Facile synthesis of three-dimensional spherical Ni(OH)2/NiCo2O4 heterojunctions as efficient bifunctional electrocatalysts for water splitting

Synthesis of highly efficient, non-noble and bi-functional electrocatalysts is exceedingly challenging and necessary for water splitting devices. In this work, three-dimensional spherical Ni(OH)₂/NiCo₂O₄ heterojunctions are prepared by a one-step hydrothermal method and the hybrids are explored as efficient electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline electrolyte via tuning different Ni/Co atomic ratios of heterojunctions. The optimized Ni(OH)₂/NiCo₂O₄ (S (1:1)) exhibits high electrocatalytic activity with an ultralow over-potential of 189 mV at 10 mA cm⁻² for the HER. With regard to the OER, the over-potential of the as-synthesized S (1:1) heterojunction is only 224 mV at the current density of 10 mA cm⁻². The improved catalytic performance of the Ni(OH)₂/NiCo₂O₄ heterojunctions is attributed to the chemical synergic combining of Ni(OH)₂ and NiCo₂O₄, large specific surface area for exposing more accessible active sites, and heterointerface for activating the intermediates that facilitates electron/electrolyte transport. The prepared catalyst exhibits good durability and stability in HER and OER catalyzing conditions. This study provides a feasible approach for the building of highly efficient bifunctional water splitting electrocatalysts and stimulates the development of renewable energy conversion and storage devices.     

Design and synthesis of dispersed Ni2P/Co nano heterojunction as bifunctional electrocatalysis for boosting overall water splitting

The design of multi-components nanostructure with interface heterojunction is the cutting-edge research in recent years because the catalytic activity, stability, and durability of catalysts are highly affected by the strong electronic effects, geometric effects, and synergistic effects occurring at the interface. Based on this, an efficient bifunctional electrocatalyst embedding highly dispersed Ni₂P/Co nano heterojunction at the porous hollow-out carbon shell is developed for overall water splitting through evenly epitaxial growth of ultrathin Ni₂P nanosheets on Co-based ZIF-67. The distinct electron interaction between the interfacial Ni₂P (300) and Co (100) effectively lowers the overpotential of OER (316 mV vs. RHE) and HER (149 mV vs. RHE) at the current density of 10 mA cm^?2. Density functional theory (DFT) calculation further identifies that the Ni₂P and Co heterojunctions optimize the adsorption energy of intermediate products and lower the energy barrier of the rate-determining step of OER significantly. This work provides a rational design of a well-defined interface toward overall water splitting electrocatalysts and offers a scientific basis for an in-depth understanding of the mechanism of the catalysts with nano heterojunction.     

Crossed FeCo2S4 nanosheet arrays grown on 3D nickel foam as high-efficient electrocatalyst for overall water splitting

Great efforts in developing low-cost, highly efficient and stable electrocatalysts are to tune the chemical compositions and morphological characteristics for enhancing efficiency of water splitting. In this communication, FeCo₂S₄ nanosheet was grown in situ on nickel foam (FeCo₂S₄/NF) via a facile hydrothermal sulfidization method and served as a high-efficient bifunctional electrocatalyst for overall water splitting. As-synthesized FeCo₂S₄/NF self-supported electrode delivers 20 mA cm^?2 at an overpotential of 259 mV toward OER and 10 mA cm^?2 at an overpotential of 131 mV toward HER in alkaline media. Moreover, when used as both anode and cathode in a two-electrode electrolyzer, only a small cell voltage of 1.541 V is needed to afford a current density of 10 mA cm^?2 for overall water splitting. Bifunctional electrode FeCo₂S₄/NF also revealed a distinguished electrochemical durability during a 12 h stability test at 1.63 V, which would provide a promising water splitting installation for commercial hydrogen production.     

Heterostructural Co/CeO2/Co2P/CoP@NC dodecahedrons derived from CeO2-inserted zeolitic imidazolate framework-67 as efficient bifunctional electrocatalysts for overall water splitting

The design and fabrication of highly active, robust and cost-efficient electrocatalysts for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great significance towards overall water splitting, but remains challenging as well. Herein, we report, for the first time, heterostructural Co/CeO₂/Co₂P/CoP@NC dodecahedrons as bifunctional electrocatalyst, in which abundant interfaces are formed between different components. Typical ZIF-67 (ZIF = zeolitic imidazolate framework) dodecahedrons with pre-inserted CeO₂ nanowires were selected as precursors to synthesize Co/CeO₂/Co₂P/CoP@NC via a direct carbonization process followed by phosphidation, simultaneously generating the strong coupled heterojunction interfaces through interactions between CeO₂ and Co_xP species. Abundant porous structure leads to the exposure of more active sites and the carbon encapsulation of nanodomains sustains the high robustness and conductivity and the synergistic effect between the multi-components heterostructure. Benefiting from the above collective advantages, the Co/CeO₂/Co₂P/CoP@NC electrocatalysts exhibit small overpotentials of 307 and 195 mV to derive 10 mA cm⁻² for OER and HER, respectively. Furthermore, an alkaline electrolyzer assembled by using Co/CeO₂/Co₂P/CoP@NC as both cathode and anode can achieve a current density of 10 mA cm⁻² at a low voltage of 1.76 V and work continuously for over 15 h. This work would provide a rational protocol for fabrication multi-phase interface enriched electrocatalysts toward highly efficient energy conversion.     

Mo/P doped NiFeSe as bifunctional electrocatalysts for overall water splitting

Designing high-efficiency catalysts for overall water splitting is critical to reduce the cost of hydrogen fuel as a clean and renewable energy source in future society. In this work, a Mo-, P-codoped NiFeSe was successfully synthesized on nickel foam (NF) by one-step electrodeposition. Through the doping strategy, the conductivity can be well promoted, and the production of nanosheets on the catalyst surface and active phases during hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) provided much more active sites, which leaded to efficient HER/OER performances of as-synthesized Mo-, P-codoped NiFeSe catalysts, i.e., a low overpotential of 100 mV/200 mV at current density of 10 mA cm⁻² in 1.0 M KOH with stability of 95 h/60 h, respectively. It only required 1.53 V to deliver a current density of 10 mA cm⁻² in overall water splitting and maintained outstanding durability for 100 h. This work is beneficial to future design of high efficient and low-cost bifunctional catalysts for overall water splitting.     

The bifunctional 3D-on-2D FeCo/Ni(OH)2 hierarchical nanocatalyst for industrial-level electrocatalytic water splitting

Developing high-performing and cost-effective bifunctional electrocatalysts under the industrial conditions is significant for revolutionizing the hydrogen economy. Herein, we developed a bifunctional 3D-on-2D FeCo/Ni(OH)₂ hierarchical nanocatalyst on Ni mesh by a facile and low-cost method that can boost both the two half-reactions of water splitting all at once. The FeCo/Ni(OH)₂/Ni mesh showed an outstanding electrocatalytic performance under the industrial conditions (3 M KOH, 90 °C) with applied voltages of 1.47 and 1.91 V to drive the electrolyzer at 10 and 500 mA/cm², respectively, much better than the Ni(OH)₂/Ni mesh, FeCo/Ni mesh, and Raney Ni/Ni mesh samples. Furthermore, it can maintain good stability for more than 192 h under the working condition of 500 mA/cm². This promotion in electrocatalytic properties can be ascribed to the synergistic effects between 3D FeCo nanoparticles and 2D Ni(OH)₂ nanosheets, including the large electrochemically active surface areas, the intense electronic interplay between the two component and the elevated interfacial contact and charge transport. Eventually, this water electrolyzer yields a 14.7% solar-to-hydrogen efficiency when integrated with Si solar cells, which exceeds analogous solar-driven systems reported so far.     

Manganese oxide embedded graphene nanohybrid for pH-universal electrochemical overall water splitting

Efficient non-noble metal bifunctional electrocatalysts for overall water splitting in pH universal is highly desired in application. Herein, MnO₂/graphene composition are applied as efficient electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in pH-universal electrolytes with the help of plasma dc arc method. The couple of MnO₂ and graphene highly benefits to the H₂O, H⁺ and OH⁻ absorption respectively. The defects and stable Mn³⁺ contribute to the transfer of electron and charge. The low overpotentials and small Tafel slopes reveal attractive activities of HER and OER. The good electrocatalytic performances are attributed to the synergistic effect and abundant heterogeneous interfaces in MnO₂/graphene. These can offer rich electroactive sites and accelerate electron transfer. Thus, it may provide facile route for developing nonprecious electrocatalysts of water splitting.     

Chromium doping and in-grown heterointerface construction for modifying Ni3FeN toward bifunctional electrocatalyst toward alkaline water splitting

Exploring high-performance non-noble metal electrocatalysts is pivotal for eco-friendly hydrogen energy applications. Herein, featuring simultaneous Chromium doping and in-grown heterointerface engineering, the Cr doping Ni₃FeN/Ni heterostructure supported on N-doped graphene tubes (denoted as Cr–Ni₃FeN/Ni@N-GTs) was successfully constructed, which exhibits the superior bifunctional electrocatalytic performances (88 mV and 262 mV at 10 mA cm⁻² for HER and OER, respectively). Furthermore, an alkaline electrolyzer, employing Ni₃FeN/Ni@N-GTs as both the cathode and the anode, requires a low cell voltage of 1.57 V at 10 mA⋅cm⁻². Cr doping not only modulates the electronic structure of host Ni and Fe but also synchronously induces nitrogen vacancies, leading to a higher number of active sites; the in-grown heterointerface Cr–Ni₃FeN/Ni induces the charge redistribution by spontaneous electron transfer across the heterointerface, enhancing the intrinsic catalytic activity; the N-GTs skeleton with excellent electrical conductivity improves the electron transport and mass transfer. The synergy of the above merits endows the designed Cr–Ni₃FeN/Ni@ N-GTs with outstanding electrocatalytic properties for alkaline overall water splitting.     

Electrochemical construction of Cu@NF frameworks and synthesis of self-supported microflower Cu2S@NF as bifunctional catalysts for overall water splitting

A two-step electrochemical method is proposed for the in-situ deposition of copper and synthesis of copper(Ⅰ) sulfide (Cu₂S) with controllable morphology on nickel foam (NF), and the thus-prepared self-supported Cu₂S@NF electrodes exhibit excellent performance as bifunctional electrocatalysts. Characterizations with scanning electron microscopy show rock-shape of the deposited copper through potentiostatic method, which can be further sulfurized to microflower morphology by a unique underpotential electrochemical method. The size and amount of the deposits can be adjusted by controlling applied potentials, leading to the optimization of electrocatalytic activity. The Cu₂S@NF exhibits superior electrocatalytic performance towards HER and OER in 1 M KOH with the low overpotentials of 105 mV and 194 mV at 10 mA/cm², as well as small Tafel slopes of 92.89 mV/dec and 72.81 mV/dec, respectively. This work provides a simple method for the synthesis of efficient catalysts, which can be extended to the fabrication of other transition metal-based electrocatalysts.     

Combustion-derived BaNiO3 nanoparticles as a potential bifunctional electrocatalyst for overall water splitting

Electrochemical water electrolyser though an assuring solution for clean hydrogen production, the sluggish kinetics and high cost of existing precious metal electrocatalyst remains a barrier to its effective utilization. Herein, solution combustion route derived perovskite type barium nickelate (BaNiO₃) nanoparticles were developed and studied for their bifunctional electrocatalytic properties towards overall water splitting. The unannealed BaNiO₃ nanoparticles exhibited the highest OER and HER activity with overpotentials 253 mV and 427 mV respectively to attain 10 mAcm⁻² in 1.0 M KOH. Using unannealed BaNiO₃ as a bifunctional electrocatalyst in a two-electrode alkaline electrolyser, the cell was able to achieve the benchmark current density at a low cell voltage of 1.82 V. Impressively the setup's electrocatalytic performance improved 4.9% after continuous overall water splitting for 24 h at 30 mAcm⁻². Therefore, BaNiO₃ nanoparticles can be a low-cost and efficient alternative for noble metal electrocatalysts for clean H₂ production.     

Overall noble metal free Ni and Fe doped Cu2ZnSnS4 (CZTS) bifunctional electrocatalytic systems for enhanced water splitting reactions

Herein, we report an inexpensive synthesis of sonochemical nickel and iron (M = Ni, Fe) doped Cu₂ZnSnS₄ (CZTS) and their utility as a nanoelectrodes for improved electrocatalytic water splitting performance. The as-synthesized electrode materials were characterized further by Transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman and X-ray photoelectron (XP) spectroscopic studies. Significantly, Ni doped CZTS electrocatalyst exhibits low overpotential approximately 214 and 400 mV for the hydrogen evolution reactions (HER) in 0.5 M H₂SO₄ and 1 M KOH electrolyte solutions respectively, and 1.29 V vs RHE for the oxygen evolution reactions (OER) in 1 M KOH at 10 mA/cm² current density. Small Tafel slopes and tested durability for longer time i.e. upto 500 min for water splitting, demonstrates that Ni doped CZTS is efficient bifunctional electrocatalyst having high activity along with extraordinary current/potential stability. Moreover, Fe doped CZTS electrocatalyst shows relatively poor response, i.e. overpotential 300 mV in 0.5 M H₂SO₄ and 445 mV in 1.0 M KOH towards HER and overpotential 1.54 V for the OER in 1 M KOH reaches at 10 mA/cm². This highly efficient bifunctional electrocatalysts that can meet the existing energy anxiety.     

Growth of nickel vacancy NiFe-LDHs on Ni(OH)2 nanosheets as highly efficient bifunctional electrocatalyst for overall water splitting

A bifunctional electrocatalyst was fabricated by in-situ vertical growth of Ni(OH)₂ nanosheets on nickel foam (NF), with subsequent accretion of nickel vacancy NiFe-LDHs (Ni^vacFe-LDHs) by two step hydrothermal method. It was exhibited to be a high-efficiency overall water splitting performance with good stability. The low over-potentials of 292, 330, and 376 mV were acquired when the current density was selected as 50, 100, and 200 mA/cm² for oxygen evolution reaction (OER) with a relatively low Tafel slope. It also achieved low over-potentials of 116 and 247 mV when the current densities were 10 and 200 mA/cm² for hydrogen evolution reaction (HER), and Tafel slope was estimated to be 95.87 mV/dec. For the overall water splitting, NF–Ni(OH)₂-Ni^vacFe-LDHs needed only a low overpotential (291 mV) to achieve 25 mA/cm² in 1 mol/L potassium hydroxide. The long-term testing of this electrode for 24 h chronopotentiometric test at 25 mA/cm² demonstrated very eminent stability.     

Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

NiSe2@NixSy nanorod on nickel foam as efficient bifunctional electrocatalyst for overall water splitting

Electrocatalytic water splitting technology has become one of the most promising methods to solve the energy crisis, which can produce a large amount of high purity H₂ and O₂. It is necessary to develop efficient and stable water splitting catalyst for reducing the overpotential of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) and accelerating their reaction kinetics. A series of NiSe₂@Ni_xS_y nanoarrays was firstly in situ grown on the nickel foam through the typical hydrothermal, selenylation and sulfuration pathways. The Na₂SeO₃ homogeneous solution is formed by hydrothermal and the selenization process is done at the temperature of 180^。C. Then the nickel foam (NF) is put into the Na₂SeO₃ solution to form NiSe₂ material at the temperature of 120^。C. After that, the NiSe₂ materials were sulfuretted with different amounts of sulfur to form NiSe₂@Ni_xS_y hybrid materials. The experimental results demonstrate that the NiSe₂@Ni_xS_y material as a 3D electrode can maximize the synergistic reaction between NiSe₂ and Ni_xS_y, thus exhibiting an efficient and comprehensive water splitting performance. The NiSe₂@Ni_xS_y-1 material presents a superior OER performance with requiring the overpotential of only 206 mV at 100 mA cm⁻². Moreover, the NiSe₂@Ni_xS_y-0.3 material presents a superior HER performance with requiring the overpotential of only 148 mV at 100 mA cm⁻². It is worth noting that when NiSe₂@Ni_xS_y-1 material and the NiSe₂@Ni_xS_y-0.3 material was used as cathode and anode, only 1.53 V cell voltage is needed to produce a current density of 10 mA cm⁻² throughout the water splitting process, which is one of the smallest values reported so far. Density functional theory calculations results show that the Ni₃S₂ has the best water adsorption energy, so it is an active species in the process of catalysis. However, NiSe₂ has more density distribution around the Fermi level, indicating that it exhibits better metallic properties, which makes the NiSe₂@Ni_xS_y-1 hybrid material exhibit better electronic conductivity.     

Designing of CoP4/FeP4 with hollow nanocages as bifunctional catalysts for overall water splitting

Efficient and stable electrocatalysts are essential for water splitting. Feasible structural design can facilitate electron transport and increase specific surface area. Herein, the porous CoP₄/FeP₄ hollow cubes are synthesized by two steps: synthesizing the Co–Fe prussian blue analogues via co-precipitation and phosphating it by calcination. The construction of heterojunction in CoP₄/FeP₄ not only accelerates electronic transmission but also provides active sites, which acts synergistically on the oxygen and hydrogen evolution reactions. Therefore, the CoP₄/FeP₄ hollow cubes with the exist of mesoporous exhibit the promising performance for water splitting. The enhanced performance that basically originates from bimetallic synergy and unique morphological structure is acquired with a low overpotential of 270 mV at 10 mA cm^?2 and the Tafel slope of 42.4 mV dec^?1 towards the oxygen evolution reaction (OER). Electrolyzer with two-electrode system assemble by utilizing the CoP₄/FeP₄ hybrid as anode and cathode exhibits a cell voltage of 1.74 V to achieve 10 mA cm^?2 for overall water splitting. This study that provides a simple strategy to design and construct the heterogeneous interface may promote the development of non-noble metal for HER and OER.     

Nanoengineered Zn-modified Nickel Sulfide (NiS) as a bifunctional electrocatalyst for overall water splitting

Developing an efficient and inexpensive electrocatalyst is of paramount importance for realizing the green hydrogen economy through electrocatalytic water splitting. Here, we demonstrated a facile large-scale, industrially viable binder-free synthesis of Zn-doped NiS electrocatalyst on bare nickel foam (NF) through a hydrothermal technique. The present catalyst, i.e., nickel sulfide (NiS) nanosheets on nickel foam with optimized doping of Zn atom (Zn–NiS-3), displays excellent catalytic efficacy for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). It requires an overpotential of 320 mV for OER at a current density of 50 mA cm⁻² and an overpotential of 208 mV for HER at a current density of 10 mA cm⁻². The water electrolyser device having Zn–NiS-3 electrocatalyst as both cathode and anode show excellent performance, requiring a cell voltage of only 1.71 V to reach a current density of 10 mA cm⁻² in an alkaline media. The density functional theory (DFT) based calculations showed enhanced density of states near Fermi energy after Zn doping in NiS and attributed to the enhanced catalytic activities. Thus, the present study demonstrates that Zn–NiS-3@NF can be coined as a viable electrocatalyst for green hydrogen production.     

Co3O4 nanoparticles decorated Polypyrrole/carbon nanocomposite as efficient bi-functional electrocatalyst for electrochemical water splitting

An effective bi-functional electrocatalyst of Co₃O₄/Polypyrrole/Carbon (Co₃O₄/Ppy/C) nanocomposite was prepared through a simple dry chemical method and used to catalyze the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Three types of carbon support as Vulcan carbon, reduced graphite oxide (RGO) and multi-walled carbon nanotubes (MCNTs) were used to study the influence on electrochemical reactions. Spherical shaped Co₃O₄ nanoparticles with 8–10 nm was found uniformly distributed on Ppy/C composite, which were analyzed by X-ray diffraction and transmission electron microscopy techniques. Amongst, Co₃O₄/Ppy/MWCNT shows improved bifunctional electrocatalytic activity towards both OER and HER with relatively low over potential (340 mV vs. 490 mV at 10 mA cm⁻²) and Tafel slope (87 vs. 110 mV dec⁻¹). In addition to that, MWCNT supported Co₃O₄/Ppy nanocomposite exhibits good electronic conductivity and electrochemical stability up to 2000 potential cycles. The results clearly indicate that the Co₃O₄/Ppy/MWCNT nanocomposite could be the promising bi-functional electrocatalyst for efficient water electrolysis.     

Crystalline nickel sulfide integrated with amorphous cobalt sulfide as an efficient bifunctional electrocatalyst for water splitting

The development of highly efficient and low-cost electrocatalysts is critical to the mass production of hydrogen from water splitting. Herein, a facile yet effective method was developed to synthesize bimetallic sulfides Ni₃S₂/CoS_x, which were aimed for use as the electrocatalysts in both HER and OER. Encouragingly, the Ni₃S₂/CoS_x demonstrated a low overpotential of 110 mV for HER at a current density of 10 mA·cm^?2. It was discovered that the surface of Ni₃S₂/CoS_x during OER process would undergo an in-situ oxidation to form MOOH (M = Co, Ni), that is, MOOH/Ni₃S₂/CoS_x were the real functioning species in catalysis, which had an excellent OER activity and a low overpotential of 226 mV. Additionally, the assembled electrolyzer required only a low cell voltage of 1.53 V to achieve a current density of 10 mA·cm^?2 in a 1 M KOH solution, and its performance was stable. Overall, this work provided a promising strategy for the facile fabrication of low-cost amorphous electrocatalysts, which is expected to promote the progress of overall water splitting.     

Facile construction of well-defined hierarchical NiFe2O4/NiFe layered double hydroxides with a built-in electric field for accelerating water splitting at the high current density

Interfacial charge redistribution induced by a strong built-in electric field can expertly optimize the adsorption energy of hydrogen and hydroxide for improving the catalytic activity. Herein, we develop a well-defined hierarchical NiFe₂O₄/NiFe layered double hydroxides (NFO/NiFe LDH) catalysts, exhibiting superior performance due to the strong interfacial electric field interaction between NiFe₂O₄ nanoparticle layers and NiFe LDH nanosheets. In 1 M KOH, NFO/NiFe LDH needs 251 mV and 130 to drive 50 and 10 mA cm^?2 for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Moreover, only 1.517 V cell voltage is needed to reach 10 mA cm^?2 towards overall water splitting. Notably, under simulated industrial electrolysis conditions, NFO/NiFe LDH only needs 289 mV to drive 1000 mA cm^?2. This work puts a deep insight into the role of the built-in electric field in transition metal-based catalysts for accelerating water splitting and scalable industrial electrolysis applications.     

In-situ growth of Ni–CoSe2 on biomass-derived carbon tubes as an efficient electrocatalyst for overall water splitting

A Ni–CoSe₂/BCT composite composed of biomass-derived carbon tubes and transition metal selenides was successfully constructed and explored as a highly efficient bifunctional electrocatalyst for overall water splitting.

1. Download : Download high-res image (184KB)
2. Download : Download full-size image