MOF-derived cobalt manganese phosphide as highly efficient electrocatalysts for hydrogen evolution reaction

Hydrogen is considered as a viable alternative to traditional fossil fuels. Hydrogen evolution reaction (HER) by electrochemical water splitting is the most reliable and effective way for the sustainable production of pure hydrogen. The design and synthesis of highly active and stable non-noble-metal-based electrocatalysts is the core of the large-scale application of this technology. Herein, peony petal-like CoMnP/NF nanomaterials growing on nickel foam (NF) are prepared via facile hydrothermal and phosphorization methods. The results showed that CoMnP/NF had excellent HER activity in acidic and alkaline media. In 0.5 M H₂SO₄, CoMnP/NF only needed 66.6 mV overpotential to drive the current density of 10 mA cm^?2, with a Tafel slope of 38.8 mV dec^?1. In addition, a particularly low overpotential of 53.9 mV and Tafel slope of 63 mV dec^?1 are required to achieve the same current density in the 1 M KOH electrolyte. Meanwhile, the electrocatalyst showed good stability after 1000 cyclic voltammetry tests and 12 h I-T tests. In the 1 M KOH electrolyte, the current density of 10 mA cm^?2 achieved with only 1.70 V battery voltage, and the electrocatalyst showed excellent stability. The performance of CoMnP/NF can be attributed to the synergistic effect between Co and Mn atoms and the high electrochemical surface area (ECSA). This study provides a valuable strategy for the synthesis of non-precious metals and high-performance catalytic materials.     

CoO/NF nanowires promote hydrogen and oxygen production for overall water splitting in alkaline media

The exploration of catalysts with high activity and low cost for water splitting is still necessary. Herein, a nanowire-like morphology CoO/NF electrode is synthesized using facile hydrothermal reaction and calcination treatment. The urea can regulate its morphology during the synthetic process of CoO/NF. Electrochemical studies reveal that the as-obtained CoO/NF exhibits excellent electrocatalytic performance with overpotential of 307 mV at current density of 10 mA cm⁻² and Tafel slope of 72 mV dec⁻¹ for oxygen evolution reaction, and CoO/NF delivers current density of 10 mA cm⁻² at overpotential of 224 mV for hydrogen evolution reaction. The results of the oxygen evolution reaction stability show that the overpotential of CoO/NF electrode is only increased by 4 mV at current density of 10 mA cm⁻². The two-electrode water splitting with CoO/NF electrodes as both anode and cathode needs a cell potential of 1.76 V to reach 10 mA cm⁻². Therefore, this simple method to prepare CoO/NF electrode can enhance the properties of electrocatalysts, which makes CoO/NF a promising material to replace noble metal-based catalysts.     

Three-dimensional ZnCo/MoS2–Co3S4/NF heterostructure supported on nickel foam as highly efficient catalyst for hydrogen evolution reaction

Exploring inexpensive and earth-abundant electrocatalysts for hydrogen evolution reactions is crucial in electrochemical sustainable chemistry field. In this work, a high-efficiency and inexpensive non-noble metal catalysts as alternatives to hydrogen evolution reaction (HER) was designed by one-step hydrothermal and two-step electrodeposition method. The as-prepared catalyst is composed of the synergistic MoS₂–Co₃S₄ layer decorated by ZnCo layered double hydroxides (ZnCo-LDH), which forms a multi-layer heterostructure (ZnCo/MoS₂–Co₃S₄/NF). The synthesized ZnCo/MoS₂–Co₃S₄/NF exhibits a small overpotential of 31 mV and a low Tafel plot of 53.13 mV dec^?1 at a current density of 10 mA cm^?2, which is close to the HER performance of the overpotential (26 mV) of Pt/C/NF. The synthesized ZnCo/MoS₂–Co₃S₄/NF also has good stability in alkaline solution. The excellent electrochemical performance of ZnCo/MoS₂–Co₃S₄/NF electrode originates from its abundant active sites and good electronic conductivity brought by the multilayer heterostructure. This work provides a simple and feasible way to design alkaline HER electrocatalysts by growing heterostructures on macroscopic substrates.     

In situ growth of NiCoFe-layered double hydroxide through etching Ni foam matrix for highly enhanced oxygen evolution reaction

It is of great significance to develop the nonprecious metal oxide electrocatalysts toward oxygen evolution reaction (OER) for water splitting. Herein we report an in-situ growth of the ternary NiCoFe-layered double hydroxide nanosheets on surface etching nickel foam (NiCoFe LDHs/NF) without adding any nickel precursor. In this method, etching Ni matrix by Fe³⁺ not only provides the slowly released nickel ions, but also intensifies the Fe–Ni interaction between the directly grown active species and Ni foam. Therefore the composition, electronic structure, and morphology of the electrocatalysts can be easily regulated only by adjusting Co²⁺:Fe³⁺ ratio in the precursor solution. The obtained NiCo₁Fe₁ LDH/NF, which is formed in 1:1 Co²⁺:Fe³⁺ solution, has highest content of Ni³⁺ and Co³⁺ active sites and the largest electrochemical active area. It exhibits an outstanding OER performance with a small overpotential of 231 mV at 10 mA cm^?2 and excellent durability at 50 mA cm^?2 in 1.0 M KOH solution.     

Enhanced electrochemical activity of Co3O4/Co9S8 heterostructure catalyst for water splitting

The dearth of efficient, robust, and economical electrocatalysts for water oxidation is dubiously the key obstacle for renewable energy devices, so synthesis of efficient, and cost-effective metal-based water oxidation catalysts is vital. Herein, Co₃O₄, Co₉S₈ catalysts and their heterostructure Co₃O₄/Co₉S₈ were synthesized and evaluated as water oxidation electrocatalysts. The characterization of Co₃O₄, Co₉S₈, and Co₃O₄/Co₉S₈ electrocatalysts was performed using Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction techniques. The heterostructure Co₃O₄/Co₉S₈ (1.46 V) exhibited water oxidation electrocatalysis at extremely low onset potential compared to Co₃O₄ (1.58 V), and Co₉S₈ (1.48 V) catalysts. A 281 mV overpotential required to attain a current density of 50 mA cm^?2 in alkaline solution (1 M KOH), outperforming most of Co-based benchmark electrocatalysts. Further, the Co₃O₄/Co₉S₈ heterojunction demonstrated catalytic activity with small Tafel slope of 37 mV dec^?1. The finding of electrochemical studies involving controlled potential electrolysis and long-term stability are projected to steer the future advancement in constructing efficient, economical, stable, and earth-abundant metal-based water oxidation catalysts.     

Se-doped cobalt oxide nanoparticle as highly-efficient electrocatalyst for oxygen evolution reaction

Electrolysis of water has been one of the most promising approaches for renewable energy resources while the efficient oxygen evolution reaction (OER) remains challenging. Herein, a series of different ratio of Se doped Co₃O₄ nanoparticles XSe-Co₃O₄ are prepared by hydrothermal method and applied as OER electrocatalysts. Se^2? is doped into the Co₃O₄ crystal lattice by substituting of O^2? and a large number of oxygen vacancies are generated, which provides more available activity sites for OER. Se doping increases the surface ratio of Co²⁺/Co³⁺ and accelerates the electron transport that favors OER activity promotion. The optimized doping ratio of 6%Se–Co₃O₄ presents low overpotential of 281 mV at 10 mA cm^?2, as well as a low Tafel slope of 70 mV dec^?1 in 1 M KOH solution, which has great advantages compared to the recently reported Co₃O₄-based OER electrocatalysts. This work provides new ideas for the development of efficient Co₃O₄-based OER electrocatalysts.     

High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting

The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni₉₀Mo₁₀ electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm^?2, while the Ni₄₀Mo₆₀ electrocatalyst shows an overpotential of 258 mV at 10 mA cm^?2 in OER. More significantly, the assembled Ni₄₀Mo₆₀//Ni₉₀Mo₁₀ electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm^?2 for overall water splitting.     

PBA derived FeCoP nanoparticles decorated on NCNFs as efficient electrocatalyst for water splitting

Transition metal phosphides have been known as promising electrocatalysts for hydrogen evolution and oxygen evolution reactions (HER and OER) due to their high catalytic activity. In this work, the FeCoP nanoparticles decorated on N-doped electrospun carbon nanofibers (FeCoP@NCNFs) was successfully synthesized through depositing Fe, Co-based Prussian blue analogue Co₃[Fe(CN)₆]₂·10H₂O (FeCo-PBA) onto the electrospun PVP/PAN nanofibers via layer-by-layer approach, followed by carbonization and phosphorization treatments. Benefiting from the high electrical conductivity, abundant catalytic active sites and the synergistic effect between FeCoP nanoparticles and N-doped carbon nanofibers network, the obtained FeCoP@NCNFs displays good bifunctional electrocatalytic activity. In 1 M KOH, the FeCoP@NCNFs achieves 10 mA cm^?2 at an overpotential of 290, 226 mV for OER and HER, respectively. Moreover, it demands overpotential of 196 mV to achieve 10 mA cm^?2 for HER in 0.5 M H₂SO₄. The FeCoP@NCNFs is used as both anode and cathode for overall water splitting, it requires a low voltage of 1.65 V to achieve a current density of 10 mA cm^?2 and maintains outstanding stability over 10 h. Herein, a strategy for preparing bifunctional electrocatalysts of compositing transition metal phosphides with carbon nanofibers is proposed, and the application of metal-organic framework in electrocatalytic field is further extended.     

Binder-free bifunctional SnFe sulfide/oxyhydroxide heterostructure electrocatalysts for overall water splitting

Developing robust non-noble catalysts towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is vital for large-scale hydrogen production from electrochemical water splitting. Here, we synthesize Sn- and Fe-containing sulfides and oxyhydroxides anchored on nickel foam (SnFeS_xO_y/NF) using a solvothermal method, in which a heterostructure is generated between the sulfides and oxyhydroxides. The SnFeS_xO_y/NF exhibits low overpotentials of 85, 167, 249, and 324 mV at 10, 100, 500 and 1000 mA cm^?2 for the HER, respectively, and a low overpotential of only 281 mV at 100 mA cm^?2 for the OER. When it serves as both anode and cathode to assemble an electrolyzer, the cell voltage is only 1.69 V at 50 mA cm^?2. The sulfides should be the efficient active species for the HER, while the oxyhydroxides are highly active for the OER. The unique sulfide/oxyhydroxide heterostructure facilitates charge transfer and lowers reaction barrier, thus promoting electrocatalytic processes.     

Zeolitic-imidazolate frameworks-derived Co3S4/NiS@Ni foam heterostructure as highly efficient electrocatalyst for oxygen evolution reaction

Transition metals sulfide-based nanomaterials have recently received significant attention as a promising cathode electrode for the oxygen evolution reaction (OER) due to their easily tunable electronic, chemical, and physical properties. However, the poor electrical conductivity of metal-sulfide materials impedes their practical application in energy devices. Herein, firstly nano-sized crystals of cobalt-based zeolitic-imidazolate framework (Co-ZIF) arrays were fabricated on nickel-form (NF) as the sacrificial template by a facile solution method to enhance the electrical conductivity of the electrocatalyst. Then, the Co₃S₄/NiS@NF heterostructured arrays were synthesized by a simple hydrothermal route. The Co-ZIFs derived Co₃S₄ nanosheets are grown successfully on NiS nanorods during the hydrothermal sulfurization process. The bimetallic sulfide-based Co₃S₄/NiS@NF-12 electrocatalyst demonstrated a very low overpotential of 119 mV at 10 mA cm^?2 for OER, which is much lower than that of mono-metal sulfide NiS@NF (201 mV) and ruthenium-oxide (RuO₂) on NF (440 mV) electrocatalysts. Furthermore, the Co₃S₄/NiS@NF-12 electrocatalyst showed high stability during cyclic voltammetry and chronoamperometry measurements. This research work offers an effective strategy for fabricating high-performance non-precious OER electrocatalysts.     

Electroless deposition synthesis of composite catalysts Ni-Fe-P-WO3/NF with superior oxygen evolution performance

The proper construction of high efficiency, low-cost, earth-abundant oxygen evolution reaction (OER) catalyst is essential for hydrogen formation by water splitting. A novel electrocatalyst with highly active OER performance was manufactured by a simple electroless deposition method of Ni-Fe-P-WO₃ on nickel foam (NF). Benefiting from outstanding mass transfer capability of Ni-Fe-P-WO₃/NF heterogeneous structure, abundance of active sites in the amorphous architecture and etc., the Ni-Fe-P-WO₃/NF shows extremely superb electrocatalytic properties compare to noble metal catalyst IrO₂/NF for OER, which needs an overpotential of only 218 mV in 1.0 M KOH solution to achieve the current density of 10 mA cm^?2. It also has remarkable OER activity at high current density that only needs 298 mV to attain 100 mA cm^?2 current density. Moreover, the Ni-Fe-P-WO₃/NF has low Tafel slope of 42 mV dec^?1. This study offers a novel approach to the production of OER multiphase electrocatalysts from oxides and alloys.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Cu2S/Ni3S2 ultrathin nanosheets on Ni foam as a highly efficient electrocatalyst for oxygen evolution reaction

It is an inevitable choice to find efficient and economically-friendly electrocatalysts to reduce the high overpotential of oxygen evolution reaction (OER), which is the key to improve the energy conversion efficiency of water splitting. Herein, we synthesized Cu₂S/Ni₃S₂ catalysts on nickel foam (NF) with different molar ratios of Ni/Cu by a simple two-step hydrothermal method. Cu₂S/Ni₃S₂-0.5@NF (CS/NS-0.5@NF) effectively reduces the overpotential of OER, displaying small overpotentials (237 mV@100 mA cm^?2 and 280 mV@500 mA cm^?2) in an alkaline solution, along with a low Tafel slope of 44 mV dec^?1. CS/NS-0.5@NF also presents an excellent durability at a relatively high current density of 100 mA cm^?2 for 100 h. The excellent performance is benefited by the prominent structural advantages and desirable compositions. The nanosheet has a high electrochemical active surface area and the porous structure is conducive to electrolyte penetration and product release. This work provides an economically-friendly Cu-based sulfide catalyst for effective electrosynthesis of OER.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

AC magnetic field enhancement oxygen evolution reaction of bimetallic metal-organic framework

Cost-effective oxygen evolution reaction (OER) electrocatalysts play a key role in electrocatalytic water splitting process. Here, a facile and scalable strategy was applied to synthesize the bimetallic metal-organic frameworks (MOFs) with high OER activity, and the effects of AC magnetic field on OER was also investigated. Results shows that the bimetallic MOFs (Co_0.4Ni_0.6-MOF-74) exhibited a three-dimensional flower-like morphology, and possessed a higher BET specific area of 905.39 m² g^?1 as well as a smaller median pore size of 0.49 nm as compared to single metal MOFs; It owned a lowest overpotential of 314 mV at 10 mA cm^?2 and Tafel slope of 79.39 mV dec^?1, both are much lower than these of single metal MOFs, being due to the high specific area and more active sites derived from the distorted crystal structure; When AC magnetic field strength equaled to 5.50 mT, overpotential at 10 mA cm^?2 for Co_0.4Ni_0.6-MOF-74 reached minimum value of 201 mV, reduced by about 36% as compared to that without magnetic field, indicated that AC magnetic field could greatly improve OER process. These improvements resulted from the spin polarization effect, magnetohydrodynamic (MHD) convection and improved active point temperature.     

High-efficiency Co6W6C catalyst with three-dimensional ginger-like morphology for promoting the hydrogen and oxygen evolution reactions

Development of electrocatalysts composed of low cost and abundant elements that exhibit catalytic activity comparable to noble metals is important for water splitting. As such, in this study, a catalyst material with a ginger-like morphology consisting of Co₆W₆C is synthesized via a hydrothermal reaction and pyrolysis treatment. The Co₆W₆C catalyst exhibits satisfactory electrochemical properties towards both hydrogen and oxygen evolution reactions in an alkaline electrolyte, with a low overpotential, low Tafel slope, and durable stability. Co₆W₆C possesses a high activity for the hydrogen evolution reaction in alkaline conditions, with an onset potential and overpotential of −0.024 V and 101 mV, respectively, and low Tafel slope of 80.5 mV dec⁻¹ at a current density of 10 mA cm⁻². In addition, Co₆W₆C achieves a current density of 10 mA cm⁻² for the oxygen evolution reaction at an overpotential of only 343 mV. Furthermore, electrochemical stability tests indicate that the Co₆W₆C catalyst maintains 91% of the original current after 60,000 s for the hydrogen evolution reaction and 95% of the original current after 45,000 s for the oxygen evolution reaction. Moreover, electrochemical splitting of water via a two-electrode system employing this catalyst can hold 89% of the initial current after 40,000 s in 1 M KOH.     

Heterostructured Co3O4/VO2 nanosheet array catalysts on carbon cloth for hydrogen evolution reaction

Developing highly efficient, low-cost, and robust water splitting hydrogen production catalysts is critical for hydrogen energy applications. This study presents the synthesis of Co₃O₄/VO₂ heterogeneous nanosheet structures on carbon cloth (Co₃O₄/VO₂/CC). The obtained Co₃O₄/VO₂/CC hybrid catalyst has a low overpotential of 108 mV at a current density of 10 mA cm^?2, a Tafel slope of 98 mV dec^?1, and high stability in 1.0 M KOH for 10 h. The experimental results and density functional theory (DFT) calculations results also show that Co₃O₄ coupled with VO₂ in Co₃O₄/VO₂/CC can optimize hydrogen adsorption energy and facilitate electron transport, thereby accelerating the catalytic kinetics for hydrogen evolution reaction (HER). This work also provided an alternative method to design and construct non-noble metal oxide-based catalysts for alkaline hydrogen production.     

Ir-doped Co3O4 as efficient electrocatalyst for acidic oxygen evolution reaction

Oxygen evolution reaction (OER) is an important bottleneck for large-scale acidic water splitting applications due to its sluggish reaction kinetics. Therefore, the development of highly active, stable, and inexpensive electrocatalysts for OER remains a challenge. Herein, we develop the iridium doped Co₃O₄ (Ir–Co₃O₄) with low Ir content of 2.88 wt% for efficient acidic OER. Considering systemic characterizations, it is probably concluded that Ir can be uniformly doped into the lattice of Co₃O₄ and induce a certain distortion. The electrochemical results reveal that Ir–Co₃O₄ nanoparticles demonstrate significantly enhanced electrocatalytic OER activity and stability in 0.5 M H₂SO₄ solution compared with pure Co₃O₄, in which the overpotential at the current density of 10 mA cm⁻² decreases from 382 mV to 225 mV and the value of Tafel slope decreases from 101.7 mV dec⁻¹ to 64.1 mV dec⁻¹. Besides, Ir–Co₃O₄ exhibits excellent electrocatalytic durability for continuous 130 h's test without any activity attenuation. Moreover, this work provides a kind of high-performance acidic OER electrocatalyst for the development of hydrogen energy.     

Cobalt/cerium-based metal-organic framework composites for enhanced oxygen evolution electrocatalysis

Rational design of multivariate metal-organic framework (MOF)-based electrocatalysts with favorably heterostructures is highly desirable for the oxygen evolution reaction (OER). In this work, we report the rational construction of a series of CoCe-based MOFs (Co_1-xCe_x-BTC, x = 0, 0.1, 0.15 and 0.2) for OER electrocatalysis, and demonstrate the catalytically inactive Ce-BTC as a new OER promoter greatly boosts the electroctalaytic performance of Co-BTC. The resulting Co_0·9Ce_0.1-BTC exhibits the outstanding OER performances with a low overpotential of 308 mV at a current density of 10 mA cm^?2 and a long-term stability within 25 h, which is favorably comparable to those of the commercial IrO₂ and other previously reported MOF-based OER electrocatalysts.     

Bifunctional nanoporous ruthenium-nickel alloy nanowire electrocatalysts towards oxygen/hydrogen evolution reaction

A class of ruthenium-nickel alloy catalysts featured with nanoporous nanowires (NPNWs) were synthesized by a strategy combining rapid solidification with two-step dealloying. RuNi NPNWs exhibit excellent electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in which the RuNi-2500 NPNWs catalyst shows an OER overpotential of 327 mV to deliver a current density of 10 mA cm^?2 and the RuNi-0 NPNWs catalyst requires the overpotential of 69 mV at 10 mA cm^?2 showing the best HER activity in alkaline media. Moreover, the RuNi-1500 NPNWs catalyst was used as the bifunctional electrocatalyst in a two-electrode alkaline electrolyzer for water splitting, which exhibits a low cell voltage of 1.553 V and a long-term stability of 24 h at 10 mA cm^?2, demonstrating that the RuNi NPNWs catalysts can be considered as promising bifunctional alkaline electrocatalysts.