An ergonomics study of thumb movements on smartphone touch screen

This study investigated the relationships between thumb muscle activity and thumb operating tasks on a smartphone touch screen with one-hand posture. Six muscles in the right thumb and forearm were targeted in this study, namely adductor pollicis, flexor pollicis brevis, abductor pollicis brevis (APB), abductor pollicis longus, first dorsal interosseous (FDI) and extensor digitorum. The performance measures showed that the thumb developed fatigue rapidly when tapping on smaller buttons (diameter: 9 mm compared with 3 mm), and moved more slowly in flexion–extension than in adduction–abduction orientation. Meanwhile, the electromyography and perceived exertion values of FDI significantly increased in small button and flexion–extension tasks, while those of APB were greater in the adduction–abduction task. This study reveals that muscle effort among thumb muscles on a touch screen smartphone varies according to the task, and suggests that the use of small touch buttons should be minimised for better thumb performance.     

Effects of work surface height on muscle activity and posture of the upper extremity during simulated pipetting

In order to examine the effects of work surface height (WSH) on muscle activity, posture and discomfort during simulated pipetting, an experimental study was conducted using electromyography, electrogoniometry, video techniques and also qualitative data. The experimental design consisted of one independent variable (WSH with six heights) and 13 dependent variables. The levels of muscle strain and discomfort were significantly lower at the shoulder when the WSHs were low but thumb muscle activities and neck flexion levels were markedly higher at these WSHs compared to higher WSHs. To reduce shoulder strain, without raising thumb and neck strain beyond acceptable limits, the findings suggest that the height of a laboratory workbench should be at the level of the pipette tip when held in a standing position with the hand at elbow height. It was also found that pipetting should not be done in a seated posture.

Practitioner Summary: An experimental study was conducted to examine the effects of work surface height on upper extremity muscle activity, posture and discomfort during simulated pipetting. The findings suggest that the laboratory workbench height should be at the pipette-tip level when held in a standing position with the hand at elbow height.     

Forearm posture and grip effects during push and pull tasks

Direction of loading and performance of multiple tasks have been shown to elevate muscle activity in the upper extremity. The purpose of this study was to evaluate the effects of gripping on muscle activity and applied force during pushing and pulling tasks with three forearm postures. Twelve volunteers performed five hand-based tasks in supinated, neutral and pronated forearm postures with the elbow at 90° and upper arm vertical. All tasks were performed with the right (dominant) hand and included hand grip alone, push and pull with and without hand grip. Surface EMG from eight upper extremity muscles, hand grip force, tri-axial push and pull forces and wrist angles were recorded during the 10 s trials. The addition of a pull force to hand grip elevated activity in all forearm muscles (all p < 0.017). During all push with grip tasks, forearm extensor muscle activity tended to increase when compared with grip only while flexor activity tended to decrease. Forearm extensor muscle activity was higher with the forearm pronated compared with neutral and supinated postures during most isolated grip tasks and push or pull with grip tasks (all p < 0.017). When the grip dynamometer was rotated so that the push and pull forces could act to assist in creating grip force, forearm muscle activity generally decreased. These results provide strategies for reducing forearm muscle loading in the workplace.

Statement of Relevance: Tools and tasks designed to take advantage of coupling grip with push or pull actions may be beneficial in reducing stress and injury in the muscles of the forearm. These factors should be considered in assessing the workplace in terms of acute and cumulative loading.     

Laboratory work with automatic pipettes: a study on how pipetting affects the thumb

Abstract

The aim of this study was to assess the strain that is exerted on the thumb when working with automatic pipettes. The study consisted of three parts: a survey concerning stress-related symptoms in general and in the thumb in particlar, a study of the working conditions in the laboratory with the help of a video-film, and a power test. In the survey the Nordic Council of Ministers’ questionnaire and a newly developed questionnaire about the thumb were used. A usual and frequently carried out analysis that included several different methods of pipetting was filmed on video. The power test measured two things, the power that is necessary to press down the button of the pipette into different positions and the maximal strength when performing a movement in the same direction. It was shown that the strain on the thumb for a woman with weak muscular structures is unacceptably high. The symptoms increase with the amount of time spent with pipetting and with age. In addition, pipetting is done in a position where the thumb is not stable but nevertheless has to work to stabilize the grip around the pipette and to press down the button of the pipette. Therefore the muscles have to work both as mobilizing and stabilizing structures. It is concluded, therefore, that some form of automation ought to be taken into consideration if the amount of pipetting work tends to increase. The pipettes should be constructed with as little button resistance as possible and the handle should be designed to fit different hand sizes.     

Effects of arm support on shoulder and arm muscle activity during sedentary work

The aim of this study was to evaluate different arm supports by comparing the activity of shoulder and arm muscles during various work tasks, with and without the lower arm supported. Twelve female subjects, aged between 23 and 37 years, were asked to perform three types of tasks: typing, simulated assembly work (in two different positions), and pipetting. The supports used were: fixed arm support (FIX), horizontal movable arm support (HOR), and spring-loaded arm support (SLA). During the experiments, the electromyograms (EMG) of four muscles were simultaneously recorded: m. deltoideus anterior and lateralis, m. trapezius pars descendens and m. extensor carpi radialis brevis. Normalization was made against maximum isometric contraction. The mean values of the normalized EMG levels showed a reduced EMG level of the shoulder muscles when using arm supports in all the tasks, and for all muscles but the wrist extensor, compared to the EMG levels without arm supports. The horizontal movable support was more effective in reducing the EMG levels of the shoulder muscles than other arm supports, in tasks at table height. Thus, it is possible to reduce muscle activity of the shoulder region by using arm supports. Further research is needed to make biomechanical calculations to compare the EMG level of these muscles using suspension and the effects of inclination of work task.     

Field measurement of hand forces of palm oil harvesters and evaluating the risk of work-related musculoskeletal disorders (WMSDs) through biomechanical analysis

Hand force data is critical in evaluating work-related musculoskeletal disorders (WMSDs). Nevertheless, earlier studies on oil palm workers relied on estimated or laboratory measurements, which may not accurately reflect the actual hand forces. This study is the first report on the field measurement of hand forces for palm oil harvesters using a chisel and sickle to harvest low and tall palm trees, respectively. The dynamic hand forces and ground reaction forces were measured using instrumented harvesting tools and force plates, while wearable motion (IMU) and electromyography (EMG) sensors were incorporated for quantifying postural angles and muscle activations, respectively. Additionally, the spinal loadings, continuous Rapid Entire Body Assessment (REBA) scores, and subjective pain scores were determined to evaluate the risk of WMSDs. A total of 10 harvesters were recruited to perform the palm pruning tasks using a chisel and sickle. Resultantly, the sickle and chisel recorded a maximum cutting force of 1601.23 ± 424.26 N and 420.80 ± 96.00 N, respectively. All pruning tasks were found to be highly risky to harvesters, with a peak REBA score of 12. Likewise, all investigated muscles were activated for over 40% MVC, thus inducing moderate pain in the muscles. The peak L5-S1 compression forces for all tasks exceeded the safety threshold (>3400 N), but the values were not significantly different. The shear force of the L5-S1 was extreme in pruning with a sickle (1446.10 ± 411.00 N) compared to using a chisel. In conclusion, palm harvesters were at a high risk of developing WMSDs following poor postures, high physical exertion and muscle activity, and excessive spinal loads.     

Effects of antagonistic co-contraction on differences between electromyography based and optimization based estimates of spinal forces

Estimates of spinal forces are quite sensitive to model assumptions, especially regarding antagonistic co-contraction. Optimization based models predict co-contraction to be absent, while electromyography (EMG) based models take co-contraction into account, but usually assume equal activation of deep and superficial parts of a muscle. The aim of the present study was to compare EMG based and optimization based estimates of spinal forces in a wide range of work tasks. Data obtained from ten subjects performing a total of 28 tasks were analysed with an EMG driven model and three optimization models, which were specifically designed to test the effects of the above assumptions. Estimates of peak spinal forces obtained using the different modelling approaches were similar for total muscle force and its compression component (on average EMG based predictions were 5% higher) and were closely related (R > 0.92), while differences in predictions of the peak shear component of muscle force were more substantial (with up to 39% lower estimates in optimization based models, R > 0.79). The results show that neither neglecting antagonistic co-contraction, nor assuming equal activation of deep and superficial muscles, has a major effect on estimates of spinal forces. The disparity between shear force predictions was due to an overestimation of activity of the lateral part of the internal oblique muscle by the optimization models, which is explained by the cost function preferentially recruiting larger muscles. This suggests that a penalty for active muscle mass should be included in the cost function used for predicting trunk muscle recruitment.     

Effects of antagonistic co-contraction on differences between electromyography based and optimization based estimates of spinal forces

Estimates of spinal forces are quite sensitive to model assumptions, especially regarding antagonistic co-contraction. Optimization based models predict co-contraction to be absent, while electromyography (EMG) based models take co-contraction into account, but usually assume equal activation of deep and superficial parts of a muscle. The aim of the present study was to compare EMG based and optimization based estimates of spinal forces in a wide range of work tasks. Data obtained from ten subjects performing a total of 28 tasks were analysed with an EMG driven model and three optimization models, which were specifically designed to test the effects of the above assumptions. Estimates of peak spinal forces obtained using the different modelling approaches were similar for total muscle force and its compression component (on average EMG based predictions were 5% higher) and were closely related (R >?0.92), while differences in predictions of the peak shear component of muscle force were more substantial (with up to 39% lower estimates in optimization based models, R >?0.79). The results show that neither neglecting antagonistic co-contraction, nor assuming equal activation of deep and superficial muscles, has a major effect on estimates of spinal forces. The disparity between shear force predictions was due to an overestimation of activity of the lateral part of the internal oblique muscle by the optimization models, which is explained by the cost function preferentially recruiting larger muscles. This suggests that a penalty for active muscle mass should be included in the cost function used for predicting trunk muscle recruitment.     

Muscle response to pneumatic hand tool torque reaction forces

Surface electromyography was used for studying the effects of torque reaction force acting against the hand, on forearm muscle activity and grip force for five subjects operating right angle, air shut-off nutrunners. Four tools having increasing spindle torque were operated using short and long torque reaction times. Nutrunner spindle torque ranged between 30 Nm and 100 Nm. Short torque reaction time was considered 0.5 s while long torque reaction time was 2 s. Peak horizontal force was the greatest component of the reaction force acting against the hand and accounted for more than 97% of the peak resultant hand force. Peak hand force increased from 89 N for the smallest tool to 202 N for the largest tool. Forearm muscle rms EMG, scaled for grip force, indicated average flexor activity during the Torque-reaction phase was more than four times greater than the Pre-start and Post Shut-off phases, and two times greater than the Run-down phase. Flexor EMG activity during the Torque-reaction phase increased for increasing tool peak spindle torque. Average flexor rms EMG activity, scaled for grip force, during the Torque-reaction phase increased from 372 N for the 30 Nm nutrunner to 449 N for the 100 Nm nutrunner. Flexor rms EMG activity averaged during the Torque-reaction phase and scaled for grip force was 390 N for long torque reaction times and increased to 440 N for short torque reaction times. Flexor rms EMG integrated over the torque reaction phase was 839 Ns for long torque reaction times and decreased to 312 Ns for short torque reaction times. The average latency between tool spindle torque onset and peak initial flexor rms EMG for long torque reaction times was 294 ms which decreased to 161 ms for short torque reaction times. The average latency between peak tool spindle torque, just prior to tool shut-off, and peak final rms EMG for long torque reaction times was 97 ms for flexors and 188 ms for extensors, which decreased for short torque reaction times to 47 ms for flexors and 116 ms for extensors. The results suggest that right angle nutrunner torque reaction forces can affect extrinsic hand muscles in the forearm, and hence grip exertions, by way of a reflex response.(ABSTRACT TRUNCATED AT 400 WORDS)     

A comparison of muscle activity in using touchscreen smartphone among young people with and without chronic neck–shoulder pain

This study aimed to examine differences in muscle activity between young people with and without neck–shoulder pain (n = 20 in each group), when they performed texting on a smartphone. Texting was compared between using both hands (‘bilateral texting’) and with only one hand (‘unilateral texting’). Texting tasks were also compared with computer typing. Surface electromyography from three proximal postural muscles and four distal hand/thumb muscles on the right side was recorded. Compared with healthy controls, young people with neck–shoulder pain showed altered motor control consisting of higher muscle activity in the cervical erector spinae and upper trapezius when performing texting and typing tasks. Generally, unilateral texting was associated with higher muscle loading compared with bilateral texting especially in the forearm muscles. Compared with computer typing, smartphone texting was associated with higher activity in neck extensor and thumb muscles but lower activity in upper and lower trapezius as well as wrist extensors.     

Different computer tasks affect the exposure of the upper extremity to biomechanical risk factors

In order to determine differences in biomechanical risk factors across computer tasks, a repeated measures laboratory experiment was completed with 30 touch-typing adults (15 females and 15 males). The participants completed five different computer tasks: typing text, completing an html-based form with text fields, editing text within a document, sorting and resizing objects in a graphics task and browsing and navigating a series of intranet web pages. Electrogoniometers and inclinometers measured wrist and upper arm postures, surface electromyography measured muscle activity of four forearm muscles and three shoulder muscles and a force platform under the keyboard and force-sensing computer mouse measured applied forces. Keyboard-intensive tasks were associated with less neutral wrist postures, larger wrist velocities and accelerations and larger dynamic forearm muscle activity. Mouse-intensive tasks (graphics and intranet web page browsing) were associated with less neutral shoulder postures and less variability in forearm muscle activity. Tasks containing a mixture of mouse and keyboard use (form completion and text editing) were associated with higher shoulder muscle activity, larger range of motion and larger velocities and accelerations of the upper arm. Comparing different types of computer work demonstrates that mouse use is prevalent in most computer tasks and is associated with more constrained and non-neutral postures of the wrist and shoulder compared to keyboarding.     

Different computer tasks affect the exposure of the upper extremity to biomechanical risk factors

In order to determine differences in biomechanical risk factors across computer tasks, a repeated measures laboratory experiment was completed with 30 touch-typing adults (15 females and 15 males). The participants completed five different computer tasks: typing text, completing an html-based form with text fields, editing text within a document, sorting and resizing objects in a graphics task and browsing and navigating a series of intranet web pages. Electrogoniometers and inclinometers measured wrist and upper arm postures, surface electromyography measured muscle activity of four forearm muscles and three shoulder muscles and a force platform under the keyboard and force-sensing computer mouse measured applied forces. Keyboard-intensive tasks were associated with less neutral wrist postures, larger wrist velocities and accelerations and larger dynamic forearm muscle activity. Mouse-intensive tasks (graphics and intranet web page browsing) were associated with less neutral shoulder postures and less variability in forearm muscle activity. Tasks containing a mixture of mouse and keyboard use (form completion and text editing) were associated with higher shoulder muscle activity, larger range of motion and larger velocities and accelerations of the upper arm. Comparing different types of computer work demonstrates that mouse use is prevalent in most computer tasks and is associated with more constrained and non-neutral postures of the wrist and shoulder compared to keyboarding.     

The effect of typing posture on wrist extensor muscle loading

High static loading of the forearm extensor musculature has been observed during keying tasks. To reduce the level of loading, one must first understand the contributing factors. A simulation of the human finger was used to determine muscle force contributions during a static index finger key press at several wrist postures. The planar model included active and passive muscle forces of the intrinsic and extrinsic finger muscles. The model was expanded to include the passive forces from the other fingers as well as the weight of the hand to determine the exertion required of the wrist extensor muscles to maintain the given wrist and finger postures. Model results indicated that greater than 25% of maximal exertion is required of the wrist extensors when the wrist is extended to 30. The increased moment contribution from passive forces of the extrinsic finger flexor muscles was responsible for the majority of the increased wrist extensor contribution as the wrist was extended. These findings are in relative agreement with previous electromyographic studies and may indicate a mechanism for forearm extensor pain in office workers. Potential applications of this research include ergonomic modeling of the upper limb to determine internal loads that may lead to work-related disorders.     

The size and structure of arm movement variability decreased with work pace in a standardised repetitive precision task

Increased movement variability has been suggested to reduce the risk of developing musculoskeletal disorders caused by repetitive work. This study investigated the effects of work pace on arm movement variability in a standardised repetitive pipetting task performed by 35 healthy women. During pipetting at slow and fast paces differing by 15%, movements of arm, hand and pipette were tracked in 3D, and used to derive shoulder and elbow joint angles. The size of cycle-to-cycle motor variability was quantified using standard deviations of several kinematics properties, while the structure of variability was quantified using indices of sample entropy and recurrence quantification analysis. When pace increased, both the size and structure of motor variability in the shoulder and elbow decreased. These results suggest that motor variability drops when repetitive movements are performed at increased paces, which may in the long run lead to undesirable outcomes such as muscle fatigue or overuse.     

Peak activation of lower limb musculature during high flexion kneeling and transitional movements

Few studies have measured lower limb muscle activation during high knee flexion or investigated the effects of occupational safety footwear. Therefore, our understanding of injury and disease mechanisms, such as knee osteoarthritis, is limited for these high-risk postures. Peak activation was assessed in eight bilateral lower limb muscles for twelve male participants, while shod or barefoot. Transitions between standing and kneeling had peak quadriceps and tibialis anterior (TA) activations above 50% MVC. Static kneeling and simulated tasks performed when kneeling had peak TA activity above 15% MVC but below 10% MVC for remaining muscles. In three cases, peak muscle activity was significantly higher (mean 8.9% MVC) when shod. However, net compressive knee joint forces may not be significantly increased when shod. EMG should be used as a modelling input when estimating joint contact forces for these postures, considering the activation levels in the hamstrings and quadriceps muscles during transitions.

Practitioner Summary: Kneeling transitional movements are used in activities of daily living and work but are linked to increased knee osteoarthritis risk. We found peak EMG activity of some lower limb muscles to be over 70% MVC during transitions and minimal influence of wearing safety footwear.     

基于小波变换和样本熵的假手肌电模式识别方法

提出一种新的模式分类器,利用安置在拇长屈肌、指深屈肌和指伸肌上的3个电极所测得的肌电信号,实现了对3自由度假手手指运动的控制．该分类器采用小波变换和样本熵的方法构造特征矢量．经过由变学习速率算法和RP算法构建的集成3层前馈神经网络的分类,能够成功地分辨出拇指、食指和中指的弯曲与伸展运动,平均识别率可达96％以上．实验结果表明,该分类器为多自由度肌电假手的控制提供了一种有效的方法．     

Inward torque and high-friction handles can reduce required muscle efforts for torque generation

OBJECTIVE: The effects of handle friction and torque direction on muscle activity and torque are empirically investigated using cylindrical handles. BACKGROUND: A torque biomechanical model that considers contact force, friction, and torque direction was evaluated using different friction handles. METHODS: Twelve adults exerted hand torque in opposite directions about the long axis of a cylinder covered with aluminum or rubber while grip force, torque, and finger flexor electromyography (EMG) were recorded. In addition, participants performed grip exertions without torque, in which they matched the EMG level obtained during previous maximum torque exertions, to allow us to determine how grip force was affected by the absence of torque. RESULTS: (a) Maximum torque was 52% greater for the high-friction rubber handle than for the low-friction aluminum handle. (b) Total normal force increased 33% with inward torque (torque applied in the direction fingertips point) and decreased 14% with outward torque (torque in the direction the thumb points), compared with that with no torque. Consequently, maximum inward torque was 45% greater than maximum outward torque. (c) The effect of torque direction was greater for the high-friction rubber handle than for the low-friction aluminum handle. CONCLUSION: The results support the proposed model, which predicts a large effect of torque direction when high-friction handles are gripped. APPLICATION: Designing tasks with high friction and inward rotations can increase the torque capability of workers of a given strength, or reduce required muscle activities for given torque exertions, thus reducing the risk of fatigue and musculoskeletal disorders.     

Evaluation of a dynamic arm support for seated and standing tasks: a laboratory study of electromyography and subjective feedback

The goal of this study was to determine whether a new dynamic arm support system reduced shoulder and arm muscle load for seated and standing hand/ arm tasks. The new system provides support for both horizontal and vertical arm motion. A total of 11 participants performed ten tasks (five seated and five standing) both with and without the arm support. Outcomes were assessed with electromyography and subjective feedback. Muscle activity was measured over the dominant side supraspinatus, triceps and forearm extensor muscles. Significant (p < 0.01) reductions in static muscle activity were observed in one of ten tasks performed with the support device for the supraspinatus muscle, in five tasks for the triceps and in one task for forearm extensor muscles. Likewise, a significant improvement in subjective measures was reported with the support device for 'ease of task' for two of ten tasks, for 'forearm comfort' for three of ten tasks and for 'shoulder effort' for six of ten tasks. The results suggest that a dynamic forearm support may improve subjective comfort and reduce static muscle loads in the upper extremity for tasks that involve horizontal movement of the arms. For rapid motions, the value of the support is limited due to internal inertia and friction.     

Insertion loads and forearm muscle activity during flexible hose insertion tasks

OBJECTIVE: To quantify the physical demands of hose insertion tasks in automotive assembly operations and how they are affected by method and the mechanical interference between the hose and the flange. BACKGROUND: Insertion tasks were identified by workers as physically demanding and can often lead to fatigue or losses in production attributable to pain or injury. METHODS: Six male and 6 female participants pushed a 25.4-mm flexible rubber hose onto a stationary flange during simulated insertions. Three insertion methods -- rock, straight, and twist -- were examined in the study. Muscle activity of the finger flexors was recorded to estimate grip effort during the simulated insertions. RESULTS: The twist method (114.8 N) resulted in a 26% reduction in axial force compared with the straight method (155.7 N). Average muscle activity ranged from a low of 14% maximum voluntary contraction (MVC; men, straight method) to a high of 67% MVC (women, twist method). Hose resultant forces ranged from a low of 52.2 N to a high of 461.1 N for all participants. Men exerted 6% higher resultant forces with 37% less muscle activity than women. CONCLUSION: There are situations when the 26% reduction in the axial force attributable to twisting may be helpful during an insertion, despite the fact that forearm muscle activity was highest for both male and female participants during twisting insertions. APPLICATION: The results of this study can be applied to the future design of tasks that involve the joining of two parts such as a hose and flange.     

Evaluation of a dynamic arm support for seated and standing tasks: a laboratory study of electromyography and subjective feedback

The goal of this study was to determine whether a new dynamic arm support system reduced shoulder and arm muscle load for seated and standing hand/arm tasks. The new system provides support for both horizontal and vertical arm motion. A total of 11 participants performed ten tasks (five seated and five standing) both with and without the arm support. Outcomes were assessed with electromyography and subjective feedback. Muscle activity was measured over the dominant side supraspinatus, triceps and forearm extensor muscles. Significant (p < 0.01) reductions in static muscle activity were observed in one of ten tasks performed with the support device for the supraspinatus muscle, in five tasks for the triceps and in one task for forearm extensor muscles. Likewise, a significant improvement in subjective measures was reported with the support device for ‘ease of task’ for two of ten tasks, for ‘forearm comfort’ for three of ten tasks and for ‘shoulder effort’ for six of ten tasks. The results suggest that a dynamic forearm support may improve subjective comfort and reduce static muscle loads in the upper extremity for tasks that involve horizontal movement of the arms. For rapid motions, the value of the support is limited due to internal inertia and friction.