Constructing rod-shaped Co2C/MoN as efficient bifunctional electrocatalyst towards overall urea-water electrolysis

In this paper, Co₂C/MoN/NF at different calcination temperatures (T = 500, 550, 600, 650, 700 °C) was prepared in situ on 3D foam nickel (NF) by hydrothermal treatment and high-temperature calcination. The experimental results show that the sample synthesized at 600 °C (Co₂C/MoN-600/NF) has the best catalytic capacity and the maximum electrochemical active area. For the hydrogen evolution reaction (HER), the potential is only ?176 mV at 100 mA cm^?2, meanwhile, only 1.42 V is needed for urea oxidation reaction (UOR). Furthermore, a two-electrode electrolyze cell of Co₂C/MoN-600/NF6Co₂C/MoN-600/NF was constructed. And the voltage required for overall urea splitting (OUS) is 1.507 V at 50 mA cm^?2, which is 171 mV lower than that of overall water splitting (OWS, 1.678 V). Moreover, the prepared catalyst not only can treat urea in wastewater but also catalyze the production of hydrogen. Therefore, it will be a promising green electrocatalyst.     

Heterostructured Co3O4/VO2 nanosheet array catalysts on carbon cloth for hydrogen evolution reaction

Developing highly efficient, low-cost, and robust water splitting hydrogen production catalysts is critical for hydrogen energy applications. This study presents the synthesis of Co₃O₄/VO₂ heterogeneous nanosheet structures on carbon cloth (Co₃O₄/VO₂/CC). The obtained Co₃O₄/VO₂/CC hybrid catalyst has a low overpotential of 108 mV at a current density of 10 mA cm^?2, a Tafel slope of 98 mV dec^?1, and high stability in 1.0 M KOH for 10 h. The experimental results and density functional theory (DFT) calculations results also show that Co₃O₄ coupled with VO₂ in Co₃O₄/VO₂/CC can optimize hydrogen adsorption energy and facilitate electron transport, thereby accelerating the catalytic kinetics for hydrogen evolution reaction (HER). This work also provided an alternative method to design and construct non-noble metal oxide-based catalysts for alkaline hydrogen production.     

Flower-shaped and sea urchin-shaped structures coexisting in cobalt-based phosphate and oxides achieve efficient electrochemical overall water electrolysis

Active site engineering for electrocatalysts is an essential strategy to improve their intrinsic electrocatalytic capability for practical applications and it is of great significance to develop a new excellent electrocatalyst for overall water splitting. Here, Co₃O₄/nickel foam (NF) and Co₂(P₄O₁₂)/NF electrocatalysts with flower-shaped and sea urchin-shaped structures are synthesized by a simple hydrothermal process and followed by a post-treatment method. Among them, Co₂(P₄O₁₂)/NF shows good catalytic activity for hydrogen evolution reaction (HER), and at the current density of 10 mA cm^?2, the overpotential is only 113 mV Co₃O₄/NF exhibits good catalytic activity for oxygen evolution reaction (OER), and the overpotential is 327 mV at 20 mA cm^?2. An alkaline electrolyzer with Co₃O₄/NF and Co₂(P₄O₁₂)/NF catalysts respectively as anode and cathode displays a current density of 10 mA cm^?2 at a cell voltage of 1.59 V. This work provides a simple way to prepare high efficient, low cost and rich in content promising electrocatalysts for overall water splitting.     

MoS2/NiFeS2 heterostructure as a highly efficient electrocatalyst for overall water splitting at high current densities

Searching for efficient, stable and low-cost nonprecious catalysts for oxygen and hydrogen evolution reactions (OER and HER) is highly desired in overall water splitting (OWS). Herein, presented is a nickel foam (NF)-supported MoS₂/NiFeS₂ heterostructure, as an efficient electrocatalyst for OER, HER and OWS. The MoS₂/NiFeS₂/NF catalyst achieves a 500 mA cm⁻² current density at a small overpotential of 303 mV for OER, and 228 mV for HER. Assembled as an electrolyzer for OWS, such a MoS₂/NiFeS₂/NF heterostructure catalyst shows a quite low cell voltage (≈1.79 V) at 500 mA cm⁻², which is among the best values of current non-noble metal electrocatalysts. Even at the extremely large current density of 1000 mA cm⁻², the MoS₂/NiFeS₂/NF catalyst presents low overpotentials of 314 and 253 mV for OER and HER, respectively. Furthermore, MoS₂/NiFeS₂/NF shows a ceaseless durability over 25 h with almost no change in the cell voltage. The superior catalytic activity and stability at large current densities (>500 mA cm⁻²) far exceed the benchmark RuO₂ and Pt/C catalysts. This work sheds a new light on the development of highly active and stable nonprecious electrocatalysts for industrial water electrolysis.     

Constructing microstructures in nickel-iron layered double hydroxide electrocatalysts by cobalt doping for efficient overall water splitting

The development of Ni–Fe layered double hydroxide (NiFe LDH) catalysts for overall water splitting (OWS) is urgently required. NiFe LDHs are promising catalysts for the oxygen evolution reaction (OER). However, their hydrogen evolution reaction (HER) performance is restricted by slow kinetics. The construction of multiple types of active sites to simultaneously optimise the OER and HER performance is significant for OWS using NiFe LDHs. Hence, a Co-doped NiFe LDH electrocatalyst with dislocations and stacking faults was designed to modulate the electronic structure and generate multiple types of activity sites. The Co_0.03-NiFe_0.97 LDH catalyst only required overpotentials of 280 (50 mA cm⁻², OER) and 170 mV (10 mA cm⁻², HER). However, it reached a current density of 50 mA cm⁻² at 1.53 V during OWS. Co_0.03-NiFe_0.97 LDHs could be stabilised for 140 h at 1.52 V. Furthermore, Co_0.03-NiFe_0.97 LDHs exhibited a higher electrocatalytic activity than commercial Raney nickel and Pt/C||IrO₂ under industrial conditions. The significant specific surface area, high conductivity, and unique microstructures are the major factors contributing to the excellent OWS performance. This study suggests an efficient strategy for introducing microstructures to fabricate catalysts with high activity for application in OWS.     

Synthesis of nest-like porous MnCo–P electrocatalyst by electrodeposition on nickel foam for hydrogen evolution reaction

It is very important to develop hydrogen evolution catalyst with high activity and low cost to solve energy crisis. The abundant non-precious metals and phosphides have attracted much attention and are expected to replace platinum catalysts. Herein, we report an approach to prepare nest-like porous MnCo–P electrocatalyst on the nickel foam by two-step electrodeposition. The prepared bimetallic phosphide MnCo–P₃/NF has excellent hydrogen catalytic activity. In the 1 M NaOH solution, the current density of 10 mA cm^?2 required overpotential is only 47 mV, its Tafel slope is 56.4 mV dec^?1, and the higher current density 100 mA cm^?2 required overpotential is only 112 mV. More importantly, the MnCo–P₃/NF catalyst has a long-term stability of electrocatalytic hydrogen evolution. After 24 h catalytic hydrogen evolution test at a constant current density of 20 mA cm^?2, its potential basically does not change. Furthermore, the current density only changes slightly after 1500 cycles of CV test. All these well prove that the prepared MnCo–P₃/NF catalyst has a long-term hydrogen evolution stability. According to performance testing and morphological characterization, the MnCo–P₃/NF has a high hydrogen catalytic activity and stability are due to its larger active area, lower interface charge transfer resistance and stronger mechanical stability. In summary, the study explores a method of preparing bimetallic phosphides as an efficient and stable hydrogen evolution catalyst.     

Engineering multiphase for activating electroactive sites for highly efficient hydrogen evolution: Experimental and theoretical investigation

An ideal electrocatalyst for the hydrogen evolution reaction of water splitting requires substantial active sites with high catalytic activity, fast electron and mass transfer, low gas adsorption energy, and high stability. However, a single component catalyst usually has only one of the many properties of an ideal electrocatalyst. Herein, for the first time, we synthesize Co_xSe/MoSe₂ micro-prisms on foam via a hydrothermal and selenization strategy. After selenization, a crystallized CoMoO₄ smooth prismatic structure can be converted into a Co_xSe/MoSe₂ prismatic structure with lamellar morphology. Such synergistic effects lead to Co_xSe/MoSe₂ superior electrochemical catalytic activity with a 109 mV over-potential at 10 mA cm⁻² and 204 mV over-potential at 100 mA cm⁻², an appropriate Tafel slope of 90 mV dec⁻¹, and remarkable long-term stability during 20 h of testing for the hydrogen evolution reaction in an alkaline medium. Density-functional calculations reveal the absorption energy of water and Gibbs free-energy of intermediate adsorb hydrogen of Co_xSe/MoSe₂ is more favorable for hydrogen evolution reaction than single component catalyst. Both experimental and theoretical calculation results reveal that synergistic effect can efficiently reduce energy barrier of both the initial water adsorption step and subsequent H₂ generation on binary catalysts, and improve catalytic activity.     

Facile construction of well-defined hierarchical NiFe2O4/NiFe layered double hydroxides with a built-in electric field for accelerating water splitting at the high current density

Interfacial charge redistribution induced by a strong built-in electric field can expertly optimize the adsorption energy of hydrogen and hydroxide for improving the catalytic activity. Herein, we develop a well-defined hierarchical NiFe₂O₄/NiFe layered double hydroxides (NFO/NiFe LDH) catalysts, exhibiting superior performance due to the strong interfacial electric field interaction between NiFe₂O₄ nanoparticle layers and NiFe LDH nanosheets. In 1 M KOH, NFO/NiFe LDH needs 251 mV and 130 to drive 50 and 10 mA cm^?2 for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Moreover, only 1.517 V cell voltage is needed to reach 10 mA cm^?2 towards overall water splitting. Notably, under simulated industrial electrolysis conditions, NFO/NiFe LDH only needs 289 mV to drive 1000 mA cm^?2. This work puts a deep insight into the role of the built-in electric field in transition metal-based catalysts for accelerating water splitting and scalable industrial electrolysis applications.     

Co0.85Se on three-dimensional hierarchical porous graphene-like carbon for highly effective oxygen evolution reaction

Designing an efficient, cheap and abundant catalyst for oxygen evolution reaction (OER) is crucial for the development of sustainable energy sources. A novel catalyst which could be a promising candidate for such electrocatalysts is described. Co_0.85Se supported on three-dimensional hierarchical porous graphene-like carbon (HPG) exhibits outstanding catalytic performances for OER in alkaline medium. It is found that the onset overpotential is 311 mV on the Co_0.85Se/HPG electrode, which is more 28 and 41 mV negative than that on the Co/HPG and Co₃O₄/HPG electrodes. What's more, the value of Tafel slope is 61.7 mV dec⁻¹ and the overpotential at the current density of 10 mA cm⁻² is 385 mV on this electrode. The Co_0.85Se/HPG of this work is an appealing electrocatalyst for OER in basic electrolyte.     

Ru–MoS2@PPy hollow nanowire as an ultra-stable catalyst for alkaline hydrogen evolution reaction

Electrocatalytic hydrogen evolution reaction (HER) is one of the green and effective method to produce clean hydrogen energy. However, the development of non-Pt HER catalysts with excellent catalytic activity and long-term stability still remains a great challenge. Herein, a vertically aligned core-shell structure material with hollow polypyrrole (PPy) nanowire as a core and Ru-doped MoS₂ (Ru–MoS₂) nanosheets as a shell is firstly reported as a highly efficient and ultra-stable catalyst for HER in alkaline solutions. Results indicate that Ru–MoS₂@PPy catalyst demands a low overpotential of 37 mV at 10 mA cm^?2. In addition, the overpotential at 100 mA cm^?2 is 157 mV and it is almost unchanged after 40,000 cyclic voltammetry cycles. The existence of PPy core not only ensures the vertical growth of MoS₂ nanosheets to expose more edge sites, but also promotes the rapid transfer of electrons, contributing to the improvement of catalytic activity. More importantly, the strong interface interaction between MoS₂ and PPy prevents the collapse of the vertical structure of MoS₂ sheets in the electrocatalytic process and greatly enhances the stability of catalysts, which offers an effective strategy to design and synthesize the HER catalysts with superior catalytic stability.     

Spherical Co/Co9S8 as electrocatalyst for hydrogen production from alkaline solution and alkaline seawater

Cobalt-based sulfide catalysts are considered as potential materials for electrocatalytic hydrogen production from seawater. Here, we have successfully prepared a Co/Co₉S₈ electrocatalyst with hollow spherical structure. As-prepared material exhibited excellent electrocatalytic activity in hydrogen evolution reaction (HER) in alkaline seawater. The overpotentials for Co/Co₉S₈ in alkaline seawater were measured as low as 136.2 mV, when reached a current density of 10 mA cm^{− 2}. It also had good stability and could be maintained for 24 h in 1.0 M KOH and alkaline seawater. The results of SEM and TEM confirmed that the catalyst had excellent reaction structure. Due to the hollow structure, Co/Co₉S₈ showed remarkable catalytic performance for HER. The construction method of Co/Co₉S₈ hollow structure is an effective strategy to improve the performance of HER for seawater splitting.     

Controlled synthesis of Mn3O4/Co9S8–Ni3S2 on nickel foam as efficient electrocatalyst for oxygen evolution reaction

Advances in electrochemical interfaces have greatly facilitated the development of new energy systems that can replace traditional fossil fuels. Oxygen evolution reaction (OER) is the core reaction in the new energy conversion system to produce hydrogen. Here, nanorods structure of Mn₃O₄/Co₉S₈–Ni₃S₂/NF-4 was designed and assembled. The Mn₃O₄ has served as an appropriate matrix to build a composite structure with Co₉S₈–Ni₃S₂ to enhance the stability of catalyst. And the introduction of Mn regulated the electronic structure of Ni and Co, which increased the OER activity of matericals. Further characterization and electrochemical testing have suggested that between polymetallic can effectively optimize conductivity and enhance reaction kinetics. Mn₃O₄/Co₉S₈–Ni₃S₂/NF-4 can achieve overpotential of 188 mV at the current density of 10 mA cm^?2 in alkaline solution, with small Tafel slope of 43.2 mV dec^?1 and satisfactory stability of 30 h at 10 mA cm^?2. This work may show a feasible reference in the design of high-efficient OER catalysts.     

One-pot solvothermal synthesis of Co2P nanoparticles: An efficient HER and OER electrocatalysts

Development of an inexpensive electrocatalyst for hydrogen evolution (HER) and oxygen evolution reactions (OER) receives much traction recently. Herein, we report a facile one-pot ethyleneglycol (EG) mediated solvothermal synthesis of orthorhombic Co₂P with particle size ~20–30 nm as an efficient HER and OER catalysts. Synthesis parameters like various solvents, temperatures, precursors ratios, and reaction time influences the formation of phase pure Co₂P. Investigation of Co₂P as an electrocatalyst for HER in acidic (0.5 M H₂SO₄) and alkaline medium (1.0 M KOH), furnishes low overpotential of 178 mV and 190 mV, respectively to achieve a 10 mA cm^?2 current density with a long term stability and durability. As an OER catalyst in 1.0 M KOH, Co₂P shows an overpotential of 364 mV at 10 mA cm^?2 current density. Investigation of Co₂P NP by XPS analysis after OER stability test under alkaline medium confirms the formation of amorphous cobalt oxyhydroxide (CoOOH) as an intermediate during OER process.     

Bifunctional electrocatalysts for water splitting from a bimetallic (V doped-NixFey) Metal–Organic framework MOF@Graphene oxide composite

An ongoing challenge still lies in the exploration of proficient electrocatalysts from earth-abundant non-precious metals instead of noble metal-based catalysts for clean hydrogen energy through large-Scale electrochemical water splitting. However, developing a non-precious transition metals based, stable electrocatalyst for cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER) is important challenge for modern energy conversion technology. In this report Vanadium doped bimetallic nickel-iron nanoarray, fabricated by carbon supported architecture through carbonization process for electrochemical water splitting. Three types of catalysts were prepared in different molar ratio of Ni/Fe. The electrocatalytic performance demonstrated that the catalyst with equal mole ratio (0.06:0.06) of Ni/Fe possess high catalytic activity for both OER and HER in alkaline and acidic medium. Besides, our findings revealed that the doping of vanadium could play a strong synergetic effect with Ni/Fe, which provide a small overpotential of 90 mV and 210 mV at 10 mA cm^?2 for HER and OER respectively compared to the other two catalyst counterparts. Also, the catalyst with 1:1 (Ni/Fe) molar ratio showed a high current density of 208 mA cm^?2 for HER at 0.5 M H₂SO₄ and 579 mA cm^?2 for OER at 1 M KOH solution, the both current densities are much higher than the other two catalysts (different Ni/Fe ratio). In addition, the presented catalysts showed extremely good durability, reflecting in more than 20 h of consistent Chronoamprometry study at fixed overpotential η = 250 mV without any visible voltage elevation. Similarly, the (Ni/Fe) equal ratio catalyst showed better corrosion potential 0.209 V vs Ag/AgCl and lower current density 0.594 × 10^?12 A cm^?2 in high alkaline medium. The V-doping, MOF/GO surface defects are significantly increased the corrosion potential of the V-Ni_xFe_y-MOF/GO electrocatalyst. Besides, the water electrolyzed products were analysed by gas chromatography to get clear insights on the formed H₂ and O₂ products.     

NiCo2O4 nanowire arrays rich in oxygen deficiencies for hydrogen evolution reaction

The rational design of highly efficient electrocatalysts to generate hydrogen by catalyzing hydrogen evolution reaction still remains a challenge. Herein, we report a simple strategy to significantly enhance the catalytic activities of NiCo₂O₄ nanowire arrays by simply tuning the amount of oxygen vacancies. Remarkably, the oxygen-deficient NiCo₂O₄ catalysts obtained in Ar environment show significantly improved catalytic activities toward hydrogen evolution reaction with the requirement of 104 mV overpotential to afford 10 mA cm⁻², 122 mV less than that for air-sintered NiCo₂O₄ (226 mV). Moreover, such catalysts also exhibit superior long-term durability for 24 h at 100 mA cm⁻². The present study further promotes the application of NiCo₂O₄ in other energy storage and conversion system.     

High-efficiency Co6W6C catalyst with three-dimensional ginger-like morphology for promoting the hydrogen and oxygen evolution reactions

Development of electrocatalysts composed of low cost and abundant elements that exhibit catalytic activity comparable to noble metals is important for water splitting. As such, in this study, a catalyst material with a ginger-like morphology consisting of Co₆W₆C is synthesized via a hydrothermal reaction and pyrolysis treatment. The Co₆W₆C catalyst exhibits satisfactory electrochemical properties towards both hydrogen and oxygen evolution reactions in an alkaline electrolyte, with a low overpotential, low Tafel slope, and durable stability. Co₆W₆C possesses a high activity for the hydrogen evolution reaction in alkaline conditions, with an onset potential and overpotential of −0.024 V and 101 mV, respectively, and low Tafel slope of 80.5 mV dec⁻¹ at a current density of 10 mA cm⁻². In addition, Co₆W₆C achieves a current density of 10 mA cm⁻² for the oxygen evolution reaction at an overpotential of only 343 mV. Furthermore, electrochemical stability tests indicate that the Co₆W₆C catalyst maintains 91% of the original current after 60,000 s for the hydrogen evolution reaction and 95% of the original current after 45,000 s for the oxygen evolution reaction. Moreover, electrochemical splitting of water via a two-electrode system employing this catalyst can hold 89% of the initial current after 40,000 s in 1 M KOH.     

Interface engineering of the NiCo2O4@MoS2/TM heterostructure to realize the efficient alkaline oxygen evolution reaction

Electrochemical water splitting is considered as a promising strategy for the efficient hydrogen production, yet it is hindered by the sluggish oxygen evolution reaction (OER). Herein, heterostructure OER catalyst is fabricated by combining MoS₂ nanosheets with NiCo₂O₄ hollow sphere on Ti mesh. Benefiting from the heterogeneous nanointerface between NiCo₂O₄ and MoS₂, this electrocatalyst demonstrates excellent OER activity in basic environment with overpotentials of 313 and 380 mV achieving 10 and 100 mA cm⁻². The superb catalytic performance stems from hollow the nanostructure and interfacial engineering strategy that enhance intrinsic activity and provide faster charge transfer. Hence, this work provides a feasible path for exploiting the high-efficient catalysts.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Efficient MOF- derived V–Ni3S2 nanosheet arrays for electrocatalytic overall water splitting in alkali

The synergistic achievement of low-cost earth-abundant electrocatalysts and high efficiency to meet renewable energy need is highly desirable yet challenging. Here, we developed a simple Ni foam self -templating route for V-doped Ni₃S₂ nanosheet arrays through in situ formation of metal-organic frameworks (MOFs) combined with subsequent conversion. The as-prepared MOF-V-Ni₃S₂/NF catalyst delivers outstanding electrocatalytic performance in the alkaline solution, which requires low overpotentials of 118.1 mV @10 mA cm^?2 and 268 mV @10 mA cm^?2 for hydrogen evolution reaction and oxygen evolution reaction, respectively. The V-doping and MOF-derived 3D hieratical nanostructure play a vital role in the catalytic process, which provides efficient active sites and large surface areas. Furthermore, an alkaline electrolyzer was assembled with two pieces of MOF-V-Ni₃S₂/NF, which achieves efficient water splitting at 1.58 V @10 mA cm^?2. This strategy opens up new channels to synthesize MOF-based bifunctional electrocatalysts toward overall water spitting.     

PBA derived FeCoP nanoparticles decorated on NCNFs as efficient electrocatalyst for water splitting

Transition metal phosphides have been known as promising electrocatalysts for hydrogen evolution and oxygen evolution reactions (HER and OER) due to their high catalytic activity. In this work, the FeCoP nanoparticles decorated on N-doped electrospun carbon nanofibers (FeCoP@NCNFs) was successfully synthesized through depositing Fe, Co-based Prussian blue analogue Co₃[Fe(CN)₆]₂·10H₂O (FeCo-PBA) onto the electrospun PVP/PAN nanofibers via layer-by-layer approach, followed by carbonization and phosphorization treatments. Benefiting from the high electrical conductivity, abundant catalytic active sites and the synergistic effect between FeCoP nanoparticles and N-doped carbon nanofibers network, the obtained FeCoP@NCNFs displays good bifunctional electrocatalytic activity. In 1 M KOH, the FeCoP@NCNFs achieves 10 mA cm^?2 at an overpotential of 290, 226 mV for OER and HER, respectively. Moreover, it demands overpotential of 196 mV to achieve 10 mA cm^?2 for HER in 0.5 M H₂SO₄. The FeCoP@NCNFs is used as both anode and cathode for overall water splitting, it requires a low voltage of 1.65 V to achieve a current density of 10 mA cm^?2 and maintains outstanding stability over 10 h. Herein, a strategy for preparing bifunctional electrocatalysts of compositing transition metal phosphides with carbon nanofibers is proposed, and the application of metal-organic framework in electrocatalytic field is further extended.