Bone grafting materials for dental applications: a practical guide

A variety of grafting materials are available for use in dental applications. Autogenous bone is the material of choice because of its osteogenic properties, which allow bone to form rapidly and under conditions where significant bone augmentation or repair is required. For other dental applications, allografts and alloplasts are appropriate. Knowing the physical and chemical properties of these materials and their mechanism of action, the correct graft or combination of grafts can be selected for each situation encountered. This article discusses current bone grafting options as reported in the literature since 1984. It emphasizes acquainting the reader with currently available materials and their properties.     

Reharvest of iliac crest donor site cancellous bone

Patients requiring cancellous bone grafting of an extensive deficit or multiple bone grafting procedures often lack a sufficient quantity of autogenous cancellous bone. Canine studies have indicated that a potential exists for reharvesting autogenous cancellous bone from an iliac crest donor site using a trapdoor harvesting technique. However, significant human experience with this procedure has been lacking. This report describes four patients who underwent successful reharvesting of an iliac crest donor site that provided clinically sufficient autogenous cancellous bone graft material to treat an ongoing or a new skeletal problem. These patients all met specific criteria regarding use of the trapdoor method of bone graft harvest and a minimum 24-month interval between bone grafting procedures. Preoperative computed tomography scanning of the iliac crest was useful in documenting that sufficient cancellous bone was available for reharvest. It appears that iliac crest donor site reharvesting is a specific advantage of the trapdoor technique and is a possible alternative to multiple site grafting or the use of allograft or bone substitute materials.     

Clinical use of a bioactive glass particulate in the treatment of human osseous defects

The dental practitioner has a wide choice of materials available for use in bone grafting procedures. A bioactive glass particulate possesses many favorable qualities not often found in other materials, including the ability to remain where placed even with adjacent suctioning; hemostasis; and incorporation into the host bone without the fibrous encapsulation encountered with most other synthetic materials. It is also quick and easy to prepare. This article reviews clinical experiences with PerioGlas in the setting of private practice periodontics, in which this material was used as the grafting material for periodontal defects, apicoectomies, cysts, and ridge augmentation and maintenance procedures, as well as for implant repairs. Several cases detail the advantages of this grafting material.     

Minimally invasive iliac cancellous bone graft harvesting

We have described a technique for harvesting cancellous bone from the ilium that is minimally invasive and safe. This technique results in minimal donor-site morbidity, is quick and easy to perform without the need for special equipment or instruments, and allows a two-team operative approach. Sufficient bone graft material can be obtained for wide or bilateral clefts. We now use this technique routinely to harvest cancellous bone for secondary alveolar bone grafting in children with clefts. The procedure could be used in adults, it could also be used to obtain bone graft for treating other conditions, and other donor sites could be approached with the same technique.     

Alveolar bone grafting in unilateral complete cleft lip and palate patients

Autogenous bone graft of an alveolar cleft area has the following advantages: (1) assistance in the closure of buccoalveolar oronasal fistula; (2) provision of bony support for unerupted teeth and teeth adjacent to the cleft; (3) formation of a continuous alveolar ridge to facilitate orthodontic correction of malocclusion; (4) supporting the nostril floor and alar base to improve nasal aesthetics. It has been well accepted in most craniofacial centers as routine procedure in cleft lip and palate rehabilitation. A new surgical technique for alveolar bone grafting has been introduced to the Chang Gung Craniofacial Center since July 1991. It provided a good exposure of the alveolar cleft, primary closure of the fistula and adequate volume of bone graft. A review of 27 consecutive alveolar bone grafting procedures performed in unilateral cleft lip and palate patients from July 1991 to June 1992 was presented. Patients have been followed up for at least 6 months. The alveolar bone graft was evaluated clinically and radiologically at one week, six months and one year after the surgery. The preliminary results indicated that the new surgical technique produced less chance of recurrent fistula, good postoperative gingival height, and improvement of nasal aesthetics. Based on the results of this new study we strongly advocate the use of this new surgical technique.     

Genomic organization of the flt-1 gene encoding for vascular endothelial growth factor (VEGF) receptor-1 suggests an intimate evolutionary relationship between the 7-Ig and the 5-Ig tyrosine kinase receptors

Impaction allografting with cement is the only technique currently available which reverses the diminution of bone stock that occurs in a revision hip arthroplasty, and as such, has great potential. It is particularly appropriate in the younger patient, though older patients may also benefit from the technique. Although the short term results are encouraging, there is a need for further basic science research to determine the optimal graft material and prosthesis design. Refinements in surgical instrumentation and technique will continue to improve the predictability of the clinical result and expand the indications for this important addition to the available options in revision hip arthroplasty.     

不同弹性模量的基台-种植体组合对周围成骨性能的影响

利用有限元分析软件计算了不同静力作用下的多种基台-种植体周围骨组织的应力分布.模拟结果显示, 基台-种植体组合中Ti6Al4V钛合金-聚醚醚酮(TC4-PEEK)相对于其他实验组其应力集中程度现象可以有效降低, 周围骨组织的应力分布较为均匀, 最大应力值为40~60 MPa.在轴向加载条件下, 不同基台-种植体系统中PEEK种植体的应力水平较小, 而周围骨组织应力水平较大; 在斜向45°加载条件下, 相对于其他两种基台-种植体系统, TC4-PEEK的应力水平更低, 其周围骨组织中的皮质骨承受的最大应力值为55 MPa, 松质骨承受的最大应力值为5 MPa, 综合来看的应力水平最小, 有助于骨沉积和成骨量增加, 从而有效提高种植体的界面稳定性.      

Predictors of underlying coronary artery disease in cocaine associated myocardial infarction: a meta-analysis of case reports

A preliminary report presenting the results of fibular strut grafting in the severely resorbed mandibular and maxillary region is presented. Thirteen patients were treated due to severe resorption of alveolar and basilar bone of 49 segments of the mandible and the maxilla. Two patients additionally had pathological fractures of the mandible. In 10 cases the strut graft was harvested by means of a new minimally invasive technique. After modelling the fibular bone it was fixed to the recipient site by miniscrews or implants. After a mean follow-up period of 20 months (max. 31, min. 11 months) a retrospective analysis of clinical and radiological findings was carried out. It showed that a mean augmentation of 16 mm was achieved. Compared to other studies the fibular strut graft was resorbed less, and due to the primary stability it could be used for the treatment of fractures of the mandible. No more than natural resorption was observed when the patients received their prostheses fixed to dental implants.     

Isolation of human osteoblast-like cells and in vitro amplification for tissue engineering

As the field of dental implants continues to grow at a rapid rate so does our quest to find new techniques to enhance bone grafting. Tissue engineering is an exciting new technique in bone grafting. Therefore, the purposes of this study were to develop a simple, reproducible method to isolate human osteoblast-like cells (HOBs) and to evaluate in vitro cell proliferation within 2 different 3-dimensional (3-D) constructs targeted for tissue engineering applications. Ultimately, HOBs that have been amplified within 3-D constructs may be employed for bone regeneration techniques, such as onlay and sinus grafting prior to implant placement. Our cell isolation protocol employed human fetal calvaria tissue sequentially digested with trypsin and collagenase. The HOB cells from only the third and fourth digests were obtained, cultured and evaluated within the constructs. An osteoblast-like phenotype was in part verified for these HOB cells by demonstrating a significantly higher alkaline phosphatase activity than for human gingival fibroblasts, and a comparable level to the osteoblast cell line MG-63. The HOB cells were cultured within either poly (D,L-lactide) (PLA) or a fused fiber ceramic and evaluated for the ability to support in vitro HOB amplification. HOB proliferation was validated by scanning electron microscopy, identifying cells throughout the 3-D constructs. Continuous cell viability was demonstrated for the duration of the 33-day evaluation period and the extent of cell amplification reached approximately 20 times the seeding density. The in vitro amplification results further indicate that tissue engineering strategies with either the PLA or fused fiber construct may be suitable for bone regeneration therapy for dental implants.     

Short-term healing following the use of calcium sulfate as a grafting material for sinus augmentation: a clinical report

Because of the frequent lack of bone in the posterior maxilla, sinus augmentation has become a commonly practiced treatment modality. Many different materials have been used for augmenting the sinus, and the ideal graft is yet to be found. The present article reports the results of sinuses grafted with calcium sulfate in 2 patients. Bone biopsies were harvested 9 months after the augmentation procedure. In the first patient, 3 titanium threaded-cylinder implants were placed in the grafted area after 9 months, while in the second, 1 acid-etched, screw-shaped titanium implant was placed simultaneously with the graft. Light microscopic evaluation revealed new bone formation with ongoing remodeling and progressive lamellar maturation in the specimens. No remnants of the alloplastic material were detectable in any section, either within the bone or in the medullary tissue. When reevaluated at the uncovering procedure, the implants were radiographically and clinically judged to be osseointegrated. These observations suggest that, when used in the appropriate form and with the proper technique, calcium sulfate is a promising graft material for sinus augmentation, producing adequate quantity and quality of new bone for implant placement.     

Reconstruction of an atrophic edentulous maxilla with unilateral cleft lip and palate (UCLP) using sub-antral augmentation and osseointegrated implants: case report and 3-year follow-up

With the current sophisticated, multidisciplinary approach to the treatment of cleft palate, it is anticipated that most patients with this deformity will enjoy good dental health and function. However, due to the number of older adults who were not treated with primary bone grafting and orthodontic therapy, there remains a significant number of potential candidates who may benefit from dental implants and implant-supported prostheses. Although it was not necessary in this case, a pharyngeal extension may be added to the maxillary denture to further improve speech and deglutition. This case report presents a three-year follow-up of a complex reconstruction of a highly compromised, edentulous patient. Stable fixation of the maxillary prosthesis results in a complete return to function in an individual for whom traditional dental prosthetics had resulted in ten years of failure and frustration. Combining the disciplines of reconstructive surgery and implant prosthetics enables the clinician to achieve a predictable result (Figures 12 and 13). While this case represents an extreme example, there are millions of patients for whom implant dentistry can provide life-changing benefits.     

Histological comparison of early wound healing following dense hydroxyapatite granule grafting and barrier placement in surgically-created bone defects neighboring implants

The purpose of this study was to examine early wound healing following grafting of dense hydroxyapatite granules (HA granules) and barrier placement in surgically-created bone defects surrounding implants. Eight healthy adult dogs with an average weight of 15 kg were used in this study. Thirty-two bone defects measuring 4 mm x 4 mm were removed with a surgical bur to form continuous bucco-lingual bone defects and 32 implants (16 titanium [Ti]) and 16 hydroxyapatite-coated [HA]) were then placed into the defects. Four implant groups were created: 1) grafting HA; 2) covering with an expanded polytetrafluoroethylene (ePTFE) membrane; 3) grafting HA and covering with ePTFE membrane; and 4) control (no treatment). Animals were sacrificed 28 days after surgery. Histological sections revealed large amounts of newly-formed bone in all bone defects surrounding the implants treated with ePTFE membranes alone. Fibrous encapsulation of HA granules was observed in the defects of the HA granules grafting group. In the group with grafting of HA granules and covering with ePTFE membranes, small amounts of bone tissue were observed among HA granules, but most HA granules were surrounded with fibrous tissue. Bone defects were completely filled with connective tissue in the control group. There were no differences in the histological findings between Ti and HA-coated implants in all cases. Histomorphometric data disclosed that the presence of HA granules in the bone defects significantly arrested bone formation. Our study suggests that the grafting of dense HA into bone defects surrounding implants will result in fibrous healing during the early healing stage.     

Hereditary angio-oedema: new clinical observations and autoimmune screening, complement and kallikrein-kinin analyses

Sinus cavities are often a major obstacle to the placement of dental implants in the posterior maxilla, especially when early tooth loss has occurred. Several grafting procedures aimed at reducing the expanded volume of these pneumatic cavities have been routinely utilized since 1979. Essentially, these techniques have consisted of recreating the necessary viable bone volume at the floor of sinus cavities by placing different bone substitute materials to allow for the insertion of endosseous implant devices. The progress achieved in the refinement of the surgical procedures and the knowledge acquired in the field of patient screening and selection, choice of biomaterials, management of complications, etc., have made sinus graft surgery highly codified and predictable. A comprehensive statistical study by multifactorial procedures was carried out to establish a Burt Contingency Chart. This chart visualizes the frequencies of all the "modality combinations" among the selected "qualitative parameters" and, by a " factorial analysis", the "multiple correlations", so that the "statistical affinities" that may exist among the same variables can be determined. This critical study endeavors to search for and reveal the favorable clinical, biologic and scientific parameters necessary for the success of sinus graft surgery on short-, medium-, and long-term bases (more than nine years). It is a particularly homogenous study, since all the operative procedures have been carried out exclusively by the author under standardized conditions. The wide variety of biomaterials utilized by the author since 1979 shows the development of bone substitute biomaterials as they have been introduced into the market during the past 15 years. The large number of patients treated, the variety of grafting materials, the important success rate obtained, and the long duration of patient follow-up have been instrumental in enabling us to establish scientifically significant results. Autogenous bone and its combinations with calcium- and phosphorus-containing biomaterials remain undoubtedly the best all-purpose biomaterials. The synthetic biomaterials have their own specific indications according to their stable (non-resorbable) or unstable (resorbable) nature and their rates of metabolic "turnover". Differently treated bones from the tissue bank (if not contaminated or immunologically questionable) behave in a fashion not unlike autogenous bone. Root-form implants are by far the best implants in the reconstructed sinus sites, while other implant types (subperiosteal implants, etc.) inserted beneath the reinforced osseous sinus floor, buccal wall, and pyramidal process, also have their indications.     

Misrepresentation of publications by applicants for radiology fellowships: is it a problem?

In light of the recently described experimental technique of in vivo bone reconstitution with biotechnologic methods (from bone marrow stromal cells) and the prefabrication flap procedures, the possibility to obtain autologous bone growth in a myocutaneous flap, thus creating a composite osteomyocutaneous preformed flap, is postulated. Human bone marrow stromal cells were delivered into the latissimus dorsi of athymic mice by a porous hydroxyapatite ceramic model. Eight weeks after the implantation, histologic examination revealed the presence of spongious bone tissue. A simple myocutaneous flap was thus transformed into a composite osteomyocutaneous flap. This flap is called the biotechnologic prefabricated flap, because it was the result of ex vivo expanded osteogenic precursor cells and in vivo bone tissue neoformation. The shape of the bone flap was exactly the same as the shape of the ceramic model used. A possible clinical application may be the correction of skeletal defects. The advantages of this procedure are simple surgical execution, the possibility of preshaping the graft to the exact characteristics of the defect, and the availability of autogenous donor tissue without donor site morbidity.     

Investigation of protein folding by mass spectrometry

Bone repair by regeneration as we know it continues to undergo changes, with advances approaching that may change our treatment of patients with craniofacial deformities and skeletal defects. Perhaps by the turn of the century, patients born with asymmetric deformities due to lack of growth will be treated early in life by skeletal stretching, and then later in life by skeletal distraction that is followed by use of accelerating factors to assist the healing processes. All of these available modalities are part of the regeneration of new bone formation. The future of such changes is very interesting, and our ability to help our patients will be maximized. We may even look back 25 years from now at bone grafting and find it to be obsolete and crude. It is hoped that with the new modalities being developed, we will not deviate from the use of a bone grafting procedure, which is the workhorse of the craniofacial surgeon. Bone grafting is used by all surgeons working on the craniofacial skeleton despite the problems of unpredictability of healing and an inability to calculate what percentage of the original graft will survive. The transplantation issue will be solved. The problems with donor site morbidity will continue. The use of inorganic bone substitutes will continue to have its limitation, particularly in type II wounds, which we as plastic surgeons see in the craniofacial region. As we redefine our approach to skeletal repair, we may look back and find solutions to some of the major problems we have had. The rapid stretch of soft tissue after facial advancement or structural alteration that is accompanied by a relapse due to the elastic recoil of the soft tissue could be eliminated by gradual distraction. The bone will undergo better functional adaptation when it has a gradual change in structure based on adjustment and molding in a gradual fashion. The problem of donor site morbidity and a prediction formula for bone could be resolved with new bone formation in situ by mineralization of the area under repair. Bone healing enhancers are here to stay and their clinical application will produce a far-reaching better final outcome (Fig. 11).     

Ridge augmentation with guided bone regeneration and GTAM case illustrations

The principle of Guided Bone Regeneration (GBR) can be used for Ridge Augmentation. These case illustrations describe the technique using Autogenous Cortico-Cancellous Bone Grafts and stabilization with Miniscrews and placement of a GTAM Barrier Membrane. Nyman et al (1990) published the first report of enlargement of a reduced alveolar ridge. Becker & Becker, Jovanovic, Buser et al have documented successful regeneration of such ridges. A study by Lang et al established that: 1. An undisturbed healing period of at least six months is required for optimal bone regeneration. 2. Smaller defects (less than 70 mm.3) regenerate almost completely. 3. Larger defects (greater than 90 mm.3) regenerate 90-93 percent and bone grafts may enhance success in larger defects. 4. Premature membrane removal will result in incomplete regeneration. Buser et al have described the technique of GBR in detail. They found the creation and maintenance of a secluded space is essential for successful outcome with GBR procedures. This space allows for the in growth of osteogenic cells so that bone regeneration is undisturbed by competing non-osteogenic soft tissue cells. Space-making defects such as extraction sockets are simple to treat, but localized ridge augmentation may be difficult because the membrane is not supported by bony walls. E-PTFE membranes have been reinforced with titanium struts and mini screws have been developed as a way of dealing with membrane collapse. Buser et al began to utilize autogenous bone grafts to support the membrane and to act as an osseoinductive scaffold for bone regeneration. They utilized a cortico-cancellous block graft in the centre of the augmentative area with smaller chips to fill in the periphery. The cortical portion of the graft re-establishes the buccal cortex and the cancellous portion is placed against the host bone. The host bone is perforated to open the marrow spaces. Placement of membrane protects the bone graft (up to 50 percent of grafted bone is lost through resorption in augmentation procedures where membrane is not used).     

Homogenized stress analysis in a dental implant system

In this study, the stress state occurring at each trabecular due to three different types of dental implant is investigated by a homogenization technique, in which the trabecular structure is assumed to be composed of repeating hexagonal units. This technique helps make a proper material model of bone and to analyse such a non-homogeneous structure at the level of an individual microstructural unit. Stress analyses with the homogenization technique show a much higher stress level in the sponge bone, compared to those with conventional FEM. It also shows that even a minor lateral force results in crucial stresses in the dental implant system. The stress states of the mandible with a hemisphere-rooted implant and a wedge type implant show similar levels, while those with a rectangular-rooted implant result in higher stresses. It is suggested that the distance between the implant tip and cortical bone be kept far enough apart to prevent stress concentrations in the mandible.     

Nerve degeneration within the dental pulp after segmental osteotomies in the baboon (Papio ursinus)

Following dentofacial surgical procedures, teeth in segments often do not sense thermal or electric stimuli. This study was undertaken to assess changes in the neural component of the dental pulp after posterior maxillary and mandibular segmental osteotomies, with or without interpositional autogenous bone grafting, in 26 Chacma baboons. Innervation was assessed histologically immediately after operation, and at 3, 6, 12 and 18 months. Statistically significant differences were present between the experimental and control groups. Even after 18 months no nerves were present in any of the mandibular teeth. In maxillary teeth, 50 per cent had demonstrable nerves in the graft group and 40 per cent in the no graft group. As nerve degeneration was present in the experimental teeth, patients should be warned of possible change in tooth sensibility, following these operations. Careful post-operative follow up for long periods in humans following dentofacial surgical procedures is thus essential.     

Osteo-conductive materials: animal experiments and instrumental analysis II

BACKGROUND: In daily dental surgery practice, when it is not possible to obtain-enough autogenous bone graft to fill bone defects, bone substitutes can be useful for bone regeneration. MATERIALS AND METHODS: After a preliminary microscopic examination of histologic samples obtained from semithin sections of the tibias of rats showing no major differences in the results both for the single material and implant time, further studies on five different osteoconductive materials used in oral clinical practice were carried out with microradiography, SEM and X-ray microanalysis. In experimental animals (rats) bone defects 3 mm large were surgically induced in both tibias: one of the defects was filled by bone substitutes and on the other side the bone defect healed naturally. RESULTS AND CONCLUSIONS: The findings obtained were studied in depth, and allowed to conclude that the materials tested are suitable for the purpose for which they are marketed. Non-demineralized bovine bone showed the best results with a high degree of osteointegration. However, the results also show that not all the materials tested offer healing advantages over controls.     

A computerized tomography (CT) scan appliance for optimal presurgical and preprosthetic planning of the implant patient

This article describes the technique for using the CT (computerized axial tomography) scans, with specially designed software and an adjunct appliance, for accurate planning of dental implants and implant-supported restorations. The available bone can be evaluated, surgical problems anticipated, and errors in placement avoided. The learning objective of this article is an enhanced knowledge of the extended application of the CT scans and the use of the orientation and immobilization appliance.