Enhanced hydrogen-storage properties of MgH2 by Fe–Ni catalyst modified three-dimensional graphene

High dehydrogenation temperature and slow dehydrogenation kinetics impede the practical application of magnesium hydride (MgH₂) serving as a potential hydrogen storage medium. In this paper, Fe–Ni catalyst modified three-dimensional graphene was added to MgH₂ by ball milling to optimize the hydrogen storage performance, the impacts and mechanisms of which are systematically investigated based on the thermodynamic and kinetic analysis. The MgH₂+10 wt%Fe–Ni@3DG composite system can absorb 6.35 wt% within 100 s (300 °C, 50 atm H₂ pressure) and release 5.13 wt% within 500 s (300 °C, 0.5 atm H₂ pressure). In addition, it can absorb 6.5 wt% and release 5.7 wt% within 10 min during 7 cycles, exhibiting excellent cycle stability without degradation. The absorption-desorption mechanism of MgH₂ can be changed by the synergistic effects of the two catalyst materials, which significantly promotes the improvement of kinetic performance of dehydrogenation process and reduces the hydrogen desorption temperature.     

Synthesis of low-cost biomass charcoal-based Ni nanocatalyst and evaluation of their kinetic enhancement of MgH2

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH₂ system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂ + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH₂. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH₂ + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H₂ in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH₂ + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH₂, respectively, which indicated that the carbon layer wrapped around MgH₂ effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH₂ + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH₂ formed Mg₂Ni/Mg₂NiH₄ in situ, which act as a “hydrogen pump” to boost the diffusion of hydrogen along with the Mg/MgH₂ interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH₂.     

The enhanced de/re‐hydrogenation performance of MgH2 with TiH2 additive

Catalytic effects of TiH₂ on hydrogenation/dehydrogenation kinetics of MgH₂ were investigated in this study. The TG analysis showed that the addition of the x wt% TiH₂ exhibited lower onset temperature of 160°C which is 100°C and 190°C lower than as‐milled and as‐received MgH₂. The dehydrogenation and hydrogenation kinetics were significantly improved compared with the pure MgH₂. The activation energy for the hydrogen desorption of MgH₂ was reduced from ?137.13 to ?77.58 kJ/mol by the addition of TiH₂. XRD and XPS results showed that the phase of TiH₂ remained same during the dehydrogenation without any intermediate formation confirming its role as catalyst.     

Enhanced hydrogen storage kinetics in Mg@FLG composite synthesized by plasma assisted milling

Mg-based materials as potential hydrogen storage candidates, however, are suffering from sluggish kinetics during absorption and desorption processes. Here in this work, embedding Mg particles on few-layer graphene nanosheets (FLG) via dielectric barrier discharge plasma (DBDP) assisted milling was synthesized to improve hydrogen storage properties of Mg particles. The SEM observation demonstrates that Mg particles are distributed uniformly on the surface of the graphite layer in the Mg@FLG composite. The obtained Mg-based composite (Mg@FLG) shows a hydrogen storage capacity of ～5 wt%. From the isothermal dehydrogenation kinetic curves, the composite could desorb ～4.5 wt% hydrogen within 25 min at 300 °C. Compared with pure Mg, the dehydriding kinetics of the hydrogenated Mg@FLG composite is significantly elevated, showing an activation energy of 155 J/(mol·K). In addition, the dehydrogenation peak temperature of the Mg@FLG decreases dramatically from 431 to 329 °C for MgH₂. This work implies a promising composite formation technique in Mg-based materials to enhance hydrogen storage kinetics.     

CNTs decorated with CoFeB as a dopant to remarkably improve the dehydrogenation/rehydrogenation performance and cyclic stability of MgH2

The chain-like carbon nanotubes (CNTs) decorated with CoFeB (CoFeB/CNTs) prepared by oxidation-reduction method is introduced into MgH₂ to facilitate its hydrogen storage performance. The addition of CoFeB/CNTs enables MgH₂ to start desorbing hydrogen at only 177 °C. Whereas pure MgH₂ starts hydrogen desorption at 310 °C. The dehydrogenation apparent activation energy of MgH₂ in CoFeB/CNTs doped-MgH₂ composite is only 83.2 kJ/mol, and this is about 59.5 kJ/mol lower than that of pure MgH₂. In addition, the completely dehydrogenated MgH₂−10 wt% CoFeB/CNTs sample can start to absorb hydrogen at only 30 °C. At 150 °C and 5 MPa H₂, the MgH₂ in CoFeB/CNTs doped-MgH₂ composite can absorb 6.2 wt% H₂ in 10 min. The cycling kinetics can remain rather stable up to 20 cycles, and the hydrogen storage capacity retention rate is 98.5%. The in situ formation of Co₃MgC, Fe, CoFe and B caused by the introduction of CoFeB/CNTs can provide active and nucleation sites for the dehydrogenation/rehydrogenation reactions of MgH₂. Moreover, CNTs can provide hydrogen diffusion pathways while also enhancing the thermal conductivity of the sample. All of these can facilitate the dehydrogenation/rehydrogenation performance and cyclic stability of MgH₂.     

Catalysis derived from flower-like Ni MOF towards the hydrogen storage performance of magnesium hydride

Herein, a novel flower-like Ni MOF with good thermostability is introduced into MgH₂ for the first time, and which demonstrates excellent catalytic activity on improving hydrogen storage performance of MgH₂. The peak dehydrogenation temperature of MgH₂-5 wt.% Ni MOF is 78 °C lower than that of pure MgH₂. Besides, MgH₂-5 wt.% Ni MOF shows faster de/hydrogenation kinetics, releasing 6.4 wt% hydrogen at 300 °C within 600 s and restoring about 5.7 wt% hydrogen at 150 °C after dehydrogenation. The apparent activation energy for de/hydrogenation reactions are calculated to be 107.8 and 42.8 kJ/mol H₂ respectively, which are much lower than that of MgH₂ doped with other MOFs. In addition, the catalytic mechanism of flower-like Ni MOF is investigated in depth, through XRD, XPS and TEM methods. The high catalytic activity of flower-like Ni MOF can be attributed to the combining effect of in-situ generated Mg₂Ni/Mg₂NiH₄, MgO nanoparticles, amorphous C and remaining layered Ni MOF. This research extends the knowledge of elaborating efficient catalysts via MOFs in hydrogen storage materials.     

Improved hydrogen desorption properties of magnesium hydride with TiFe0.8Mn0.2, graphite and iron addition

The high dehydrogenation temperature of magnesium-based hydride (MgH₂) is still a challenge as a potential hydrogen storage material in automobile applications. To improve the hydrogen desorption properties of MgH₂; we selected TiFe_0.8Mn_0.2, graphite and Fe as additives. We prepared the Mg–graphite, Mg–TiFe_0.8Mn_0.2–Fe, Mg–TiFe_0.8Mn_0.2–graphite, Mg–Fe–graphite and Mg–TiFe_0.8Mn_0.2–Fe–graphite composites with high-energy ball milling under argon atmosphere. We investigated the effects of graphite and Fe addition to the desorption mechanism of TiFe_0.8Mn_0.2 using X-ray diffractometer (XRD), scanning electron microscope, differential scanning calorimeter and pressure-composition-temperature measurements using Sievert apparatus. We observed MgH₂ in Mg–TiFe_0.8Mn_0.2–graphite, Mg–Fe–graphite and Mg–TiFe_0.8Mn_0.2–Fe–graphite with XRD analyses after hydrogenation at 200 °C under a hydrogen pressure of 2.5–2.6 MPa. As compared to pure milled MgH₂ powder, we found that the dehydrogenation peak temperatures are decreased by 90, 160 and 165 °Cfor Mg–TiFe_0.8Mn_0.2–graphite, Mg–Fe–graphite, and Mg–TiFe_0.8Mn_0.2–Fe–graphite composites, respectively. The co-addition of TiFe_0.8Mn_0.2, graphite, and Fe exhibit the synergistic effects in improving the hydrogen desorption properties of MgH₂.     

Improved hydrogen storage properties of MgH2 by the addition of KOH and graphene

Mg hydride is a competitive candidates for hydrogen storage based on its high gravimetric hydrogen capacity and accessibility. In this study, a small amount of KOH and graphene were added into MgH₂ by high energy ball milling. MgH₂ doped with both KOH and graphene has a greatly improved hydrogen storage performance. The existence of graphene and the in-situ formed KMgH₃ and MgO decreased activation energy of MgH₂ to 109.89 ± 6.03 kJ/mol. The both KOH and graphene doped sample has a reversibly capacity of 5.43 wt % H₂ and can released H₂ as much as 6.36 times and 1.84 times faster than those of undoped sample and only KOH doped sample at 300 °C, respectively. The addition of graphene not only can provide more “H diffusion channels”, but also can disperse the catalyst.     

Enhanced hydrogen sorption properties of MgH2 when doped with mechanically alloyed amorphous Zr0·67Ni0.33 particles

In the present study, the effect of amorphous Zr_0·67Ni_0.33 additive containing nano-ZrO₂ on the hydrogen sorption kinetics and thermodynamics of Mg/MgH₂ was investigated. The amorphous Zr_0·67Ni_0.33 particles prepared by mechanical alloying of stoichiometric elements were introduced into MgH₂ powder through high-energy milling to produce a MgH₂/Zr_0·67Ni_0.33 composite. Structural and morphological analyses revealed that the nanostructuring effect of the ZrO₂ containing amorphous Zr_0·67Ni_0.33 has led to significant grain-size refinement of MgH₂ to the nanometric scale. As a result, the MgH₂/Zr_0·67Ni_0.33 composite demonstrates enhanced hydrogenation and dehydrogenation kinetics (4.0 wt%/50 s/250 °C and 5.0 wt%/4 min/325 °C, respectively). Meantime, substantially lowered enthalpies (−63.40 and 67.06 kJ/mol H₂ obtained through pressure-composition-isotherm measurements) and reduced desorption temperature (~270 °C) were observed in the composite as compared to the pure MgH₂, possibly due to the dissolution of Ni into MgH₂ lattice during ball milling.     

Enhanced hydrogen desorption/absorption properties of magnesium hydride with CeF3@Gn

In order to improve the hydrogen storage performance of MgH₂, graphene and CeF₃ co-catalyzed MgH₂ (hereafter denoted as MgH₂+CeF₃@Gn) were prepared by wet method ball milling and hydriding, which is a simple and time-saving method. The effect of CeF₃@Gn on the hydrogen storage behavior of MgH₂ was investigated. The experimental results showed that co-addition of CeF₃@Gn greatly decreased the hydrogen desorption/absorption temperature of MgH₂, and remarkably improved the dehydriding/hydriding kinetics of MgH₂. The onset hydrogen desorption temperature of Mg + CeF₃@Gn is 232 °C，which is 86 °C lower than that of as-milled undoped MgH₂, and its hydrogen desorption capacity reaches 6.77 wt%, which is 99% of its theoretical capacity (6.84 wt%). At 300 °C and 200 °C the maximum hydrogen desorption rates are 79.5 and 118 times faster than that of the as-milled undoped MgH₂. Even at low temperature of 150 °C, the dedydrided sample (Mg + CeF₃@Gn) also showed excellent hydrogen absorption kinetics, it can absorb 5.71 wt% hydrogen within 50 s, and its maximum hydrogen absorption rate reached 15.0 wt% H₂/min, which is 1765 times faster than that of the undoped Mg. Moreover, no eminent degradation of hydrogen storage capacity occurred after 15 hydrogen desorption/absorption cycles. Mg + CeF₃@Gn showed excellent hydrogen de/absorption kinetics because of the MgF₂ and CeH_2-3 that are formed in situ, and the synergic catalytic effect of these by-products and unique structure of Gn.     

Enhancing hydrogen storage properties of the Mg/MgH2 system by the addition of bis(tricyclohexylphosphine)nickel(II) dichloride

This is a first report on the use of the bis(tricyclohexylphosphine)nickel (II) dichloride complex (abbreviated as NiPCy3) into MgH₂ based hydrogen storage systems. Different composites were prepared by planetary ball-milling by doping MgH₂ with (i) free tricyclohexylphosphine (PCy3) without or with nickel nanoparticles, (ii) different NiPCy3 contents (5–20 wt%) and (iii) nickel and iron nanoparticles with/without NiPCy3. The microstructural characterization of these composites before/after dehydrogenation was performed by TGA, XRD, NMR and SEM-EDX. Their hydrogen absorption/desorption kinetics were measured by TPD, DSC and PCT. All MgH₂ composites showed much better dehydrogenation properties than the pure ball-milled MgH₂. The hydrogen absorption/release kinetics of the Mg/MgH₂ system were significantly enhanced by doping with only 5 wt% of NiPCy3 (0.42 wt% Ni); the mixture desorbed H₂ starting at 220 °C and absorbed 6.2 wt% of H₂ in 5 min at 200 °C under 30 bars of hydrogen. This remarkable storage performance was not preserved upon cycling due to the complex decomposition during the dehydrogenation process. The hydrogen storage properties of NiPCy3-MgH₂ were improved and stabilized by the addition of Ni and Fe nanoparticles. The formed system released hydrogen at temperatures below 200 °C, absorbed 4 wt% of H₂ in less than 5 min at 100 °C, and presented good reversible hydriding/dehydriding cycles. A study of the different storage systems leads to the conclusion that the NiPCy3 complex acts by restricting the crystal size growth of Mg/MgH₂, catalyzing the H₂ release, and homogeneously dispersing nickel over the Mg/MgH₂ surface.     

Improved hydrogen storage properties of MgH2 using transition metal sulfides as catalyst

In this study, some transition metal sulfides (TiS₂, NbS₂, MoS₂, MnS, CoS₂ and CuS) are used as catalyst to enhance the hydrogen storage behaviors of MgH₂. The MgH₂-sulfide composites with different sulfides addition are prepared by ball-milling. The phase composition and hydrogen storage properties are studied in detail. The results confirm that all these sulfides can significantly increase the hydrogen desorption and absorption kinetics of MgH₂. The MgH₂–TiS₂ has the best hydrogenation and dehydrogenation kinetics, followed by the MgH₂–NbS₂, MgH₂–MnS, MgH₂–MoS₂, MgH₂–CoS₂, MgH₂–CuS and MgH₂. Also, the onset dehydrogenation temperature of the MgH₂–TiS₂ is about 204 °C, which is lower about 126 °C than that of the MgH₂. The dehydrogenation activation energy can be reduced to 50.8 kJ mol^?1 when doping TiS₂ in MgH₂. The beneficial catalytic effects of the sulfides can be ascribed to the in-situ formation of MgS, TiH₂, NbH, Mo, Mn, Mg₂CoH₅ and MgCu₂ phases.     

Improved hydrogen storage properties of Mg/MgH2 thanks to the addition of nickel hydride complex precursors

In order to improve the hydrogenation/dehydrogenation properties of the Mg/MgH₂ system, the nickel hydride complex NiHCl(P(C₆H₁₁)₃)₂ has been added in different amounts to MgH₂ by planetary ball milling. The hydrogen storage properties of the formed composites were studied by different thermal analyses methods (temperature programmed desorption, calorimetric and pressure-composition-temperature analyses). The optimal amount of the nickel complex precursor was found to be of 20 wt%. It allows to homogeneously disperse 1.8 wt% of nickel active species at the surface of the Mg/MgH₂ particles. After the decomposition of the complex during MgH₂ dehydrogenation, the formed composite is stable upon cycling at low temperature. It can release hydrogen at 200 °C and absorb 6.3 wt% of H₂ at 100 °C in less than 1 h. The significantly enhanced H₂ storage properties are due to the impact of the highly dispersed nickel on both the kinetics and thermodynamics of the Mg/MgH₂ system. The hydrogenation and dehydrogenation enthalpies were found to be of −65 and 63 kJ/mol H₂ respectively (±75 kJ/mol H₂ for pure Mg/MgH₂) and the calculated apparent activation energies of the hydrogen uptake and release processes are of 22 and 127 kJ/mol H₂ respectively (88 and 176 kJ/mol H₂ for pure Mg/MgH₂). The change in the thermodynamics observed in the formed composite is likely to be due to the formation of a Mg_0.992Ni_0.008 phase during dehydrogenation/hydrogenation cycling. The impact of another hydride nickel precursor in which chloride has been replaced by a borohydride ligand, namely NiH(BH₄)(P(C₆H₁₁)₃)₂, is also reported.     

Remarkable kinetics of novel Ni@CeO2–MgH2 hydrogen storage composite

Magnesium hydroxide (MgH₂) has excellent reversibility and high capacity, and is one of the most promising materials for hydrogen storage in practical applications. However, it suffers from high dehydrogenation temperature and slow sorption kinetics. Rare earth hydrides and transition metals can both significantly improve the de/hydrogenation kinetics of MgH₂. In this work, MgH₂–Mg₂NiH₄–CeH_2.73 is in-situ synthesized by introducing Ni@CeO₂ into MgH₂. The unique coating structure of Ni@CeO₂ facilitates homogeneous distribution of synergetic CeH_2.73 and Mg₂NiH₄ catalytic sites in subsequent ball milling process. The as-fabricated composite MgH₂-10 wt% Ni@CeO₂ powders possess superior hydrogenation/dehydrogenation characteristics, absorbing 4.1 wt% hydrogen within 60 min at 100 °C and releasing 5.44 wt% H₂ within 10 min at 350 °C. The apparent activation energy of MgH₂-10 wt% Ni@CeO₂ is determined to be 84.8 kJ/mol and it has favorable hydrogen cycling stability with almost no decay in capacity after 10 cycles.     

Mg-based composites for enhanced hydrogen storage performance

Hydrogen storage in solids of hydrides is advantageous in comparison to gaseous or liquid storage. Magnesium based materials are being studies for solid-state hydrogen storage due to their advantages of high volumetric and gravimetric hydrogen storage capacity. However, unfavorable thermodynamic and kinetic barriers hinder its practical application. In this work, we presented that kinetics of Mg-based composites were significantly improved during high energy ball milling in presence of various types of carbon, including plasma carbon produced by plasma-reforming of hydrocarbons, activated carbon, and carbon nanotubes. The improvement of the kinetics and de-/re-hydrogenation performance of MgH₂ and TiC-catalysed MgH₂ by introduction of carbon are strongly dependent on the milling time, amount of carbon and carbon structure. The lowest dehydrogenation temperature was observed at 180 °C by the plasma carbon–modified MgH₂/TiC. We found that nanoconfinement of carbon structures stabilised Mg-based nanocomposites and hinders the nanoparticles growth and agglomeration. Plasma carbon was found to show better effects than the other two carbon structures because the plasma carbon contained both few layer graphene sheets that served as an active dispersion matrix and amorphous activated carbons that promoted the spill-over effect of TiC catalysed MgH₂. The strategy in enhancing the kinetics and thermodynamics of Mg-based composites is leading to a better design of metal hydride composites for hydrogen storage.     

Solid-state synthesis of amorphous TiB2 nanoparticles on graphene nanosheets with enhanced catalytic dehydrogenation of MgH2

A bi-component catalyst TiB₂/GNSs (GNSs is the abbreviation of graphene nanosheets) is synthesized by a solid-state method. Microstructural characterizations based on SEM (scanning electron microscopy), TEM (transmission electron microscopy) and N₂ physisorption show that the size of TiB₂/GNSs catalyst is at nanoscale (20–30 nm) with a surface area of 84.69 m² g⁻¹. The TiB₂/GNSs nanoparticles ball milled with MgH₂ and exhibit enhanced catalytic effects on the dehydrogenation properties of MgH₂ compares to TiB₂ and GNSs individually. DSC (differential scanning calorimetry) measurements confirm that the peak desorption temperature of MgH₂-5 wt%TiB₂/GNSs composites can be lowered more than 44 °C than the pure as-milled MgH₂. And the dehydrogenation kinetics of TiB₂/GNSs-doped MgH₂ is severalfold acceleration compares to the pure as-milled MgH₂. It is proposed that the TiB₂/GNSs nanoparticles could significantly enhance the intimate interface between TiB₂/GNSs and hydride, therefore, provide more active “catalytic sites” and H “diffusion channels” to reduce the dehydrogenation temperature and improve the dehydrogenation kinetics of MgH₂. The synergistic effect of nano-GNSs and TiB₂ nanoparticles contributes to the highly efficient for dehydrogenation of MgH₂-5wt%TiB₂/GNSs composites.     

Multiple improvements of hydrogen sorption and their mechanism for MgH2 catalyzed through TiH2@Gr

The present investigation reports the effect of TiH₂ templated over graphene (TiH₂@Gr) on the hydrogen sorption characteristics of MgH₂/Mg. The as synthesized TiH₂@Gr leads to significant effect on sorption in MgH₂ by the following effects: the first is dehydrogenation of MgH₂–TiH₂@Gr, which leads to the conversion of some part of TiH₂ into TiH_1.924. TiH₂ together with TiH_1.924 works as a better catalyst than TiH₂ alone. The second is ball-milling of TiH₂@Gr, which produces defective graphene, which also works as co-catalyst. The third is anchoring of TiH₂ on graphene, which does not allow the catalyst to agglomerate. The catalytic effect of TiH₂@Gr on MgH₂ is found to be better than Ti@Gr and TiO₂@Gr. The onset desorption temperature for MgH₂–TiH₂@Gr is ~204 °C, which is 31 °C and 36 °C lower than MgH₂–Ti@Gr, MgH₂–TiO₂@Gr respectively. The better catalytic behavior of TiH₂@Gr also persists during de/re-hydrogenation kinetics and cycling study of MgH₂. The feasible mechanism for superior catalytic for TiH₂@Gr on MgH₂ has been put forward.     

Excellent catalysis of MoO3 on the hydrogen sorption of MgH2

To improve the hydrogen sorption kinetics of MgH₂, the MoO₃ nanobelts were added into MgH₂ by mechanical milling, leading to fine distribution of MoO₃ in the MgH₂ matrix. Compared to uncatalyzed MgH₂, the hydriding and dehydriding rates of MoO₃-catalyzed MgH₂ were significantly improved. The MgH₂ doped with 2 mol% MoO₃ exhibited fast dehydrogenation without activation, and the initial dehydrogenation amount of 5 wt% could be reached within 900 s at 300 °C. The dehydrogenation apparent activation energy is decreased down to 114.7 kJ/mol. The excellent catalytic effect of MoO₃ originates from its specific role as fast hydrogen diffusion pathways. In the hydrogenation process, the MoO₃ transformed to MoO₂, resulting in the fading of catalytic activity.     

Synergistic enhancement of hydrogen storage properties in MgH2 using LiNbO3 catalyst

Extensive researches are being conducted to improve the high dehydrogenation temperature and sluggish hydrogen release rate of magnesium hydride (MgH₂) for better industrial application. In this study, LiNbO₃, a catalyst composed of alkali metal Li and transition metal Nb, was prepared through a direct one-step hydrothermal synthesis, which remarkably improved the hydrogen storage performance of MgH₂. With the addition of 6 wt% LiNbO₃ in MgH₂, the initial dehydrogenation temperature decreases from 300 °C to 228 °C, representing a drop of almost 72 °C compared to milled MgH₂. Additionally, the MgH₂-6 wt.% LiNbO₃ composite can quickly release 5.45 wt% of H₂ within 13 min at 250 °C, and absorbed about 3.5 wt% of H₂ within 30 min at 100 °C. It is also note that LiNbO₃ shows better catalytic effect compared to solely adding Li₂O or Nb₂O₅. Furthermore, the activation energy of MgH₂-6 wt.% LiNbO₃ decreased by 44.37% compared to milled MgH₂. The enhanced hydrogen storage performance of MgH₂ is attributed to the in situ formation of Nb-based oxides in the presence of LiNbO₃, which creates a multielement and multivalent chemical environment.     

Enhanced hydrogen absorption and desorption properties of MgH2 with graphene and vanadium disulfide

Magnesium hydride (MgH₂) is the most prominent carrier for storing hydrogen in solid-state mode. However, their slow kinetics and high thermodynamics become an obstacle in hydrogen storage. The present study elaborates on the catalytic effect of graphene (Gr) and vanadium disulfide (VS₂) on MgH₂ to enhance its hydrogen sorption kinetic. The temperature-programmed desorption study shows that the onset desorption temperature of MgH₂ catalyzed by VS₂ and MgH₂ catalyzed by Gr is 289 °C and 300 °C, respectively. These desorption temperatures are 87 °C and 76 °C lower than the desorption temperature of pristine MgH₂. The rapid rehydrogenation kinetics for the MgH₂ catalyzed by VS₂ have been found at a temperature of 300 °C under 15 atm H₂ pressure by absorbing ∼4.04 wt% of hydrogen within 1 min, whereas the MgH₂ catalyzed by Gr takes ∼3 min for absorbing the same amount of hydrogen under the similar temperature and pressure conditions. The faster release of hydrogen was also observed in MgH₂ catalyzed by VS₂ than MgH₂ catalyzed by Gr and pristine MgH₂. MgH₂ catalyzed by VS₂ releases ∼2.54 wt% of hydrogen within 10 min, while MgH₂ catalyzed by Gr takes ∼30 min to release the same amount of hydrogen. Furthermore, MgH₂ catalyzed by VS₂ also persists in the excellent cyclic stability and reversibility up to 25 cycles.