A pre-metallocene single-site catalyst for olefin polymerization: the V(acac)<Subscript>3</Subscript> – Ali-Bu<Subscript>2</Subscript>Cl system

A combination of GPC, DSC, and ¹³C NMR data for an ethylene/1-hexene copolymer prepared with the V(acac)₃ - Ali-Bu₂Cl system at 5 °C shows that this catalyst system was one of the earliest pre-metallocene catalysts for olefin polymerization.     

Synthesis and self-assembly of miktoarm star copolymers of (polyethylene)2−(polystyrene)2

We report on the synthesis and self-assembly of a novel well-defined miktoarm star copolymer of (polyethylene)₂−(polystyrene)₂, (PE)₂−(PS)₂, with two linear crystalline PE segments and two PS segments as the building blocks based on chain shuttling ethylene polymerization (CSEP), click reaction and atom transfer radical polymerization (ATRP). Initially, alkynyl-terminated PE (PE-) was synthesized via the esterification of pentynoic acid with hydroxyl-terminated PE (PE−OH), which was prepared using CSEP with 2,6-bis[1-(2,6-dimethylphenyl) imino ethyl] pyridine iron (II) dichloride/methylaluminoxane/diethyl zinc and subsequent in situ oxidation with oxygen. (PE)₂−(OH)₂ was then obtained by the click reaction of PE- with diazido and dihydroxyl containing coupling agent. The two hydroxyl groups in (PE)₂−(OH)₂ were then converted into bromisobutyrate by esterification. At last, the (PE)₂−(PS)₂ miktoarm star copolymers were synthesized by ATRP of styrene initiated from (PE)₂−Br₂ macroinitiator. All the intermediates and final products were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behavior was studied by dynamic light scattering (DLS) and atomic force microscopy (AFM). The crystallization of the (PE)₂−(PS)₂ miktoarm star copolymers was studied by differential scanning calorimetry (DSC).     

Synthesis of a Novel Miktoarm Star Azobenzene Side-Chain Liquid Crystalline Copolymers by Atom Transfer Radical Polymerization

Summary A series of miktoarm star novel azobenzene side-chain liquid crystalline (LC) copolymers were synthesized by combination of atom transfer radical polymerization (ATRP) and chemical modification of the termini of ATRP-derived polymers. These miktoarm star copolymers carrying one polystyrene (PS) arm and two poly [6-(4-methoxy-4-oxy-azobenzene) hexylmethacrylate] (PMMAZO) arms were characterized by ¹H NMR and GPC. The liquid crystailline behavior of these copolymers was studied by DSC and POM. It was found that the miktoarm star copolymers have the similar LC properties to PMMAZO homopolymer, and their thermal stability of the mesophases is increased, while the phase transition enthalpies are reduced.     

BF<Subscript>3</Subscript>OEt<Subscript>2</Subscript>-coinitiated cationic polymerization of cyclopentadiene in the presence of water at room temperature

The cationic polymerization of cyclopentadiene (CPD) with 1-(4-methoxyphenyl)ethanol (1)/BF₃OEt₂ initiating system in CH₂Cl₂:CH₃CN 4:1 (v/v) mixture at room temperature and in the presence of water ([H₂O]/[BF₃OEt₂] up to 8) is reported. The number-average molecular weights of obtained polymers increased in direct proportion to monomer conversion or initial monomer concentration (M _n ≤ 4,000 g mol⁻¹) in agreement with calculated values, and were inversely proportional to initiator concentration. Polymer MWDs were relatively narrow (M _w/M _n = 1.4–1.7) up to 60% of monomer conversion. It was also shown that regioselectivity of CPD polymerization with 1/BF₃OEt₂ initiating system did not depend significantly on water, monomer, or initiator concentration (1,4-structures content was nearly 60% in all cases).     

Temperature programmed desorption of oxygen from Pd films interfaced with Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-doped ZrO<Subscript>2</Subscript>

The origin of the effect of non-faradaic electrochemical modification of catalytic activity (NEMCA) or Electrochemical Promotion was investigated via temperature-programmed-desorption (TPD) of oxygen, from polycrystalline Pd films deposited on 8 mol%Y₂O₃–stabilized–ZrO₂ (YSZ), an O²⁻ conductor, under high-vacuum conditions and temperatures between 50 and 250 °C. Oxygen was adsorbed both via the gas phase and electrochemically, as O²⁻, via electrical current application between the Pd catalyst film and a Au counter electrode. Gaseous oxygen adsorption gives two adsorbed atomic oxygen species desorbing at about 300 °C (state β₁) and 340–500 °C (state β₂). The creation of the low temperature peak is favored at high exposure times (exposure >1 kL) and low adsorption temperatures (T_ads < 200 °C). The decrease of the open circuit potential (or catalyst work function) during the adsorption at high exposure times, indicates the formation of subsurface oxygen species which desorbs at higher temperatures (above 450 °C). The desorption peak of this subsurface oxygen is not clear due to the wide peaks of the TPD spectra. The TPD spectra after electrochemical O²⁻ pumping to the Pd catalyst film show two peaks (at 350 and 430 °C) corresponding to spillover O_ads and according to the reaction:

Chemical and electrochemical characterization of TiO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> atomic layer depositions on AZ-31 magnesium alloy

In this study, innovative TiO₂/Al₂O₃ mono/multilayers were applied by atomic layer depositions (ALD) on ASTM-AZ-31 magnesium/aluminum alloy to enhance its well-known scarce corrosion resistance. Four different configurations of ALD layers were tested: single TiO₂ layer, single Al₂O₃ layer, Al₂O₃/TiO₂ bilayer and Al₂O₃/TiO₂/Al₂O₃/TiO₂ multilayer deposited using Al[(CH₃)]₃ (trimethylaluminum, TMA), and TiCl₄ and H₂O precursors. All depositions were performed at 120°C to obtain an amorphous-like structure of both oxide layers. The four coatings were then investigated using different techniques, such as scanning electron microscope (SEM), stylus profilometer, glow discharge optical emission spectrometry (GDOES) and polarization curves in 0.05-M NaCl solution. The thickness of all the coatings was around 100 nm. The layers compositions were successfully investigated by the GDOES technique, although obtained data seem to be affected by substrate roughness and differences in sputtering rates between ceramic oxides and metallic magnesium alloy. Corrosion resistance showed to be strongly enhanced by the nanometric coatings, giving lower corrosion current densities in 0.05-M NaCl media with respect to the uncoated substrate (from 10⁻⁴ to 10⁻⁶ A/cm² for the single layers and from 10⁻⁴ to 10⁻⁸ A/cm² for the bi- and multilayers). All polarization curves on coated samples also showed a passive region, wider for the bi-layer (from −0.58 to −0.43 V with respect to Ag/AgCl) and multilayer (from −0.53 to −0.38 V with respect to Ag/AgCl) structures.     

Synthesis and characterization of Ni–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite coatings containing different forms of alumina

Electrodeposited Ni–Al₂O₃ composite coatings were prepared using alumina powders synthesized from solution combustion method, precipitation method and a commercial source. Solution combustion synthesized alumina powder yielded α-phase; precipitation method yielded purely γ-phase; commercial alumina powder was a mixture of α-, δ- and γ-phases. A nickel sulfamate bath was used for electro-codeposition. The current densities (0.23 A dm⁻² for 20 h, 0.77 A dm⁻² for 6 h, 1.55 A dm⁻² for 3 h and 3.1 A dm⁻² for 1.5 h) and bath agitation speeds (100, 200, 600 and 1000 rpm) were varied. The pH variations of the bath were higher during the electrodeposition of combustion synthesized alumina. The effect of different forms of alumina particles on the microhardness and microstructure of the nickel composite coating was studied. Composite coating containing combustion synthesized alumina particles was found to have higher microhardness (550 HK). It was found that at lower agitation speed (100 rpm), bigger particles were incorporated and at higher agitation speed (1000 rpm), smaller particles were incorporated. The area fraction of alumina particles incorporated in nickel matrix was highest for commercial alumina (24%). This study shows that it is not suffice to take just the current density and stirring speeds into account to explain the properties of the coatings but also to take into account the source of particles and their properties.     

Microwave-assisted controlled copolymerization of styrene and acrylonitrile catalyzed by FeCl<Subscript>3</Subscript>/isophthalic acid

The copolymer of styrene-co-acrylonitrile (SAN) was synthesized by the atom transfer radical polymerization (ATRP) using FeCl₃-isophthalic acid (IA)/2,2′-azobis(isobutyronitrile) catalyst system under microwave irradiation (MI). Compared with conventional heating (CH), the copolymerization rate was accelerated under MI, and the conversion of monomer rapidly achieved 30% in 38 min for MI relative to 8% for CH under other same conditions. The kinetics results indicated that RATRP of St/AN is a ‘living’/controlled polymerization, corresponding to a linear increase of molecular weights with the increasing of monomer conversion and a relatively narrow polydispersities index (PDI < 1.25) when the conversion is beyond 30%. The resultant SAN was characterized by FT–IR, NMR, and GPC.     

Preparation and Characterization of Mesoporous MoO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> Composite with High Surface Area by Self-Supporting and Ammonia Method

Abstract  

A mesoporous MoO₃/TiO₂ composite was prepared from titanate derivative by consecutive self-supporting and ammonia method. All samples were characterized by X-ray Diffraction, N₂ adsorption–desorption, Raman Spectra and Field-Emission Scanning Electron Microscopy. The results showed that mesoporous MoO₃/TiO₂ composite had a higher surface area (173 m²/g) and a better MoO₃ dispersion than that prepared by traditional impregnation (90 m²/g). As for hydrodesulfurization tests, mesoporous MoO₃/TiO₂ composite in this case presented a better catalytic performance, attributed to its high surface area and good dispersion of MoO₃. It can be found that self-supporting played a key role in preparing mesoporous MoO₃/TiO₂ composite with high surface area. Additionally, aqueous ammonia could effectively dissolve excess MoO₃, which helped to obtain mesoporous MoO₃/TiO₂ composite with better dispersion of MoO₃.     

Preparation and properties of azobenzene-containing amphiphilic miktoarm star polymers

Summary A series of novel miktoarm star polymers composed of a poly(ethylene oxide) (PEO) and two side-chain liquid crystalline azobenzene-containing polymethacrylate (PEO-(PMMAZO)₂) were prepared using atom transfer radical polymerization (ATRP). Bifunctional macroinitiator PEO-Br₂ was synthesized by condensation reaction in two steps and characterized by ¹H NMR, ¹³C NMR and IR. Kinetic study showed that it was a first order reaction referred to the monomer MMAZO, namely, 6-(4-methoxy-4’-oxy-azobenzene)hexyl methacrylate. The liquid crystalline behaviors of the miktoarm star polymers were studied by differential scanning calorimetry (DSC) and polarized optical microscope (POM). They exhibited smectic and nematic mesophases when Mn was beyond 9.4×10³ g/mol. The phase transition temperatures of the smectic and nematic phases increased while the melting temperature of PEO decreased with increasing molecular weight of the LC block. Compared with diblock polymer PEO-PMMAZO, the melting temperature of PEO in miktoarm star polymer decreased more rapidly.     

HClO<Subscript>4</Subscript>-SiO<Subscript>2</Subscript>: An Efficient Reusable Catalyst for the Synthesis of 3,4,5-Trisubstituted 1,2,4-Triazoles Under Solvent-Free Conditions

Abstract  

A series of 3,4,5-trisubstituted 1,2,4-triazoles have been synthesized from N ³-substituted amidrazones and anhydrides using HClO₄-SiO₂ at 80 °C under solvent-free conditions. The products were obtained in excellent yields within 5–10 min. Therefore, the present method will be of wide application in organic chemistry and medicinal chemistry.     

A Highly Selective Pd(OAc)<Subscript>2</Subscript>/Pyridine/K<Subscript>2</Subscript>CO<Subscript>3</Subscript> System for Oxidation of Terpenic Alcohols by Dioxygen

Abstract  

Molecular sieves, complex organic bases and radical oxidants are commonly used in alcohols oxidation reactions. In this work, we have evaluated the beneficial effects of addition of K₂CO₃ to Pd(II)-catalyzed oxidation alcohols, which resulted in a remarkable increase in the oxidation reaction rates without selectivity losses. Herein, in a metallic reoxidant-free system, terpenic alcohols (β-citronellol, nerol and geraniol) were selectively converted into respective aldehydes from Pd(II)-catalyzed oxidation reactions in presence of dioxygen. High conversions and selectivities (greater than 90%) were achieved in the presence of the Pd(OAc)₂/K₂CO₃ catalyst and pyridine excess. The exogenous role of others auxiliary anionic and nitrogen compounds was appraised.     

Oxygen Isotope (<Superscript>18</Superscript>O<Subscript>2</Subscript>) Evidence on the Role of Oxygen in the Plasma-Driven Catalysis of VOC Oxidation

Abstract  

This paper reports isotopic evidence on nonthermal plasma-induced fixation of gas-phase oxygen on the surface of several catalysts such as TiO₂, Ag/TiO₂, Ag/γ-Al₂O₃ and Ag/MS-13X at atmospheric-pressure. On-line mass spectrometric analysis and stoichiometric comparison of reactants and products revealed that the fixed surface oxygen can be activated by nonthermal plasma. The fixed ¹⁸O by nonthermal plasma survived for a certain period of time (about 30 min), and involved in the formation of isotope-exchanged oxygen (¹⁸O¹⁶O) and isotope containing CO _x (CO and CO₂).     

Optimization of Opto-Electrical and Photocatalytic Properties of SnO<Subscript>2</Subscript> Thin Films Using Zn<Superscript>2+</Superscript> and W<Superscript>6+</Superscript> Dopant Ions

Abstract  

A series of Zn²⁺ and W⁶⁺ doped tin oxide (SnO₂) thin films with various dopant concentrations were prepared by spray pyrolysis deposition, and were characterized by X-ray diffraction, atomic force microscopy, contact angle, absorbance, current density–voltage (J–V) and photocurrent measurements. The results showed that W⁶⁺ doping can prevent the growth of nanosized SnO₂ crystallites. When Zn²⁺ ions were used, the crystallite sizes were proved to be similar with the undoped sample due to the similar ionic radius between Zn²⁺ and Sn⁴⁺. Regardless of the dopant ions’ type or concentration, the surface energy has a predominant dispersive component. By using Zn²⁺ dopant ions it is possible to decrease the band gap value (3.35 eV) and to increase the electrical conductivity. Photocatalytic experiments with methylene blue demonstrated that with zinc doped SnO₂ films photodegradation efficiencies close to 30% can be reached.     

Preparation and electrochemical performance of Li-rich layered cathode material,Li[Ni<Subscript>0.2</Subscript>Li<Subscript>0.2</Subscript>Mn<Subscript>0.6</Subscript>]O<Subscript>2</Subscript>, for lithium-ion batteries

The Li-rich layered cathode material, Li[Ni_0.2Li_0.2Mn_0.6]O₂, was synthesized via a “mixed oxalate” method, and its structural and electrochemical properties were compared with the same material synthesized by the sol–gel method. X-ray diffraction (XRD) shows that the synthesized powders have a layered O₃–LiCoO₂-type structure with the R-3m symmetry. X-ray photoelectron spectroscopy (XPS) indicates that in the above material, Ni and Mn exist in the oxidation states of +2 and +4, respectively. The layered material exhibits an excellent electrochemical performance. Its discharge capacity increases gradually from the initial value of 228 mA hg⁻¹ to a stable capacity of over 260 mA hg⁻¹ after the 10th cycle. It delivers a larger capacity of 258 mA hg⁻¹ at the 30th cycle. The dQ/dV curves suggest that the increasing capacity results from the redox-reaction of Mn⁴⁺/Mn³⁺.     

<Emphasis Type="Italic">m</Emphasis>-Cresol-substituted triethyl aluminum/MoCl<Subscript>5</Subscript>/TBP catalytic system for coordination polymerization of butadiene

Coordination polymerization of butadiene was initiated by a catalyst system consisting of tributyl phosphate (TBP) as ligand, molybdenum pentachloride as primary catalyst and triethyl aluminum substituted by m-cresol as co-catalyst. The effects of the substitution of m-cresol on the activity of the catalyst system, molecular weight and molecular weight distribution, intrinsic viscosity and microstructures of the resulting polymers were investigated in details. The molecular weight and molecular weight distribution of the polymerization products were determined by GPC. The microstructure of the polymerization products was characterized by FTIR, ¹³C NMR and DSC techniques. The experimental results indicated that the polymerization activity of the reaction system and the molecular weight of the polymerization products gradually increased with the increase of the substitution content of m-cresol, namely, Al(OPhCH₃)₂Et?>?Al(OPhCH₃)Et₂?>?Al(OPhCH₃)_0.5Et_2.5>AlEt₃. The 1,2-structure contents of the polymerization products could be adjusted between 89 and 91% through the control of the substitution of m-cresol, and there was minute quantities of crystalline structures in the resulting polymers due to the increasing content of the syndiotactic 1,2-polybutadiene. In a word, the existence and increase of steric hindrance of m-cresol made it easier for polymerization products to form interdisciplinary 1,2-structure.     

Design of Efficient Ce<Subscript>x</Subscript>M<Subscript>1−x</Subscript>O<Subscript>2−δ</Subscript> (M = Zr,Hf, Tb and Pr) Nanosized Model Solid Solutions for CO Oxidation

Abstract  

Nanosized Ce_xM_1−xO_2−δ (M = Zr, Hf, Tb and Pr) solid solutions were prepared by a modified coprecipitation method and thermally treated at different temperatures from 773 to 1073 K in order to ascertain the thermal behavior. The structural and textural properties of the synthesized samples were investigated by means of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), BET surface area, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy (RS) techniques. The catalytic efficiency has been performed towards oxygen storage/release capacity (OSC) and CO oxidation activity. The characterization results indicated that the obtained solid solutions exhibit defective cubic fluorite structure. The solid solutions of ceria–hafnia, ceria–terbia and ceria–praseodymium exhibited good thermal stability up to 1073 K. A new Ce_0.6Zr_0.4O₂ phase along with Ce_0.75Zr_0.25O₂ was observed in the case of ceria–zirconia solid solution due to more Zr⁴⁺ incorporation in the ceria lattice at higher calcination temperatures. The reducibility of ceria has been increased upon doping with Zr⁴⁺, Hf⁴⁺, Tb^3+/4+ and Pr^3+/4+ cations. This enhancement is more in case of Hf⁴⁺ doped ceria. Among various solid solutions investigated, the ceria–hafnia combination exhibited better OSC and CO oxidation activity. The high efficiency of Ce–Hf solid solution was correlated with its superior bulk oxygen mobility and other physicochemical characteristics.     

Biobased miktoarm star copolymer from soybean oil,isosorbide, and caprolactone

Soybean oil-based macroinitiator was prepared from epoxidized soybean oil. A ¹H NMR quantitative method was utilized for the characterization of this macroinitiator. A kind of renewable carbohydrate derivate, 1,4: 3,6-Dianhydro-D-glucitol 2-acrylate 5-acetate (AAI) was prepared as the substitute monomer of styrene. Series of renewable miktoarm star copolymers initiated by soybean oil macroinitiator were obtained by atom transfer radical polymerization (ATRP) of AAI and ring-opening polymerization (ROP) of ε-caprolactone sequentially. The obtained miktoarm star block copolymers were characterized by ¹H NMR, FTIR, and DSC. The DSC results show well dependence of the thermal behaviors of these miktoarm star block copolymers on the component of the two kinds of segments. A new strategy of renewable resource utilization has been provided on polymeric materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48281.     

A Chiral Salen-type Schiff Base Cu<Superscript>2+</Superscript> Complex for the Vinylic-type Polymerization of Norbornene

Abstract  

The chiral Salen-type Schiff base ligand H ₂ L (H ₂ L = (s)-(+)2,2′-bis(2-hydroxy-3-methoxybenzylideneamino)-1,1′-binaphthyl), was selected to obtain the new chiral Cu²⁺ complex CuL (1), which was found to catalyze the polymerization of norbornene (NBE). The complex shows the distinctively distorted geometry from a square-planar reactive center, this feature being suggested to account for the efficient catalysis on the vinylic-type polymerization of NBE, with moderate molecular weights and narrow molecular weight distributions.     

Syndiospecific Polymerization of Styrene Using Half-Titanocene Catalyst Covalently Supported on MgCl<Subscript>2</Subscript>/AlEt<Subscript>n</Subscript>(OEt)<Subscript>3-n</Subscript>

The novel half-titanocene catalyst bearing reactive functional amino group, η⁵-pentamethylcyclopentadienyltri(p-amino-phenoxyl) titanium [Cp^∗Ti(p-OC₆H₄NH₂)₃], was easily synthesized by the reaction of η⁵-pentamethylcyclopentadienyltrichloride titanium (Cp^∗TiCl₃) with p-amino phenol in the presence of triethyl amine (NEt₃). Cp^∗Ti(p-OC₆H₄NH₂)₃ covalently anchored on MgCl₂/AlEt_n(OEt)_3-n support obtained from the reaction of triethylaluminium (AlEt₃) with the adduct of magnesium chloride (MgCl₂) and ethanol (EtOH), has been investigated and used to catalyze syndiospecific polymerization of styrene. Influences of the support structure, cocatalyst, and the molar ratio of Al in methylaluminoxane (MAO) and Ti (Al_MAO/Ti) on catalytic activity, syndiotacticity and molecular weight of the resultant polystyrene were investigated. Compared with the corresponding Cp^∗Ti(p-OC₆H₄NH₂)₃ homogeneous catalyst, a considerable increase in activity and molecular weight of syndiotactic polystyrene (sPS) was observed for the Cp^∗Ti(p-OC₆H₄NH₂)₃-MgCl₂/AlEt_n(OEt)_3-n supported catalyst even at a relatively low Al_MAO/Ti ratio of 50, and the kinetics of polymerization was stable during the reaction process.