共查询到20条相似文献,搜索用时 106 毫秒
1.
2.
李运华 《中国新技术新产品》2009,(3)
造成楼板质量不合格的主要原因有:钢筋强度不足、混凝土强度不足和对钢筋预应力把握不准;其次要原因是剪筋放张过早、隔离剂污染钢筋、拌和用水受到污染、楼板堆放不规则、标识混乱。 相似文献
3.
4.
本文结合实际谈了军工企业预防不合格测量设备质量风险的途径。重点从两个方面开展预防工作,一是加强测量设备的控制,实施周期计量确认,结合实际情况开展期间核查,开展测量系统的分析和评价,做到及时发现不合格测量设备;另一方面,在对不合格测量设备的处置上,采用标识管理或隔离处理,防止误用,对其测量的有效性进行分析评价,必要时进行追溯。针对测量设备测量有效性评价工作存在的问题进行分析,提出具体的改进措施。 相似文献
5.
林星友 《中国新技术新产品》2015,(3):110
混凝土工程是建筑施工中的重点工程,需要设计、材料、施工、检测等各个单位共同合作的一个系统工程。目前商品混凝土是整个建筑行业产品主流,越来越多的商品混凝土生产企业应运而生,然而其质量却受多方因素影响,难以保证,本文通过多年现场工作经验,总结出一些导致商品混凝土强度不合格的原因,望能给大家提供一些参考。 相似文献
6.
7.
8.
近日,北京市有关部门发布消息称,捷安特、飞鸽、永久等6个公司的7款自行车质量不合格,主要不合格项目包括链罩、说明书、突出物、把立管、侧反射器、前反射器、鸣号装置。据了解,捷安特(中国)有限公司一款TREK牌自行车链罩不合格。天津飞踏自行车有限公司的两款捷马牌自行车分别被查出前反射器和 相似文献
9.
就某工程外墙面砖拉拔强度检测不合格,从材料及施工原因进行分析,并对此进行总结,避免类似情况重现。 相似文献
10.
不合格测量设备的处置是测量设备确认体系要素之一,在贯标中应建立相应的不合格测量设备处置管理程序,以实现对不合格测量设备进行有效的控制。 相似文献
11.
12.
大机组供热改造后,2台及以上机组并列切换过程中,易出现1台机组真空快速降低的现象,本文主要分析了供热切换过程中机组真空快速降低的原因及空气来源,然后依据此原因制定了供热备用期间及投停过程中的防范措施. 相似文献
13.
14.
15.
本文分析一侧部分受液体作用悬臂梁的自振特性,利用三角函数数列的正交完备性,导出了该悬臂梁的振型函数和频率方程.最后给出了一些数值计算结果. 相似文献
16.
空间飞行任务中人的失误及其控制对策的研究 总被引:1,自引:0,他引:1
航天员已经在整个载人航天器系统中发挥出越来越重要的作用,同时,对其操作失误问题的关注也日见突出。文章详细分析了人的失误特点、理论研究及控制对策,在此基础上,指出对人的失误及可靠性研究在未来主要的发展方向与手段。最后,认为必须从人、机、环境三个方面进行综合考虑才能防止航天员的失误,从而提高其作业的可靠性。 相似文献
17.
混凝土结构工程的裂缝,是一个带有普遍性被全社会很为关注的问题。针对混凝土裂缝问题,从收缩变形裂缝、温度变化裂缝和地基不均匀沉降裂缝等方面,就其形成的原因进行了分析,并提出了预防裂缝产生的有效措施。 相似文献
18.
19.
The formation mechanism of chunky graphite has been reviewed and studied. The study consisted of a unidirectional solidification method, a small droplet method and a furnace cooling method. Four kinds of iron samples were prepared, namely, the pure Fe-C, Fe-C-S, Fe-C-Ce and Fe-C-Si-Ce alloys, and three kinds of nickel samples, namely the Ni-C, Ni-C-S and Ni-C-Mg alloys. The results of the unidirectional solidification of the Ni-C alloys showed that spheroidal graphite is not observed in the continuous solidified region, in which only flake-like graphite is observed, while spheroidal graphite is usually observed in the quenched liquid region. The existence of spheroidal graphite in the solidified phase is recognized only in the discontinuous growth mode of the Ni-C-Mg alloy solidified at 150 mm/h. This means that the spheroidal graphite is directly crystallized from the melt and entrapped by the flake-like chunky graphite that is formed by the continuous growth mode. In the small droplet method, a small piece of the Fe-C or Fe-C-Ce sample was melted on a pure graphite plate then cooled at a different cooling rate in a He-3%H2 atmosphere. The graphite in the Fe-C-Ce alloy is usually spherical. Nevertheless, the graphite morphology of the final solidified area changed from spherical to chunky and chunky to ledeburite with an increase in the cooling rate. This means that the chunky graphite is formed in the residual liquid region by the solidification into Fe-graphite system. The sample was cooled in a furnace, and the graphite morphology changes from spherical to chunky and chunky to ledeburite with the decrease in the Si content. These phenomena can be confirmed by the cooling curves of these samples. 相似文献
20.