Upgrade of plasma density feedback control systemin HT-7 tokamak

The HT-7 is a superconducting tokamak in China used to make researches on the controlled nuclear fusion as a national project for the fusion research. The plasma density feedback control subsystem is the one of the subsystems of the distributed control system in HT-7 tokamak (HT7DCS). The main function of the subsystem is to control the plasma density on real-time. For this reason, the real-time capability and good stability are the most significant factors, which will influence the control results. Since the former plasma density feedback control system (FPDFCS) based on Windows operation system could not fulfill such requirements well, a new subsystem has to be developed. The paper describes the upgrade of the plasma density feedback control system (UPDFCS), based on the dual operation system (Windows and Linux), in detail.     

Conceptual design of Remote Control System for EAST tokamak

The international collaboration becomes popular in tokamak research like in many other fields of science, because the experiment facilities become larger and more expensive. The traditional On-site collaboration Model that has to spend much money and time on international travel is not fit for the more frequent international collaboration. The Remote Control System (RCS), as an extension of the Central Control System for the EAST tokamak, is designed to provide an efficient and economical way to international collaboration. As a remote user interface, the RCS must integrate with the Central Control System for EAST tokamak to perform discharge control function. This paper presents a design concept delineating a few key technical issues and addressing all significant details in the system architecture design. With the aim of satisfying system requirements, the RCS will select rich Internet application (RIA) as a user interface, Java as a back-end service and Secure Socket Layer Virtual Private Network (SSL VPN) for securable Internet communication.     

A Web-Based System for Remote Data Browsing in HT-7 Tokamak

HT-7 is the first superconducting tokamak device for fusion research in China.Many experiments have been performed on the HT-7 tokamak since 1994 with numerous satisfactory results achieved in the fusion research field. As more and better communication is required with other fusion research laboratories, remote access to experimental data is becoming increasingly important in order to raise the degree of openness of experiments and to expand research results. The web-based remote data browsing system enables authorized users in geographically different locations to view and search for experimental data without having to install any utility software at their terminals. The three-tier software architecture and thin client technology are used to operate the system effectively. This paper describes the structure of the system and the realization of its functions, focusing on three main points： the communication between the participating tiers, the data structure of the system and the visualization of the raw data on web pages.     

The Compression Algorithm for the Data Acquisition System in HT－7 Tokamak

HT-7 superconducting tokamak in the Institute of Plasma Physics of the Chinese Academy of Sciences is an experimental device for fusion research in China. The main task of the data acquisition system of HT-? is to acquire, store, analyze and index the data. The volume of the data is nearly up to hundreds of million bytes. Besides the hardware and software support, agreat capacity of data storage, process and transfer is a more important problem. To deal with this problem, the key technology is data compression algorithm. In the paper, the data format in HT-7 is introduced first, then the data compression algorithm, LZO, being a kind of portable lossless data compression algorithm with ANSI C, is analyzed. This compression algorithm, which fits well with the data acquisition and distribution in the nuclear fusion experiment, offers a pretty fast compression and extremely fast decompression. At last the performance evaluation of LZO application in HT-7 is given.     

Experiment and Operation of a LHCD—35kV／2.8MW／1000s High—Voltage Power Supply on HT—7 Tokamak

A-35kV/2.8MW/1000s high-voltage power supply(HVPS) for HT-7 superconducting tokamak has been built successfully.The HVPS is scheduled to run on a 2.45 GHz/1MW lower hybrid current drive(LHCD)^[1] system of HT-7 superoonducting tokamak before the set-up of HT-7 superconducting tokamak in 2003.The HVPS has a series of advantages such as good steady and dynamic response,logical computer program controlling the HVPS without and fault,operationa panel and experimental board for data acquisition.which both are grounded distinctively in a normative way to protec the main body of HVPS along with its attached equipments from dangers.Electric power cables and other control cables are disposed reasonably,to prevent singals from magnetic interference and ensure the precision of signal transfer.This paper involves the experiment and operation of a 35kV/2.8 MW/1000s HVPS^[2] for 2.45 GHz/1 MW LHCD system.The reliability and feasibility of the HVPS has been demonstrated in comparison with experimental results of original design and simulation data.     

The renewed HT-7 plasma control system based on real-time Linux cluster

In order to improve the synchronization, flexibility and expansibility of the plasma control on HT-7, a new plasma control system (HT-7 PCS) was constructed. The HT-7 PCS was based on a real-time Linux cluster with a well-defined, robust and flexible software infrastructure which was adapted from DIII-D PCS. In this paper, the hardware structure and system customization details for HT-7 PCS are reported. The plasma position and current control, plasma density control and off-normal event detection, which were realized in separated systems originally, have been integrated and implemented in such HT-7 PCS. All these control algorithms have been successfully validated in the last several HT-7 experiment campaigns. Good control performance has been achieved and the experiment results are discussed in the paper.     

Preliminary Design of Control Network for HT-7U Tokamak Cryogenic System

In the course of the cryoplant modernization,a control network will be set up inorder to facilitate the control,the supervision,the centralized data acquisition and the alarmhandling of the cryogenic system for HT-7U tokamak.The paper introduces the preliminarydesign of control network based on the Controller Link Network for HT-7U tokamak cryogenic     

基于CAMAC总线的交替式数据采集及实时监控系统研究

进行了一种称为交替式数据采集及实时监控系统的研究。该系统不仅能实现以较高频率进行任意时间的数据采集,还能在放电过程中以图形方式实时显示等离子体的各种参数供实验人员在线分析及控制。     

The Study of Heat Pulse Propagation on HT—7 Tokamak

The propagation of heat pulses originating from sawtooth activity has been studied on the HT-7 tokamak.Two theoretical models are used for determining electron heat diffusivity from the experimental data measured by a diagnostic system of soft x-ray diode-array.The results show that one model caaled dipole model is more suitable for HT-7 tokamak.In order to improve the signal-to-noise(S/N) ratio of the original signals,over a few tens of sawteeth are averaged to generatc nicc wavcforms.The apace-time evolution is found to be diffusive in character,which is consistent with the theoretical model.The electron heat diffusivity determined from heat pulse propagation is larger than determined from background plasma power balance.The variation of Xe in different discharge phases has been also discussed.     

HT-7 Multipoint Nd Laser Thomson Scattering Apparatus

1. IlltroductionThomson scattering diagnostic has been an important and standard method for measuring temperature and density profiles on all modern toka-maks, such as the TV Thotnson Scattering systemon TFTR [1], the LIDAR system on JET [2] and theNd:YAG laser Thomson scattering system on Dlll--D[3]. It has the attractive characteristics of not per-turbillg the plasma to be investigated and of derivingthe absolute values of electronic temperature Ti anddensity ne' From the knot'.led…     

LHCD Properties with a New Lower Hybrid Wave Antenna on HT-7 Tokamak

1 IntroductionLower hybrid current drive (LHCD) has become aneffective method to maintain plasma current in a toka-mak. Plenty of experimental results on the HT-7 toka-mak also show that LHCD is an important auxiliarymeans to achieve steady state operation of the toka-mak and to obtain plasmas with improved confine-ments [1~4]. In the experiments, lower hybrid wave(LHW) with a frequency of 2.45 GHz is launched intothe plasma by an LHW antenna. Since the power spec-trum of the launched …     

Study of the DEF Feedback Control System in AC Operation of Superconducting Tokamak

AC operation with multiple full cycles has been successfully performed on the superconducting tokamak HT-7. In the experiment, it was discovered that the saturation of the transformer magnetic flux with DEF, a signal name, was one of key aspects that affected the AC operation. The conditions of DEF were examined through the DEF feedback control system. By controlling the working patterns of the subsystems, namely the poloidal field control system and density control system, it was guaranteed that DEF would remain in the non-saturated status.     

Poloidal Field Control for the HT—7U Superconducting Tokamak

Controlling the poloidal field(PF) in the HT-7U superconducting tokamak is critical to the realization of the mission of advanced tokamak research.Plasma start-up,plasma position,shape,current control and plasma shape reconstruction have been performed as a part of its design process.The PF coils have been designed to produce a wide range of plasmas,Plasma start-up can be achieved for multiple conditions.Fast controlling coils for plasma position inside the vacuum vessel are sued for controloling the plasma vertical position on a short timescale.The PF coils control the plasma current and shape on a slower timescale,VXI(VME bus extensions for Instrumentation)Bus system and DSP(Digital Signal Processor is a basic unit of the feedback control system),the response time of which is about(2-4)ms.The basic unit of this system ,the shape-controlling algorithms of a few critical points on plasma boundary and real-time equilibrium fitting(RTEFIT)will be described in this paper.     

The BOUT Project; Validation and Benchmark of BOUT Code and Experimental Diagnostic Tools for Fusion Boundary Turbulence

1. IntroductionThe performance of tokarnaks and other toroidalmagnetic devices depends crucially on the dynamics of the boundary region, i.e., the transition regionfrOm the hot core plasma through the separatrix tothe matrial 8urfaC of the first wall. Plasma turbu-lence, and the resulting anomalous cross~field plasmatransport, are crucial physics processes in the bound-ary regiOn, Wting both core Plasma confinementand plasmawall interactions. ffeduction of anomalous plasma transport at the b…     

Finite Element Analyses and Instrumentation Layout for Single Coil Testing of TF Coils in HT-7U

The HT-7U tokamak is a magnetically-confined full superconducting fusion device, consisting of superconducting toroidal field (TF) coils and superconducting poloidal field (PF) coils. These coils are wound with cable-in-conductor (CICC) which is based on UNK NbTi wires made in Russian '. A single D-shaped toroidal field magnet coil will be tested for large and expensive magnets systems before assembling them in the toroidal configuration. This paper describes the layout of the instrumentation for a superconducting test facility based on the results of a finite element modeling of the single coil of toroidal magnetic field (TF) coils in HT-7U tokamak device. At the same time, the design of coil support structure in the test facility is particularly discussed in some detail.     

Control System of Neutral Beam Injection on HT-7

Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply， etc. The NBICS, consisting mainly of a Programmable Logic Controller (PLC) subsystem, data acquisition and processing subsystem and cryopump and vacuum pressure monitoring subsystem, has successfully been used on a NBI device. In this article, the design of NBICS on HT-7 is discussed and each subsystem is described in particular.In addition, some experimental results are reported which are very important data for further research related to the HT-7 tokamak.     

Alternate Data Acquisition and Real-time Monitoring System on HT-7 Tokamak

1 Introduction There are many tokamak devices over the world. Be- cause the tokamak device is based on the principle of a transformer, almost all tokamaks are pulse-operated and most of their discharge duration is within one or two minutes. A conventional data acquisition and anal- ysis system would be good enough for such devices. However, recent lower hybrid current-drive (LHCD) ex- periments such as those on the HT-7 and Tore Supra have generated discharges lasting several hundred sec- …     

Wall Recycling in Long Duration Discharges on the HT-7 Tokamak

The main efforts of HT-7 superconducting tokamak are directed to quasi-steady state discharges and relevant physics. Significant progress has been realized in obtaining high-performance discharges under a quasi-steady state in HT-7. The long pulse discharges have been obtained with duration up to more than one minute. Wall recycling has been studied in the long duration discharges in HT-7. The recycling coefficient R of each plasma increases with time. The uncontrolled density increase is accompanied by hydrogen and the impurity influx originating mainly from the limiter surface and the parts of the inner vessel. The edge recycling after boronization will also be discussed in this paper.     

Experimental Investigation of Lower Hybrid Wave Coupling in HT-7

Experiments on lower hybrid wave(LHW)coupling were investigated in the HT-7 tokamak.Good coupling of LHW plasma has been demonstrated at different conditions in the HT-7 tokamak.Relevant results have proved that LHW-plasma coupling is affected by the phase difference between adjacent waveguides.Furthermore,the edge density around the grill and relevant coupling can be adjusted by changing the plasma line average density or the gap value between the LH grill and the last closed flux surfaces(LCFS).It is found that the coupling of LHWs becomes poor when the edge density around the LH grill is large enough in the HT-7tokamak,and that coupling remains good with a proper edge density.With increasing LHW power,it is also found that the reflection coefficients(RCs)increase due to non-linear effects under conditions of low edge recycling,but can decrease under high edge recycling.The edge density depends mainly on the competition between the ponderomotive force(PMF)and the edge recycling intensity in the HT-7 tokamak.     

Ions Measurement at the Edge of HT-7 Tokamak

A reliable method of measuring ions and ion temperature in tokamak plasma is necessary, for which an omegatron-like instrument has been developed on the HT-7 tokamak. The basic layout of the omegatron-like instrument is shown in this article. The measurement of working gas ion has been performed in the last experimental campaign on HT-7 tokamak. The relations among ion current, the electron repeller voltage and trap voltage have been investigated. This omegatron-like instrument has also provided the edge-plasma ion temperature.