Effect of camel chymosin on the texture,functionality, and sensory properties of low-moisture,part-skim Mozzarella cheese

The objective of this study was to compare the effect of coagulant (bovine calf chymosin, BCC, or camel chymosin, CC), on the functional and sensory properties and performance shelf-life of low-moisture, part-skim (LMPS) Mozzarella. Both chymosins were used at 2 levels [0.05 and 0.037 international milk clotting units (IMCU)/mL], and clotting temperature was varied to achieve similar gelation times for each treatment (as this also affects cheese properties). Functionality was assessed at various cheese ages using dynamic low-amplitude oscillatory rheology and performance of baked cheese on pizza. Cheese composition was not significantly different between treatments. The level of total calcium or insoluble (INSOL) calcium did not differ significantly among the cheeses initially or during ripening. Proteolysis in cheese made with BCC was higher than in cheeses made with CC. At 84 d of ripening, maximum loss tangent values were not significantly different in the cheeses, suggesting that these cheeses had similar melt characteristics. After 14 d of cheese ripening, the crossover temperature (loss tangent = 1 or melting temperature) was higher when CC was used as coagulant. This was due to lower proteolysis in the CC cheeses compared with those made with BCC because the pH and INSOL calcium levels were similar in all cheeses. Cheeses made with CC maintained higher hardness values over 84 d of ripening compared with BCC and maintained higher sensory firmness values and adhesiveness of mass scores during ripening. When melted on pizzas, cheese made with CC had lower blister quantity and the cheeses were firmer and chewier. Because the 2 types of cheeses had similar moisture contents, pH values, and INSOL Ca levels, differences in proteolysis were responsible for the firmer and chewier texture of CC cheeses. When cheese performance on baked pizza was analyzed, properties such as blister quantity, strand thickness, hardness, and chewiness were maintained for a longer ripening time than cheeses made with BCC, indicating that use of CC could help to extend the performance shelf-life of LMPS Mozzarella.     

Influence of proteolytic Lactococcus lactis subsp. cremoris on ripening of reduced-fat Cheddar cheese made with camel chymosin

This study investigated proteolysis in reduced-fat Cheddar cheese produced with camel chymosin and Lactococcus lactis subsp. cremoris with the ability to cleave the N-terminus of α_S1-casein. The aim was to match the activity of bovine chymosin, which leads to softer cheese structure than camel chymosin. Cheeses were analysed for gross composition, casein and peptide breakdown, release of free amino acids, structure parameters and sensory characteristics. Selected Lc. lactis subsp. cremoris increased the amount of peptides and, to a limited extent, the total amount of free amino acids in the cheeses. One group of experimental cheeses was found to have a significantly firmer structure, higher stress at fracture and modulus of deformability than the reference cheeses. The addition of the selected proteolytic dairy strains of Lc. lactis subsp. cremoris to the cheeses did not result in extended breakdown of α_S1-casein or a softer cheese structure.     

Influence of calcium and phosphorus, lactose, and salt-to-moisture ratio on Cheddar cheese quality: proteolysis during ripening

Proteolysis in cheese is influenced by the state of proteins (protein-calcium-phosphate interactions), level of indigenous milk enzymes (plasmin), externally added milk-clotting enzymes (chymosin), and endogenous and exogenous enzymes from starter and non-starter lactic acid bacteria (NSLAB). The objective of this study was to determine how different levels of calcium (Ca) and phosphorus (P), residual lactose, and salt-to-moisture ratio (S/M) in cheese influence proteolysis during ripening. Eight cheeses with 2 levels of Ca and P (0.67 and 0.47% vs. 0.53 and 0.39%, respectively), 2 levels of lactose at pressing (2.4 vs. 0.78%), and 2 levels of S/M (6.4 vs. 4.8%) were manufactured. The cheeses were analyzed for changes in pH 4.6-soluble N, and starter and NSLAB counts during 48 wk of ripening. Cheeses at d 1 were also analyzed for residual chymosin, plasmin, and plasminogen activity. A significant increase in soluble N was observed during ripening for all the treatments. Cheeses with low Ca and P, low lactose, and low S/M treatments exhibited higher levels of proteolysis as compared to their corresponding high treatments. Differences in the rate of proteolysis for cheeses with different levels of Ca and P might be due to changes in protein conformation and differences in residual chymosin in the cheeses. Cheeses with low Ca and P were manufactured by lowering the pH at set and drain, which led to higher chymosin retention in cheeses with low Ca and P compared with high Ca and P. Differences in proteolysis between treatments with different levels of lactose were also partly attributed to residual chymosin activity. In all treatments, a major fraction of plasmin existed as plasminogen, indicating minimal contribution of plasmin to proteolysis in Cheddar cheeses. The number of starter bacteria, in all treatments, decreased significantly during ripening. However, the decrease was larger in the case of high S/M treatments compared with low S/M treatments. In contrast, the number of NSLAB increased during ripening, and low S/M cheeses had higher counts compared with high S/M cheeses. The differences in proteolysis due to S/M were partially attributed to changes in protein conformation or bacterial proteolytic activity.     

Biochemical patterns in ovine cheese: Influence of probiotic strains

This study was undertaken to evaluate the effect of lamb rennet paste containing probiotic strains on proteolysis, lipolysis, and glycolysis of ovine cheese manufactured with starter cultures. Cheeses included control cheese made with rennet paste, cheese made with rennet paste containing Lactobacillus acidophilus culture (LA-5), and cheese made with rennet paste containing a mix of Bifidobacterium lactis (BB-12) and Bifidobacterium longum (BB-46). Cheeses were sampled at 1, 7, 15, and 30 d of ripening. Starter cultures coupled with probiotics strains contained in rennet paste affected the acidification and coagulation phases leading to the lowest pH in curd and cheese containing probiotics during ripening. As consequence, maturing cheese profiles were different among cheese treatments. Cheeses produced using rennet paste containing probiotics displayed higher percentages of α_S1-I-casein fraction than traditional cheese up to 15 d of ripening. This result could be an outcome of the greater hydrolysis of α-casein fraction, attributed to higher activity of the residual chymosin. Further evidence for this trend is available in chromatograms of water-soluble nitrogen fractions, which indicated a more complex profile in cheeses made using lamb paste containing probiotics versus traditional cheese. Differences can be observed for the peaks eluted in the highly hydrophobic zone being higher in cheeses containing probiotics. The proteolytic activity of probiotic bacteria led to increased accumulation of free amino acids. Their concentrations in cheese made with rennet paste containing Lb. acidophilus culture and cheese made with rennet paste containing a mix of B. lactis and B. longum were approximately 2.5 and 3.0 times higher, respectively, than in traditional cheese. Principal component analysis showed a more intense lipolysis in terms of both free fatty acids and conjugated linoleic acid content in probiotic cheeses; in particular, the lipolytic pattern of cheeses containing Lb. acidophilus is distinguished from the other cheeses on the basis of highest content of health-promoting molecules. The metabolic activity of the cheese microflora was also monitored by measuring acetic, lactic, and citric acids during cheese ripening. Cheese acceptability was expressed for color, smell, taste, and texture perceived during cheese consumption. Use of probiotics in trial cheeses did not adversely affect preference or acceptability; in fact, panelists scored probiotic cheeses higher in preference over traditional cheese, albeit not significantly.     

Ultrafiltered milk reduces bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide-producing culture

The objectives were to reduce bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide (EPS)-producing culture and study relationships among ultra-filtration (UF), residual chymosin activity (RCA), and cheese bitterness. In previous studies, EPS-producing cultures improved the textural, melting, and viscoelastic properties of reduced-fat Cheddar cheese. However, the EPS-positive cheese developed bitterness after 2 to 3 mo of ripening due to increased RCA. We hypothesized that the reduced amount of chymosin needed to coagulate UF milk might result in reduced RCA and bitterness in cheese. Reduced-fat Cheddar cheeses were manufactured with EPS-producing and nonproducing cultures using skim milk or UF milk (1.2×) adjusted to a casein:fat ratio of 1.35. The EPS-producing culture increased moisture and RCA in reduced-fat Cheddar cheese. Lower RCA was found in cheese made from UF milk compared with that in cheese made from control milk. Ultrafiltration at a low concentration rate (1.2×) produced EPS-positive, reduced-fat cheese with similar RCA to that in the EPS-negative cheese. Slower proteolysis was observed in UF cheeses compared with non-UF cheeses. Panelists reported that UF EPS-positive cheese was less bitter than EPS-positive cheese made from control milk. This study showed that UF at a low concentration factor (1.2×) could successfully reduce bitterness in cheese containing a high moisture level. Because this technology reduced the RCA level (per g of protein) to a level similar to that in the control cheeses, the contribution of chymosin to cheese proteolysis would be similar in both cheeses.     

Effect of high pressure treatment applied on starter culture or on semi-ripened cheese in the quality and ripening of cheese in brine

Cheese ripening acceleration is of continuous interest for the industry. High-pressure (HP) treatment of starter cultures used in cheese-manufacturing offers the potential to accelerate ripening by increasing the activity of their intracellular peptidases that contribute in the development of desired cheese organoleptic characteristics.The objective of the present research was the investigation of the effect of HP treatment (200 MPa-20 °C - 20 min) directly on white brined cheese or on the starter culture used for its manufacture (Str. thermophilus:L. lactis:L. bugaricus 2:1:1). For this purpose, the microbial, textural, physicochemical and organoleptic characteristics and proteolysis were assessed during the 2nd stage of ripening in cold stores. Control cheese without any treatment was also studied.Cheeses made with HP-treated starters had increased secondary proteolysis. Organoleptic scoring of these cheeses was higher during the whole storage period compared to control and HP-treated cheese. Their superiority was evident even at the early stages of ripening in cold stores, since no bitterness was detected. On the contrary, although HP treated cheeses showed the highest increase in aminopeptidases activities, this was not correlated with the studied ripening indices or the organoleptic characteristics.According to the results, HP-treated starter culture can accelerate proteolysis and potentially the ripening of cheese-in-brine.Industrial relevanceThe data obtained from this work suggest that application of HP treatment under optimized conditions on cheeses in brine starter cultures or on whole cheeses can be effectively used for the production of products with reduced ripening time. This is of great importance for the cheese industries, since the storage period for ripening is long (higher than two months), while applying HP treatment as suggested in this study, this time may be reduced to less than one month, producing cheeses of superior quality.     

Effects of blends of camel and calf chymosin on proteolysis,residual coagulant activity,microstructure, and sensory characteristics of Beyaz peynir

Beyaz peynir, a white brined cheese, was manufactured using different blends of camel chymosin (100, 75, 50, 25, and 0%) with calf chymosin and ripened for 90 d. The purpose of this study was to determine the best mixture of coagulant for Beyaz peynir, in terms of proteolysis, texture, and melting characteristics. The cheeses were evaluated in terms of chemical composition, levels of proteolysis, total free amino acids, texture, meltability, residual coagulant activity, microstructure, and sensory properties during 90 d of ripening. Differences in the gross chemical composition were statistically significant for all types of cheeses. Levels of proteolysis were highly dependent on the blends of the coagulants. Higher proteolysis was observed in cheeses that used a higher ratio of calf chymosin. Differences in urea-PAGE and peptide profiles of each cheese were observed as well. Meltability values proportionally increased with the higher increasing levels of calf chymosin in the blend formula. These coagulants had a slight effect on the microstructure of cheeses. The cheese made with camel chymosin had a harder texture than calf chymosin cheese, and hardness values of all cheese samples decreased during ripening. The cheeses with a high ratio of calf chymosin had higher residual enzyme activity than those made with camel chymosin. No significant difference in sensory properties was observed among the cheeses. In conclusion, cheeses made with a high level of calf chymosin had a higher level of proteolysis, residual coagulant activity, and meltability. The cheeses also had a softer texture than cheeses made with a high content of camel chymosin. Camel chymosin may be used as a coagulant alone if low or limited levels of proteolysis are desired in cheese.     

Influence of ovine milk in mixture with bovine milk on the quality of reduced fat Muenster-type cheese

Reduced fat Muenster-type cheeses were manufactured from a mixture of bovine skim milk and ovine whole milk and from bovine milk only (control). Cheeses were evaluated at 15, 30, 60, 90, 120, and 180 d of age for numbers and type of microflora, casein hydrolysis, and amounts of free fatty acids. alpha(s1)-Casein degradation was similar for both cheeses during the aging period, but beta-casein degradation proceeded at a faster rate in the control cheese. The total amounts of free fatty acids remained constant throughout the ripening time; however, the cheeses produced with bovine/ovine milk yielded a significantly larger amount of caprylic (C8:0) and capric (C10:0) acids compared with the bovine milk cheeses. Lactobacilli increased during the aging period, while the populations of lactic acid bacteria, yeast and molds, and lipolytic organisms did not increase. Both cheeses had comparable cheese flavor intensity, but the bovine/ovine milk cheese had a greater occurrence of off flavors. The bovine/ovine milk cheeses were firmer than the bovine cheeses throughout the aging period.     

The effects of some starter cultures on the properties of Turkish White cheese

White cheese samples were manufactured from bovine milk using three different commercial direct vat starter cultures (DVS-1, -2 and -3) and a lyophilized culture, and ripened at 4 ± 1°C for 90 days. The composition, titratable acidity and ripening indices of the cheese samples were determined on the 2nd, 30th, 60th and 90th days of ripening. The ratios of total solids, protein and fat were higher for cheeses manufactured using DVS-2 and lyophilized cultures but the titratable acidity in cheese produced using DVS-3 and lyophilized cultures was higher (P < 0.01). The mean value of the ripening indices of the cheese produced using the lyophilized culture was lower than the cheeses produced with added DVS cultures (P < 0.05). The total solids, ash, salt ratios, titratable acidity and ripening indices values increased for all types of white cheeses during ripening (P < 0.05).     

Effects of freezing and frozen storage on the microstructure and texture of ewe's milk cheese

Semi-hard ewe's milk cheeses, frozen immediately after manufacture either slowly at –35 °C or rapidly at –80 °C and stored at –20 °C for 4 months were studied for microstructural and textural characteristics during subsequent ripening. Two control groups were used to establish the effect of freezing: the fresh unfrozen cheese and cheese thawed immediately after freezing. Freezing proper did not result in any marked changes in the textural parameters of the cheeses, but considerable changes were found in slowly frozen cheeses after 4 months of frozen storage. Shear strength values were lower in all frozen and stored cheeses, particularly in cheese samples frozen slowly compared to those in the unfrozen control batch. This parameter and firmness values were significantly lower in both slowly and rapidly frozen cheeses at the completion of ripening. Ripening tended to offset differences in elasticity, noticeable in the cheeses during the first 30 days of ripening. Light microscopy and electron microscopy revealed small cracks and ruptures in the cheeses which could not be observed by the naked eye. More extensive damage to the cheese microstructure was found in slowly frozen cheese samples stored frozen for 4 months.     

Texture of low-fat Iranian White cheese as influenced by gum tragacanth as a fat replacer

The effect of different concentrations of gum tragacanth on the textural characteristics of low-fat Iranian White cheese was studied during ripening. A batch of full-fat and 5 batches of low-fat Iranian White cheeses with different gum tragacanth concentrations (without gum or with 0.25, 0.5, 0.75, or 1 g of gum/kg of milk) were produced to study the effects of fat content reduction and gum concentration on the textural and functional properties of the product during ripening. Cheese samples were analyzed with respect to chemical, color, and sensory characteristics, rheological parameters (uniaxial compression and small-amplitude oscillatory shear), and microstructure. Reducing the fat content had an adverse effect on cheese yield, sensory characteristics, and the texture of Iranian White cheese, and it increased the instrumental hardness parameters (i.e., fracture stress, elastic modulus, storage modulus, and complex modulus). However, increasing the gum tragacanth concentration reduced the values of instrumental hardness parameters and increased the whiteness of cheese. Although when the gum concentration was increased, the low-fat cheese somewhat resembled its full-fat counterpart, the interaction of the gum concentration with ripening time caused visible undesirable effects on cheese characteristics by the sixth week of ripening. Cheeses with a high gum tragacanth concentration became very soft and their solid texture declined somewhat.     

Accelerated ripening of Cheddar cheese at elevated temperatures

Blocks (20 kg) of Cheddar cheese from a single vat were obtained from a local factory. Half the cheeses were cooled rapidly (15 h) to ripening temperature (8, 12 or 16 °C) and half were cooled slowly over 8 days to the same ripening temperatures. Cheeses were ripened for 9 months at 7 different time/temperature combinations. Ripening temperature had little influence on the number of non-starter lactic acid bacteria in the cheeses after 9 months, although rapid cooling to and ripening at 8 °C drastically reduced the growth rate of these adventitious bacteria. Proteolysis (as determined by urea-polyacrylamide gel electrophoresis; increases in water-soluble N; increases in phosphotungstic acid-soluble N; Cd ninhydrin-reactive amino groups; and reverse-phase HPLC) and lipolysis were accelerated by increasing the ripening temperature and by slow cooling of the cheeses. The rate of ripening was increased or decreased by changing the temperature. Cheeses ripened at 16 °C generally received the highest flavour scores, particularly early during ripening. However, the texture of these cheeses deteriorated after prolonged ripening at 16 °C. Maturation at 12 °C was considered to be optimal for the commercial acceleration of Cheddar cheese ripening.     

Suitability of recombinant camel (Camelus dromedarius) chymosin as a coagulant for Cheddar cheese

Cheddar-type cheeses were manufactured using fermentation-produced camel or calf chymosin. There were no significant differences in the composition and pH between the cheeses made with either coagulant. The extent of primary proteolysis was significantly lower in cheeses made with camel chymosin than in cheeses made with calf chymosin. There were large quantitative differences between the peptide profiles of cheeses; however, the levels of amino acids were similar except for isoleucine, histidine and lysine. The cheeses made with camel chymosin were characterized by lower intensities of sulphur and brothy flavours and showed less bitter taste; however, the cheeses made with calf chymosin had greater breakdown of texture, higher smoothness and mouthcoating and were more cohesive and adhesive. The results of this study suggest that camel chymosin appears to be suitable for making Cheddar cheese with lower levels of proteolysis but with good flavour.     

Yield,changes in proteolysis,and sensory quality of Prato cheese produced with different coagulants

The objective of this research was to compare the effect of 2 fungal proteases, one that is already commercially established as a milk-clotting agent and another produced at the laboratory scale, on Prato cheese composition, protein and fat recovery, yield, and sensory characteristics. Cheeses were produced according to the traditional protocol, using protease from the fungus Thermomucor indicae-seudaticae N31 and commercial coagulant from Rhizomucor spp. as clotting agents. A 2 × 6 factorial design with 3 replications was performed: 2 levels of coagulants and 6 levels of storage time. After 5, 12, 19, 33, 43, and 53 d of refrigerated storage (12°C), cheeses were monitored for proteolysis, firmness, and casein degradation by capillary electrophoresis. Sensory acceptance was evaluated after 29 d of manufacturing. The different coagulants did not statistically affect Prato cheese composition, protein and fat recovery, and yield. Both cheeses presented good sensory acceptance. Proteolysis increased and firmness decreased for both cheeses during the storage time, as expected for Prato cheese. Caseins were well separated by capillary electrophoresis and the results showed, with good resolution, that the cheeses exhibited similar protein hydrolysis profile. Both cheeses presented good sensory acceptance. The gathered data showed that the protease from T. indicae-seudaticae N31 presented similar action compared with the commercial enzyme, indicating its efficiency as clotting agent for Prato cheese manufacture.     

Volatile composition and sensory properties of industrially produced Idiazabal cheese

The volatile composition and sensory properties of industrially produced Idiazabal cheeses made from ewes’ raw milk (RM) or pasteurised milk (PM) and with addition of different starter cultures were compared. Cheeses were analysed at 90 and 180 d of ripening. Acids were the major volatile compounds in RM cheeses. Methyl ketones were the major volatile compounds in PM cheeses at 90 ripening days. However, the content of acids strongly increased with ripening whereas the content of ketones decreased in PM cheeses. The concentration of esters was higher in RM cheeses than in PM cheeses. No differences were found in the content of alcohols. Most aldehydes, hydrocarbons, terpenes and furans identified were minor volatile compounds in both RM and PM cheeses. In RM cheeses, characteristic sensory attributes for the aroma of Idiazabal cheese were present at 3 months, whereas in PM cheeses those desirable sensory attributes did not appear until 6 months of ripening.     

Ripening of extra-hard cheese made with mesophilic DL-starter

Extra hard cheese is commonly made with thermophilic starters using high temperatures to stimulate expulsion of whey. In this work, microflora, proteolysis and volatiles were investigated in an extra-hard cheese made with mesophilic DL-starter, produced using challenging cooking temperatures for the starter bacteria over several hours. Cheese from six commercially produced vats was investigated over 56 weeks. The number of starter bacteria decreased after three weeks of ripening. Casein breakdown was characterised by chymosin and plasmin activity on α_s1- and β-caseins, respectively. Peptide profiles showed accumulation of Lactococcus derived peptides from α_s1-CN f1–23, and the peptide β-CN 29–93 as a result of joint plasmin and chymosin activity and absence of highly proteolytic thermophilic Lactobacillus, commonly present in extra-hard cheese. The composition of amino acids depended mainly on starter during the first 26 weeks of ripening. The content of volatiles depended both on ripening time and the starter used.     

Influence of calcium and phosphorus, lactose, and salt-to-moisture ratio on cheddar cheese quality: pH changes during ripening

The pH of cheese is an important attribute that influences its quality. Substantial changes in cheese pH are often observed during ripening. A combined effect of calcium, phosphorus, residual lactose, and salt-to-moisture ratio (S/M) of the cheese on the changes in cheese pH during ripening was investigated. Eight cheeses with 2 levels of Ca and P (0.67 and 0.47% vs. 0.53 and 0.39%, respectively), lactose at pressing (2.4 vs. 0.78%), and S/M (6.4 vs. 4.8%) were manufactured. All the cheeses were salted at a pH of 5.4, pressed for 5 h, and then ripened at 6 to 8°C. The pH of the salted curds before pressing and the cheeses during 48 wk of ripening was measured. Also, cheeses were analyzed for water-soluble Ca and P, organic P, and bound inorganic P during ripening. Changes in organic acids’ concentration and shifts in the distribution of Ca and P between different forms were studied in relation to changes in pH. Cheeses with low S/M exhibited a larger increase in acid production during ripening compared with high S/M cheeses. Cheeses with the highest concentration of bound inorganic P exhibited the highest pH, whereas cheeses with the lowest concentration of bound inorganic P exhibited the lowest pH among the 8 treatments. Although conversion of lactose to short-chain, water-soluble organic acids decreased cheese pH, bound inorganic phosphate buffered the changes in cheese pH. Production of acid in excess of the buffering capacity (which was the case in low Ca and P and low S/M treatments) led to a low pH, whereas solubilization of bound inorganic P in excess to acid production (which was the case in high Ca and P and high S/M treatments) led to an increase in pH. However, for cheeses with high Ca and P and low S/M, changes in cheese pH were influenced by the level of residual lactose. Hence, pH changes in Cheddar cheese can be modulated by a concomitant control on the amount and state of Ca and P, level of residual lactose, and S/M of the cheese.     

Effect of coagulant type and level on the properties of half-salt,half-fat Cheddar cheese made with or without adjunct starter: Improving texture and functionality

The potential of increasing proteolysis as a means of enhancing the texture and heat-induced flow of half-fat, half-salt Cheddar cheese made with control culture (CL, Lactococcus lactis subsp. cremoris/lactis) or adjunct culture (AC, CL + Lactobacillus helveticus) was investigated. Proteolysis was altered by substituting bovine chymosin (BC) with camel chymosin (CC), or by a 2.5-fold increase in level of BC. In cheese with CL-culture, increasing BC led to a large increase in pH and more rapid degradation of α_S1-casein during maturation, and cheese that was less firm after 180 d. In contrast, substitution of BC with CC in cheeses made with CL-culture had an opposite effect. While chymosin type and level had a similar influence on α_S1-casein hydrolysis in the AC-culture cheeses, it did not affect texture or flowability. Grading indicated that cheese made with AC-culture and with a higher level of BC was the most appealing.