从《Fatigue & Fracture of Engineering Materials & Structures》网站下载免费的PDF全文](/ch/ext_images/free.gif)
J. Ge Y. Sun S. Zhou L. Zhang Y. Zhang Q. Zhang 《Fatigue & Fracture of Engineering Materials & Structures》2015,38(3):247-256
A hybrid frequency–time domain method for predicting multiaxial fatigue life under random loading is developed on the basis of combination of the frequency domain and time domain analysis. The critical damage point of the structure is determined by the frequency domain equivalent stress method. Then, the fatigue life prediction is made in time domain by generating random load‐time histories from the power spectral density of the critical point. The method is validated with the random vibration fatigue test of 7075‐T6 aluminium alloy. It has been shown that the results of fatigue life calculated by hybrid method are well correlated with the experiment. 相似文献
5.
Energy-based time derivative damage accumulation model under uniaxial and multiaxial random loadings
Shih-Chuan Tien Haoyang Wei Jie Chen Yongming Liu 《Fatigue & Fracture of Engineering Materials & Structures》2022,45(1):159-173
A new fatigue life prediction method using the energy-based approach under uniaxial and multiaxial random loadings is proposed. The uniqueness of the proposed model is based on a time-derivative damage accumulation unlike classical cycle-based damage accumulation models. Thus, damage under arbitrary random loading can be directly obtained using time-domain integration without cycle counting. First, a brief review of existing models is given focusing on their applicability to uniaxial/multiaxial, constant/random, and high cycle fatigue/low cycle fatigue loading regimes. Next, formulation of time-derivative damage model is discussed in detail under uniaxial random loadings. Then, an equivalent energy concept for general multiaxial loading conditions is used to convert the random multiaxial loading to an equivalent random uniaxial loading, where the time-derivative damage model can be used. Finally, the proposed model is validated with extensive experimental data from open literature and in-house testing under various constant and random spectrum loadings. 相似文献
6.
In this paper generalized criteria of multiaxial random fatigue based on stress, strain and strain energy density parameters in the critical plane have been discussed. The proposed criteria reduce multiaxial state of stress to the equivalent uniaxial tension–compression or alternating bending. Relations between the coefficients occurring in the considered criteria have been derived. Thus, it is possible to take into account fatigue properties of materials under simple loading states during determination of the multiaxial fatigue life. Presented models have successfully correlated fatigue lives of cast iron GGG40 and steel 18G2A specimens under constant amplitude in‐phase and out‐of‐phase loadings including different frequencies. 相似文献
7.
A critical plane-strain energy density criterion for multiaxial low-cycle fatigue life under non-proportional loading 总被引:2,自引:0,他引:2
X. Chen S. Xu & D. Huang 《Fatigue & Fracture of Engineering Materials & Structures》1999,22(8):679-686
A series of multiaxial low-cycle fatigue experiments was performed on 45 steel under non-proportional loading. The present evaluations of multiaxial low-cycle fatigue life were systematically analysed. A combined energy density and critical plane concept is proposed that considers different failure mechanisms for a shear-type failure and a tensile-type failure, and from which different damage parameters for the critical plane-strain energy density are proposed. For tensile-type failures in material 45 steel and shear-type failures in material 42CrMo steel, the new damage parameters permit a good prediction for multiaxial low-cycle fatigue failure under non-proportional loading. The currently used critical plane models are a special and simple form of the new model. 相似文献
8.
Peng Luo Weixing Yao Luca Susmel 《Fatigue & Fracture of Engineering Materials & Structures》2020,43(9):2024-2039
The plane with the maximum variance of the resolved shear stress is taken as the critical plane. Two algorithms are used along with the maximum variance method (MVM) to determine the orientation of the critical plane. The maximum variance of the normal stress on the potential critical planes is calculated to determine the one experiencing the maximum extent of fatigue damage. A new multiaxial cycle counting method is proposed to count cycles on the critical plane. The modified Wöhler curve method is used to assess fatigue damage. About 200 experimental results were collected from the technical literature to validate the approaches being proposed. The results show that the improved design technique being proposed is successful in assessing fatigue damage under variable amplitude multiaxial cyclic loading. 相似文献
9.
S.H. Iftikhar J. Albinmousa 《Fatigue & Fracture of Engineering Materials & Structures》2018,41(1):235-245
Fatigue failure is a complex phenomenon. Therefore, development of a fatigue damage model that considers all associated complexities resulting from the application of different cyclic loading types, geometries, materials, and environmental conditions is a challenging task. Nevertheless, fatigue damage models such as critical plane‐based models are popular because of their capability to estimate life mostly within ±2 and ±3 factors of life for smooth specimens. In this study, a method is proposed for assessing the fatigue life estimation capability of different critical plane‐based models. In this method, a subroutine was developed and used to search for best estimated life regardless of critical plane assumption. Therefore, different fatigue damage models were evaluated at all possible planes to search for the best life. Smith‐Watson‐Topper (normal strain‐based), Fatemi‐Socie (shear strain‐based), and Jahed‐Varvani (total strain energy density‐based) models are compared by using the proposed assessment method. The assessment is done on smooth specimen level by using the experimental multiaxial fatigue data of 3 alloys, namely, AZ31B and AZ61A extruded magnesium alloys and S460N structural steel alloy. Using the proposed assessment method, it was found that the examined models may not be able to reproduce the experimental lives even if they were evaluated at all physical planes. 相似文献
10.
A new critical plane‐energy model is proposed in this paper for multiaxial fatigue life prediction of metals. A brief review of existing methods, especially on the critical plane‐based and energy‐based methods, is given first. Special focus is on the Liu–Mahadevan critical plane approach, which has been shown to work for both brittle and ductile metals. One potential drawback of the Liu–Mahadevan model is that it needs an empirical calibration parameter for non‐proportional multiaxial loadings because only the strain terms are used and the out‐of‐phase hardening cannot be explicitly considered. An energy‐based model using the Liu–Mahadevan concept is proposed with the help of the Mróz–Garud plasticity model. Thus, the empirical calibration for non‐proportional loading is not needed because the out‐of‐phase hardening is naturally included in the stress calculation. The model predictions are compared with experimental data from open literature, and the proposed model is shown to work for both proportional and non‐proportional multiaxial loadings without the empirical calibration. 相似文献
11.
Design methods against multiaxial high‐cycle fatigue require the formulation of appropriate criteria that differ in the definition of critical measures introduced to quantify damage, as the amplitude of shear stress. The present paper proposes a novel approach to compute the amplitude of shear stress in multiaxial high‐cycle fatigue. The approach is based on the computation of the convex hull enclosing the stress history under investigation and is validated on proportional and non‐proportional paths in several dimensions and for different materials. High accuracy is achieved when compared with alternative methods from the literature. 相似文献
12.
Ales Gosar Marko Nagode Simon Oman 《Fatigue & Fracture of Engineering Materials & Structures》2019,42(1):307-320
This paper details an advanced method of continuous fatigue damage prediction of rubber fibre composite structures. A novel multiaxial energy‐based approach incorporating a mean stress correction is presented and also used to predict the fatigue life of a commercial vehicle air spring. The variations of elastic strain and complementary energies are joined to form the energy damage parameter. Material parameter α is introduced to adapt for any observed mean stress effect as well as being able to reproduce the well‐known Smith‐Watson‐Topper criterion. Since integration to calculate the energies is simplified, the approach can be employed regardless of the complexity of the thermo‐mechanical load history. Several numerical simulations and experimental tests were performed in order to obtain the required stress‐strain tensors and the corresponding fatigue lives, respectively. In simulations, the rubber material of the air spring was simulated as nonlinear elastic. The mean stress parameter α , which controls the influence of the mean stress on fatigue life, was adjusted with respect to those energy life curves obtained experimentally. The predicted fatigue life and the location of failure are in very good agreement with experimental observations. 相似文献
13.
A simple energy‐based model for nonproportional low‐cycle multiaxial fatigue life prediction under constant‐amplitude loading
下载免费PDF全文
![点击此处可从《Fatigue & Fracture of Engineering Materials & Structures》网站下载免费的PDF全文](/ch/ext_images/free.gif)
From the literature concerning the traditional nonproportional (NP) multiaxial cyclic fatigue prediction, special attentions are usually paid to multiaxial constitutive relations to quantify fatigue damage accumulation. As a result, estimation of NP hardening effect decided by the entire history path is always proposed, which is a challenging and complex task. To simplify the procedure of multiaxial fatigue life prediction of engineering components, in this paper, a novel effective energy parameter based on simple material properties is proposed. The parameter combines uniaxial cyclic plastic work and NP hardening effects. The fatigue life has been assessed based on traditional multiaxial fatigue criterion and the proposed parameter, which has been validated by experimental results of 316 L stainless steel under different low‐cycle loading paths. 相似文献
14.
G. Q. Sun D. Wang D. G. Shang 《Fatigue & Fracture of Engineering Materials & Structures》2013,36(10):1039-1050
The fatigue behaviour of nickel‐based GH4169 alloy was studied under multiaxial loading at 650 °C. During the middle and late stages of the fatigue life at 650 °C, the axial and shear maximum stresses continue to decrease and plastic strains continue to increase, while at 360 °C different phenomena are observed. The intergranular cracks and certain quantities oxygen were observed in the fracture surfaces. The damage of creep and oxidation are related to temperature and strain range. The life prediction results with a time‐dependent fatigue damage model show the time‐related factors have a certain influence on the fatigue damage. 相似文献
15.
Cumulative damage model based on equivalent fatigue under multiaxial thermomechanical random loading
Luo‐Jin Li De‐Guang Shang Dao‐Hang Li Long Xue Xiao‐Dong Liu Xiang Yin Cheng‐Cheng Zhang Bo Chen 《Fatigue & Fracture of Engineering Materials & Structures》2020,43(8):1851-1868
A new creep–fatigue damage cumulative model is proposed under multiaxial thermomechanical random loading, in which the damage at high temperature can be divided into the pure fatigue damage and the equivalent fatigue damage from creep. During the damage accumulation process, the elementary percentage of the equivalent fatigue damage increment is proportional to that of the creep damage increment, and the creep damage is converted to the equivalent fatigue damage. Moreover, combined with a multiaxial cyclic counting method, a life prediction method is developed based on the proposed creep–fatigue damage cumulative model. In the developed life prediction method, the effects of nonproportional hardening on the fatigue and creep damages are considered, and the influence of mean stress on damage is also taken into account. The thermomechanical fatigue experimental data for thin‐walled tubular specimen of superalloy GH4169 under multiaxial constant amplitude and variable amplitude loadings were used to verify the proposed model. The results showed that the proposed method can obtain satisfactory life prediction results. 相似文献
16.
Life prediction based on weight‐averaged maximum shear strain range plane under multiaxial variable amplitude loading
下载免费PDF全文
![点击此处可从《Fatigue & Fracture of Engineering Materials & Structures》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Z.‐Q. Tao D.‐G. Shang H. Liu H. Chen 《Fatigue & Fracture of Engineering Materials & Structures》2016,39(7):907-920
Based on Wang and Brown's reversal counting method, a new approach to the determination of the critical plane is proposed by the defined plane with a weight‐averaged maximum shear strain range under multiaxial variable amplitude loading. According to the determined critical plane, a detailed procedure of multiaxial fatigue life prediction is introduced to predict lives in the low‐cycle multiaxial fatigue regime. The proposed approach is verified by two multiaxial fatigue damage models and Miner's linear cumulative damage law. The results showed that the proposed approach can effectively predict the orientation of the failure plane under multiaxial variable amplitude loading and give a satisfactory life prediction. 相似文献
17.
J. LI Z. ZHANG Q. SUN C. LI 《Fatigue & Fracture of Engineering Materials & Structures》2011,34(4):280-290
This paper proposed a simple life prediction model for assessing fatigue lives of metallic materials subjected to multiaxial low‐cycle fatigue (LCF) loading. This proposed model consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane. Additional cyclic hardening developed during non‐proportional loading is included in the normal stress and strain terms. A computer‐based procedure for multiaxial fatigue life prediction incorporating critical plane damage parameters is presented as well. The accuracy and reliability of the proposed model are systematically checked by using about 300 test data through testing nine kinds of material under both zero and non‐zero mean stress multiaxial loading paths. 相似文献
18.
Multiaxial low‐cycle fatigue life evaluation under different non‐proportional loading paths
下载免费PDF全文
![点击此处可从《Fatigue & Fracture of Engineering Materials & Structures》网站下载免费的PDF全文](/ch/ext_images/free.gif)
W. L. Qu E. N. Zhao Q. Zhou Y.‐L. Pi 《Fatigue & Fracture of Engineering Materials & Structures》2018,41(5):1064-1076
This paper presents analytical and experimental investigations for fatigue lives of structures under uniaxial, torsional, multiaxial proportional, and non‐proportional loading conditions. It is known that the rotation of principal stress/strain axes and material additional hardening due to non‐proportionality of cycle loading are the 2 main causes resulting in shorter fatigue lives compared with those under proportional loading. This paper treats these 2 causes as independent factors influencing multiaxial fatigue damage and proposes a new non‐proportional influencing parameter to consider their combined effects on the fatigue lives of structures. A critical plane model for multiaxial fatigue lives prediction is also proposed by using the proposed non‐proportional influencing factor to modify the Fatemi‐Socie model. The comparison between experiment results and theoretical evaluation shows that the proposed model can effectively predict the fatigue life due to multiaxial non‐proportional loading. 相似文献
19.
Punit Arora Suneel K. Gupta Mahendra K. Samal Jayanta Chattopadhyay 《Fatigue & Fracture of Engineering Materials & Structures》2020,43(7):1327-1352
The present studies are aimed at validation of a newly developed critical plane model with respect to large variety of engineering materials used for different applications. This newly developed model has been recently reported by present authors. To strengthen general applicability of this model, multiaxial test database consisting of a wide variety of multiaxial loading paths have been considered. The strain paths include pure axial, pure torsion, in‐phase axial‐torsion, out‐of‐phase axial‐torsion with phase shift angles varying from 30° to 180° having sine/trapezoidal/triangular strain waveforms, with/without mean axial/shear strains and asynchronous axial‐torsion strain paths of different frequency ratios etc. The materials covered in present study are mainly categorized as ferrous and nonferrous alloys. In ferrous alloy category, material grades from plain carbon steel (mild steel, 16MnR, SA333 Gr. 6, E235 and E355), low‐alloy steel (1Cr‐Mo‐V and S460 N) and austenitic stainless steel (SS304, SS316L and SS347) have been considered. In nonferrous alloy category, aluminium alloys (2024T3‐Al, 7075T651‐Al, and PA38‐T6‐Al), titanium (pure titanium and TC4 alloy), cobalt base super‐alloy (Haynes 188), and nickel alloy (Inconel‐718) have been considered. The predicted and test fatigue lives are found in good agreement for all these materials and complex multiaxial loading paths. 相似文献
20.
Comparison of HCF life prediction methods based on different critical planes under multiaxial variable amplitude loading
下载免费PDF全文
![点击此处可从《Fatigue & Fracture of Engineering Materials & Structures》网站下载免费的PDF全文](/ch/ext_images/free.gif)
C. Wang D.‐G. Shang X.‐W. Wang H. Chen J.‐Z. Liu 《Fatigue & Fracture of Engineering Materials & Structures》2015,38(4):392-401
High‐cycle fatigue life prediction methods based on different critical planes, including the maximum shear stress (MSS) plane, the weighted average shear stress plane and the Maximum Variance shear stress plane, are compared by two multiaxial cycle counting methods, i.e. the main and auxiliary channels (MAC) counting and the relative equivalent stress counting. A modified damage model is used to calculate the multiaxial fatigue damage. Compared with the experimental lives for 7075‐T651 aluminium alloy, the predicted results show that the MSS method together with MAC counting is suitable for the multiaxial fatigue life prediction. 相似文献