Eigendecomposition of Images Correlated on $S^{1}$, $S^{2}$, and $SO(3)$ Using Spectral Theory

Eigendecomposition represents one computationally efficient approach for dealing with object detection and pose estimation, as well as other vision-based problems, and has been applied to sets of correlated images for this purpose. The major drawback in using eigendecomposition is the off line computational expense incurred by computing the desired subspace. This off line expense increases drastically as the number of correlated images becomes large (which is the case when doing fully general 3-D pose estimation). Previous work has shown that for data correlated on S ¹ , Fourier analysis can help reduce the computational burden of this off line expense. This paper presents a method for extending this technique to data correlated on S ² as well as SO(3) by sampling the sphere appropriately. An algorithm is then developed for reducing the off line computational burden associated with computing the eigenspace by exploiting the spectral information of this spherical data set using spherical harmonics and Wigner-D functions. Experimental results are presented to compare the proposed algorithm to the true eigendecomposition, as well as assess the computational savings.     

Optimal $ Sigma Delta$ Modulator Architectures for Fractional-$ {N}$ Frequency Synthesis

This paper presents a comparative study of $Sigma Delta$ modulators for use in fractional-$ {N}$ phase-locked loops. It proposes favorable modulator architectures while taking into consideration not only the quantization noise of the modulator but also other loop nonidealities such as the charge pump current mismatch that contributes to the degradation in the synthesized tone's phase noise. The proper choice of the modulator architecture is found to be dependent upon the extent of the nonideality, reference frequency, and loop bandwidth. Three modulator architectures are then proposed for low, medium, and high levels of nonidealities.      

22.7-dB Gain $-$19.7-dBm $ICP_{1{rm dB}}$ UWB CMOS LNA

A fully differential CMOS ultrawideband low-noise amplifier (LNA) is presented. The LNA has been realized in a standard 90-nm CMOS technology and consists of a common-gate stage and two subsequent common-source stages. The common-gate input stage realizes a wideband input impedance matching to the source impedance of the receiver (i.e., the antenna), whereas the two subsequent common-source stages provide a wideband gain by exploiting RLC tanks. The measurements have exhibited a transducer gain of 22.7 dB at 5.2 GHz, a 4.9-GHz-wide B _3dB, an input reflection coefficient lower than -10.5 dB, and an input-referred 1-dB compression point of -19.7 dBm, which are in excellent agreement with the postlayout simulation results, confirming the approach validity and the design robustness.     

The Performance of Acoustic-Optical $Q$-switched Mode-Locking 1.34 $mu$m Nd:GdVO$_{4}$ Laser

A diode-end-pumped $Q$ -switched mode-locking $hbox{Nd:GdVO}_{4}$ laser operating at 1.34 $mu{hbox {m}}$ with an acousto-optical (AO) Q-switch in a compact V-type cavity was realized in our experiment for the first time. When the AO Q-switch repetition rate was 10 kHz, the maximum average output power of 750 mW and the pulse energy of 75 $muhbox{J}$ were obtained at the maximum incident pump power of 9 W. The mode-locking modulation depth of about 100% was obtained at certain pump power over the threshold. The mode-locked pulse inside in the $Q$-switched pulse had a repetition rate of 341 MHz, and its average pulsewidth was estimated to be about 350 ps. A developed rate equation model for the $Q$ -switched and mode-locked lasers with an AO Q-switch were proposed by using the hyperbolic secant functional methods. The results of numerical calculations of the rate equations were in good agreement with the experimental results.      

A Comparative NBTI Study of $hbox{HfO}_{2}$, $hbox{HfSiO}_{x}$, and SiON p-MOSFETs Using UF-OTF $I_{rm DLIN}$ Technique

The time, temperature, and oxide-field dependence of negative-bias temperature instability is studied in $hbox{HfO}_{2}/hbox{TiN}$, $ hbox{HfSiO}_{x}/hbox{TiN}$, and SiON/poly-Si p-MOSFETs using ultrafast on-the-fly $I_{rm DLIN}$ technique capable of providing measured degradation from very short (approximately microseconds) to long stress time. Similar to rapid thermal nitrided oxide (RTNO) SiON, $hbox{HfO}_{2}$ devices show very high temperature-independent degradation at short (submilliseconds) stress time, not observed for plasma nitrided oxide (PNO) SiON and $hbox{HfSiO}_{x}$ devices. $hbox{HfSiO}_{x}$ shows lower overall degradation, higher long-time power-law exponent, field acceleration, and temperature activation as compared to $hbox{HfO}_{2}$, which are similar to the differences between PNO and RTNO SiON devices, respectively. The difference between $ hbox{HfSiO}_{x}$ and $hbox{HfO}_{2}$ can be attributed to differences in N density in the $hbox{SiO}_{2}$ IL of these devices.      

Adaptive Blocker Rejection Continuous-Time $Sigma Delta $ ADC for Mobile WiMAX Applications

An adaptive blocker-rejection wideband continuous-time (CT) sigma-delta (SigmaDelta) analog-to-digital converter (ADC) is presented. An integrated blocker detector reconfigures the ADC loop architecture to avoid overloading in the presence of strong interferers, improving receiver channel selectivity and sensitivity without increasing its dynamic range (DR) requirements. The adaptive operation relaxes receiver baseband channel filtering requirements for a worldwide inter-operability for microwave access (WiMAX, IEEE 802.16e) receiver. The ADC achieves 71 dB of dynamic range (DR), 65 dB of peak SNDR and 68 dB of peak SNR over a 10 MHz signal bandwidth, consuming 18 mW from a 1.2 V supply. The ADC system reconfigures the loop filter topology within 51 mus, improving receiver selectivity without any transient impact on BER. In the blocker suppression mode, the ADC can withstand 30 dBc blocker at the adjacent channel, achieving - 22 dB error vector magnitude (EVM) with a 24 Mb/s 16-QAM signal. The IC is fabricated on a 130 nm 8-level metal, metal-insulator-metal (MIM) capacitor, CMOS technology, occupying 1.5 times 0.9 mm² silicon area.     

High-Performance Poly-Silicon TFTs Using a High-$k$ $hbox{PrTiO}_{3}$ Gate Dielectric

In this letter, a polycrystalline-silicon thin-film transistor (poly-Si TFT) with a high- $k$ $hbox{PrTiO}_{3}$ gate dielectric is proposed for the first time. Compared to TFTs with a $hbox{Pr}_{2}hbox{O}_{3}$ gate dielectric, the electrical characteristics of poly-Si TFTs with a $hbox{PrTiO}_{3}$ gate dielectric can be significantly improved, such as lower threshold voltage, smaller subthreshold swing, higher $I_{rm on}/I_{rm off}$ current ratio, and larger field-effect mobility, even without any hydrogenation treatment. These improvements can be attributed to the high gate capacitance density and low grain-boundary trap state. All of these results suggest that the poly-Si TFT with a high- $k$ $hbox{PrTiO}_{3}$ gate dielectric is a good candidate for high-speed and low-power display driving circuit applications in flat-panel displays.      

Impacts of $hbox{N}_{2}$ and $hbox{NH}_{3}$ Plasma Surface Treatments on High-Performance LTPS-TFT With High-$kappa$ Gate Dielectric

Low-temperature polycrystalline-silicon thin-film transistors (LTPS-TFTs) with high- $kappa$ gate dielectrics and plasma surface treatments are demonstrated for the first time. Significant field-effect mobility $mu_{rm FE}$ improvements of $sim$86.0% and 112.5% are observed for LTPS-TFTs with $hbox{HfO}_{2}$ gate dielectric after $hbox{N}_{2}$ and $ hbox{NH}_{3}$ plasma surface treatments, respectively. In addition, the $hbox{N}_{2}$ and $ hbox{NH}_{3}$ plasma surface treatments can also reduce surface roughness scattering to enhance the field-effect mobility $mu_{rm FE}$ at high gate bias voltage $V_{G}$, resulting in 217.0% and 219.6% improvements in driving current, respectively. As a result, high-performance LTPS-TFT with low threshold voltage $V_{rm TH} sim hbox{0.33} hbox{V}$, excellent subthreshold swing S.S. $sim$0.156 V/decade, and high field-effect mobility $mu_{rm FE} sim hbox{62.02} hbox{cm}^{2}/hbox{V} cdot hbox{s}$ would be suitable for the application of system-on-panel.      

Analytical Model of $I$– $V$ Characteristics of Arbitrarily Shallow p-n Junctions

For the first time, an analytical model of arbitrarily shallow p-n junctions is presented. Depending on the junction depth, electrical characteristics of ultrashallow p-n junctions can vary from the characteristics of standard Schottky diodes to standard deep p-n junctions. This model successfully unifies the standard Schottky and p-n diode expressions. In the crossover region, where the shallow doping region can be totally depleted, electrical characteristics phenomenologically substantially different from typical diode characteristics are predicted. These predictions and the accuracy of the presented model are evaluated by comparison with the MEDICI simulations. Furthermore, ultrashallow $hbox{n}^{+}$-p diodes were fabricated, and the anomalous behavior in the crossover regime was experimentally observed.      

A $Q$– $f$ Droop Curve for Facilitating Islanding Detection of Inverter-Based Distributed Generation

This paper presents a new method for islanding detection of distributed generation (DG) inverter that relies on analyzing the reactive power versus frequency (Q-f) characteristic of the DG and the islanded load. The proposed method is based on equipping the DG interface with a Q-f droop curve that forces the DG to lose its stable operation once an islanding condition occurs. A simple passive islanding detection scheme that relies on frequency relays can then be used to detect the moment of islanding. The performance of the proposed method is evaluated under the IEEE 1547 and UL 1741 antiislanding test configuration. The studies reported in this paper are based on time-domain simulations in the power systems computer-aided design (PSCAD)/EMTDC environment. The results show that the proposed technique has negligible nondetection zone and is capable of accurately detecting islanding within the standard permissible detection times. In addition, the technique proves to be robust under multiple-DG operation.     

2 MHz AO $Q$ -switched ${rm TEM}_{00}$ Grazing Incidence Laser With 3 at.% Neodymium Doped Nd:YVO$_{4}$

We present a detailed experimental and theoretical study of the ultrahigh repetition rate AO $Q$ -switched ${rm TEM}_{00}$ grazing incidence laser. Up to 2.1 MHz $Q$-switching with ${rm TEM}_{00}$ output of 8.6 W and 2.2 MHz $Q$ -switching with multimode output of 10 W were achieved by using an acousto-optics $Q$ -switched grazing-incidence laser with optimum grazing-incidence angle and cavity configuration. The crystal was 3 at.% neodymium doped Nd:YVO$_{4}$ slab. The pulse duration at 2 MHz repetition rate was about 31 ns. The instabilities of pulse energy at 2 MHz repetition rate were less than ${pm}6.7hbox{%}$ with ${rm TEM}_{00}$ operation and ${pm}3.3hbox{%}$ with multimode operation respectively. The modeling of high repetition rate $Q$-switched operation is presented based on the rate equation, and with the solution of the modeling, higher pump power, smaller section area of laser mode, and larger stimulated emission cross section of the gain medium are beneficial to the $Q$-switched operation with ultrahigh repetition rate, which is in consistent with the experimental results.      

$C$ -Band Optical 90$^{circ}$ -Hybrids Based on Silicon-on-Insulator 4 $times$ 4 Waveguide Couplers

We demonstrate 4times4 multimode interference couplers in a silicon-on-insulator rib waveguide technology that enable compact integrated fully passive optical 90deg-hybrid devices with operation across the C-band.     

Leakage Minimization of SRAM Cells in a Dual-$V_t$ and Dual-$T_{rm ox}$ Technology

Aggressive CMOS scaling results in low threshold voltage and thin oxide thickness for transistors manufactured in deep submicrometer regime. As a result, reducing the subthreshold and tunneling gate leakage currents has become one of the most important criteria in the design of VLSI circuits. This paper presents a method based on dual- V t and dual- T _ox assignment to reduce the total leakage power dissipation of static random access memories (SRAMs) while maintaining their performance. The proposed method is based on the observation that read and write delays of a memory cell in an SRAM block depend on the physical distance of the cell from the sense amplifier and the decoder. Thus, the idea is to deploy different configurations of six-transistor SRAM cells corresponding to different threshold voltage and oxide thickness assignments for the transistors. Unlike other techniques for low-leakage SRAM design, the proposed technique incurs neither area nor delay overhead. In addition, it results in a minor change in the SRAM design flow. The leakage saving achieved by using this technique is a function of the values of the high threshold voltage and the oxide thickness, as well as the number of rows and columns in the cell array. Simulation results with a 65-nm process demonstrate that this technique can reduce the total leakage power dissipation of a 64 times 512 SRAM array by 33% and that of a 32 times 512 SRAM array by 40%.     

Dual-Gate Graphene FETs With $f_{T}$ of 50 GHz

A dual-gate graphene field-effect transistor is presented, which shows improved radio-frequency (RF) performance by reducing the access resistance using electrostatic doping. With a carrier mobility of 2700 cm²/V · s, a cutoff frequency of 50 GHz is demonstrated in a 350-nm-gate-length device. This f_T value is the highest frequency reported to date for any graphene transistor, and it also exceeds that of Si MOS field-effect transistors at the same gate length, illustrating the potential of graphene for RF applications.     

A 0.1 mm$^{2}$ , Wide Bandwidth Continuous-Time $SigmaDelta$ ADC Based on a Time Encoding Quantizer in 0.13 $mu$ m CMOS

The ADC shown in this paper uses an innovative sigma-delta (SigmaDelta) architecture that replaces the flash quantizer and mismatch corrected DAC of a multibit continuous time (CT) modulator by a time domain encoder similar to a PWM modulator to reduce the effective ADC area. The modulator achieves the resolution of a multibit design using single bit circuitry by concentrating most of the quantization error energy around a single frequency, which is afterwards removed, seizing the zeros of a sinc decimation filter. The non flat error spectrum is accomplished by use of two filter loops, one of which is made to operate in a self-oscillating mode. An experimental CT-SigmaDelta ADC prototype has been fabricated in 0.13 mum CMOS which implements a third order modulator with two operating modes. Measurements show an effective number of bits (ENOB) of 10 bits and 12 bits in a signal bandwidth of 17 MHz and 6.4 MHz, respectively, and a power-efficient figure of merit (FoM = Pwr/2 middot BW middot 2^ENOB) of 0.48 pJ/conversion at 1.5 V supply. The active area of the ADC is 0.105 mm².     

Pulsed $I_{d}$– $V_{g}$ Methodology and Its Application to Electron-Trapping Characterization and Defect Density Profiling

The pulsed current–voltage ($I$– $V$) measurement technique with pulse times ranging from $sim$17 ns to $sim$ 6 ms was employed to study the effect of fast transient charging on the threshold voltage shift $Delta V_{t}$ of MOSFETs. The extracted $Delta V_{t}$ values are found to be strongly dependent on the band bending of the dielectric stack defined by the high-$kappa$ and interfacial layer dielectric constants and thicknesses, as well as applied voltages. Various hafnium-based gate stacks were found to exhibit a similar trap density profile.      

High Density and Low Leakage Current in $ hbox{TiO}_{2}$ MIM Capacitors Processed at 300 $^{circ} hbox{C}$

We report Ir/TiO₂/TaN metal-insulator-metal capacitors processed at only 300degC, which show a capacitance density of 28 fF/mum² and a leakage current of 3 times 10^-8 (25degC) or 6 times 10^-7 (125degC) A/cm² at -1 V. This performance is due to the combined effects of 300degC nanocrystallized high-kappa TiO₂, a high conduction band offset, and high work-function upper electrode. These devices show potential for integration in future very-large-scale-integration technologies.     

High-Performance $hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}$ -Channel MOSFETs With High-$kappa$ Gate Dielectrics and $alpha$-Si Passivation

Long and short buried-channel $hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}$ MOSFETs with and without $alpha$-Si passivation are demonstrated. Devices with $alpha$-Si passivation show much higher transconductance and an effective peak mobility of 3810 $hbox{cm}^{2}/ hbox{V} cdot hbox{s}$. Short-channel MOSFETs with a gate length of 160 nm display a current of 825 $muhbox{A}/muhbox{m}$ at $V_{g} - V_{t} = hbox{1.6} hbox{V}$ and peak transconductance of 715 $muhbox{S}/muhbox{m}$. In addition, the virtual source velocity extracted from the short-channel devices is 1.4–1.7 times higher than that of Si MOSFETs. These results indicate that the high-performance $hbox{In}_{0.7}hbox{Ga}_{0.3} hbox{As}$-channel MOSFETs passivated by an $alpha$ -Si layer are promising candidates for advanced post-Si CMOS applications.      

Reconstruction From Limited-Angle Projections Based on $delta-u$ Spectrum Analysis

This paper proposes a sparse representation of an image using discrete ?-u functions. A ?-u function is defined as the product of a Kronecker delta function and a step function. Based on the sparse representation, we have developed a novel and effective method for reconstructing an image from limited-angle projections. The method first estimates the parameters of the sparse representation from the incomplete projection data, and then directly calculates the image to be reconstructed. Experiments have shown that the proposed method can effectively recover the missing data and reconstruct images more accurately than the total-variation (TV) regularized reconstruction method.     

Compact Variable ${rm TE}$-${rm TM}$ Polarization Splitter Based on Simplified Coherent Coupling in Lithium Niobate

A compact-sized electrically tunable ${rm TE}$- ${rm TM}$ mode splitter composed of a mode converter and an asymmetric Y-branch structure is presented. The asymmetric Y-branch consists of a straight and a bent waveguides to split two polarization modes based on the mode-sorting effect. To shorten the device length, a simplified coherently coupled-bending structure is utilized for the bent waveguide. Experimental results show that the device length is reduced about 52%, extinction ratios of both ${rm TE}$ and ${rm TM}$ modes are higher than 25 dB, yet the applied voltage is not significantly increased.