Cadmium sulfide embedded Prussian Blue as highly active bifunctional electrocatalyst for water-splitting process

Hydrogen production by water-splitting has limited commercial application as substantial amount of energy is required for the favorable kinetics of the process. We present an interface engineering strategy for constructing a bifunctional electrode material for an efficient water splitting process. Designed cadmium sulphide and Prussian blue nanorods (CdS-NRs@PBNPs) heterostructures acts as bifunctional electrocatalyst improved water splitting performance, for both HER and OER. For HER, the optimized hybrid CdS-NRs@PBNPs (1:1) showed significantly a low overpotentials of 126 mV and 181 mV at current densities of 10 mA cm^?2 and 20 mA cm^?2 respectively. For OER it displays an overpotential of 250 mV and 316 mV at current densities of 10 mA cm^?2 and 20 mA cm^?2. Additionally, the CdS-NRs@PBNPs (1:1) has demonstrated long-term stability. The hybrid's enhanced OER and HER activity is attributable to a synergetic impact between CdS-NRs and PBNPs, as well as the active site modification due to the presence of Cadmium and iron in the hybrid.     

Bifunctional nanoporous ruthenium-nickel alloy nanowire electrocatalysts towards oxygen/hydrogen evolution reaction

A class of ruthenium-nickel alloy catalysts featured with nanoporous nanowires (NPNWs) were synthesized by a strategy combining rapid solidification with two-step dealloying. RuNi NPNWs exhibit excellent electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in which the RuNi-2500 NPNWs catalyst shows an OER overpotential of 327 mV to deliver a current density of 10 mA cm^?2 and the RuNi-0 NPNWs catalyst requires the overpotential of 69 mV at 10 mA cm^?2 showing the best HER activity in alkaline media. Moreover, the RuNi-1500 NPNWs catalyst was used as the bifunctional electrocatalyst in a two-electrode alkaline electrolyzer for water splitting, which exhibits a low cell voltage of 1.553 V and a long-term stability of 24 h at 10 mA cm^?2, demonstrating that the RuNi NPNWs catalysts can be considered as promising bifunctional alkaline electrocatalysts.     

High throughput preparation of Ni–Mo alloy thin films as efficient bifunctional electrocatalysts for water splitting

The synthesis of cost-effective and high-performance electrocatalysts for water splitting is the main challenge in electrochemical hydrogen production. In this study, we adopted a high throughput method to prepare bi-metallic catalysts for oxygen/hydrogen evolution reactions (OER/HER). A series of Ni–Mo alloy electrocatalysts with tunable compositions were prepared by a simple co-sputtering method. Due to the synergistic effect between Ni and Mo, the intrinsic electrocatalytic activity of the Ni–Mo alloy electrocatalysts is improved, resulting in excellent HER and OER performances. The Ni₉₀Mo₁₀ electrocatalyst shows the best HER performance, with an extremely low overpotential of 58 mV at 10 mA cm^?2, while the Ni₄₀Mo₆₀ electrocatalyst shows an overpotential of 258 mV at 10 mA cm^?2 in OER. More significantly, the assembled Ni₄₀Mo₆₀//Ni₉₀Mo₁₀ electrolyzer only needs a cell voltage of 1.57 V to reach 10 mA cm^?2 for overall water splitting.     

Flower-like HEA/MoS2/MoP heterostructure based on interface engineering for efficient overall water splitting

The development of cheap, efficient, and active non-noble metal electrocatalysts for total hydrolysis of water (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) is of great significance to promote the application of water splitting. Herein, a heterogeneous structured electrode based on FeAlCrMoV high-entropy alloy (HEA) was synthesized as a cost-effective electrocatalyst for hydrogen and oxygen evolution reactions in alkaline media. In combination of the interfacial synergistic effect and the high-entropy coordination environment, flower-like HEA/MoS₂/MoP exhibited the excellent HER and OER electrocatalytic performance. It showed a low overpotential of 230 mV at the current density of 10 mA cm⁻² for OER and 148 mV for HER in alkaline electrolyte, respectively. Furthermore, HEA/MoS₂/MoP as both anode and cathode also exhibited an overpotential of 1.60 V for overall water splitting. This work provides a new strategy for heterogeneous structure construction and overall water splitting based on high-entropy alloys.     

A nano-spherical structure Ni3S2/Ni(OH)2 electrocatalyst prepared by one-step fast electrodeposition for efficient and durable water splitting

Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni₃S₂/Ni(OH)₂ dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni₃S₂, the existence of heterostructure and Ni(OH)₂ co-catalyst function greatly improves the overall water splitting performance of Ni₃S₂/Ni(OH)₂–NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm^?2 for HER and 249 mV at 20 mA cm^?2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm^?2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm^?2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

Self-supported hierarchical porous FeNiCo-based amorphous alloys as high-efficiency bifunctional electrocatalysts toward overall water splitting

Rationally designing an efficient and cost-effective bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a primary matter in applying electrocatalytic water splitting. Herein, a self-supported FeNiCo-based amorphous catalyst with a hierarchical micro/nanoporous structure is fabricated by dealloying an amorphous/nanocrystalline precursor. The amorphous nanoporous framework enables the prepared electrocatalyst to afford fast reaction kinetics, abundant active sites, and enhanced electrochemical active surface areas (ECSAs). Such structural advantages and the synergistic effects of the ternary transition metals contribute to a dramatic catalytic activity of this electrocatalyst under alkaline conditions, which delivers the current density of 10 mA cm⁻² at a low overpotential of 134 mV for HER and 206 mV for OER, respectively. Furthermore, a full electrolysis apparatus constructed by the self-supported hierarchical micro/nanoporous FeNiCo-based amorphous electrocatalyst as both cathode and anode acquires a dramatically low voltage of 1.58 V operating at 10 mA cm⁻² along with stability for more than 24 h for overall water splitting.     

Ni optimizes Ir reaction pathway through IrNi alloy synergistic effect to improve overall water splitting efficiency

Ir-based synergistic interaction with transition metal alloys for catalytic overall water splitting holds great promise for application. However, the role of the transition metal in the alloy for the catalytic reaction is not well understood. Here, we report new IrNi porous miscible alloy nanoparticles (IrNi PMAN) for overall water splitting in 1 M KOH. IrNi PMAN exhibits excellent bifunctional electrocatalytic activity with overpotentials of only 14 mV and 245 mV for HER and OER at 10 mA cm^?2, respectively. What's more, it only requires 43 mV and 324 mV for HER and OER at high current densities of 100 mA cm^?2, respectively. In addition, IrNi PMAN as two-electrode electrolyzer produces a current density of 100 mA cm^?2 at 1.69 V. The synergistic effect of the alloys is the main factor for the high catalytic efficiency. Notably, DFT calculations indicate that Ni adsorbs OH^- more rapidly and accelerates Ir adsorption and conversion of OER intermediates, thus improving the stability and activity of overall water splitting.     

Tailoring cation vacancies in Co,Ni phosphides for efficient overall water splitting

High-efficiency water splitting catalysts are competitive in energy conversion and clean energy production. Herein, a bifunctional water splitting catalyst CoNiP with cation vacancy defects (CoNiP–V) is constructed through defect engineering. The results show that abundant cation vacancy defects in CoNiP–V are bifunctional active centers in the process of water electrolysis, which enhance the activity of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In 1.0 mol L^?1 potassium hydroxide, CoNiP–V requires a pretty low overpotential of 58 mV to reach a geometrical current density of 10 mA cm^?2 for HER. To deliver a current density of 100 mA cm^?2, only 137 mV and 340 mV of overpotential are needed for HER and OER, respectively. Moreover, the cell with CoNiP–V as both cathode and anode exhibits good stability, which only needs 1.61 V to achieve a current density of 100 mA cm^?2, and the cell voltage barely rises 10% after 100 h’ test under 100 mA cm^?2. Therefore, CoNiP–V is promising for the development of efficient water splitting catalysts.     

Bimetallic metal-organic framework derived electrocatalyst for efficient overall water splitting

The development of bifunctional catalysts that can be applied to both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is widely regarded as a key factor in the production of sustainable hydrogen fuel by electrochemical water splitting. In this work, we present a high-performance electrocatalyst based on nickel-cobalt metal-organic frameworks for overall water splitting. The as-obtained catalyst shows low overpotential to reaches the current density of 10 mA cm⁻² with 249 mV for OER and 143 mV for HER in alkaline media, respectively. More importantly, when the electrolyzer was assembled with the as-prepared catalyst as anode and cathode simultaneously, it demonstrates excellent activity just applies a potential of 1.68 V to achieve 10 mA cm⁻² current density for overall water splitting.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Preparation of NiCo-LDH@NiCoV-LDH interconnected nanosheets as high-performance electrocatalysts for overall water splitting

Alkaline water electrolysis is a promising strategy for the production of hydrogen and oxygen. However, developing high-efficiency non-precious electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is still a big challenge. Here, we report a nickel foam-based electrode coated with NiCoV-LDH and NiCo-LDH nanosheets (denoted as NiCo-LDH@NiCoV-LDH/NF) by a two-step method for efficient water splitting performance. The NiCo-LDH@NiCoV-LDH/NF with unique nanosheet-on-nanosheet construction can enlarge the electrochemical active specific surface area greatly, and thus accelerate the charge transfer of electrocatalytic reactions. Besides, the doping of vanadium could also improve the OER performance. The electrode only requires a low overpotential for OER (260 mV at 100 mA cm^?2), and HER (80 mV at 10 mA cm^?2) reactions in 1.0 mol/L KOH solution at room temperature. Furthermore, in the two-electrode water splitting test, a current density of 10 mA cm^?2 was achieved at 1.55 V using 1.0 mol/L KOH solution, with excellent durability of 40 h. This work provided a facile method for developing new bifunctional catalysts.     

A novel in-situ strategy develops for Mo2C nanoparticles incorporated on N,P co-doped stereotaxically carbon as efficient electrocatalyst for overall water splitting

Developing cost-effective and remarkable electrocatalysts toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performs excelling role in boosting the hydrogen energy application. Herein, a novel in-situ one-pot strategy is developed for the first time to synthesize molybdenum carbide nanoparticles (Mo₂C NPs) incorporated on nitrogen (N) and phosphorous (P) co-doped stereotaxically carbon (SC). The optimized Mo₂C NPs/N, P–SC–800 electrocatalyst exhibits lower overpotentials of 131 and 287 mV for HER and OER to deliver a current density of 10 mA cm^?2 in 1.0 M KOH medium with smaller Tafel slopes of 58.9 and 74.4 mV/dec, respectively. In addition, an electrolyzer using Mo₂C NPs/N, P–SC–800 electrode as cathode and anode delivers a current density of 10 mA cm^?2 at a small voltage of 1.64 V for overall water splitting. The excellent water splitting performance could be ascribed to optimum Mo₂C NPs for more accessible active sites, highly active N, P-SC networks for accelerated electron transfers, and synergetic effect between Mo₂C NPs and N, P-SC networks. The N, P-SC network not only enhances the overall dispersion of Mo₂C NPs but also contributes numerous electroactive edges to enhance the performance of HER, OER, and overall water splitting activity. This research work explores the in-situ one-step strategies of advanced, cost-effective, and non-precious metal electrocatalysts for efficient water splitting and motivates the consideration of a novel class of heteroatom doped stereotaxically carbon nanocomposites for sustainable energy production.     

Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

Structure-design and synthesis of nickel-cobalt oxide/sulfide/phosphide composite nanowire arrays for efficient overall water splitting

The construction of cost-effective bifunctional electrocatalysts with the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is significant for efficient overall water splitting. Herein, this work demonstrates a novel strategy for the synthesis of nickel-cobalt oxides/sulfides/phosphides composite (denoted as NiCoO–2P/S) nanoarrays on Ni foam. In this method, Ni–Co bimetallic oxide nanowires on Ni foam were partially phosphorized and sulfurized simultaneously in situ to yield Ni–Co oxide/sulfide/phosphide composite. The NiCoO–2P/S arrays have good interfacial effects and display many holes in the nanowires, giving it the advantage of large accessible surfaces on the nanowires and a beneficial for the release of gas bubbles, resulting in an excellent OER performance with a low overpotential (η) of 254 mV at 100 mA cm^?2 and good HER activity (η₁₀ = 143 mV at 10 mA cm^?2). The electrocatalytic test results demonstrate small Tafel slopes (82 mV dec^?1 for HER, 88 mV dec^?1 for OER) and the satisfying durability in an alkaline electrolyte, indicating that the HER and OER activity was enhanced by the introduction of the Ni/Co sulfides and phosphides into Ni–Co oxides composite nanowires. Furthermore, the as-prepared NiCoO–2P/S catalyst can be used as both the anode and the cathode simultaneously to realize overall water splitting in the two-electrode electrolyzer. This system can be driven at low cell voltages of 1.50 and 1.68 V to achieve current densities of 10 and 100 mA cm^?2, respectively. This work provides an alternative strategy to prepare high-performance bifunctional electrochemical materials and demonstrates the advantages of Ni–Co oxide/sulfide/phosphide composites for water splitting.     

Thin-film iron-oxide nanobeads as bifunctional electrocatalyst for high activity overall water splitting

Developing only Fe derived bifunctional overall water splitting electrocatalyst both for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) while performing at low onset overpotential and with high catalytic stability is a rare instance. We present here the first demonstration of unique iron-oxide nanobeads (FeO_x-NBs) based electrocatalyst executing both OER and HER with high activity. Thin-film electrocatalytic FeO_x-NBs assembly is surface grown via simple spray coating (SC). The unique SC/FeO_x-NBs propels OER initiating water oxidation just at 1.49 V_RHE (η = 260 mV) that is the lowest observable onset potential for OER on simple Fe-oxide based catalytic films reported so far. Catalyst also reveals decently high HER activity and competent overall water splitting performance in the FeO_x-NBs two-electrode system as well. Catalyst also presents stable kinetics, with promising high electrochemically active surface area (ECSA) of 1765 cm², notable Tafel slopes of just 54 mV dec^1? (OER) and 85 mV dec^1? (HER), high exchange current density of 1.10 mA cm^2? (OER), 0.58 mA cm^2? (HER) and TOF of 74.29s^1?@1.58V_RHE, 262s^1?@1.62V_RHE (OER) and 82.5s^1?@-0.45V_RHE, 681s^1?@-0.56V_RHE (HER).     

Spatially confined growth of ultrathin NiFe layered double hydroxide nanosheets within carbon nanofibers network for highly efficient water oxidation

The rational design of catalysts with low cost, high efficient and robust stability toward oxygen evolution reaction (OER) is greatly desired but remains a formidable challenge. In this work, a one-pot, spatially confined strategy was reported to fabricate ultrathin NiFe layered double hydroxide (NiFe-LDH) nanosheets interconnected by ultrafine, strong carbon nanofibers (CNFs) network. The as-fabricated NiFe-LDH/CNFs catalyst exhibits enhanced OER catalytic activity in terms of low overpotential of 230 mV to obtain an OER current density of 10 mA cm^?2 and very small Tafel slope of 34 mV dec^?1, outperforming pure NiFe-LDH nanosheets assembly, commercial RuO₂, and most non-noble metal catalysts ever reported. It also delivers an excellent structural and electrocatalytic stability upon the long-term OER operation at a large current of 30 mA cm^?2 for 40 h. Furthermore, the cell assembled by using NiFe-LDH/CNFs and commercial Pt/C as anode (+) and cathode (?) ((+)NiFe-LDH/CNFs||Pt/C(?)) only requires a potential of 1.50 V to deliver the water splitting current of 10 mA cm^?2, 130 mV lower than that of (+)RuO₂||Pt/C(?) couple, demonstrating great potential for applications in cost-efficient water splitting devices.     

Three-dimensional Ni/Fe doped graphene oxide @ MXene architecture as an efficient water splitting electrocatalyst

Developing a highly efficient, stable, and earth-abundant electrocatalyst for both HER and OER is essential for water splitting. Herein, we report a bifunctional electrocatalyst in the form of iron/nickel doped graphene oxide @ MXene (GMX). The GMX-based electrocatalytic materials were prepared by annealing at different temperatures in an inert atmosphere. The GMX was characterized by various analytical tools such as PXRD, FE-SEM, HRTEM, Raman spectroscopy, and XPS. All the electrocatalysts exhibit high activity when acting as OER and HER catalyst in alkaline and acidic electrolytes. GMX-500 is considered an effective bifunctional electrocatalyst, and 10 mA cm^?2 current density is achieved at a low overpotential, i.e., 370 mV for OER and 470 mV for HER, respectively. This paper focuses on the progress of inexpensive and effective electrocatalysts with high activity and long-term durability for water splitting, which is relevant in power conservation.     

One-pot solvothermal synthesis of Co2P nanoparticles: An efficient HER and OER electrocatalysts

Development of an inexpensive electrocatalyst for hydrogen evolution (HER) and oxygen evolution reactions (OER) receives much traction recently. Herein, we report a facile one-pot ethyleneglycol (EG) mediated solvothermal synthesis of orthorhombic Co₂P with particle size ~20–30 nm as an efficient HER and OER catalysts. Synthesis parameters like various solvents, temperatures, precursors ratios, and reaction time influences the formation of phase pure Co₂P. Investigation of Co₂P as an electrocatalyst for HER in acidic (0.5 M H₂SO₄) and alkaline medium (1.0 M KOH), furnishes low overpotential of 178 mV and 190 mV, respectively to achieve a 10 mA cm^?2 current density with a long term stability and durability. As an OER catalyst in 1.0 M KOH, Co₂P shows an overpotential of 364 mV at 10 mA cm^?2 current density. Investigation of Co₂P NP by XPS analysis after OER stability test under alkaline medium confirms the formation of amorphous cobalt oxyhydroxide (CoOOH) as an intermediate during OER process.     

Superhydrophilic 3D peony flower-like Mo-doped Ni2S3@NiFe LDH heterostructure electrocatalyst for accelerating water splitting

Constructing highly efficient nonprecious electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is essential to improve the efficiency of overall water splitting, but still remains lots of obstacles. Herein, a novel 3D peony flower-like electrocatalyst was synthesized by employing Mo–Ni₂S₃/NF nanorod arrays as scaffolds to in situ growth ultrathin NiFe LDH nanosheets (Mo-Ni₂S₃@NiFe LDH). As expected, the novel peony flower-like Mo–Ni₂S₃@NiFe LDH displays superior electrocatalytic activity and stability for both OER and HER in alkaline media. Low overpotentials of only 228 mV and 109 mV are required to achieve the current densities of 50 mA cm^?2 and 10 mA cm^?2 for OER and HER, respectively. Additionally, the material remarkably accelerates water splitting with a low voltage of 1.54 V at 10 mA cm^?2, which outperforms most transition metal electrodes. The outstanding electrocatalytic activity benefits from the following these features: 3D peony flower-like structure with rough surface provides more accessible active sites; superhydrophilic surfaces lead to the tight affinity between electrode with electrolyte; metallic Ni substrate and highly conductive Mo–Ni₂S₃ nanorods scaffold together with offer fast electron transfer; the nanorod arrays and porous Ni foam accelerate gas bubble release and ions transmission; the strong interfacial effect between Mo-doped Ni₃S₂ and NiFe LDH shortens transport pathway, which are benefit for electrocatalytic performance enhancement. This work paves a new avenue for construction and fabrication the 3D porous structure to boost the intrinsic catalytic activities for energy conversion and storage applications.