IEC SC65C/MT9/HA高可用性自动化网络工作组会议(美国)纪要

2005年11月30日～12月2日，SC65C／MT9／HA“高可用性自动化网络”工作组会议在美国菲尼克斯召开。MT9／HA于2005年9月成立，主要致力于研究使用冗余技术设计基于以太网的高可用性自动化网络标准。标准将定义拓扑、网络和定时参数规范，以及基于环型拓扑的高可用性自动化网络通信协议。     

IEC/SC65C/MT9/HA高可用自动化网络工作组(德国)会议纪要

2007年10月22日～10月26日，IECSC65C／MT9／HA“高可用性自动化网络”第七次工作组会议在德国Metmngen召开。MT9／HA于2005年9月成立，主要致力于研究使用冗余技术设计基于以太网的高可用性自动化网络标准IEC62439。     

2006年《仪器仪表标准化与计量》总目录

行业动态行业资讯…………………………………………………(01～06-Ⅰ)官方发布2006年机械工业标准化工作要点……………………………………………………………(03-1)TC124专栏第三届全国工业过程测量和控制标准化技术委员会及工业通信(现场总线)及系统分技术委员会第四次全体委员会议纪要……………………………………………………………(06-1)国际标准化IECSC65C/MT9/HA高可用性自动化网络工作组会议(美国)纪要……………………………………………………………(01-1)IECSC65C/MT9、WG11现场总线及实时以太网工作组会议(美国)纪要…     

国家标准GB/T19852-2008《基于Modbus协议的工业自动化网络规范》发布会在京举行

“全国工业过程测量和控制标准化技术委员会（SAC／TCl24）”于2008年4月9日上午,在北京钓鱼台国宾馆举行了“国家标准GB／T19582—2008《基于Modbus协议的工业自动化网络规范》”发布会。     

推荐性国家标准GB／T25105．2014《工业通信网络现场总线规范类型10：PROFINETIO规范》（三个部分）发布暨报告会

全国工业过程测量控制和自动化标准．化技术委员会（SAC／TC124）秘书处于2014年9月16日上午,在北京钓鱼台国宾馆举行了“推荐性国家标准GB／T25105-2014《工业通信网络现场总线规范类型1O：PROFINETIO规范》（三个部分）发布暨报告会。     

国家标准GB／T19582-2008《基于Modbus协议的工业自动化网络规范》发布会

全国工业过程测量和控制标准化技术委员会（SAC／TC124）于2008年4月9日上午．在北京钓鱼台国宾馆举行了“国家标准GB／T19582—2008《基于Modbus协议的工业自动化网络规范》”发布会。会间,国家标准化管理委员会工业二部戴红副主任到会阐述了我国制订国家标准的战略和采用国际标准的方针与原则．同时宣布了国家标准发布2008年第3号公告《基于Modbus协议的工业自动化网络规范》正式成为国家标准．     

国家标准化指导性技术文件GB／Z29496．1-.3-2013《控制与通信网络CC-Link Safety规范（三个部分）》正式发布

2013年5月8日上午，在北京钓鱼台国宾馆召开了国家标准化指导性技术文件GB／Z29496．1～．3-2013《控制与通信网络CC-Link Safety规范（三个部分）》发布暨报告会。国家标准化管理委员会工业二部领导到会并讲话，指出《控制与通信网络CC—Link Safety规范》三个部分国家标准的制定和发布，可以更好地规范和指导开发、制造和应用单位掌握和运用该项技术，促进我国工业自动化技术的跨越式发展，     

A6VM/60系列斜轴式变量柱塞马达如期通过部级鉴定

上海液压泵厂在引进德国海卓玛蒂公司制造技术基础上，于91年承担了“八五”重点企业技术开发项目──A6VM／60系列科轴式变量柱塞马达的新产品研制下，开发小批产的任务。在北京自动化所协作下经三年九个月的辛勤耕耘，从设计、工艺、工装、试制、试验和成功地研制出了A6VM／60系列外轴式变量柱塞马达等五种规格的产品：A6VM55HA2／60、A6VM80HA2／60、A6VM80HD／60、A6VM107EZ／60、A6VM107HA／60，并于95年10月9日在上海液压泵厂通过部级鉴定。代表产品A6VM80HA／60的性能参数为：排量80ml／r，转速1800～3000r／min，压…     

HBES标准对楼宇自动化的影响及其未来的发展趋势

介绍GB／Z20965-2007《控制网络HBES技术规范——住宅和楼宇控制系统》的标准化过程及其主要内容,并分析说明该标准对楼宇自动化产业各方面的影响及其未来发展方向。     

IEC／SC65C／MT9＆WG11工作组会议纪要

2007年1月21日～29日，IEC／SC65C／MT9与WG11联合工作组会议在法国Pauilac小镇召开，来自24个总线开发公司和组织的32名专家参加了本次会议。     

Electron and light microscopy studies on the domain structures of Zn3B7O13Cl, Zn3B7O13Br and Zn3B7O13I ferroic boracites

The domain structures of Zn₃B₇O₁₃Cl, Zn₃B₇O₁₃Br and Zn₃B₇O₁₃I boracite single crystals were studied by means of polarized light in conjunction with electron microscopy. Single crystals of the three compositions were grown by chemical transport reactions in closed quartz ampoules, at a temperature of 900 °C and were examined by polarizing optical microscopy (PLM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). For both PLM and SEM, the same as‐grown samples were used without having to resort to metallization of the crystal faces. For TEM the single crystals were crushed and mounted on holey carbon films. Comparative electron microscope images were useful for revealing the domain structure of these ferroelectric/ferroelastic materials previously observed between the crossed polars of an optical microscope. X‐ray diffraction analysis of the pulverized crystals was performed for this triad of halogen boracites containing zinc as a common metal.     

Cylindrical specimens for KIC of rocks

Stress intensity factors for pairs of diametrically opposite radial cracks on the inside of a jacketed pressurized hole in a thick cylinder have been calculated by using finite element technique. Burst tests on thick cylinder rock samples under above conditions have been performed and the K_IC values for Antrim Shale and Limestone determined. The method is very convenient for rocks whose samples are often available in form of cylindrical bars drawn as cores from underground drilling.     

GT/CAD/CAPP/PDM/ERP系统集成研究

研究ETO生产方式下以成组技术为基础的CAD/CAPP/PDM/ERP的集成方法,包括面向CAD/CAPP/PDM/ERP的集成的成组信息编码,基于成组编码的CAD/PDM集成、CAPP/PDM集成和PDM/ERP集成.提出了基于成组技术的CAD/CAPP/PDM/ERP集成框架,研究了贯穿于CAD、CAPP、PDM与ERP系统的统一的成组编码方案和信息编码方案.     

基于太赫兹光谱的人参和西洋参鉴别

为了快速区分人参和西洋参,依据两者所含的人参皂苷在太赫兹波段具有不同指纹光谱,提出了一种基于人参皂苷的太赫兹光谱鉴别人参和西洋参的方法。采用MATLAB软件识别人参和西洋参的太赫兹光谱,同时根据太赫兹光谱特征并通过标准的主成分分析(PCA)区分出人参、西洋参。实验结果表明,基于太赫兹光谱的主成分分析可精确区分出人参、西洋参,并且还可以应用于其他类似物质的区分中。     

Analysis of the Rk surface roughness parameter proposals

European manufacturers have proposed a set of surface roughness parameters based on an examination of the variation in slope of the bearing ratio curve of a surface profile. It is shown, that the proposed procedure provides no useful information, and indeed is misleading, since the bearing ratio curve of even a normally-distributed random surface profile exhibits the expected variation in slope when plotted on rectangular coordinates. On the other hand, the desired information is readily obtained by a similar examination of the cumulative height distribution of a surface profile (the unity complement of the bearing ratio) when it is plotted on normal probability coordinates.     

永磁同步电机积分滑模观测器控制

对永磁同步电机观测器控制进行研究,针对传统滑模观测器存在控制精度低、系统抖振较大的不足,设计了一种永磁同步电机积分滑模观测器控制。积分滑模控制具有控制精度高、系统抖振小的特点。积分滑模观测器可以有效提高电机控制精度,增强控制系统抗干扰能力。采用饱和函数代替符号函数进行滑模控制律设计,降低控制系统固有抖振,使滑模控制动态性能提高。通过仿真验证了积分滑模观测器控制策略的可行性。     

Characterization of cast Al86Mn3Be11 alloy

An Al₈₆Mn₃Be₁₁ alloy cast into copper mould was subjected to metallographic investigation. The as-cast microstructure consisted of a quasicrystalline icosahedral phase (i-phase), Be₄AlMn phase and, occasionally, a hexagonal phase. Al-rich solid solution represented the dominant phase. The chemical compositions of phases were determined using AES. The composition of the Be₄AlMn slightly deviated from the stoichiometric composition, whereas the composition of the i-phase was approximately Al₅₂Mn₁₈Be₃₀, containing an appreciable amount of Be. The average composition of the hexagonal phase was Al₆₆Mn₂₁Be₁₃. Deep etching and particle extraction provided a deep insight into the three-dimensional morphology of the i-phase and the hexagonal phase, whereas Be₄AlMn was slightly attacked by the etchant. The i-phase was present predominantly in the form of dendrites and a rodlike eutectic phase. The hexagonal phase was primarily in the form of hexagonal platelets, whereas Be₄AlMn was rather irregular in shape. The morphology of the i-phase can be explained by predominant growth in 3-fold directions and the lowest energy of the 5-fold planes, leading to the faceting and adopting a pentagonal dodecahedron shape. The brightnesses of phases in the backscattered electron images were rationalized by determining their backscattering coefficients. TEM investigation showed considerable phason strain in the i-phase, and the polycrystalline nature of the Be₄AlMn phase.     

Investigation on the impact behavior of Al2O3-SiC-MgO nanoceramic/metal laminated composite

Lightweight laminated composites containing a ceramic front layer and a metallic backing layer were used in order to protect people, moving equipment, and mobile vehicles from high velocity impact and the increased mobility of mobile vehicles. In this study, by adding10 vol% SiC and 500 ppm MgO nanoscale particles on the microstructure of Al ₂ O ₃ matrix and applying optimum sintering conditions, ceramic performance against high-speed projectile impact was improved. To perform this investigation, a number of target samples with two different types of front layers (alumina and Al ₂ O ₃-SiC-MgO nanocomposite ceramic) were produced. Impact tests were conducted on these samples using 7.62 mm projectiles with a velocity of 820 ± 15 m/s. The amount of bulge and bending of the backing layer caused by impact tests was measured. The results of the impact tests on the samples made of Al ₂ O ₃-SiC-MgO nanocomposite ceramics and alumina were also compared and analyzed. The results indicate that the substitution of Al ₂ O ₃-SiC-MgO ceramic layer — which is proffered in this paper — instead of pure alumina ceramic layer, decreases the areal-density of the samples by at least 30% and improves mechanical properties by about a 60% increase in flexural strength and 100% growth of the energy distribution factor, which impressively increases impact energy absorption.     

Electron microscopy of crack/particle interactions in Al2O3/SiC nanocomposites

Crack/particle interactions in alumina/silicon carbide nanocomposites have been investigated by scanning electron microscopy and transmission electron microscopy, with cracks induced by Vickers microindentation. Intergranular cracks are frequently deflected into grains by SiC particles on grain boundaries inclined to the average direction of crack propagation. This mechanism is proposed to explain the change in the fracture mode from intergranular fracture for monolithic alumina to predominantly transgranular fracture for the nanocomposites. Neither stress-induced microcracking around SiC particles nor significant crack deflection by intragranular particles was found to occur in the nanocomposites. It is argued that an addition of nanoparticles may not be a promising approach for increasing the toughness of alumina.     

Near-field second harmonic imaging of the c/a/c/a polydomain structure of epitaxial PbZrxTi1–xO3 thin films

Near-field optical second harmonic microscopy has been applied to imaging of the c/a/c/a polydomain structure of epitaxial PbZr _x Ti_{1– x} O₃ thin films in the 0 <  x  < 0.4 range. Comparison of the near-field optical images and the results of atomic force microscopy and X-ray diffraction studies show that an optical resolution of the order of 100 nm is achieved. Symmetry properties of the near-field second harmonic signal allow us to obtain good optical contrast between the local second harmonic generation in c- and a-domains. Experimentally measured near-field second harmonic images have been compared with the results of theoretical calculations. Good agreement between theory and experiment is demonstrated.