Facile electrodeposited amorphous Co–Mo–Fe electrocatalysts for oxygen evolution reaction

A new type of superior activity and highly cost-effective amorphous electrocatalyst Co–Mo–Fe on nickel foam (NF) supports is prepared by facile one-step rapid electrodeposition. The amorphous electrocatalyst Co–Mo–Fe/NF shows excellent oxygen evolution reaction (OER) performance, with a small overpotential of 218 mV at 10 mA cm^?2 current density in 1 M KOH. It only needs overpotential of 252 mV at 50 mA cm^?2 current density in 1 M KOH, and the Tafel slope is 45 mV dec^?1. The results show that the doping of Fe significantly improves the oxygen evolution capacity of the Co–Mo–Fe system. The synergistic effect of the three metals and the doping of the third metal iron make the oxygen evolution active sites of the whole system increase significantly. This provides a feasible direction for the oxygen evolution reaction of cobalt transition metal.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Electroless deposition synthesis of composite catalysts Ni-Fe-P-WO3/NF with superior oxygen evolution performance

The proper construction of high efficiency, low-cost, earth-abundant oxygen evolution reaction (OER) catalyst is essential for hydrogen formation by water splitting. A novel electrocatalyst with highly active OER performance was manufactured by a simple electroless deposition method of Ni-Fe-P-WO₃ on nickel foam (NF). Benefiting from outstanding mass transfer capability of Ni-Fe-P-WO₃/NF heterogeneous structure, abundance of active sites in the amorphous architecture and etc., the Ni-Fe-P-WO₃/NF shows extremely superb electrocatalytic properties compare to noble metal catalyst IrO₂/NF for OER, which needs an overpotential of only 218 mV in 1.0 M KOH solution to achieve the current density of 10 mA cm^?2. It also has remarkable OER activity at high current density that only needs 298 mV to attain 100 mA cm^?2 current density. Moreover, the Ni-Fe-P-WO₃/NF has low Tafel slope of 42 mV dec^?1. This study offers a novel approach to the production of OER multiphase electrocatalysts from oxides and alloys.     

Hydrothermally/electrochemically decorated FeSe on Ni-foam electrode: An efficient bifunctional electrocatalysts for overall water splitting in an alkaline medium

A new hybrid catalyst based on Ni foam (NF) and FeSe was prepared by a facial hydrothermal method, in which Se-decorated NF was subsequently electrochemically doped by Fe. Binder-free catalyst containing electrodes were directly tested for the hydrogen and oxygen evolution reaction (HER/OER). The FeSe/NF electrode displayed an OER current density of 100 mA cm⁻² at potential of 1.42 V, and a relatively small Tafel slope of 109 mV dec⁻¹ in a 1 M KOH solution. Also, FeSe/NF electrode exhibited reasonable HER overpotential of 200 mV at 10 mAcm⁻² current density with Tafel slope of 145 mV dec⁻¹. The XRD and TEM studies revealed that the formation of heterogeneous interfaces of NiSe₂ and FeSe₂,generated more active sites that can promote better ions and electron transport in the electrode/electrolyte interfaces. Furthermore, HRTEM analysis indicates that FeSe₂ rich in Se vacancy defects can be created with suitable M − O and M − H bond for better OER and HER performance, respectively. In a-two electrode alkaline water electrolyzer, current densities of 10 mA cm⁻² and 50 mA cm⁻² were obtained at cell voltages of 1.52 V and 1.85 V, respectively, using pure FeSe–NF as both the cathode and anode.     

Metal-organic frameworks derived self-supported Ni2P nanorod arrays for electrocatalytic hydrogen evolution

The development of efficient and low-cost electrocatalysts for hydrogen evolution reaction (HER) is of importance. Herein, we demonstrate a self-supported Ni₂P nanostructure with nanorod arrays morphology, fabricated by directly growing metal-organic frameworks (MOFs) on the commercial nickel foam prior to phosphorization treatment, as an electrocatalyst for HER. This electrocatalyst exhibits remarkable electrocatalytic HER activity in an alkaline electrolyte, affording current densities of 10 and 100 mA cm^?2 at the overpotentials of 120 and 168 mV, respectively, accompanied with a low Tafel slope of 37 mV dec^?1. Furthermore, this electrocatalyst shows a current density of 105 mA cm^?2, and this current density can be retained for more than 20 h, suggesting its superior stability. This remarkable HER performance is believed a result of superiority for its structural integrality and mechanical stability.     

Cobalt doping VS2 on nickel foam as a high efficient electrocatalyst for hydrogen evolution reaction

The development of non-precious metal catalysts with abundant reserves, low prices and good performance for HER is desired. In this work, rodlike Co doping VS₂ arrays on nickel foam (NF) (Co-VS₂/NF) were fabricated by a simple one-step solvothermal method. Structure characterization indicated that Co doping reduced the size of rodlike Co-VS₂ and meanwhile can modulate its electronic structure, which is beneficial for the enhancement of HER performance. The optimal Co-VS₂/NF-2 reveals a low overpotential of 164.5 mV at ?10 mA cm^?2, small Tafel slope of 52.2 mV dec^?1 and excellent long-term stability after 2000 cycles in 1 M KOH.     

Facile galvanic replacement method for porous Pd@Pt nanoparticles as an efficient HER electrocatalyst

In realm of renewable energy, development of an efficient and durable electrocatalyst for H₂ production through electrochemical hydrogen evolution reaction (HER) is indispensable. Herein, we demonstrate a simple preparation of carbon-supported nanoporous Pd with surface coated Pt (CS–PdPt) by a simple galvanic replacement reaction (GRR). The phase purity and porosity have been confirmed by XRD, HRTEM, and N₂ sorption techniques. As HER electrocatalyst, CS-PdPt showed a low overpotential of 26 mV in 0.5 M H₂SO₄ at current density of 10 mA cm⁻², which is lower than the commercial Pt/C electrode. The CS-PdPt catalyst exhibits an overpotential of 46 mV in 1 M KOH, and 50 mV in neutral buffer (1 M PBS) at 10 mA cm⁻². The CS-PdPt furnished with small Tafel values of 33, 88, and 107 mV dec⁻¹ in acidic, alkaline, and neutral medium, respectively. Accelerated durability test at 100 mV s⁻¹ for 1000 cycles demonstrated a negligible change in HER activity.     

3D self-standing grass-like cobalt phosphide vesicles-decorated nanocones grown on Ni-foam as an efficient electrocatalyst for hydrogen evolution reaction

The growing hydrogen consumption has greatly promoted the development of efficient, stable and low-cost electrocatalysts for the hydrogen evolution reaction (HER). Constructing functional nanostructures is an efficacious strategy to optimize catalytic performance. Herein, we present a feasible route to fabricate distinctive 3D grass-like cobalt phosphide nanocones clad with mini-vesicles on the hierarchically porous Ni foam, which can directly serve as a binder-free electrocatalyst with superior catalytic activity and durability in HER. Thanks to its distinctive 3D microstructure featured with favourable pore-size distribution, abundant active sites provided by mini-vesicles and rapid electron transfer with the assistance of Ni foam, the as-grown grass-like CoP/NF electrocatalyst has shown a favourable overpotential in an acidic solution with an onset overpotential of ∼35 mV, an overpotential of 71 mV at a current density of 10 mA cm⁻², reduced by 60 mV in comparison with that realized by urchin-like CoP/NF nanoprickles. Moreover, it has exhibited an excellent HER activity in the alkaline medium, with an overpotential of 117 mV at 10 mA cm⁻², a Tafel slope of 63.0 mV dec⁻¹ and a long-term electrochemical durability.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

N-doped graphene quantum dots incorporated cobalt ferrite/graphitic carbon nitride ternary composite for electrochemical overall water splitting

Multicomponent electrocatalysts containing carbon supports play a crucial role in influencing the hydrogen and oxygen evolution reactions which enhance the total water splitting. Herein, we report a ternary composite with cobalt ferrite, graphitic carbon nitride, and N-doped graphene quantum dots prepared via hydrothermal technique. The purity of the samples is established by carrying out various characterization methods. The intrinsic characteristics of the obtained materials are investigated by employing electrocatalytic processes in an alkaline media toward hydrogen and oxygen evolution reactions. Cobalt ferrite/graphitic carbon nitride/N doped graphene quantum dots electrocatalyst demonstrates a very low overpotential towards hydrogen evolution reaction of 287 mV at a constant 10 mA cm^?2 current density in 1.0 M KOH. Tafel slope and R_ct values generated are 94 mV dec^?1 and 0.86 cm², respectively. Oxygen evolution reaction studies reveal an overpotential of 445 mV at 10 mA cm^?2 with a Tafel slope of 69 mV dec^?1. Finally, the cell potential needed for the cobalt ferrite/graphitic carbon nitride/N doped graphene quantum dots electrode to achieve 10 mA cm^?2 in total water splitting is only 2.0 V while displaying long-term stability.     

Low-pressure-plasma-processed NiFe-MOFs/nickel foam as an efficient electrocatalyst for oxygen evolution reaction

A NiFe bimetallic metal organic framework (MOF) deposited on nickel foam and processed by low-pressure plasmas with 95%Ar+5%H₂, pure Ar, and 95%Ar+5%O₂ gases is used as an electrocatalyst for the oxygen evolution reaction. An alkaline solution (1 M KOH) with 95%Ar+5%H₂ plasma processed NiFe-MOFs/NF exhibits the best electrocatalytic performance with the lowest overpotential of 149 mV at a current density of 10 mA cm^?2 and a Tafel slope of 54 mV dec^?1. Furthermore, electrical impedance spectroscopy and cyclic voltammetry show that after 95%Ar+5%H₂ plasma treatment, the interfacial impedance greatly reduces, and the electrical double-layer capacitance slightly increased.     

Urchin-like Co0.8-Mn0.2-P/CC nanowires array: a high-performance and cost-effective hydrogen evolution electrocatalyst

Using cost-effective materials to replace precious Pt-based hydrogen evolution reaction (HER) catalysts holds great foreground for energy saving and environmental protection. In this work, we successfully prepared an urchin-like Co_0.8-Mn_0.2-P nanowires array supported on carbon cloth (CC) through a hydrothermal-phosphatization strategy and we also systematically studied its electrocatalytic HER performance. Electrochemical tests demonstrate that our urchin-like Co_0.8-Mn_0.2-P/CC possesses outstanding HER activity in acidic and alkaline media. In 0.5 M H₂SO₄, this urchin-like Co_0.8-Mn_0.2-P/CC only requires an overpotential of 55 mV to drive a current density of 10 mA cm⁻², with the Tafel slope of 55.9 mV dec⁻¹. Similarly, when reaching the same current density, just a particularly low overpotential of 61 mV is required with a corresponding Tafel slope of 41.7 mV dec⁻¹ in 1 M KOH. Furthermore, this electrocatalyst exhibits superior stability with 1000 cycles of cyclic voltammetry and 24 h in the I-T test. Such excellent HER catalytic performance can be attributed to the synergistic effect between Co and Mn atoms and high electrochemical active surface area (ECSA). Our work provides a valuable synthesis strategy of non-precious and high HER performance catalytic material.     

MoS2/NiS heterostructure grown on Nickel Foam as highly efficient bifunctional electrocatalyst for overall water splitting

It is great important to develop and explore a non-precious bifunctional electrocatalyst with high efficiency and good stability for Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) in alkaline electrolyte. Herein, a three-dimensional (3D) needle-like MoS₂/NiS heterostructure supported on Nickel Foam (NF) (MoS₂/NiS/NF) is synthesized by a simple hydrothermal method for the first time, which can act as a good bifunctional electrocatalyst for overall water splitting. As expected, the optimal MoS₂/NiS/NF exhibits excellent catalytic performance with a low overpotential of 87 and 216 mV at 10 mA cm⁻² for HER and OER in 1 M KOH electrolyte, respectively, accompanied by good cycle stability. Furthermore, the MoS₂/NiS/NF as bifunctional electrocatalyst in an electrolyzer shows high efficiency with a cell voltage of 1.5 V at 10 mA cm⁻², as well as superior durability. The present work may open a new direction to design and develop a non-precious bifunctional electrocatalyst with excellent catalytic activity for water splitting in the future.     

Synthesis of nest-like porous MnCo–P electrocatalyst by electrodeposition on nickel foam for hydrogen evolution reaction

It is very important to develop hydrogen evolution catalyst with high activity and low cost to solve energy crisis. The abundant non-precious metals and phosphides have attracted much attention and are expected to replace platinum catalysts. Herein, we report an approach to prepare nest-like porous MnCo–P electrocatalyst on the nickel foam by two-step electrodeposition. The prepared bimetallic phosphide MnCo–P₃/NF has excellent hydrogen catalytic activity. In the 1 M NaOH solution, the current density of 10 mA cm^?2 required overpotential is only 47 mV, its Tafel slope is 56.4 mV dec^?1, and the higher current density 100 mA cm^?2 required overpotential is only 112 mV. More importantly, the MnCo–P₃/NF catalyst has a long-term stability of electrocatalytic hydrogen evolution. After 24 h catalytic hydrogen evolution test at a constant current density of 20 mA cm^?2, its potential basically does not change. Furthermore, the current density only changes slightly after 1500 cycles of CV test. All these well prove that the prepared MnCo–P₃/NF catalyst has a long-term hydrogen evolution stability. According to performance testing and morphological characterization, the MnCo–P₃/NF has a high hydrogen catalytic activity and stability are due to its larger active area, lower interface charge transfer resistance and stronger mechanical stability. In summary, the study explores a method of preparing bimetallic phosphides as an efficient and stable hydrogen evolution catalyst.     

Ni–P alloy@carbon nanotubes immobilized on the framework of Ni foam as a 3D hierarchical porous self-supporting electrode for hydrogen evolution reaction

The development of self-supporting electrodes that exhibited both high efficiency and good durability remained a challenge in the field of hydrogen energy utilisation. Here, we designed a self-supporting 3D hierarchical porous electrode by filling carbon nanotubes (CNTs) loaded with Ni–P alloy into the framework of nickel foam (NF). Firstly, CNTs were decorated with a catalytically active Ni–P alloy via electroless plating (Ni–P@CNTs). Then, the Ni–P@CNTs were filled and anchored onto the framework of NF via electroplating to synthesise a self-supporting electrode (Ni–P@CNTs/NF). The Ni–P@CNTs/NF exhibited an excellent catalytic performance toward the hydrogen evolution reaction (HER) in 1 M KOH electrolyte, with an overpotential of 53 mV at 10 mA cm^?2, a small Tafel slope of 101.56 mV dec^?1 and excellent long-term durability. This facile and effective strategy might provide a new path to the design of self-supporting electrodes with enhanced HER catalytic.     

Facile construction of porous and heterostructured molybdenum nitride/carbide nanobelt arrays for large current hydrogen evolution reaction

The development of cost-effective, highly efficient and stable electrocatalysts for alkaline water electrolysis at a large current density has attracted considerable attention. Herein, we reported a one-dimensional (1D) porous Mo₂C/Mo₂N heterostructured electrocatalyst on carbon cloth as robust electrode for large current hydrogen evolution reaction (HER). The MoO₃ nanobelt arrays and urea were used as the metal and non-metal sources to fabricate the electrocatalyst by one-step thermal reaction. Due to the in-situ formed abundant high active interfaces and porous structure, the Mo₂C/Mo₂N electrocatalyst shows enhanced HER activity and kinetics, as exemplified by low overpotentials of 54, 73, and 96 mV at a current density of 10 mA cm^?2 and small Tafel slopes of 48, 59 and 60 mV dec^?1 in alkaline, neutral and acid media, respectively. Furthermore, the optimal Mo₂C/Mo₂N catalyst only requires a low overpotential of 290 mV to reach a large current density of 500 mA cm^?2 in alkaline media, which is superior to commercial Pt/C catalyst (368 mV) and better than those of recently reported Mo-based electrocatalysts. This work paves a facile strategy to construct highly efficient and low-cost electrocatalyst for water splitting, which could be extended to fabricate other heterostructured electrocatalyst for electrocatalysis and energy conversion.     

Facile one-step in-situ encapsulation of non-noble metal Co2P nanoparticles embedded into B,N, P tri-doped carbon nanotubes for efficient hydrogen evolution reaction

Developing high performance, good stability and noble-metal-free electrocatalysts for renewable hydrogen evolution reaction (HER) remain a substantial challenge. Herein, we introduce a novel facile one-step in-situ strategy through pyrolysis for the synthesis of Co₂P nanoparticles encapsulated Boron, Nitrogen, and Phosphorous tri-doped carbon nanotubes (Co₂P/BNP-CNTs). The synergetic effect between Co₂P nanoparticles and heteroatom doped CNTs contributes to the remarkable HER performance. The Co₂P/BNP-CNT-900 electrocatalyst shows a low overpotential of 133 mV at a current density of 10 mA cm⁻² and a small Tafel slope of 90 mV dec⁻¹ in 0.1 M KOH media. More importantly, the Co₂P/BNP-CNT-900 electrocatalyst exhibits superior long-term stability in alkaline solution at −0.25 V versus Reversible Hydrogen Electrode (RHE) for 15 h and up to 1000 cycles with negligible performance loss. Overall, our works suggest a one-pot facile synthesis strategy for rational designing high-performance electrocatalysts with enhanced HER performance.     

One-pot solvothermal synthesis of Co2P nanoparticles: An efficient HER and OER electrocatalysts

Development of an inexpensive electrocatalyst for hydrogen evolution (HER) and oxygen evolution reactions (OER) receives much traction recently. Herein, we report a facile one-pot ethyleneglycol (EG) mediated solvothermal synthesis of orthorhombic Co₂P with particle size ~20–30 nm as an efficient HER and OER catalysts. Synthesis parameters like various solvents, temperatures, precursors ratios, and reaction time influences the formation of phase pure Co₂P. Investigation of Co₂P as an electrocatalyst for HER in acidic (0.5 M H₂SO₄) and alkaline medium (1.0 M KOH), furnishes low overpotential of 178 mV and 190 mV, respectively to achieve a 10 mA cm^?2 current density with a long term stability and durability. As an OER catalyst in 1.0 M KOH, Co₂P shows an overpotential of 364 mV at 10 mA cm^?2 current density. Investigation of Co₂P NP by XPS analysis after OER stability test under alkaline medium confirms the formation of amorphous cobalt oxyhydroxide (CoOOH) as an intermediate during OER process.     

Exposure of active sites in Mn–SnS2 nanosheets to boost hydrogen evolution reaction

Designing and synthesizing high-activity, durable, and low-cost catalysts for the electrochemically transformation of water to hydrogen are vitally important to future energy systems. Herein, a simple but effective strategy for manganese-metal-heteroatom doping is adopted to intrinsically elevate the electrocatalytic activities of SnS₂ nanosheets by a facile two steps hydrothermal-sulfurization approach. Electrocatalytic hydrogen evolution (HER) performance of Mn–SnS₂ nanosheets grown on 3D nickel foam (Mn–SnS₂/NF) is efficiently optimized since the dopants and defects endow the Mn–SnS₂/NF vast active sites. An overpotential as low as 71 mV is required to drive a current density of 10 mA/cm² with a low Tafel slope of 72 mV dec^?1 in alkaline environment (1 M KOH). In addition, the Mn–SnS₂/NF exhibits prominent stability in 1 M KOH electrolyte, which is an indispensable index for the potential HER electrocatalysts. The present work demonstrates that the heteroatom manganese doping strategy renders a meaningful route for synthesizing cost-efficient HER electrocatalysts in alkaline condition.