Energy and exergy analysis of novel solar bi‐ejector refrigeration system with injector

Energy and exergy balances were done on a novel solar bi‐ejector refrigeration system with R123, whose circulation pump is replaced by an injector. The analysis result of the novel system was compared with that of the original one. The effect of operation condition on system energy efficiency, exergy efficiency and exergy loss was analyzed, and the dynamic performance of a designed solar bi‐ejector refrigeration system was also studied. The comparative results indicate that under the same operating condition, the novel system and the original system have equal energy efficiency, exergy efficiency and exergy loss, and the only difference between them is the exergy losses of the generators and the added injector. The other conclusions mainly include: the solar collector has the largest exergy loss rate of over 90% and for the bi‐ejector refrigeration subcycle, the ejector has the largest exergy loss rate of about 5%; the total exergy loss changes inversely proportional to the evaporation temperature and positively proportional to the condensation temperature; when the other parameters are fixed, there exists an optimum generation temperature, at which the overall energy and exergy efficiencies are both the maximum and the total exergy loss is the minimum. The study points out the direction for optimizing the novel solar bi‐ejector refrigeration system. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of a sustainable multi-generation system with re-compression sCO2 Brayton cycle for hydrogen generation

Current research aims to develop, design, and analyze a novel solar-assisted multi-purpose energy generation system for hydrogen production, electricity generation, refrigeration, and hot water preparation. The suggested system comprises a solar dish for supplying the necessary heat demand, a re-compression carbon dioxide-based Brayton cycle, a PEM electrolyzer for hydrogen generation, an ejector refrigeration system working with ammonia, and a hot water preparation system. The first law and exergy analyses are implemented to determine the performance of the multi-generation plant with various outputs. Besides, the exergo-environmental evaluation of the plant is conducted for the environmental impacts of the plant. Furthermore, parametric analyses are executed for investigating the system outputs, exergy destruction rate, and system efficiencies. According to the results, the rate of hydrogen generated by means of the multi-generation power plant is determined to be 0.062 g/s which corresponds to an hourly production of 0.223 kg. Besides, with the utilization of the supercritical closed Brayton cycle, a power generation rate of 74.86 kW is achieved. Furthermore, the irreversibility of the overall plant is estimated as 535.7 kW in which the primary contributor of this amount is the solar system with a destruction rate of 365.5 kW.     

Utilizing the multi-objective particle swarm optimization for designing a renewable multiple energy system on the basis of the parabolic trough solar collector

Today, to preserve fossil resources, mankind has to search for new ways to respond to its ever-increasing energy needs. In this study, a hybrid system of energy and the use of a parabolic trough solar collector to attract solar radiation was investigated to produce clean electricity, cooling, and hydrogen from thermodynamic and economic aspects. The designed system consisted of a parabolic trough solar collector, organic Rankine cycle, lithium-bromide absorption refrigeration cycle, and proton exchange membrane electrolysis system. The evaporator input temperature, turbine inlet temperature, solar radiation intensity, mass flow rate of collector and parabolic trough collector surface area were set as decision variables and the effect of these parameters on system performance and system exergy loss were investigated. The objective functions of this research were exergy efficiency and cost rate. In order to optimize this system, multi-objective particle swarm optimization algorithm was employed. Optimization results with particle swarm optimization indicated that the best rate of exergy efficiency is 3.12% and the system cost rate is 16.367 US$ per hour, at the same time. The system is capable of producing 15.385 kW power, 0.189 kg/day hydrogen and 56.145 kW cooling in its optimum condition. The results of sensitivity analysis showed that increasing mass flow rate at the collector, temperature at the evaporator inlet, and temperature at the turbine inlet have positive effect on the performance of the proposed system.     

Development and thermodynamic assessment of a novel solar and biomass energy based integrated plant for liquid hydrogen production

In this paper, a combined power plant based on the dish collector and biomass gasifier has been designed to produce liquefied hydrogen and beneficial outputs. The proposed solar and biomass energy based combined power system consists of seven different subplants, such as solar power process, biomass gasification plant, gas turbine cycle, hydrogen generation and liquefaction system, Kalina cycle, organic Rankine cycle, and single-effect absorption plant with ejector. The main useful outputs from the combined plant include power, liquid hydrogen, heating-cooling, and hot water. To evaluate the efficiency of integrated solar energy plant, energetic and exergetic effectiveness of both the whole plant and the sub-plants are performed. For this solar and biomass gasification based combined plant, the generation rates for useful outputs covering the total electricity, cooling, heating and hydrogen, and hot water are obtained as nearly 3.9 MW, 6584 kW, 4206 kW, and 0.087 kg/s in the base design situations. The energy and exergy performances of the whole system are calculated as 51.93% and 47.14%. Also, the functional exergy of the whole system is calculated as 9.18% for the base working parameters. In addition to calculating thermodynamic efficiencies, a parametric plant is conducted to examine the impacts of reference temperature, solar radiation intensity, gasifier temperature, combustion temperature, compression ratio of Brayton cycle, inlet temperature of separator 2, organic Rankine cycle turbine and pump input temperature, and gas turbine input temperature on the combined plant performance.     

Exergy optimization of a novel hydrogen production plant with fuel cell,heat recovery,and MED using NSGAII genetic algorithm

In the current research, 4E analysis and multi-criteria optimization are applied to the poly generation unit for power, heating, refrigeration, and freshwater generation. This system consists of a solid oxide fuel cell (SOFC), multi-effect thermal vapor desalination (MED-TVC), an organic system with ejector refrigeration (OSER), a heat recovery steam generator (HRSG) and a domestic hot water generator. The mathematical simulation is applied to assess the performance of the plant at design conditions and the genetic algorithm finds the optimum operating point with two different scenarios. Parametric analysis and multi-objective optimization are carried out. Findings represent that the developed plant can provide 257.65 kW power, 12.13 kW, 7.44 kW cooling and heating load, and 0.04 kg/s freshwater with a total cost rate of 10.62 $/h. In this case, the plant energy and exergy efficiency is 73.9% and 71.35% respectively. The results of multi-objective optimization show that these values can be improved to 79% and 73.9% respectively. In addition, the plant cost can be reached to 10.07 $/h in this condition.     

Introducing an integrated SOFC,linear Fresnel solar field,Stirling engine and steam turbine combined cooling,heating and power process

A new integrated combined cooling, heating and power system which includes a solid oxide fuel cell, Stirling engine, steam turbine, linear Fresnel solar field and double effect absorption chiller is introduced and investigated from energy, exergy and thermodynamic viewpoints. In this process, produced electrical power by the fuel cell and steam turbines is 6971.8 kW. Stirling engine uses fuel cell waste heat and produces 656 kW power. In addition, absorption chiller is driven by waste heat of the Stirling engine and generates 2118.8 kW of cooling load. Linear Fresnel solar field produces 961.7 kW of thermal power as a heat exchanger. The results indicate that, electrical, energy and exergy efficiencies and total exergy destruction of the proposed system are 49.7%, 67.5%, 55.6% and 12560 kW, respectively. Finally, sensitivity analysis to investigate effect of the different parameters such as flow rate of inputs, outlet pressure of the components and temperature changes of the solar system on the hybrid system performance is also done.     

Thermodynamic and economic assessments and multi-criteria optimization of a novel poly-generation plant using geothermal energy and multi heat recovery technique

Smart use of clean energy sources for achieving higher performance and designing cost-effective systems is recognized as an essential solution for reducing fossil fuel consumption. In this regard, this study supports a comprehensive evaluation and multi-criteria optimization of a novel poly-generation plant embracing geothermal energy from thermodynamic and thermoeconomic perspectives. Hence, the utilization of modified subsystems and smart use of multi heat recovery processes are projected and appraised. In this regard, the plant consists of a double-flash binary geothermal subsystem, an organic Rankine cycle in combination with an ejector refrigeration cycle considering a zeotropic working fluid (a mixture of pentane and R142b), a heating production heat exchanger, and a proton exchange membrane electrolyzer with the combined production of cooling, heating, power, and hydrogen. The crucial thermodynamic and thermoeconomic variables are investigated against key parameters and concluded that the sensitivity of outcomes is more evident with the variation in zeotropic working fluid composition and the vapor quality at the heating production heat exchanger's outlet. The attained results at the optimum mode demonstrated, the energy and exergy efficiencies of the plant as well as total unit costs of products are as being 44.5%, 35.8%, and 18.8 $/GJ, respectively.     

Energy and exergy performance assessment of a novel solar-based integrated system with hydrogen production

In this study, a new solar power assisted multigeneration system designed and thermodynamically analyzed. In this system, it is designed to perform heating, cooling, drying, hydrogen and power generation with a single energy input. The proposed study consists of seven sub-parts which are namely parabolic dish solar collector, Rankine cycle, organic Rankine cycle, PEM-electrolyzer, double effect absorption cooling, dryer and heat pump. The effects of varying reference temperature, solar irradiation, input and output pressure of high-pressure turbine and pinch point temperature heat recovery steam generator are investigated on the energetic and exergetic performance of integration system. Thermodynamic analysis result outputs show that the energy and exergy performance of overall study are computed as 48.19% and 43.57%, respectively. Moreover, the highest rate of irreversibility has the parabolic dish collector with 24,750 kW, while the lowest rate of irreversibility is calculated as 5745 kW in dryer. In addition, the main contribution of this study is that the solar-assisted multi-generation systems have good potential in terms of energy and exergy efficiency.     

A novel combined biomass and solar energy conversion-based multigeneration system with hydrogen and ammonia generation

In the present study, an innovative multigeneration plant for hydrogen and ammonia generation based on solar and biomass power sources is suggested. The proposed integrated system is designed with the integration of different subsystems that enable different useful products such as power and hydrogen to be obtained. Performance evaluation of designed plant is carried out using different techniques. The energetic and exergetic analyses are applied to investigate and model the integrated plant. The plant consists of the parabolic dish collector, biomass gasifier, PEM electrolyzer and hydrogen compressor unit, ammonia reactor and ammonia storage tank unit, Rankine cycle, ORC cycle, ejector cooling unit, dryer unit and hot water production unit. The biomass gasifier unit is operated to convert biomass to synthesis gaseous, and the concentrating solar power plant is utilized to harness the free solar power. In the proposed plant, the electricity is obtained by using the gas, Rankine and ORC turbines. Additionally, the plant generates compressed hydrogen, ammonia, cooling effect and hot water with a PEM electrolyzer and compressed plant, ammonia reactor, ejector process and clean-water heater, respectively. The plant total electrical energy output is calculated as 20,125 kW, while the plant energetic and exergetic effectiveness are 58.76% and 55.64%. Furthermore, the hydrogen and ammonia generation are found to be 0.0855 kg/s and 0.3336 kg/s.     

Comparative performance analysis of solar powered supercritical-transcritical CO2 based systems for hydrogen production and multigeneration

CO₂ based power and refrigeration cycles have been developed and analyzed in different existing studies. However, the development of a CO₂ based comprehensive energy system and its performance analysis have not been considered. In this study, the integration of a CO₂ based solar parabolic trough collector system, a supercritical CO₂ power cycle, a transcritical CO₂ power cycle, and a CO₂ based cascade refrigeration system for hydrogen production and multigeneration purpose is analyzed thermodynamically. This study aims to analyze and compare the difference in the thermodynamic performance of comprehensive energy systems when CO₂ is used as the working fluid in all the cycles with a system that uses other working fluids. Therefore, two comprehensive energy systems with the same number of subsystems are designed to justify the comparison. The second comprehensive energy system uses liquid potassium instead of CO₂ as a working fluid in the solar parabolic trough collector and a steam cycle is used to replace the transcritical CO₂ power cycle. Results of the energy and exergy performance analysis of two comprehensive energy systems showed that the two systems can be used for the multigeneration purpose. However, the use of a steam cycle and potassium-based solar parabolic trough collector increases the comprehensive energy systems’ overall energy and exergy efficiency by 41.9% and 26.7% respectively. Also, the use of liquid potassium as working fluid in the parabolic trough collectors increases the absorbed solar energy input by 419 kW and 2100 kW thereby resulting in a 23% and 90.7% increase in energetic and exergetic efficiency respectively. The carbon emission reduction potential of the two comprehensive energy systems modelled in this study is also analyzed.     

Performance evaluation of a novel CCHP system integrated with MCFC,ISCC and LiBr refrigeration system

This paper proposes a novel combined cooling, heating, and power (CCHP) system integrated with molten carbonate fuel cell (MCFC), integrated solar gas-steam combined cycle (ISCC), and double-effect absorption lithium bromide refrigeration (DEALBR) system. According to the principle of energy cascade utilization, part of the high-temperature waste gas discharged by MCFC is led to the heat recovery steam generator (HRSG) for further waste heat utilization, and the other part of the high-temperature waste gas is led to the MCFC cathode to produce CO₃^2?, and solar energy is used to replace part of the heating load of a high-pressure economizer in HRSG. Aspen Plus software is used for modeling, and the effects of key factors on the system performances are analyzed and evaluated by using the exergy analysis method. The results show that the new CCHP system can produce 494.1 MW of electric power, 7557.09 kW of cooling load and 57,956.25 kW of heating load. Both the exergy efficiency and the energy efficiency of the new system are 61.69% and 61.64%, respectively. Comparing the research results of new system with similar systems, it is found that the new CCHP system has better ability to do work, lower CO₂ emission, and can meet the cooling load, heating load and electric power requirements of the user side at the same time.     

Performance of a dual-purpose solar continuous adsorption system

A conceptual design and performance of a dual-purpose solar continuous adsorption system for domestic refrigeration and water heating is described. Malaysian activated carbon and methanol are used as the adsorbent–adsorbate pair. The heat rejected by the adsorber beds and condensers during the cooling process of the refrigeration part is recovered and used to heat water for the purpose of domestic consumption. In a continuous 24-h cycle, 16.9 MJ/day of heat can be recovered for heating of water in the storage tanks. In the single-purpose intermittent solar adsorption system, this heat is wasted. The total energy input to the dual-purpose system during a 24-h operation is 61.2 MJ/day and the total energy output is 50 MJ/day. The latter is made up of 44.7 MJ/day for water heating and 5.3 MJ/day for ice making. The amount of ice that can be produced is 12 kg/day. Using typical value for the efficiency of evacuated tube collector of water heating system of 65%, the following coefficient of performances (COP's) are obtained: 44% for adsorption refrigeration cycle, 73% for dual-purpose solar water heater, 9.1% for dual-purpose solar adsorption refrigeration and 82.1% for dual-purpose of both solar water heater and refrigerator.     

A parametric study of a renewable energy based multigeneration system using PEM for hydrogen production with and without once-through MSF desalination

The importance of renewable energy compared to fossil fuels is increasing due to growing energy demand and environmental challenges. Multi-generation systems use one or more energy sources and produce several useful outputs. The present study aims at investigating and comparing solar energy based multi-generation systems with and without once-through MSF desalination unit from the thermodynamic point of view. Firstly, hydrogen, electricity, and hot water for space heating and domestic usage are produced using the system, which consists of a parabolic trough collector, an organic Rankine cycle (ORC) and a PEM electrolyzer and heat exchanger as sub-systems. The performance of the entire system is evaluated from the energetic and exergetic points of view. Various parameters affecting hydrogen production rate and efficiency values are also investigated with the thermodynamic model implemented in the Engineering Equation Solver (EES) package. The system can produce hydrogen at a mass flow rate of 20.39 kg/day. The results of the study show that the energy and exergy efficiency values of the ORC are calculated to be 16.80% and 40% while those for the overall system are determined to be 78% and 25.50%, respectively. Secondly, once-through MSF desalination unit is integrated to the system between ORC evaporator and heat exchanger producing domestic hot water in the solar cycle in order not to affect hydrogen production rate while thermodynamic values are compared. Fresh water production capacity of the system is calculated to be at a volumetric flow rate of 5.74 m³/day with 10 stages.     

An exergy analysis of a solar-driven ejector refrigeration system

Exergy analysis is used as a tool to analyse the performance of an ejector refrigeration cycle driven by solar energy. The analysis is based on the following conditions: a solar radiation of 700 W/m², an evaporator temperature of 10 °C, a cooling capacity of 5 kW, butane as the refrigerant in the refrigeration cycle and ambient temperature of 30 °C as the reference temperature. Irreversibilities occur among components and depend on the operating temperatures. The most significant losses in the system are in the solar collector and the ejector. The latter decreases inversely proportional to the evaporation temperature and dominates the total losses within the system. The optimum generating temperature for a specific evaporation temperature is obtained when the total losses in the system are minimized. For the above operating conditions, the optimum generating temperature is about 80 °C.     

Study of a solar powered solid adsorption–desiccant cooling system used for grain storage

A hybrid solar cooling system, which combines the technologies of rotary desiccant dehumidification and solid adsorption refrigeration, has been proposed for cooling grain. The key components of the system are a rotary desiccant wheel and a solar adsorption collector. The former is used for dehumidification and the later acts as both an adsorption unit and a solar collector. The heating load from sunshine can thus be reduced to a greater extent since the solar adsorption collector is placed on the roof of the grain depot. Compared with the solid adsorption refrigeration system alone, the new hybrid system performs better. Under typical conditions, the coefficient of performance of the system is >0.4 and the outlet temperature is <20°C. It is believed that the system can be used widely in the regions with abundant solar resources due to such advantages as environmental protection, energy saving and low operation costs. Additionally, some parameters, for example, ambient conditions, the effectiveness of the heat exchanger and evaporative cooler, mass air-flow rate, etc., which affect system performance, are also analyzed.     

Numerical Simulation of the Performance of a Capillary Thermal Driven Ejector Refrigerator

A capillary driven ejector refrigerator is a new refrigeration system that can use solar energy and other low-grade heat sources. In this paper, the performance of the refrigeration system is simulated numerically by use of an iteration algorithm and block exchanging technology for all unit models. The flow and heat transfer characteristics in a solar collector, generator, ejector, condenser, and evaporator are analyzed and calculated. The results show that when the generating temperature is higher than 75–80°C and the environmental temperature is lower than 35°C, the system can work normally; the coefficient of performance of this refrigeration system is in the range of 0.05–0.15 by use of water as a refrigerant. The cooling capacity and COP increase with an increasing generative temperature and decreasing condensing pressure.     

太阳能喷射式制冷功冷联供系统

以太阳能为驱动热源,基于喷射式制冷和ORC,构建一种太阳能喷射式制冷功冷联供系统,该系统分为太阳能集热子系统和功冷联供子系统两部分。以R161为功冷联供子系统循环工质,通过Matlab建立该系统热力学模型,对其性能进行模拟,在设计工况下该系统制冷量为2.893 kW,净输出功为1.594 kW,功冷联供子系统制冷效率为12.47%,发电效率为6.87%,效率为41.45%。通过分析可知,该系统损占比较大的部件依次为太阳能集热器（73.3%）、发生器（12.14%）、蒸发器（5.03%）和透平（4.81%）。考虑到实际过程,分别研究系统内部参数改变和外部环境参数改变,对系统的影响,发现高低压发生器的温升由利于系统性能的提升,同时环境温度的升高以及太阳辐照度的提升均可改善集热器效率,从而提升系统性能。     

Energy,exergy and economic analyses and multiobjective optimization of a novel solar multi-generation system for production of green hydrogen and other utilities

Renewable energy based multi-generation systems can help solving energy-related environmental problems. For this purpose, a novel solar tower-based multi-generation system is proposed for the green hydrogen production as the main product. A solar-driven open Brayton cycle with intercooling, regeneration and reheat is coupled with a regenerative Rankine cycle and a Kalina cycle-11 as a unique series of power cycles. Significant portion of the produced electricity is utilized to produce green hydrogen in an electrolyzer. A thermal energy storage, a single-effect absorption refrigeration cycle and two domestic hot water heaters are also integrated. Energy, exergy and economic analyses are performed to examine the performance of the proposed system, and a detailed parametric analysis is conducted. Multiobjective optimization is carried out to determine the optimum performance. Optimum energy and exergy efficiencies, unit exergy product cost and total cost rate are calculated as 39.81%, 34.44%, 0.0798 $/kWh and 182.16 $/h, respectively. Products are 22.48 kg/h hydrogen, 1478 kW power, 225.5 kW cooling and 7.63 kg/s domestic hot water. Electrolyzer power size is found as one of the most critical decision variables. Solar subsystem has the largest exergy destruction. Regenerative Rankine cycle operates at the highest energy and exergy efficiencies among power cycles.     

Experimental investigation of solar concentrating collectors in a refrigerant ejector refrigeration machine

This paper presents an experimental study of energy output and efficiency of solar collectors in a refrigerant ejector refrigeration machine using R113 as the refrigerant. Based on a theoretical study, the oil transformer is used as a working fluid in the solar system. The concentrating collectors show encouraging results for operating the system. The maximum collector efficiency was 20%. The system can be used for both cooling and heating purposes. © 1997 John Wiley & Sons, Ltd.     

Component exergy analysis of solar powered transcritical CO<Subscript>2</Subscript> rankine cycle system

In this paper,exergy analysis method is developed to assess a Rankine cycle system,by using supercritical CO2 as working fluid and powered by solar energy.The proposed system consists of evacuated solar collectors,throttling valve,high-temperature heat exchanger,low-temperature heat exchanger,and feed pump.The system is designed for utilize evacuated solar collectors to convert solar energy into mechanical energy and hence electricity.In order to investigate and estimate exergy performance of this system,the energy,entropy,exergy balances are developed for the components.The exergy destructions and exergy efficiency values of the system components are also determined.The results indicate that solar collector and high temperature heat exchanger which have low exergy efficiencies contribute the largest share to system irreversibility and should be the optimization design focus to improve system exergy effectiveness.Further,exergy analysis is a useful tool in this regard as it permits the performance of each process to be assessed and losses to be quantified.Exergy analysis results can be used in design,optimization,and improvement efforts.