Assessing relationships among properties of demolished concrete, recycled aggregate and recycled aggregate concrete using regression analysis

Recycled demolished concrete (DC) as recycled aggregate (RA) and recycled aggregate concrete (RAC) is generally suitable for most construction applications. Low-grade applications, including sub-base and roadwork, have been implemented in many countries; however, higher-grade activities are rarely considered. This paper examines relationships among DC characteristics, properties of their RA and strength of their RAC using regression analysis. Ten samples collected from demolition sites are examined. The results show strong correlation among the DC samples, properties of RA and RAC. It should be highlighted that inferior quality of DC will lower the quality of RA and thus their RAC. Prediction of RAC strength is also formulated from the DC characteristics and the RA properties. From that, the RAC performance from DC and RA can be estimated. In addition, RAC design requirements can also be developed at the initial stage of concrete demolition. Recommendations are also given to improve the future concreting practice.     

Residue strength,water absorption and pore size distributions of recycled aggregate concrete after exposure to elevated temperatures

In this paper, the effects of high temperature exposure of recycled aggregate concretes in terms of residual strengths, capillary water absorption capacity and pore size distribution are discussed. Two mineral admixtures, fly ash (FA) and ground granulated blast furnace (GGBS) were used in the experiment to partially replace ordinary Portland cement for concrete production. The water to cementitious materials ratio was maintained at 0.50 for all the concrete mixes. The replacement levels of natural aggregates by recycled aggregates were at 0%, 50% and 100%. The concretes were exposed separately to 300 °C, 500 °C and 800 °C, and the compressive and splitting tensile strength, capillary water coefficient, porosity and pore size distribution were determined before and after the exposure to the high temperatures. The results show that the concretes made with recycled aggregates suffered less deteriorations in mechanical and durability properties than the concrete made with natural aggregates after the high temperature exposures.     

Durability of recycled aggregate concrete prepared with carbonated recycled concrete aggregates

The mechanical properties of recycled aggregate concrete (RAC) incorporating carbonated recycled concrete aggregates (RCAs) have previously been reported. However, the durability of RAC prepared with carbonated RCAs remains to be accessed. In this study, the durability properties of RAC prepared with non-carbonated RCAs and carbonated RCAs, in terms of deformation (drying shrinkage), water absorption and permeability (bulk electrical conductivity, gas and chloride ion permeability), are presented. The experimental results indicated that: (i) the incorporation of the carbonated RCAs in RAC not only helped to reduce the water absorption of RAC, but also reduced its permeability; (ii) when 100% carbonated NRCAs was used, the improvement extent of impermeability was 15.1%, 36.4% and 42.4% for bulk electrical conductivity, chloride ion permeability and gas permeability, respectively. Comparing the results of the mechanical and durability properties, the CO₂ curing treatment of RCAs had a greater beneficial impact on the durability properties of the RAC; and (iii) there was a good correlation between the water absorption of RAC and its permeability indicators. The water absorption value of RAC may be used as a criterion of the durability of RAC.     

Tension stiffening approach for interface characterization in recycled aggregate concrete

This study proposes a comprehensive analysis on the structural performance of reinforced Recycled Aggregate Concrete members. Particularly, it summarizes the results of an experimental investigation aimed at analyzing the tension stiffening behavior of normal and high strength class concretes produced with Recycled Concrete Aggregates (RCAs). The mixtures were proportioned in order to achieve 25 and 65 MPa of compressive strength and, moreover, several recycled-to-natural coarse aggregates replacement ratios were considered: 0%, 25% and 50%. The results derived from this type of test furnish a comprehensive analysis on both the steel-to-matrix interaction and the crack formation and propagation on concrete elements as well as distributed cracking mechanisms. Using a finite difference numerical model, the experimental results are used to back-calculate and identify the steel-to-concrete bond slip law. Also, it is an alternative mean of developing the stress-crack-width law for concrete in tension. The results showed that the use of recycled concrete aggregate does not affect the resulting concrete performance and, therefore, the RCAs can be successfully employed, up to the levels analyzed herein, for the production of structural elements made with normal and high strength class concrete mix.     

Influence of steam curing on the pore structures and mechanical properties of fly-ash high performance concrete prepared with recycled aggregates

In this research work, High Performance Concrete (HPC) was produced employing 30% of fly ash and 70% of Portland cement as binder materials. Three types of coarse recycled concrete aggregates (RCA) sourced from medium to high strength concretes were employed as 100% replacement of natural aggregates for recycled aggregate concrete (RAC) production. The specimens of four types of concretes (natural aggregate concrete (NAC) and three RACs) were subjected to initial steam curing besides the conventional curing process. The use of high quality RCA (>100 MPa) in HPC produced RAC with similar or improved pore structures, compressive and splitting tensile strengths, and modulus of elasticity to those of NAC. It was determined that the mechanical and physical behaviour of HPC decreased with the reduction of RCA quality. Nonetheless steam-cured RACs had greater reductions of porosity up to 90 days than NAC, which led to lower capillary pore volume.     

Evaluation of the bond behavior of steel reinforcing bars in recycled fine aggregate concrete

This paper describes pullout test results on deformed reinforcing bars in natural and recycled fine aggregate (RFA) concrete. The effects of bar location and RFA grade on bond strength between reinforcing bar and recycled aggregate concrete (RAC) were evaluated through the experimental program. A total of 150 pullout specimens were fabricated for the experiment. Two reinforcing bar orientations were considered with respect to the casting direction; vertical bars and horizontal bars, the latter of which was prepared to evaluate top-bar effect. Considered variables included four RFA replacement ratios (RFArs), two water-absorption grades (RFA-A: 5.83%, RFA-B: 7.95%) of RFA and three reinforcing bar locations (75, 225 and 375 mm height from the bottom of the casting mold). In addition, to evaluate the thermal and aging effect on bond behavior between the reinforcing bar and RFA concrete, some parts of pullout specimens had exposed to rapid freeze–thaw environment or been cured at air during 28 or 730 days. Test results demonstrated that bond strength does not seem to be affected by the RFAr for higher RFA grades (RFA-A), at least up to 60% RFAr. In contrast, the RAC including lower RFA grade (RFA-B) showed clear decreases in bond strength with increasing RFAr, similar to the trend observed for compressive strength. For horizontal pullout specimens, RFA concrete specimens showed higher bond strength gap between top and bottom bars than natural aggregate concrete (NAC) specimens. Bond strengths of the horizontally cast pullout specimens were affected by the flowability of concrete rather than the RFAr or RFA grade. No noticeable degradation occurred during freeze–thaw cycling of the RAC specimens, indicating that the RFA used in this study is appropriate for use in freeze–thaw environments.     

Bond strength prediction for deformed steel rebar embedded in recycled coarse aggregate concrete

This paper summarizes the results of an experimental investigation into the bond behavior between recycled aggregate concrete (RAC) and deformed steel rebars, with the main variables being the recycled coarse aggregate replacement ratio (RCAr) and water-to-cement ratio of the concrete mixture. The investigation into splitting cracking strength indicates that the degradation of the bond splitting tensile stress of the cover concrete was affected by not only the roundness of the coarse aggregate particles but also the weak interfacial transition zone (ITZ) between the cement paste and the RCA that has a more porous structure in the ITZ than normal concrete. In this study, a linear relationship between the bond strength and the density of the RCA was found, but the high compressive strength reduced the effects of the parameters. To predict the bond strength of RAC using the main parameters, a multivariable model was developed using nonlinear regression analysis. It can be inferred from this study that the degradation characteristic of the bond strength of RAC can be predicted well, whereas other empirical equations and code provisions are very conservative.     

Performance evaluation of asphalt mixtures containing recycled concrete aggregates

Abstract

To evaluate the feasibility of using Recycled Concrete Aggregates (RCA) in asphalt mixtures, the coarse RCA and fine RCA were prepared as a partial replacement of the natural aggregates (NA). Different amounts of replacement of NA with RCA were investigated, and the mechanical properties and pavement performance of asphalt mixtures containing different proportions of RCA were analysed based on laboratory tests. The results indicated that with increasing the RCA percentage, the optimum asphalt content increased and the bulk density of mixtures decreased as well. Mixtures containing 40% coarse RCA or 20% fine RCA both showed satisfactory performance. Besides, the mixture containing 40% fine RCA had the highest asphalt content, but gave much better performance compared to the virgin mix except for its bad resistance to permanent deformation. Finally, the pavement performance of mixtures containing 60% coarse RCA and 50% coarse RCA were unacceptable.     

Prediction model of carbonation depth for recycled aggregate concrete

The prediction of carbonation depth for recycled aggregate concrete (RAC) is investigated in this paper. The existing prediction models were evaluated, and it showed that the coefficient of variation (COV) of model error for the existing models is high. By introducing the weighed water absorption of aggregates, the COV of model error can be effectively decreased. Compared with the existing models, the proposed model can predict more accurate carbonation depths. For RAC specimens, compared with the fib model and Xiao and Lei's model-a, the COV of model error of the proposed model is 0.36 which is decreased by 33.3%, and when compared with Xiao and Lei's model-b and Silva et al.’s model, the corresponding decreases are 55.2% and 16.2%. Finally, the proposed model is validated by a 10-year-old carbonation experiment, which indicates that the proposed model is reasonable and can be applied to predict the carbonation depth of RAC.     

Application of a weighted Grey-Taguchi method for optimizing recycled aggregate concrete mixtures

Assessment of the optimal mixture is an important issue to obtain desired quality. This paper integrates grey relational analysis and an objective weighting technique into the Taguchi method to propose the weighted Grey-Taguchi method. This method can be employed to assess the optimal mixture with multiple responses. In the application of this method, water/cement ratio, volume ratio of recycled coarse aggregate, replacement by river sand, content of crushed brick, and cleanliness of aggregate are selected as control factors with responses of slump, slump-flow, resistivity (7-day, 14-day, 28-day), ultrasonic pulse velocity (7-day, 14-day, 28-day), and compressive strength (7-day, 14-day, 28-day) to assess the optimal mixture of recycled aggregate concrete. Results demonstrate and verify that the optimal mixture has a water/cement ratio of 0.5, a volume fraction of recycled coarse aggregate of 42.0%, 100% replacement of river sand, 0% crushed brick, and water-washed aggregates.     

Carbonation behaviour of recycled aggregate concrete

This paper reviews the effect of incorporating recycled aggregates, sourced from construction and demolition waste, on the carbonation behaviour of concrete. It identifies various influencing aspects related to the use of recycled aggregates, such as replacement level, size and origin, as well as the influence of curing conditions, use of chemical admixtures and additions, on carbonation over a long period of time. A statistical analysis on the effect of introducing increasing amounts of recycled aggregates on the carbonation depth and coefficient of accelerated carbonation is presented. This paper also presents the use of existing methodologies to estimate the required accelerated carbonation resistance of a reinforced recycled aggregate concrete exposed to natural carbonation conditions with the use of accelerated carbonation tests. Results show clear increasing carbonation depths with increasing replacement levels when recycled aggregate concrete mixes are made with a similar mix design to that of the control natural aggregate concrete. The relationship between the compressive strength and coefficients of accelerated carbonation is similar between the control concrete and the recycled aggregate concrete mixes.     

Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry

One of the most promising strategies to manage the large volume of construction and demolition (C&D) waste is recycling and utilizing it for the production of new concrete. However, recycled concrete aggregate (RCA) derived from C&D waste possesses relatively higher porosity and water absorption capability, which often limits its wild utilization. In this study, pozzolan slurry (includes silica fume, nano-SiO₂, and fly ash slurries) and CO₂ treatments as enhancement methods for RCA were investigated. Test results showed that CO₂ treatment was more effective in reducing water absorption and enhancing fluidity, whereas pozzolan slurry treatment could decrease fluidity. Mortars prepared with treated RCA exhibited better mechanical strength and higher resistance towards carbonation and chloride-ion diffusion than those with untreated RCA. Both pozzolan slurry and CO₂ treatments enhanced not only the properties of RCA, but also the old and new interfacial transition zones (ITZs) as demonstrated in the measured micro-hardness and SEM observation.     

Influence of recycled aggregate on slump and bleeding of fresh concrete

The recycling of construction and demolition (C&;D) waste as a source of aggregates for the production of new concrete has attracted increasing interests from the construction industry. While the environmental benefits of using recycled aggregates are well accepted, some unsolved problems prevent this type of material from wide application in structural concrete. One of the major problems with the use of recycled aggregates in structural concrete is their high water absorption capacity which leads to difficulties in controlling the properties of fresh concrete and consequently influences the strength and durability of hardened concrete. This paper presents an experimental study on the properties of fresh concrete prepared with recycled aggregates. Concrete mixes with a target compressive strength of 35 MPa are prepared with the use of recycled aggregates at the levels from 0 to 100% of the total coarse aggregate. The influence of recycled aggregate on the slump and bleeding are investigated. The effect of delaying the starting time of bleeding tests and the effect of using fly ash on the bleeding of concrete are explored.     

Two-layer pre-stressed beams consisting of normal and steel fibered high strength concrete

The paper is focused on analysis of two-layer bending pre-stressed beams consisting of steel fibered (SF) high strength concrete (HSC) in compressed zone and normal strength concrete (NSC) in tensile zone. Investigation of such beams is important for RC structural design, because calculation of fibers volume ratio is significant, like that of reinforcing steel bars for usual RC elements. In other words, such elements are made of high performance concrete (HPC). There is a growing tendency that more effective HPC structures replace NSC ones, first of all in pre-stressed elements. Definition of the HSC class lower limit, to be used in the compressed zone of a two-layer pre-stressed beam, is given. It was demonstrated that SF have little effect on the beam elastic deflections. However, the ultimate deflections of the section increase because additional potential for plastic energy dissipation (PED) in the bending element. NSC, used in the section tensile zone, contributes additionally about 20% to the section’s PED potential compared to one-layer HSC beams. In order to guarantee sufficient section’s ductility of the pre-stressed beams, required to withstand dynamic loadings, a minimum SF ratio is proposed to be considered. The fibers take the tensile stresses, yielding cracks in the concrete matrix. A design method for calculation of the SF volume ratio, as a function of required ductility, is proposed. A numerical example, illustrating the efficiency of this method is presented.     

Performance evaluation of structural concrete using controlled quality coarse and fine recycled concrete aggregate

This paper presents the fresh, mechanical, and durability performance, of a structural concrete mix classified as C-1, by the Canadian Standards Association (CSA) made with controlled quality Recycled Concrete Aggregate (RCA). Five mixes with water-to-cementing material (w/cm) ratio of 0.40 were produced with various RCA contents and tested against two 0% RCA control mixes made with General Use (GU) cement, and General Use Limestone cement (GUL). The RCA contents in the mixes were 10%, 20%, and 30% by coarse aggregate volume replacement, as well as 10% and 20% fine and coarse (granular) aggregate volume replacement. All evaluated mixes met the specifications from the CSA for fresh, mechanical, and durability properties. The coarse RCA mixes performed better than the granular RCA mixes in terms of flexural and splitting tensile strengths, linear drying shrinkage, water sorptivity, and rapid chloride-ion permeability, where the test results were significantly affected by the ultra fines present in the granular RCA.     

Evaluation of the stress-strain behavior of confined recycled aggregate concrete under monotonic dynamic loadings

Recycled aggregate concrete (RAC) has been attracting worldwide research interests due to its ecological and economic significance. However, RAC has so far mainly been limited to non-structural applications or structural members subjected to static loadings. In this study, the effects of strain rates, the confinement, and the RCA replacement ratio on the mechanical behaviors of confined recycled aggregate concrete (CRAC) are investigated through dynamic tests. The corresponding dynamic increase factor (DIF), confining increase factor (CIF) and replacement ratio influence factor (RIF) are formulated. A constitutive model for CRAC is then proposed through applying DIFs, CIFs, and RIFs to the characteristic parameters. Finally, the predicted stress-strain relationships of test samples using the proposed constitutive model are compared and evaluated with the experimental results. It is concluded that the proposed constitutive model can be applied to the further dynamic nonlinear analysis of RAC structures.     

Bar-concrete bond in mixes containing calcium carbide residue,fly ash and recycled concrete aggregate

A mixture of calcium carbide residue and fly ash (CRFA) is an innovative new binder for concrete instead of using ordinary Portland cement (OPC). Therefore, this study aims at investigating the bond interaction between common steel reinforcing bars and the aforementioned concrete. To this end, both CRFA and OPC concretes using crushed limestone and recycled concrete aggregate (RCA) as a coarse aggregate were prepared to investigate the bond strength of smooth and deformed bars by pull-out tests. The bond stress−slip relationships were also identified to determine the effects of CRFA binder and RCA on the bond strength behavior. The results indicate that the values the of bond-slip behavior and bond strengths of steel bar in CRFA concretes are similar to those embedded in OPC concrete. Moreover, the bond strength was significantly affected by RCA and the types of steel bar. Although the concretes had the same compressive strengths, the deformed bar embedded in CRFA concrete with RCA had a lower bond strength than the one with crushed limestone. However, the reduction in bond strength of the CRFA concrete with RCA was still less than that of OPC concrete with RCA. For the CRFA concretes, the bond strengths of the deformed bars were approximately 1.7–3.6 times higher than that of smooth bars.     

再生骨料掺配比对再生透水混凝土性能的影响

为研究再生骨料在透水混凝土（RPC）中的应用,选用废弃路面素混凝土块为再生骨料来源,设计2种系列,研究再生骨料透水混凝土中再生骨料掺配问题,即分别以粒径9.5~19.0 mm,再生骨料按0%、25%、50%、75%和100%（基准）质量替代同粒径天然骨料碎石（系列1）和以4.75~9.5 mm、9.5~19.0 mm两种粒径,再生骨料按0∶1、1∶1、1∶2、2∶1、2∶3和3∶2掺比（系列2）制备RPC,并分析其物理、力学、透水性能及其相互关系,得到了合理的再生骨料替代率和双粒级掺比,在1∶1和2∶1掺配下能够得到较好的强度及透水性能。通过切割试块的图像化处理,分析其孔隙分布特征和趋势,并将平面孔隙率、等效孔径和透水系数联系起来。结果表明,再生透水混凝土的透水能力主要取决于截面孔隙个数和面积。     

Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates

In this study, the fresh and hardened properties of self-compacting concrete (SCC) using recycled concrete aggregate as both coarse and fine aggregates were evaluated. Three series of SCC mixtures were prepared with 100% coarse recycled aggregates, and different levels of fine recycled aggregates were used to replace river sand. The cement content was kept constant for all concrete mixtures. The SCC mixtures were prepared with 0, 25, 50, 75 and 100% fine recycled aggregates, the corresponding water-to-binder ratios (W/B) were 0.53 and 0.44 for the SCC mixtures in Series I and II, respectively. The SCC mixtures in Series III were prepared with 100% recycled concrete aggregates (both coarse and fine) but three different W/B ratios of 0.44, 0.40 and 0.35 were used. Different tests covering fresh, hardened and durability properties of these SCC mixtures were executed. The results indicate that the properties of the SCCs made from river sand and crushed fine recycled aggregates showed only slight differences. The feasibility of utilizing fine and coarse recycled aggregates with rejected fly ash and Class F fly ash for self-compacting concrete has been demonstrated.     

Impact of particle packing mix design method on fracture properties of natural and recycled aggregate concrete

The fracture properties of four types of concrete prepared using natural coarse aggregate and recycled coarse aggregate and conventional and particle packing method (PPM) of mix design approaches are studied. The three‐point bending (TPB) test is performed using three different sizes of single edge notched beam. The fracture energy is calculated from the load‐CMOD curve obtained in the TPB test, and in this process the load‐CMOD curve is curtailed at 2% of the depth of the beam. Based on CTOD_c and w₁ relationship, appropriate softening function is used to estimate the double‐K fracture parameters. The fracture energy and fracture toughness parameters of recycled aggregate concrete (RAC) is inferior to the natural aggregate concrete (NAC). The PPM mix design improves the fracture properties of concrete in comparison to the conventional mix design approach. The fracture properties of PPM mix designed RAC are comparable to that of NAC prepared using conventional method.