Light metal functionalized two-dimensional siligene for high capacity hydrogen storage: DFT study

In this work, the hydrogen storage capacities of two-dimensional siligene (2D-SiGe) functionalized with alkali metal (AM) and alkali-earth metal (AEM) atoms were studied using density functional theory calculations. One AM (Li, Na, K) or AEM (Be, Mg, Ca) atom was placed on the 2D-SiGe surface, and several H₂ molecules were placed in the vicinity of the adatom. The results demonstrate that the most favorable siligene site for the adsorption of Li, Na, K and Be atoms is the hollow site, while for the Mg and Ca atoms is the down site. The AM atoms are the only ones with considerable binding energies on the SiGe nanosheets. Pristine 2D-SiGe slightly adsorbs one H₂ molecule per hollow site and, therefore, it is not suitable for hydrogen storage. In some of the AM- and AEM-decorated 2D-SiGe, several hydrogen molecules can be physisorbed. In particular, the Na-, K- and Ca-functionalized 2D-SiGe can adsorb six hydrogen molecules, whereas Li and Mg atoms adsorbed three hydrogen molecules, and the Be adatom only adsorbed one hydrogen molecule. The complexes formed by hydrogen molecules adsorbed on the analyzed metal decorated 2D-SiGe are energetically stable, indicating that functionalized 2D-SiGe could be an efficient molecular hydrogen storage media.     

Ca-decorated borophene as potential candidates for hydrogen storage: A first-principle study

Based on density functional theory calculation, we have investigated the hydrogen storage properties of three types of Ca-decorated borophene which have been recently synthesized experimentally. It is found that Ca atoms have strong bonding strength with borophene without the problem of aggregation. The configuration of borophene has an important effect on the H₂ storage capacity. Ca-decorated borophene of S2 and S3 are promising materials system for high-capacity hydrogen storage with gravimetric hydrogen density 9.5 wt% and 7.2 wt% while that of S1 are not. Not only the polarization mechanism but also the orbital hybridization are involved in the adsorption of H₂. The temperature and pressure have also been taken into consideration. All the hydrogen adsorbed structures of S2 and S3 are stable at room temperature under mild pressure. Our results indicate that Ca-decorated borophene of S2 and S3 structures could be expected to be promising H₂ storage materials for H₂ fuel battery.     

Selective decorating of BC3 and C3N nanosheets with single metal atom for hydrogen storage

Employing first-principles calculations, we have studied the structure, stability and hydrogen storage efficiency of pristine and defective BC₃ and C₃N monolayer functionalized by a variety of single metal adatoms. It is found that single Sc adatom, acting as an optimal dopant on perfect BC₃ monolayer, is able to adsorb up to nine H₂ molecules as strongly as around 0.24 eV/H₂, which allows for a hydrogen storage capacity of 7.19 wt% for Sc atoms stably adsorbing on double sides of BC₃ monolayer with eighteen H₂ molecules (18H₂@2Sc/BC₃). Moreover, the desorption temperature and thermodynamical stability of multiple H₂ adsorbed Sc-decorated BC₃ sheet have been addressed and the saturate configuration of 18H₂@2Sc/BC₃ is predicted to be stable at mild temperatures and pressures, i.e. less than 250 K at 1 bar, or larger than 24 bar at room temperature. This study indicates that the Sc-decorated BC₃ monolayer could be a potential H₂ storage candidate, and provides an instructive guidance for designing metal-functionalized carbon-based sheets in hydrogen storage.     

Hydrogen adsorption and storage behaviors of Li-decorated PdS2 monolayer: An extended tight-binding study based on DFT

The hydrogen adsorption and storage of the lithium-decorated PdS₂ monolayer at nano-size has been investigated by using extended tight-binding (GFN1-xTB) based on density functional theory (DFT). The calculation results demonstrate that the average adsorption energies of 1–5H₂ change in 0.47–0.20 eV/H₂ range which decreases with increasing of adsorbed hydrogen molecule number. The gravimetric density for hydrogen storage adsorption with 12Li atom and 60H₂ molecules of Li-decorated PdS₂ monolayer is about 6.98 wt% considered as possible application in hydrogen storage. The examination of the hydrogen store mechanism between the monolayer and hydrogen molecules is presented by polarization between Pd and H₂, which can be effect on the adsorption behavior.     

Calcium-decorated graphdiyne as a high hydrogen storage medium: Evaluation of the structural and electronic properties

Graphdiyne (GDY) is a new member of carbon allotropes consisting of sp and sp² hybridized carbon atoms. In this work, the hydrogen adsorption on Calcium (Ca) decorated GDY and the influence of adatom on structural properties of GDY are investigated, using first principles plane wave calculations with Van der Waals corrections. The results show that similar to graphyne (GY) and unlike carbon nanotube (CNT), fullerene and graphene, clustering of Ca on GDY hinders due to the higher binding energy of the adatom to the carbon frame than the Ca cohesive energy. It can be seen that the Ca-decoration promotes hydrogen storage capacity of GDY, extremely (E_ads = ?0.266 and ?0.066 eV for Ca-decorated and pristine GDY, respectively). It is concluded that, the best site for the Ca trapping is 18-membered ring in which, Ca lies in-plane of GDY (E_ads = ?3.171 eV). Fourteen H₂ molecules (with the average adsorption energy of ～0.2 eV/H₂) can be adsorbed on the Ca atom from one side. The hydrogen storage capacity is estimated to be as high as 17.95 wt% for the both sides of GDY. So, the Ca-decorated GDY is offered as a promising candidate for hydrogen storage applications.     

First-principles hydrogen adsorption properties of Li-decorated ThMoB4-type graphene

The hydrogen storage (1–10H₂) properties of single- and double-side lithium decorated ThMoB₄-type graphene (Li/ThMoB₄C) are systematically investigated by density functional first-principles calculations within Dmol³ package. After well-converged geometry optimizations, it is found that the binding energy of Li adatom is higher enough, and there is no adatom clustering. The average adsorption energies of 1–6 H₂ deviate in 0.20–0.27 eV/H₂ range, which is providing a convenient physical adsorption-desorption cycle. A detailed examination of the binding mechanism between the constituents of the H₂ adsorbed Li-decorated systems is presented by density of states, Mulliken charge analysis, electron density and density difference calculations. For further decoration and adsorption with 12Li adatom and 72H₂ molecules, the computation yields a high gravimetric density of 14.5 wt % with the acceptable adsorption energy. In this way, it is concluded that Li/ThMoB₄ system can be considered as a promising hydrogen storage medium.     

Tin carbide monolayers decorated with alkali metal atoms for hydrogen storage

In this work, a density-functional study of hydrogen storage in tin carbide monolayers (2DSnC) decorated with alkali metals atoms (AM) such as Li, Na, and K, is reported. The most stable adsorption site for these alkali metal atoms on the 2DSnC is above a tin atom. The results indicate that the alkali metal atoms are chemisorbed on the 2DSnC and that electronic charge is transferred from the decorating atom to the 2DSnC. In all the studied cases, the hydrogen molecules are physisorbed on the AM-2DSnC (AM = Li, Na, and K) complexes and then these systems could be used for hydrogen storage. In particular, it is found that the K-2DSnC monolayer has the highest hydrogen-storage capacity, where a single potassium atom can adsorb up to 6 hydrogen molecules, followed by Na-2DSnC with 5 hydrogen molecules and Li-2DSnC with 3 hydrogen molecules. Finally, it can be estimated that when the K, Na and Li adatom-coverings respectively attain 40%, 44% and 70%, the hydrogen-storage gravimetric capacities of AM-2DSnC could overcome the US-DOE recommended target of 5.5 wt% for onboard automotive systems.     

Hydrogen storage capacity and reversibility of Li-decorated B4CN3 monolayer revealed by first-principles calculations

This work explored the feasibility of Li decoration on the B₄CN₃ monolayer for hydrogen (H₂) storage performance using first-principles calculations. The results of density functional theory (DFT) calculations showed that each Li atom decorated on the B₄CN₃ monolayer can physically adsorb four H₂ molecules with an average adsorption energy of ?0.23 eV/H₂, and the corresponding theoretical gravimetric density could reach as high as 12.7 wt%. Moreover, the H₂ desorption behaviors of Li-decorated B₄CN₃ monolayer at temperatures of 100, 200, 300 and 400 K were simulated via molecular dynamics (MD) methods. The results showed that the structure was stable within the prescribed temperature range, and a large amount of H₂ could be released at 300 K, indicative of the reversibility of hydrogen storage. The above findings demonstrate that the Li-decorated B₄CN₃ monolayer can serve as a favorable candidate material for high-capacity reversible hydrogen storage application.     

C7N6 monolayer as high capacity and reversible hydrogen storage media: A DFT study

Searching advanced materials with high capacity and efficient reversibility for hydrogen storage is a key issue for the development of hydrogen energy. In this work, we studied systematically the hydrogen storage properties of the pure C₇N₆ monolayer using density functional theory methods. Our results demonstrate that H₂ molecules are spontaneously adsorbed on the C₇N₆ monolayer with the average adsorption energy in the range of 0.187–0.202 eV. The interactions between H₂ molecules and C₇N₆ monolayer are of electrostatic nature. The gravimetric and volumetric hydrogen storage capacities of the C₇N₆ monolayer are found to be 11.1 wt% and 169 g/L, respectively. High hardness and low electrophilicity provides the stabilities of H₂–C₇N₆ systems. The hydrogenation/dehydrogenation (desorption) temperature is predicted to be 239 K. The desorption temperatures and desorption capacity of H₂ under practical conditions further reveal that the C₇N₆ monolayer could operate as reversible hydrogen storage media. Our results thus indicate that the C₇N₆ monolayer is a promising material with efficient, reversible, and high capacity for H₂ storage under realistic conditions.     

Computational evaluation of Ca-decorated nanoporous CN monolayers as high capacity and reversible hydrogen storage media

Developing novel materials with high-capacity and reversible properties for storing hydrogen (H₂) is crucial for energy treatments. We here investigated comprehensively the H₂ storage performance of the Ca-decorated g-CN (Ca@CN) monolayers using first-principles calculations. The Ca atoms can be uniformly decorated into the center of the pores of g-CN monolayers without aggregation. The Ca@CN monolayer has an average H₂ adsorption energy of around 0.163–0.228 eV as well as high H₂ storage capacity of 10.1 wt%. The stabilities of the H₂ adsorption systems are confirmed by high hardness and low electrophilicity. The temperature of desorption is anticipated to be near the room temperature and ideal for fuel cell devices. The thermodynamic analysis along with desorption temperature reveal that the Ca@CN monolayer has promising potentials as reversible and high capacity hydrogen storage materials (HSM), which will motivate experimental efforts to synthesize the high-efficient HSM.     

An effective method to screen carbon (boron,nitrogen) based two-dimensional hydrogen storage materials

The current critical environmental pollution caused by the huge fossil fuel burning together with the increasingly scarce energy source has inspired much attention on the renewable clean hydrogen energy. Thus, the hydrogen storage materials are very vital for the hydrogen application and will be screened by the high-throughput computational screening procedure in this paper. Generally, metal-modified carbon (boron, nitrogen) nanomaterials can exhibit excellent hydrogen storage capacities. An effective procedure is designed to screen the potential metal decorated carbon (boron, nitrogen) hydrogen storage materials from the Materials Project database, which can be proved to be easily realized and reliable. Totally six ideal structures are obtained for hydrogen storage by considering the thermodynamic stability, the metal decorating, the theoretical hydrogen gravimetric density larger than 5.5 wt%, the PBE band gap smaller than 1.0 eV, and the two-dimensional structure restriction. Furthermore, the binding energy of the metal atom to the screened 2D materials, the average adsorption energy per H₂ adsorbed by the metal, the density of states, the difference charge densities are calculated by the density functional method. We believe that our screening procedure can effectively and accurately search for hydrogen storage materials, which should be the theoretical basis for experimental researches.     

Effect of boron substitution on hydrogen storage in Ca/DCV graphene: A first-principle study

By using density functional calculations, the effects of boron are investigated in the new hydrogen storage systems, which are formed by substituting different numbers of boron atoms to the first (BDDCV-F) and the second (BDDCV-S) neighbor of double carbon-vacancy (DCV). The layered host systems of boron-substituted DCV graphene are decorated with Ca metal to increase the number of adsorbed H₂ molecules. Storing of H₂ applications are performed by using two coordinate algorithms as CLICH (Cap-Like Initial Conditions for Hydrogens) and RICH (Rotational Initial Conditions for Hydrogens). The adsorption properties of (1–14) H₂ molecules on the constructed systems are examined. The results for BDDCV-F and BDDCV-S boron-doped systems are compared with each other and those of the pure-DCV graphene. To compare the stabilities of BDDCV-systems, the formation energies are calculated. It is concluded from Mulliken charge analysis, the partial density of states and electron density differences that boron substitution process to different locations of the DCV graphene plays a crucial role on the charge transfer between Ca atom the layered host system, ionic nature and the binding properties of the systems. The herringbone-like anisotropic electron density is transformed to isotropic density with the substitution of the boron atoms. Then, the electric field, which is induced by ionic interactions and governs H₂ adsorption processes, is changed and intensified along with the sheet. In this way, it can be achieved more effective H₂ adsorption. It is seen from the adsorption energies of single- and double-side Ca-decorated systems that the processes of boron-substitution and Ca-decoration can considerably improve the hydrogen storage capability of pure-DCV graphene system, thus (8 and 10)H₂ can be adsorbed per Ca-atom in these-type systems. The high gravimetric density of 5.80% is calculated, although larger cell and empty surface states. Moreover, the average desorption temperatures are calculated by using van't Hoff equation, and it is seen that the DCV including boron-substituted systems have closer desorption temperatures to the room temperature than pure-DCV. To check the H₂ desorption of the systems, molecular dynamics simulations are performed at 200 K and 300 K temperatures.     

Li-decorated B2O as potential candidates for hydrogen storage: A DFT simulations study

Two-dimensional (2D) B₂O monolayer is considered as a potential hydrogen storage material owing to its lower mass density and high surface-to-volume ratio. The binding between H₂ molecules and B₂O monolayer proceeds through physisorption and the interaction is very weak, it is important to improve it through appropriate materials design. In this work, based on density functional theory (DFT) calculations, we have investigated the hydrogen storage properties of Lithium (Li) functionalized B₂O monolayer. The B₂O monolayer decorated by Li atoms can effectively improve the hydrogen storage capacity. It is found that each Li atom on B₂O monolayer can adsorb up to four H₂ molecules with a desirable average adsorption energy (E_ave) of 0.18 eV/H₂. In the case of fully loaded, forming B₃₂O₁₆Li₉H₇₂ compound, the hydrogen storage density is up to 9.8 wt%. Additionally, ab initio molecular dynamics (AIMD) calculations results show that Li-decorated B₂O monolayer has good reversible adsorption performance for H₂ molecules. Furthermore, the Bader charge and density of states (DOS) analysis demonstrate H₂ molecules are physically absorbed on the Li atoms via the electrostatic interactions. This study suggests that Li-decorated B₂O monolayer can be a promising hydrogen storage material.     

Yttrium-decorated C48B12 as hydrogen storage media: A DFT study

We report a density functional theory calculation dedicated to analyze the behavior of hydrogen adsorption on Yttrium-decorated C₄₈B₁₂. Electron deficient C₄₈B₁₂ is found to promote charge transfer between Y atom and substrate leading to an enhanced local electric field which can significantly improve the hydrogen adsorption. The analysis shows that Y atoms can be individually adsorbed on the pentagonal sites without clustering of the metal atoms, and each Y atom can bind up to six H₂. molecules with an average binding energy of −0.46 eV/H₂, which is suitable for ambient condition hydrogen storage. The Y atoms are found to trap H₂ molecules through well-known “Kubas-type” interaction. Our simulations not only clarify the mechanism of the reaction among C₄₈. B₁₂, Y atoms and H₂ molecules, but also predict a promising candidate for hydrogen storage application with high gravimetric density (7.51%).     

A first principles study of hydrogen storage in lithium decorated defective phosphorene

In this study, we studied defect-engineering and lithium decoration of 2D phosphorene for effective hydrogen storage using density functional theory. Contrary to graphene, it is found that the presence of point-defects is not preferable for anchoring of H₂ molecules over defective phosphorene. According to previous research, strategies such as defect engineering, metal decoration, and doping enhance the hydrogen storage capacity of several 2D materials. Our DFT simulations show that point defects in phosphorene do not improve the hydrogen storage capacity compared to pristine phosphorene. However, selective lithium decoration over the defective site significantly improves the hydrogen adsorption capacity yielding a binding energy of as high as ?0.48 eV/H₂ in Li-decorated single vacancy phosphorene. Differential charge densities and projected density of states have been computed to understand the interactions and charge transfer among the constituent atoms. Strong polarization of the H₂ molecule is evidenced by the charge accumulation and depletion. The PDOS shows that the presence of Li leads to enhanced charge transfer. The maximum gravimetric density was investigated by sequentially adding H₂ molecules to the Li-decorated single vacancy defective phosphorene. The Li-decorated single vacancy phosphorene is found to possess a gravimetric density of around 5.3% for hydrogen storage.     

Metal adatoms-decorated silicene as hydrogen storage media

Hydrogen storage properties of 10 different adatom decorated silicene are carried out using density functional theory calculations with long-range van der Waals dispersion correction. It is found that the binding energy between metal adatoms and the silicene is greater than the cohesive energy of bulk metal so that clustering of adatom will not occur once it is bonded with silicene. The adsorption of H₂ on Li, Na, K, Mg, Ca, and Au decorated silicene is a weak physisorption. Differently, a weaker chemisorption is responsible for the adsorption of H₂ on Be, Sc, Ti, and V decorated silicene. In particular, silicene with Na, K, Mg, and Ca decorating on both sides leads to 7.31–9.40 wt% hydrogen storage capacity with desirable adsorption energy, indicating that the metal-decorated silicene can serve as a high capacity hydrogen storage medium.     

The reversible hydrogen storage abilities of metal Na (Li,K, Ca,Mg, Sc,Ti, Y) decorated all-boron cage B28

The density functional theory is used to study the hydrogen storage abilities of alkali metal Li (Na, K), alkaline-earth metal Mg (Ca), and transition metal Ti (Ti, Sc, Y) decorated B₂₈, which is the possible smallest all-boron cage and contains one hexagonal hole and two octagonal holes. The most stable structure of B₂₈ explored by the calypso search is as same as that explored by Zhao et al. [Nanoscale 7(2015)15086]. It is calculated that the hollow sites outside of the cavities should be the most stable for all metals except for Ti. The average adsorption energy of H₂ molecules (E_ad) adsorbed by each Na (Ca, K, Mg, Sc, Y and Li) atom outside of the B₂₈ cage are in the range from 0.2 to 0.6 eV, which is suitable for hydrogen storage under near-ambient conditions. However, the largest hydrogen gravimetric density (HGD) for the B₂₈Sc₃-12H₂ structure is smaller than the target of 5.5 wt% by the year 2017 specified by the US Department of Energy (DOE). Therefore, the metal Ti (Sc) decorated all-boron cage B₂₈ should not be good candidates for hydrogen storage. The calculated desorption temperature and the molecular dynamic simulation indicate that the B₂₈M₃-nH₂ (M = Na, Li, Ca, K, Mg, Y) structures are easy to desorb the H₂ molecules at the room temperature (T = 300 k). Furthermore, the B₂₈ cages bridged by the sp²-terminated B₅ chain can hold Na (Li, Ca, K, Mg, Y) atoms to capture hydrogen molecules with moderate E_ad and HGD. These findings suggest a new route to design hydrogen storage materials under the near-ambient conditions.     

Computational insights of alkali metal (Li / Na / K) atom decorated buckled bismuthene for hydrogen storage

The mechanism of hydrogen molecule adsorption on 2D buckled bismuthene (b-Bi) monolayer decorated with alkali metal atoms was studied using density functional theory based first principles calculations. The decorated atoms Li, Na and K exhibited distribution on surface of b-Bi monolayer with increasing binding energy of 2.6 eV, 2.9 eV and 3.6 eV respectively. The adsorption of H₂ molecule on the slabs appeared stable which was further improved upon inclusion of van der Waals interactions. The adsorption behaviour of H₂ molecules on the decorated slabs is physisorption whereas the slabs were able to bind up to five H₂ molecules. The average adsorption energy per H₂ molecules are in range of 0.1–0.2 eV which is good for practical applications. The molecular dynamics simulation also confirmed the thermodynamic stabilities of five H₂ molecules adsorbed on the decorated slabs. The storage capacity values are found 2.24 wt %, 2.1 wt %, and 2 wt %, for respective cases of Li, Na and K atoms decorated b-Bi. The analysis of the adsorbed cases pointed to electrostatic interaction of Li and H₂ molecule. The adsorption energies, binding energies, charge analysis, structural stability, density of states, and hydrogen adsorption percentage specifies that the decorated b-Bi may serve as an efficient hydrogen storage material and could be an effective medium to interact with hydrogen molecules at room temperature.     

High capacity reversible hydrogen storage in zirconium doped 2D-covalent triazine frameworks: Density Functional Theory investigations

Employing the state-of-the art Density Functional Theory (DFT) Simulations, we have investigated hydrogen storage capability in zirconium doped novel 2D heterostructures, Covalent Triazine Frameworks (CTFs), specifically CTF-1, rich in nitrogen functionalities. Zirconium atom is strongly bonded to the triazine framework with a -3.61 eV binding energy, and each Zr atom was found to adsorb 7 H₂ molecules reversibly with binding energy ?0.38 eV per H₂ on an average giving a gravimetric storage capacity of 7.1% which accomplishes the US D.o.E. targets for suitable hydrogen storage substrates. The system stability at ambient and higher temperatures as verified using ab initio Molecular Dynamics simulations as well as existence of sufficient diffusion energy barrier preventing metal-metal clustering certifies the practical viability of the system as a high capacity H₂ storage device. The mechanism of interaction of Zr on 2D CTF-1 and H₂ molecules on Zr+CTF-1 have been analyzed by partial density of states, charge density distribution plot and Bader Charge Analysis. Charge transfer from Zr 4d orbital to 2p orbital of triazine ring was observed, whereas bonding of H₂ is through Kubas interaction which involves the charge donation from the filled σ orbitals of hydrogen molecules to the vacant metal d orbitals, and the subsequent back donation of charge from the occupied metal d orbitals to the vacant σ1 orbital of hydrogen molecules. As the system is stable, can hold high H₂ wt% (7.1%) with suitable desorption temperature (442 K at ambient), we propose that Zr doped 2D CTF-1 can act as a potential H₂ storage device.