Self-standing,hybrid three-dimensional-porous MoS2/Ni3S2 foam electrocatalyst for hydrogen evolution reaction in alkaline medium

Self-standing and hybrid MoS₂/Ni₃S₂ foam is fabricated as electrocatalyst for hydrogen evolution reaction (HER) in alkaline medium. The Ni₃S₂ foam with a unique surface morphology results from the sulfurization of Ni foam showing a truncated-hexagonal stacked sheets morphology. A simple dip coating of MoS₂ on the sulfurized Ni foam results in the formation of self-standing and hybrid electrocatalyst. The electrocatalytic HER performance was evaluated using the standard three-electrode setup in the de-aerated 1 M KOH solution. The electrocatalyst shows an overpotential of 190 mV at ?10 mA/cm² with a Tafel slope of 65.6 mV/dec. An increased surface roughness originated from the unique morphology enhances the HER performance of the electrocatalyst. A density functional approach shows that, the hybrid MoS₂/Ni₃S₂ heterostructure synergistically favors the hydrogen adsorption-desorption steps. The hybrid electrocatalyst shows an excellent stability under the HER condition for 12 h without any performance degradation.     

Synthesis and electrocatalytic activity of Ni0.85Se/MoS2 for hydrogen evolution reaction

Recently, the replacement of expensive platinum-based catalytic materials with non-precious metal materials to electrolyze water for hydrogen separation has attracted much attention. In this work, Ni_0.85Se, MoS₂ and their composite Ni_0.85Se/MoS₂ with different mole ratios are prepared successfully, as electrocatalysts to catalyze the hydrogen evolution reaction (HER) in water splitting. The result shows that MoS₂/Ni_0.85Se with a molar ratio of Mo/Ni = 30 (denoted as M30) has the best catalytic performance towards HER, with the lowest overpotential of 118 mV at 10 mA cm⁻², smallest Tafel slope of 49 mV·dec⁻¹ among all the synthesized materials. Long-term electrochemical testing shows that M30 has good stability for HER over at least 30 h. These results maybe due to the large electrochemical active surface area and high conductivity. This work shows that transition metal selenides and sulfides can form effective electrocatalyst for HER.     

Ni-W nanostructure well-marked by Ni selective etching for enhanced hydrogen evolution reaction

Designing active, stable and affordable electrocatalysts is a promising pathway for fulfilling the mankind's dream of preserving unsustainable fuel sources. Herein, the facile utilization of Romanesco-like and arrow-like nanostructures of Ni-W samples is introduced. Exclusive emphasis is placed on achievement of the unique nanostructure through cost-effective, repeatable and readily accessible two-step techniques, i.e. Ni-W electrodeposition approach followed by etching treatment. Microscopic study was fully utilized for surface morphology and structural investigation. The electrochemical analysis was used to evaluate the electrocatalytic activity and stability. The surface roughness of the Ni-W film electrodeposited by D.C = 90% and etched via acidic solution was up to 93.85, considerably higher than that of the Ni-W electrodeposited by D.C = 20% and without etched Ni-W films (55.36 and 41.51 respectively). Therefore, HER activity was improved with η₁₀ and η₂₀ of 169 and 226 mV vs. RHE, respectively, due to higher effective active surface for H⁺ adsorption. The Tafel slope analysis suggests Volmer mechanism as the HER rate-determining step. The electrochemically active surface area was also enhanced from roughly 2 to 10 cm². In addition, wettability was investigated by a contact angle of less than 65°, which indicates high penetration of electrolyte to the nanostructure. Rapid separation of bubbles on the arrow-like nanostructure of Ni-W films exhibited unstable H₂ bubbles on surface of the electrode.     

Interface engineering of crystalline/amorphous Pt/TeOx nanocapsules for efficient alkaline hydrogen evolution

Hydrogen evolution reaction (HER) is an important process in electrochemical energy technology, and efficient electrocatalysts are of great significance for renewable and sustainable energy conversion. Here, we report a facile hydrothermal and heat treatment process to synthesize a series of Pt-based nanocapsules (NCs) as an effective hydrogen evolution catalyst. The Pt/TeO_x NCs exhibit excellent HER activity in an alkaline medium. The Pt/TeO_x NCs only need the overpotential of 33 mV to achieve the current density of 10 mA cm⁻², and the Tafel slope was as low as 29 mV dec⁻¹, which was even better than that of commercial Pt/C. Detailed experimental characterizations demonstrate that the interface between the crystalline Pt/amorphous TeO_x and the strong electron transfer contribute to alkaline HER activity. This work opens up a new direction for the preparation of efficient catalysts for electrocatalytic reactions or other conversion filed.     

Interfaces engineering of MoNi-based sulfides electrocatalysts for hydrogen evolution reaction in both acid and alkaline media

Searching for efficiently noble-metal-free hydrogen evolution catalysts is critical to the development of hydrogen energy. In this work, we report an in-situ growing defect-rich heterointerfaces structure MoNi-based sulfides on carbon cloth via a facile and controllable hydrothermal process. The interface structure in MoNiS@NiS/CC can not only provide suffcient channel for transportation of electrolyte, but also release of produced gases in the catalytic process, thence enhance the sluggish hydrogen evolution efficiency. Furthermore, the defects in MoNiS@NiS/CC have significant impacts on hydrogen evolution behavior. Therefore, the as-synthesied MoNiS@NiS/CC shows a low overpotential of 33 mV to deliver a current density of 10 mAcm⁻² and a small tafel slope of 80 mVdec⁻¹, and also exhibits an excellent long-term stability in 0.5 M H₂SO₄. Additionaly, the MoNiS@NiS/CC offers outstanding hydrogen evolution reaction performances in 1 M KOH.     

Tunably fabricated nanotremella-like Bi2S3/MoS2: An excellent and highly stable electrocatalyst for alkaline hydrogen evolution reaction

Reasonable design of efficient and stable catalysts with low cost and abundant natural reserves is vital for electrocatalytic water splitting. Herein, novel nanotremella-like Bi₂S₃/MoS₂ composites with different mass ratios between Bi₂S₃ and MoS₂ have been successfully prepared through a hydrothermal approach and further applied to hydrogen evolution reaction (HER) in 1.0 M KOH electrolyte for the first time. When the mass ratio of Bi₂S₃ and MoS₂ is 5:5, as-prepared nanotremella-like Bi₂S₃/MoS₂ (marked as BMS-5) manifests favorable HER catalytic activity with overpotential of 124 mV at current density of 10 mA cm⁻² and relatively low Tafel slope of 123 mV dec⁻¹. Moreover, it exhibits an extraordinary durability for uninterrupted hydrogen generation. The enhanced HER performances are ascribed to the synergistic effects between Bi₂S₃ and MoS₂, giving rise to large electrocatalytic active area and fast HER kinetics. The results pave a new path to design and construct excellent Bi₂S₃/MoS₂ nanomaterials for electrocatalytic hydrogen generation.     

Accelerating photocatalytic hydrogen evolution of Ta2O5/g-C3N4 via nanostructure engineering and surface assembly

Despite that several strategies have been demonstrated to be effective for improving the catalytic hydrogen evolution activity of bulky g-C₃N₄, the large-scale hydrogen production over g–C₃N₄–based photocatalysts still confronts a big challenge. Here, a two-step calcination method is presented in constructing metal oxide/two-dimensional g-C₃N₄, i.e., Ta₂O₅/2D g-C₃N₄ photocatalyst. Thanks to the superiority of the synthetic method, nanostructure engineering forming 2D structure, and surface assembly with another semiconductor, can be realized simultaneously, in which ultrathin structure of 2D g-C₃N₄ and strong interfacial coupling between two components are two important characteristics. As a result, the structure engineered Ta₂O₅/2D g-C₃N₄ induces high photocatalytic hydrogen evolution half reaction rate of ~19,000 μmol g^?1 h^?1 under visible light irradiation (λ > 400 nm), and an external quantum efficiency (EQE) of 25.18% and 12.48% at 405 nm and 420 nm. The high photocatalytic performance strongly demonstrates the advance of the synchronous engineering of nanostructure and construction of heterostructure with tight interface, both of which are beneficial for the fast charge separation and transfer.     

Phosphatizing engineering of heterostructured Rh2P/Rh nanoparticles on doped graphene for efficient hydrogen evolution in alkaline and acidic media

A wide diversity of phosphides of platinum-group metal including Rh, Ru and Ir exhibit intriguing electrocatalytic activity toward hydrogen evolution reaction (HER). The phosphidation degree, namely the P dosage in these phosphides shows pronounced influence on the catalytic performance but is hard to control. In this work we developed a reliable strategy to synthesize Rh₂P-based nanoparticles with controlled phosphidation degree, and investigated the influence of phosphidation degree on HER. It is found that the heterostructured Rh₂P/Rh nanoparticle, i.e., the P-deficient composite with mixed metallic and phosphide phases, outperforms either the metallic Rh or pure Rh₂P nanoparticles. As-synthesized Rh₂P/Rh nanoparticles supported on P/N co-doped graphene (denoted as Rh₂P/Rh-G) display remarkable HER activity with tiny overpotential of 17 and 19 mV at 10 mA cm^?2 current density in alkaline and acid, efficiently surpassing its Rh-based rivals and benchmark Pt/C catalyst. Meanwhile it illustrates a large mass-specific activity (3.23 and 6.26 A mg^?1 @50 mV overpotential in alkaline and acid, respectively) due to its high activity and low metal loading. Density functional theory (DFT) calculation indicates that the Rh₂P/Rh heterostructured interface possesses the optimal close-to-zero value of hydrogen adsorption energy and water dissociation process is accelerated, and thus boosts HER activity.     

Fabrication of robust CoP/Ni2P/CC composite for efficient hydrogen evolution reaction and the reduction of graphene oxide

Developing the novel catalysts with an excellent performance of hydrogen generation is essential to facilitate the application of hydrogen evolution reaction (HER). Herein, a heterostructured cobalt phosphide/nickel phosphide/carbon cloth (CoP/Ni₂P/CC) composite was fabricated via an interfacial engineering strategy to achieve the modification of CoP nanoleaf on Ni₂P nanosheet skeleton supported by carbon cloth. By virtue of the unique heterostructure, abundant exposing active sites and the synergistic coupling effect of CoP and Ni₂P nanoparticles, the elaborated CoP/Ni₂P/CC composite exhibits a robust catalytic property. Among fabricated composites, the optimal CoP/Ni₂P/CC-4 catalyst behaves an excellent HER performance at a wide pH range (overpotentials of 67, 71 and 95 mV to afford 10 mA cm^?2 in 0.5 M H₂SO₄, 1 M KOH and 1 M PBS, respectively). The HER current density of this composite shows a negligible degradation after continuous test for 24 h. Charmingly, the HER process of this catalyst was innovatively applied to reduce graphene oxide, and thus exploiting the fabrication route of reduced graphene oxide (rGO). We are sure that this work will provide a firm guideline for the exploitation of pH-universal HER catalysts and the exploration of HER application.     

Engineering NiCoP/MoxC heterojunction for highly efficient hydrogen evolution reaction in alkaline and acid solution

A hybrid electrocatalyst composed of NiCoP and Mo_xC has been prepared via the two-step calcination method. Microscopic analysis demonstrates that the heterojunctions formed by the NiCoP and Mo_xC are disordered and stacked irregularly. The NiCoP/Mo_xC heterojunctions are produced during the second calcination treatment. The synergistic effects promote water adsorption and dissociation, and H₂ desorption. More active sites are provided by the irregular structure, the NiCoP/Mo_xC-X catalyst are imparted excellent electrocatalytic activity toward hydrogen evolution reaction (HER) activity. To sustain a current density of 10.0 mA/cm², the overpotentials of NiCoP/Mo_xC-15 are 79.0 and 116.0 mV while the Tafel slopes are 52.3 and 57.4 mV/dec for the electrocatalyst operated in 1.0 M KOH and 0.50 M H₂SO₄, respectively. When operating in alkaline medium for 10.0 h at an overpotential of 123.0 mV, the retaining catalytic activity of this material reaches 93.0%.     

Facile synthesis of MoS2/CuS nanoflakes as high performance electrocatalysts for hydrogen evolution reaction

The fabrication of metal sulfides heterostructure is a promising strategy for enhancing catalytic activity. Herein, the MoS₂/CuS heterostructure was successfully grown on carbon cloth (MoS₂/CuS/CC) through an efficient method. The SEM results confirmed that the fabricated MoS₂/CuS/CC composites have a flake morphology, which can not only improves the surface area but also offers ample surface catalytic active sites. Particularly, the optimized MoS₂/CuS/CC-2 electrocatalyst showed a small overpotential of 85 mV@10 mA cm^?2 and exceptional long-term cycling durability for hydrogen evolution in 1 M KOH. The outstanding catalytic activity is attributed to the fact that the combination of MoS₂ with CuS can greatly enhance the charge transport rate and improve the structural stability. These results suggest that the MoS₂/CuS/CC heterostructure is a potential electrocatalyst for hydrogen production.     

Interface engineering of Cu3P/FeP heterostructure as an enhanced electrocatalyst for oxygen evolution reaction

Herein, a strongly coupled Cu₃P/FeP heterostructure with P-doped carbon derived from MIL-101 was synthesized via a three-step method involving solvothermal, carbonization, and phosphidation processes. The Cu₃P/FeP heterostructure serves as a good catalyst because it possesses abundant interfaces between Cu₃P and FeP, which enables the exposure of electrocatalytically active sites and tuning of surface electronic configurations. Additionally, the presence of strong heterointerfaces between Cu₃P and FeP, and the integration of the P-doped carbon guarantee the high electrical conductivity of the catalyst. Benefiting from these advantages, the Cu₃P/FeP electrode exhibited outstanding electrocatalytic activity toward the oxygen evolution reaction (OER), which presents a low overpotential of 315 mV to drive a current density of 10 mA cm⁻² in 1.0 M KOH, thus outperforming that of the state-of-the-art RuO₂. In addition, the Cu₃P/FeP hybrid composite exhibited long-term stability for 50 h. This work provides a new strategy for the design and preparation of transition-metal-based heterostructures and facilitates the development of high-performance energy-related materials.     

Nanocoral-like NiSe2 modified with CeO2: A highly active and durable electrocatalyst for hydrogen evolution in alkaline solution

The excessive exhaustion of conventional fossil fuels and increasingly severe environmental issues prompt us to grope for high-performance and cost-effective catalysts for hydrogen evolution reaction (HER) by electrocatalytic water splitting. In this work, nanocoral-like NiSe₂ catalysts modified with CeO₂ have been successfully prepared through one-pot hydrothermal route and utilized to electrocatalytic HER in alkaline solution. It turns out that nanocoral-like NiSe₂ (labeled as CNS-2) catalyst delivers current densities of 10 and 50 mA cm⁻² at overpotentials of only 130 and 242 mV, respectively. Additionally, CNS-2 takes on a small Tafel slope of 115 mV dec⁻¹ and low charge transfer resistance, revealing a quicker Faradaic process and more favorable HER kinetics. Furthermore, it displays considerable long-term stability during the constant hydrogen producing. The strategy of fabricating NiSe₂ modified with CeO₂ unfolds a novel angle of view for exploiting highly efficient and durable catalysts for electrocatalytic HER.     

3D hierarchical network NiCo2S4 nanoflakes grown on Ni foam as efficient bifunctional electrocatalysts for both hydrogen and oxygen evolution reaction in alkaline solution

The development of cost-effective and high-efficiency electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) still remains highly challenging. Exposing as many active sites as possible is the key method to improve activity of HER and OER performance. In this communication, we demonstrate a novel 3D hierarchical network NiCo₂S₄ nanoflake grown on Ni foam (NiCo₂S₄-NF) as a highly efficient and stable electrochemical catalyst. The NiCo₂S₄-NF exhibits overpotentials as low as 289 and 409 mV at 100 mA cm^?2, superior long-term durability during a 20 h measurement, and a low Tafel slope of 89 and 91 mV dec^?1 for HER and OER in 1.0 M NaOH solution. The outstanding performance is owe to the inherent activity of ultrathin NiCo₂S₄ nanoflakes and the special structure of NiCo₂S₄-NF that can provide a huge number of exposed active sites, accelerate the transfer of electrons, and facilitate the diffusion of electrolyte simultaneously.     

In situ modification of Cu substrate enables nickel-copper phosphide nanoarrays for enhanced electrocatalytic hydrogen evolution

Searching for non-noble and high active electrocatalysts with excellent durability for hydrogen evolution reaction (HER) is significant for hydrogen production but remains a grand challenge. Here, we report a low-temperature oxidation strategy to modify copper foam (CF) and successfully built a heterogeneous NiP₂-Cu₃P nanoarray on the modified CF (NiCuP@CF), in which the CF functions as both conductive support and the precursor of the active substances. The resulting catalyst achieves low overpotentials of 113.4 and 266.4 mV to reach the current density of 10 and 100 mA cm^?2 towards HER in alkaline electrolyte, respectively, benefiting from the 3D heterostructure arrays with abundant active sites and excellent conductivity. The open channels formed spontaneously in the 3D arrays allow rapid H₂ bubbles to escape, which enables the catalyst to exhibit remarkable stability for at least 36 h under different current densities. This work presents a facile and economic modification method for Cu substrate, which will provide a good foundation for the subsequent material optimization, not limited to the heterogeneous metal phosphide catalyst toward HER.     

Vapor-assisted engineering heterostructure of 1D Mo3N2 nanorod decorated with nitrogen-doped carbon for rapid pH-Universal hydrogen evolution reaction

Reasonable construction of heterostructure is of significance yet a great challenge towards efficient pH-universal catalysts for hydrogen evolution reaction (HER). Herein, a facial strategy coupling gas-phase nitridation with simultaneous heterogenization has been developed to synthesize heterostructure of one-dimensional (1D) Mo₃N₂ nanorod decorated with ultrathin nitrogen-doped carbon layer (Mo₃N₂@NC NR). Thereinto, the collaborative interface of Mo₃N₂ and NC is conducive to accomplish rapid electron transfer for reaction kinetics and weaken the Mo–H_ads bond for boosting the intrinsic activity of catalysts. As expected, Mo₃N₂@NC NR delivers an excellent catalytic activity for HER with low overpotentials of 85, 129, and 162 mV to achieve a current density of 10 mA cm^?2 in alkaline, acidic, and neutral electrolytes, respectively, and favorable long-term stability over a broad pH range. As for practical application in electrocatalytic water splitting (EWS) under alkaline, Mo₃N₂@NC NR || NiFe-LDH-based EWS also exhibits a low cell voltage of 1.55 V and favorable durability at a current density of 10 mA cm^?2, even surpassing the Pt/C || RuO₂-based EWS (1.60 V). Consequently, the proposed suitable methodology here may accelerate the development of Mo-based electrocatalysts in pH-universal non-noble metal materials for energy conversion.     

Bi2S3 entrenched BiVO4/WO3 multidimensional triadic photoanode for enhanced photoelectrochemical hydrogen evolution applications

The catalytic reactivity and photoactivity of WO₃ and BiVO₄ oxide semiconductors have general obstacles as electrodes in emergent photo-electrochemical (PEC) hydrogen evolution applications. The present work comprises the integration of photocatalyst with wide visible photon absorption material which is vital for hydrogen evolution in photo-electrocatalytic water splitting. Herein, the 1D WO₃ NWs have been integrated with stable water oxidation photocatalysts of BiVO₄ and Bi₂S₃ as a photoanode (Bi₂S₃/BiVO₄/WO₃) for photoelectrochemical hydrogen evolution reactions. The morphological variations in the Bi₂S₃/BiVO₄/WO₃ heterostructure manifest catalytic activity and rapid charge transfer characteristics owing to band alignment and a wide range of visible photon absorption. The optimized Bi₂S₃/BiVO₄/WO₃ multidimensional photoanode accomplishes a superior photocurrent density of 1.52 mA/cm², a seven-fold higher than pristine WO₃ photoanode counterpart (0.2 mA/cm²) at 1 V vs. RHE. A prodigious lowest onset potential of ?0.01 V vs. RHE) has been achieved which enables very high solar to hydrogen conversion. The photoelectrode with entangled morphology such as nanosheets, nanocrystals and nanorods expanded their surface to volume ratio having enhanced catalytic performance. The hybrid photoanodes have demonstrated the lowest charge transfer resistance of 360 Ohm/cm² with a 7-fold rise in hydrogen evolution performance. The resultant triadic Bi₂S₃/BiVO₄/WO₃ heterostructure appeared to be an emerging stable photo-electro catalyst for hydrogen evolution applications.     

Construction of NiCo2S4/Ni3S2 nanoarrays on Ni foam substrate as an enhanced electrode for hydrogen evolution reaction and supercapacitors

Developing a multifunctional and sustainable electrode material for hydrogen evolution reaction and supercapacitors is a highly feasible avenue for producing the high energy density and renewable energies. In our study, nanostructured NiCo₂S₄/Ni₃S₂/NF nanoarrays are rational developed in experiments via a simple hydrothermal reaction. Ascribed to the 3D nanostructured NiCo₂S₄/Ni₃S₂ with numerous exposure active sites and large contact areas for the electrolyte, the binder-free feature of NiCo₂S₄/Ni₃S₂/NF facilitates a low charge transfer resistance, as well as the synergetic effect of NiCo₂S₄ and Ni₃S₂. The obtained electrocatalyst showed ultrahigh electrocatalytic activity with an overpotential of 111 mV at 10 mA cm⁻² and a Tafel slope of 57 mV dec⁻¹. In addition, the electrode showed an area specific capacity of 6.13 F cm⁻² at 10 mA cm⁻² and superior rate capability (2.72 F cm⁻² at 80 mA cm⁻²), accompanied by excellent cycling stability. This results presented in our work can provide an effective strategy for rational design of other hybrid materials with excellent electrochemical performance in the application of electrocatalysis and supercapacitors.     

One-step synthesis of Ni3S2 nanowires at low temperature as efficient electrocatalyst for hydrogen evolution reaction

Ni₃S₂ is an emerging cost-effective catalyst for hydrogen generation. However, a large amount of reported Ni₃S₂ was synthesized via multi-step approaches and few were fabricated based on the one-step strategies. Herein, we report a facile one-step low-temperature synthesis of Ni₃S₂ nanowires (NWs). In this strategy, a resin containing sulfur element is recommended as a sulfur resource to form Ni₃S₂ NWs. It presents a plausible explanation on the vapor–solid–solid (VSS) growth mechanism according to the results of this experiment and reported in literature that has been published. The Ni₃S₂ NW exhibits a potential ∼199 mV at 10 mA cm⁻² and the long-term durability over 30 h at 20 mA cm⁻² HER operation, better than other reported Ni₃S₂. More importantly, according to replace transition metal foam as the initial metal, other transition metal sulfide can be readily synthesized via this original approach.     

Quaternary-metal phosphide as electrocatalyst for efficient hydrogen evolution reaction in alkaline solution

Hydrogen evolution reaction (HER) is a critical process in electrocatalytic water splitting for hydrogen production. However, the development of low-cost electrocatalysts for highly efficient HER is still a huge challenge. Hence, we fabricate a multi-metal phosphide on Ni foam, FeCoNiNb_xP, through a facile hydrothermal reaction followed by phosphorization. We find that Nb promotes the formation of metal phosphides, and the main phases of the catalysts with Nb are multiphase phosphides. Importantly, the Nb incorporation significantly improves the HER activity of FeCoNiP. We show that FeCoNiNb_0.3P has the best HER activity, which only requires an overpotential of 78 mV to achieve a current density of 10 mA cm^?2 in 1 M KOH, and demonstrates excellent stability under both constant potential and varied current densities. Our findings show that the multiple-metal compounds are beneficial to the improvement of catalytic activity and provide guidance on the design of novel catalysts for applications.